ARD 3.4 + 10.5 Server to 10.4/5 Server = Black Screen

This sort of a reposting of a locked/archived post at...
http://discussions.apple.com/thread.jspa?threadID=2413768
I'm reposting this because the prior post's solution fixes my exact issue: change Ethernet MTU from 9000 (Jumbo) to "Standard" (1500).
I don't want to change MTU on my primary fileserver, since I'm looking to squeeze every ounce of performance out of it.
Note: I do not see this black screen issue using ARB 3.4 from my 10.6.6 client to any machines.
Hopefully, others find this helpful.
Message was edited by: O solo Mac O

Like I said, the solution from previous post addresses this very same issue.

Similar Messages

LXDE, vino-server, black screen on connection to Arch desktop

Hi all, yet another Arch newb question.
I started vino-server on my Arch LXDE desktop. I accidentally started it as a foreground process, but the advantage is that I can see it running.
I used dconf editor to DISABLE the "encryption required" setting for desktop sharing. (I've tried it both ways - enabled and disabled - same result.)
xtightvncviewer run from Chrubuntu on my laptop from the command line shows a successful connection, and I can see vino-server accepting the connections over on my Arch desktop.
But any graphical viewer on my laptop shows a black screen.
I don't see anything here on the forums and didn't find anything good via Google.

This appears to have been an issue with the 10.5.5 upgrade. The server showed 10.5.4 and Software Update showed me up to date. I manually downloaded the 10.5.5 combo update and installed it. I had kernal panics on 3 separate restarts afterward, but on the 4th try the machine booted and ARD visibility was restored. No more remote system updates for me, I'm doing all of them while I'm at the machine.
Thanks,
Kyle

Windows Server 2008 black screen with mouse *PLEASE HELP*

Hello fellow techs,
I have been tearing my hair out for the past 12hrs on this issue.
About 3 weeks ago, one of our clients reported that they were experiencing
issues on the network so one of the staff went into the server room and noticed
the screen was black with only the cursor. As they couldn't reboot, they
decided to hold the power button to power it off. When they powered it back
up, it went passed the windows loading
splash screen, and again the screen is black with
the mouse pointer in the center of the screen.
I am diagnosing the server and find that at the black screen, I’m able to move
the cursor and beyond that nothing happened. I started in safe mode with the
exact same results.
I have been trying many different solutions from posts that I have found in
Google but no change.
From other machines you can type \\servername in
the run box and see the shared folders, as well as ping it.
This is a very urgent request as I need to have the Server back up and running
by tomorrow.
I am quiet willing to pay for phone support with anyone that can assist as soon
as possible. I am happy to transfer founds via Paypal.<o:p></o:p>
PLEASE HELP!

Hi,
I agree with sm, you should give us more details. Also you should use sfc /scannow
command to scans the integrity of all protected system files and repairs files with problems when possible. For more details, please refer to the following article.
Sfc
http://technet.microsoft.com/en-us/library/ff950779.aspx
Before going further, would you please let me know whether there were any changes on the affected server? Has windows update or any new device been added? Please also check your shadow copies.
The Windows Server black screen may be caused by them.
In addition, there are similar questions, please refer to.
Windows Server 2008 black screen
http://social.technet.microsoft.com/Forums/en-US/463b529b-26a6-4d5d-88f5-7d8b3460d165/black-screen-windows-2008-r2
Windows Server 2008 and the Black Screen of Waiting
http://projectdream.org/wordpress/2009/03/03/windows-server-2008-and-the-black-screen-of-waiting/
By a way, you also can be able to boot into last know good configuration to solve the trouble. You can refer to the following similar question that provide the detailed operations.
Windows Server 2008 black screen with only the mouse pointer showing
http://social.technet.microsoft.com/Forums/en-US/5c878af8-78f2-430d-9530-a0e5ad73ff03/windows-server-2008-black-screen-with-only-the-mouse-pointer-showing
Hope this helps.
Best regards,
Justin Gu

Blank/Black screen when connecting to server

When I try to use ARD to connect to my XServe all I get is a black screen. For some reason though using VNC from a PC works fine. Any thoughts?

Just to follow this up, found that having jumb frames enabled was causing this. Change the frame size back to 1500 and it works fine.

How to get ARD to control xserve osx server 10.5?

can anyone tell me what you have to enable so you can control server with ARD?

Hi
On the Server go to System Preferences > Sharing > Remote Management. Untick Screen Sharing. If Remote Login (SSH) is ticked, untick it. Unless of course you are aware of the potential security risk inherent with this. If you are leave it on.
Install ARD on another mac - the one you are using for example. Launch it, supply the serial number. Don't bother with a task server (this might be a step too far for you at this stage). Create an admin name and password (I suggest admin and admin - keeps it simple that way) and you should be looking at the ARD main window.
By default and the first time it's launched it will scan the network using Bonjour. You can select this and change it to Local Network. Either one will do. Explore the interface to see what it does. There is a fairly useful online Help available as well. You could also consult the ARD Forum:
http://discussions.apple.com/forum.jspa?forumID=1007
By now you should 'see' your server or at the least its IP Address - which you should know? Select it and then select Control. You'll be prompted to enter the Server's admin account details (username and password). Once you supply these you should now be looking at the Server's Desktop. If your client mac is Leopard you don't even need to use ARD. You should be able to 'discover' the Server in the Shared part of the Finder's Sidebar. You should see an option to Share Screen. Clicking on this will present you with a login window. Again supply the server's admin name and password.
Finally you can vnc to the Server using a web browser. Safari would do, but you can use any other browser if you wish. In the url key in vnc://IPaddressofyourserver. You'll know you've been successful when you see the login prompt. Again supply the server's admin name and password.
Tony

Xorg-server 1.6 - black screen with mouse cursor

Hi
First of all: I'm really new to Arch, so maybe there is a real easy fix for this problem
Since upgrading to xorg-server 1.6 (and today to 1.6.1) I'm not able to get a running Desktop Environment.
Usually I am using gnome with compiz-fusion on my Geforce 4 (nvidia-96xx 96.43.11-4 driver).
When I boot my machine i see gdm and I am able to login. I can hear my login sound but I only get a black screen with a mouse cursor.
I added a new test user to my system without compiz and get the same.
I tried my old xorg.conf from 1.5, generated a new one with X -configure and tried without xorg.conf but everytime the same
Actually I'm not sure if the xorg update is responsible for this, because i did not watch the upgrade-process....
I googled this problem and was searching similar things in this froum, but I wasn't able to find something
Here are some files
xorg.conf (i know there are some bullshit things in it, but it was workig )
# File generated by xorgconfig.
# Copyright 2004 The X.Org Foundation
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the "Software"),
# to deal in the Software without restriction, including without limitation
# the rights to use, copy, modify, merge, publish, distribute, sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions:
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
# The X.Org Foundation BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
# Except as contained in this notice, the name of The X.Org Foundation shall
# not be used in advertising or otherwise to promote the sale, use or other
# dealings in this Software without prior written authorization from
# The X.Org Foundation.
# Refer to the xorg.conf(5x) man page for details about the format of
# this file.
# Module section -- this section is used to specify
# which dynamically loadable modules to load.
Section "Module"
# This loads the DBE extension module.
Load "dbe" # Double buffer extension
# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection
# This loads the font modules
# Load "type1"
# Load "freetype"
# Load "xtt"
# This loads the GLX module
Load "glx"
# This loads the DRI module
# Load "dri"
EndSection
# Files section. This allows default font and rgb paths to be set
Section "Files"
# The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
# RgbPath "/usr/share/X11/rgb"
# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
FontPath "/usr/share/fonts/misc/"
FontPath "/usr/share/fonts/TTF/"
# FontPath "/usr/share/fonts/OTF"
FontPath "/usr/share/fonts/Type1/"
FontPath "/usr/share/fonts/100dpi/"
FontPath "/usr/share/fonts/75dpi/"
FontPath "/usr/lib/X11/fonts/local/"
FontPath "/usr/lib/X11/fonts/misc/"
FontPath "/usr/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/lib/X11/fonts/100dpi/:unscaled"
# FontPath "/usr/lib/X11/fonts/Speedo/"
FontPath "/usr/lib/X11/fonts/Type1/"
# FontPath "/usr/lib/X11/fonts/TrueType/"
# FontPath "/usr/lib/X11/fonts/freefont/"
FontPath "/usr/lib/X11/fonts/75dpi/"
FontPath "/usr/lib/X11/fonts/100dpi/"
# The module search path. The default path is shown here.
# ModulePath "/usr/lib/modules"
EndSection
# Server flags section.
Section "ServerFlags"
# Uncomment this to cause a core dump at the spot where a signal is
# received. This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging
# Option "NoTrapSignals"
# Uncomment this to disable the <Ctrl><Alt><Fn> VT switch sequence
# (where n is 1 through 12). This allows clients to receive these key
# events.
# Option "DontVTSwitch"
# Uncomment this to disable the <Ctrl><Alt><BS> server abort sequence
# This allows clients to receive this key event.
# Option "DontZap"
# Uncomment this to disable the <Ctrl><Alt><KP_+>/<KP_-> mode switching
# sequences. This allows clients to receive these key events.
# Option "Dont Zoom"
# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.
# Option "DisableVidModeExtension"
# Uncomment this to enable the use of a non-local xvidtune client.
# Option "AllowNonLocalXvidtune"
# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings.
# Option "DisableModInDev"
# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).
# Option "AllowNonLocalModInDev"
EndSection
# Input devices
# Core keyboard's InputDevice section
Section "InputDevice"
Identifier "Keyboard1"
Driver "kbd"
# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.
# Option "Protocol" "Xqueue"
Option "AutoRepeat" "500 30"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"
# Option "LeftAlt" "Meta"
# Option "RightAlt" "ModeShift"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc105"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# These are the default XKB settings for Xorg
# Option "XkbRules" "xorg"
# Option "XkbModel" "pc105"
# Option "XkbLayout" "us"
# Option "XkbVariant" ""
# Option "XkbOptions" ""
# Option "XkbDisable"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "de"
Option "XkbVariant" "nodeadkeys"
EndSection
# Core Pointer's InputDevice section
Section "InputDevice"
# Identifier and driver
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "IMPS/2" # PS/2 Mouse
Option "Device" "/dev/psaux"
Option "Buttons" "5"
Option "ZAxisMapping" "4 5"
# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.
# Option "Protocol" "Xqueue"
# Mouse-speed setting for PS/2 mouse.
# Option "Resolution" "256"
# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.
# Option "BaudRate" "9600"
# Option "SampleRate" "150"
# Mouse wheel mapping. Default is to map vertical wheel to buttons 4 & 5,
# horizontal wheel to buttons 6 & 7. Change if your mouse has more than
# 3 buttons and you need to map the wheel to different button ids to avoid
# conflicts.
Option "ZAxisMapping" "4 5 6 7"
# Emulate3Buttons is an option for 2-button mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)
# Option "Emulate3Buttons"
# Option "Emulate3Timeout" "50"
# ChordMiddle is an option for some 3-button Logitech mice
# Option "ChordMiddle"
EndSection
# Other input device sections
# this is optional and is required only if you
# are using extended input devices. This is for example only. Refer
# to the xorg.conf man page for a description of the options.
# Section "InputDevice"
# Identifier "Mouse2"
# Driver "mouse"
# Option "Protocol" "MouseMan"
# Option "Device" "/dev/mouse2"
# EndSection
# Section "InputDevice"
# Identifier "spaceball"
# Driver "magellan"
# Option "Device" "/dev/cua0"
# EndSection
# Section "InputDevice"
# Identifier "spaceball2"
# Driver "spaceorb"
# Option "Device" "/dev/cua0"
# EndSection
# Section "InputDevice"
# Identifier "touchscreen0"
# Driver "microtouch"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "1412"
# Option "MaxX" "15184"
# Option "MinY" "15372"
# Option "MaxY" "1230"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
# Section "InputDevice"
# Identifier "touchscreen1"
# Driver "elo2300"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "231"
# Option "MaxX" "3868"
# Option "MinY" "3858"
# Option "MaxY" "272"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonThreshold" "17"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
# Monitor section
# Any number of monitor sections may be present
Section "Monitor"
Identifier "Eizo"
# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
HorizSync 24.8-80
# HorizSync 30-64 # multisync
# HorizSync 31.5, 35.2 # multiple fixed sync frequencies
# HorizSync 15-25, 30-50 # multiple ranges of sync frequencies
# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
VertRefresh 50-75
EndSection
# Graphics device section
# Any number of graphics device sections may be present
# Standard VGA Device:
Section "Device"
Identifier "Standard VGA"
VendorName "Unknown"
BoardName "Unknown"
# The chipset line is optional in most cases. It can be used to override
# the driver's chipset detection, and should not normally be specified.
# Chipset "generic"
# The Driver line must be present. When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module. Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.
Driver "vga"
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for. When this line isn't present, a device
# section can only match up with the primary video device. For PCI
# devices a line like the following could be used. This line should not
# normally be included unless there is more than one video device
# intalled.
# BusID "PCI:0:10:0"
# VideoRam 256
# Clocks 25.2 28.3
EndSection
# Device configured by xorgconfig:
Section "Device"
Identifier "GeForce4"
# Driver "nv"
Driver "nvidia"
#VideoRam 131072
# Insert Clocks lines here if appropriate
EndSection
# Screen sections
# Any number of screen sections may be present. Each describes
# the configuration of a single screen. A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
Section "Screen"
Identifier "Screen 1"
Device "GeForce4"
Monitor "Eizo"
DefaultDepth 24
Option "AddARGBGLXVisuals" "true"
Subsection "Display"
Depth 8
Modes "1280x1024" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 16
Modes "1280x1024" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 24
Modes "1280x1024" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
EndSection
# ServerLayout sections.
# Any number of ServerLayout sections may be present. Each describes
# the way multiple screens are organised. A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option. In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.
Section "ServerLayout"
# The Identifier line must be present
Identifier "Simple Layout"
# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens. The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen. In this example, screen 2 is located to the
# right of screen 1.
Screen "Screen 1"
# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used. Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
# Section "DRI"
# Mode 0666
# EndSection
Section "Extensions"
Option "Composite" "enable"
EndSection
Xorg.0.log
X.Org X Server 1.6.1
Release Date: 2009-4-14
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.29-ARCH i686
Current Operating System: Linux delirium 2.6.29-ARCH #1 SMP PREEMPT Wed Apr 8 12:47:56 UTC 2009 i686
Build Date: 15 April 2009 11:09:10AM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Apr 15 23:20:32 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Simple Layout"
(**) |-->Screen "Screen 1" (0)
(**) | |-->Monitor "Eizo"
(**) | |-->Device "GeForce4"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/lib/X11/fonts/local/" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/lib/X11/fonts/misc/" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/lib/X11/fonts/75dpi/" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/lib/X11/fonts/100dpi/" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/lib/X11/fonts/Type1/" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/lib/X11/fonts/75dpi/" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/lib/X11/fonts/100dpi/" does not exist.
Entry deleted from font path.
(**) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/,
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1,
built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(**) Extension "Composite" is enabled
(WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
(WW) Disabling Mouse1
(WW) Disabling Keyboard1
(II) Loader magic: 0x1a40
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 5.0
X.Org XInput driver : 4.0
X.Org Server Extension : 2.0
(II) Loader running on linux
(++) using VT number 7
(--) PCI:*(0@3:0:0) nVidia Corporation NV25 [GeForce4 Ti 4200] rev 163, Mem @ 0xe5000000/16777216, 0xd0000000/134217728, 0xd8000000/524288, BIOS @ 0x????????/131072
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded by default.
(II) "dri" will be loaded by default.
(II) "dri2" will be loaded by default.
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Server Extension
(II) NVIDIA GLX Module 96.43.11 Mon Feb 23 15:43:14 PST 2009
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "nvidia"
(II) Loading /usr/lib/xorg/modules/drivers//nvidia_drv.so
(II) Module nvidia: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Video Driver
(II) NVIDIA dlloader X Driver 96.43.11 Mon Feb 23 15:32:04 PST 2009
(II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
(II) Primary Device is: PCI 03@00:00:0
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(0): Option "AddARGBGLXVisuals" "true"
(**) NVIDIA(0): Enabling RENDER acceleration
(II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
(II) NVIDIA(0): enabled.
(II) NVIDIA(0): NVIDIA GPU GeForce4 Ti 4200 at PCI:3:0:0 (GPU-0)
(--) NVIDIA(0): Memory: 131072 kBytes
(--) NVIDIA(0): VideoBIOS: 04.25.00.34.00
(II) NVIDIA(0): Detected AGP rate: 4X
(--) NVIDIA(0): Interlaced video modes are supported on this GPU
(--) NVIDIA(0): Connected display device(s) on GeForce4 Ti 4200 at PCI:3:0:0:
(--) NVIDIA(0): EIZO L578 (DFP-0)
(--) NVIDIA(0): EIZO L578 (DFP-0): 165.0 MHz maximum pixel clock
(--) NVIDIA(0): EIZO L578 (DFP-0): External Single Link TMDS
(II) NVIDIA(0): Assigned Display Device: DFP-0
(II) NVIDIA(0): Validated modes:
(II) NVIDIA(0): "1280x1024"
(II) NVIDIA(0): "1024x768"
(II) NVIDIA(0): "800x600"
(II) NVIDIA(0): "640x480"
(II) NVIDIA(0): Virtual screen size determined to be 1280 x 1024
(--) NVIDIA(0): DPI set to (95, 96); computed from "UseEdidDpi" X config
(--) NVIDIA(0): option
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) NVIDIA(0): Initialized GART.
(II) NVIDIA(0): Setting mode "1280x1024"
(II) Loading extension NV-GLX
(II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized
(II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture
(==) NVIDIA(0): Backing store disabled
(==) NVIDIA(0): Silken mouse enabled
(II) NVIDIA(0): DPMS enabled
(II) Loading extension NV-CONTROL
(==) RandR enabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing extension GLX
(II) config/hal: Adding input device Macintosh mouse button emulation
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 2.2.1
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00
(**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms
(**) Macintosh mouse button emulation: (accel) set acceleration profile 0
(II) config/hal: Adding input device ImPS/2 Logitech Wheel Mouse
(**) ImPS/2 Logitech Wheel Mouse: always reports core events
(**) ImPS/2 Logitech Wheel Mouse: Device: "/dev/input/event6"
(II) ImPS/2 Logitech Wheel Mouse: Found 3 mouse buttons
(II) ImPS/2 Logitech Wheel Mouse: Found x and y relative axes
(II) ImPS/2 Logitech Wheel Mouse: Found scroll wheel(s)
(II) ImPS/2 Logitech Wheel Mouse: Configuring as mouse
(**) ImPS/2 Logitech Wheel Mouse: YAxisMapping: buttons 4 and 5
(**) ImPS/2 Logitech Wheel Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "ImPS/2 Logitech Wheel Mouse" (type: MOUSE)
(**) ImPS/2 Logitech Wheel Mouse: (accel) keeping acceleration scheme 1
(**) ImPS/2 Logitech Wheel Mouse: (accel) filter chain progression: 2.00
(**) ImPS/2 Logitech Wheel Mouse: (accel) filter stage 0: 20.00 ms
(**) ImPS/2 Logitech Wheel Mouse: (accel) set acceleration profile 0
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device saa7134 IR (LifeView FlyVIDEO30
(**) saa7134 IR (LifeView FlyVIDEO30: always reports core events
(**) saa7134 IR (LifeView FlyVIDEO30: Device: "/dev/input/event5"
(II) saa7134 IR (LifeView FlyVIDEO30: Found keys
(II) saa7134 IR (LifeView FlyVIDEO30: Configuring as keyboard
(II) XINPUT: Adding extended input device "saa7134 IR (LifeView FlyVIDEO30" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
Last edited by MueLLe (2009-04-15 21:35:42)

I'm having a very similar issue. Sometimes, when I boot and type in startx (I'm not even a GNOME user--I use dwm and no graphical login manager), I just get a black screen. No mouse cursor, so I think X doesn't even load. It only started with the xserver 1.6 update and the update to that hasn't changed anything. What I've been doing is just rebooting until it loads normally (takes one to three times). Is anyone else having this problem?

Server 2008 crash - black screen with mouse cursor

dell poweredge 2950 with Perc 5/I RAID, ESXi 4.1 host, Windows Server 2008 R2 SP1 VM
After swapping out a failed raid5 drive this vm began displaying inpage operation error popups while checking folder permissions. event viewer errors:
The file system structure on the disk is corrupt and unusable. Please run the chkdsk utility on the volume \Device\HarddiskVolume2.
The file system structure on the disk is corrupt and unusable. Please run the chkdsk utility on the volume C:.
chkdsk /r run from the win2k8r2sp1 install dvd command line resulted in more corrections than i was able to screenshot:
After this the server would only boot to black screen with mouse cursor. same black screen result in safe mode or directory services restore mode. sfc /scannow, startrep, and registry repair from the folder contents @ c:\windows\system32\config\regback
have been attempted with no improvement. I am still able to access the filesystem contents using the command line from the win2k8r2sp1 installation DVD - user + registry files copied over to another drive without problem and i was able to load
the registry hive on another system. This server was doing dns, domain controller and certification authority but the only important item is getting the CA back somehow. Any suggestions are welcome.

Hi,
According the information you have provided, the file system is broken.
After the repair, do chkdsk /r and sfc /scannow give any warning or error?
If yes, it means that the file system and system file are not repaired. Please post the error or warning here. It may give some hints.
Best Regards.
Steven Lee
TechNet Community Support

Cursor and black screen on XFree86 server with DirectFb backend

Hi all.
I need to bring up lightweight XFree86 server with DirectFB as video backend on CE Linux (Intel Set Top Box). For now I've done following:
1. Compiled and tested DirectFB with multi application support (fusion library).
2. Compiled XFree86 with DirectFB as backend.
3. X based applications (xclock, for example) can be drawn from device on remote display after exporting DISPLAY variable.
4. XDirectFB server can be started successfully without errors.
I faced with following X server problems:
1. I can see only black display with active graphic mouse cursor once I started X server and any X application (xclock, for example). Its looks like application windows are drawn but invisible on a screen. When I moving mouse, cursor changes from arrow to resize or others icons.
2. When I try to use XFree86 as remote X server for drawing, client program issue XRandr command is not supported. Again I can see blank black screen and valid mouse cursor, which seems manage invisible windows.
3. XFree86 manuals points that X server uses configuration files /etc/X11/xorg.conf or /etc/X11/XF86Config for video/input devices settings. Does XFree86 with DirectFB video backend use such configuration files? Which one? What video driver should I define there? I have tried both of configuration files without success. It seems X server ingoring them.
Appreciate advices, suggestions and visions.
Please note me if additional information requires.
Medvic.

I have discovered solutions for my problems (unfortunaly not causes). Hope this helps someone.
1. I can see only black display with active graphic mouse cursor once I started X server
I have found that XDirectFB binary accepts 'defaultOpacity' (default opacity for created top level windows)argument which can vary in <1-255> range. Value 1 corresponds to full invisibility windows state and 255 to zero opacity. It seems 255 is default value for opacity, but in my case screen still black/blank. I set 254 opacity and wow! Its a miracle - I can see windows!!!
2. When I try to use XFree86 as remote X server for drawing ... I can see blank black screen and valid mouse cursor
Now I can use my X server for rendering remote client's graphic applications.
3. ... Does XFree86 with DirectFB video backend use such configuration files? Which one? What video driver should I define there?
It seems indeed XDirectFB server doesn't use any configuration files. For my case X server normally starts without configuration files.
If you have any questions or need some clarifications, please contact me.
Regards, Medvic.
Last edited by medvic (2009-12-30 22:24:32)

Upgraded Mavericks 10.9.4 reverted to old OS X Lion Server login screen on cold boot

Mac Pro
Early 2008
Model Identifier: MacPro3,1
Processor 2 x 2.8 GHz Quad-Core Intel Xeon
Memory 16 GB 667 MHz DDR2 FB-DIMM
Graphics ATI Radeon HD 2600 XT 256 MB
Software OS X 10.9.4 (13E28)
Boot ROM Version: MP31.006C.B05
SMC Version (system): 1.25f4
This is the first time I've encountered this. Upon cold booting the machine it went directly to the legacy Mac OS X Server login screen from before the upgrade to Mavericks. It would not let me login with current credentials. I had no choice but to hard power off. It returned to normal operation on restart.
It could be a possible bug.

This happened for the second time today. Another thing I noticed was there was no Apple chime on boot. Upon restart the machine started with the Apple chime and went into the Mavericks login screen.

Black Screen on a RDP Session on a Windows 8 VM (with a RemoteFX 3D Card) running on Windows Server 2012 HyperV

Hi,
I am trying to test a Windows 8 VM (RTM) with a RemoteFX 3D adapter (I used Powershell command to add the RemoteFX adapter to the VM) and when I connect the machine with the RDP Client (Windows Server 2012 RTM),
I just get a black screen.
Off course, I can not connect using VM Connect (because RemoteFX is enable in the VM).
I tested same configuration but this time with a Windows 7 VM and this time it's OK, RemoteFX working fine.
Any Idea will be apreciated :-)
Stanislas Quastana, Microsoft France http://blogs.technet.com/stanislas

I may have a solution for this which I am about to test.
My environment is 2012R2, Win8.1 VDI Machines on a Dell R720 with Nvidia GRID K2.
I've been trying to rollout VDI all week with everything working except RemoteFX.
On logon the screen is just black but if you press enter it continues to log on, it appears that the logon message text may be causing the issue so I have created a GPO for my template machines and client machines which disables require CTRL+ALT+DEL
and also deletes from the registry the logon message and logon text entries that are displayed on all machines, I figure the users will see this when logging onto their ThinPC machine before connecting to VDI so it's not needed twice.
CONFIRMED working!!

ARD 3 displaying black screen

I am running ARD 3 on my iMac to log into my power mac at work. I've been able to connect to the power mac but the display shows up as a black screen. it seems I have full control of the computer but I am unable to see anything. The problem seems to be with some setting on my Imac. I've been able to use a laptop to log in successfully with the display.

Well things got worse. Initially I could conenct to some clients but not the servers ??
Played around with it and found the answer. I thought it may be a network issue at the client end or possibly MTU size so played around with this and nothing.
SO - Changed the MTU size on MY machine in the network prefs and it all worked.
Just thought I'd post here as it may be useful to somebody.

Windows Server 2012r2 WDS capture image hangs at black screen

Ok so i upgraded my server to 2012r2 and i am using the boot.wim from windows8.1 pro iso. I create a deploy image and it boots up on my fujitsu stylistic machine. It also boots on my lenovo thinkpad yoga.
I go and create a capture image and at first fails so i added the usb3.0 lenovo dongle driver. It then shows me the windows logo and just hangs at black screen. I have downloaded the entire sccm driver package off lenovo site and nothing has
helped. It also does not load on the fujitsu machine either.
I have been going nuts any help is much appreciated
thanks
Dave

Hello,
Where did you get the original image? If you download it from MSDN or technet, can you provide the link?
And is update 1 integrated with the original image or you install it manually after installation?
In order to address the issue, we need collect some more informaiton.
Thank you.

Windows 2012 R2 Active Directory Server Blank Screen

I have a Windows 2003 Domain, I added a Server 2012 R2 to the domain. The 2012 R2 server is a hyper-v virtual machine. When promoting the server to a domain controller it hung on the process and I had to reboot the server. When
I log into the server now with the same account I was using when I promoted the server I get a black screen. When I hit the (ctrl-alt-del) button on the hyper-v console screen I see several option such as task manager but clicking on it doesn't bring
up anything. I can also sign out. If I log in using another admin account I have no issues. If I view the application log I see a 4006 Event Id:
The Windows logon process has failed to span a user application. .... C:\Windows\system32\userinit.exe.
If I boot in safemode I am able to logon with with problem account and see the normal safe mode screen. Also, BTW the DC promotion process completed without issues.
Thanks,

So here's the situation. The domain was windows 2000, I raised the functional level to 2003 in preparation for adding windows 2012 R2 Domain controllers. I created a hyper-v VM and promoted it to a domain controller. As I mentioned when I logged
on with the account I used to promote the the Windows 2012 R2 server to a domain controller I got a black screen. It is not a core server shell. The only thing I can do is hit the ctrl-alt-del button in the console window and sign out, switch user if I click
on task manger nothing happens.
I added a second w2k12 R2 server as domain controller and had the same issue. I tried logging in with my own account as I am an enterprise admin but I got a blank screen also. The only account I can get the GUI on is the original Administrator account
"Administrator". After comparing properties on that account to two other domain admin accounts I realized the Administrator account has a Delegation tab the other accounts don't. I've been using them without issues to administer the domain
and log onto the W2k3 domain controllers. But I can only assume it is related to the account properties on these accounts.
I tried creating two other domain admin account from one of the 2012 AD servers but same issue. One account was a copy of the Administrator account and the other I created from scratch and added it to the relevant groups.
I have seen something about registering the spn for these accounts which I haven't tired yet. It seems I am missing steps when creating domain administrators.
Some had suggested I had done a minimal install but I have IE so I don't think this is the case.

Switced from Full GUI installation to minimal server interface or server core and stucked on black screen with no option

hi.
i have a virtual machine running Windows Server 2012 R2 Data Center Edition, using Hyper-V technology, as a lab machine to test and practice core features.
I tried to test the ability of switching to Core (and even the Minimal Server Interface after stuck and revert!)
using Powershell commands as bellow:
Import-Module ServerManager
Uninstall-WindowsFeature Server-Gui-Shell -Restart
and it goes well until windows configured removal features and reboots. but
after that the VM will stuck in a black screen.
Tried to reach RUN TASK window to bring up CMD.EXE or any thing but even the ALT+CTRL+DEL (ALT+CTRL+END in VM) is not working and technically i cant do anything. considering CPU USAGE in hyper-V Manager is changing for the VM, i let the VM
work but after 2 hours i just got enough!
any idea why is this happening?
Thanks for helping and spending time on this.
some info about the situation:
( METHOD : http://blogs.technet.com/b/puneetvig/archive/2012/10/16/switch-between-full-and-core-in-windows-server-2012-using-powershell-3-0.aspx )
HOST Machine:
Windows Server 2012 R2
Edition: Data Center
Activation Status: Fully Activated
VM Machine:
Windows Server 2012 R2
Data Center Edition
first installation option: Full GUI
Running services : NONE
not activated (no need to activate since its just a lab VM)
Hyper-V Machine Generation 2

Hi 888ta8pa,
Did you install some server role or feature on this vm, Server 2012r2 server core support the following applicable roles, please uninstall the unsupported rule and feature
then try again.
Server Core is an installation option that is capable of the following server roles.
•Active Directory (AD)
•Active Directory Lightweight Directory Services (ADLDS)
•DHCP Server
•DNS Server
•File Services
•BITS Server
•BranchCache
•HyperV
•IIS
•Printing Services
•Streaming Media Services
•iSCSI
•Load Balancing
•MPIO
•qWave
•Telnet
•Unix Migration
•Active Directory Certificate Services
The related KB:
Server Core for Windows Server 2012 R2 and Windows Server 2012
http://msdn.microsoft.com/en-us/library/hh846323(v=vs.85).aspx
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

How to send STRG+ALT+DELETE throug ARD to a Win 2000 Server

Hello,
Just stuck, how do I send STRGALTDELETE through ARD via VNC-connection to a Win 2000 Server?
Had to restart the machine, but cannot log in now. Thanks for your help.
Jochen

same basic answer, but I'd recommend JollysfastVNC if you go the VNC route:
http://www.jinx.de/JollysFastVNC.html
Or CoRD instead of Microsoft's RDC for Mac
http://cord.sourceforge.net/
The CoRD/RDC is the route I'd go, by the way, since it works very well. It's one thing MS has included with Windows which Apple should have years ago.

ARD 3.4 + 10.5 Server to 10.4/5 Server = Black Screen

Similar Messages

Maybe you are looking for