ARD 3.5.1 Client not creating users

Hi,
We have recently purchased ARD 3.5.1 but the client installer is not creating the User we have specified in the create client installer wizard. After some research, there was a post saying that we should add a case for 10.7 in the makeuser file inside the client installer package. I have done that, and it created the user. That seemed to have solved that problem. But, another problem is that ARD will not connect to that client unless remote managment is unchecked and then checked again.
That all seemed to have made everything work fine. The problem is, this is not a fix. I have to do this on alot of systems and I do not want to have to uncheck and recheck remote management throughout the company.
Is this something that any of you are dealing with?
Why would we even have to edit the makeuser file. The case should have already been set on apples end. I also should not have to uncheck and recheck remote management in order to kickstart the service. This should all be already configured properly during the Create Client Installer wizard.
Any help or feedback would greatly be appreciated!
Thanks!
(Using ARD 3.5.1 & 10.7.2 machines)

Lion/ARD users,
I am also having issues with ARD and Lion.
I have done my Lion upgrades remotely via ARD. The Lion upgrades do ok and after install reboot I get remote connection back up again. However after running software update, which downloads ARD Client 3.5.1 my Apple Remove Desktop is no longer able to connect to the machine.
I also cannot access machine via VNC but can access it via SSH.
So it appears to be a problem with VNC ...
Here is the error:
So while ARD see the "fritz" client ok it cannot connect to it.
I have looked in Console log and there are no clues there about what is causing the problem.
I have install the ARD Admin 3.5 Update, so that does not help fix the problem.
I have 7 remote Mac I need to access to this is a signficant problem...
Cheers,
Zebity.

Similar Messages

SRM: Create Contact Person Could not create user; contact your system admin

Hi All,
First, I am not sure this question should be posted here, or SRM General. From my point of view, here is more suitable.
Our Problem:
Activity "Create Contact Person With Reference" error with message:
Step to reproduce:
1. Login to SRM JAVA as super administrator
2. Open tab "SRM Administration"
3. Using the current query, search for Business-Partner no: 30000725
4. Press "Create Contact Person with Reference"
5. Fill all required fields, tick "Is contact person" checkbox
6. Put: /SAPSRM/SUPPLIER as Role
7. Save
The following Message appear:
Could not create user; contact your system administrator
SPML Service error: Error reading request status. Display Help
Contact Person 2000000214 Created Successfully for BP 30000725 Display Help
E-mail was sent
The first error is intriguing. The username & password is created successfully in ABAP System (Our UME is in ABAP).
QUESTIONS:
1. What cause this problem? How to trace the error?
2. We want the user have portal role automatically. How to achieve that?
Thank you for any responses and helps.
SRM ABAP Version:
SRM_PLUS     700     0009     SAPKIBK209     SRM_PLUS for mySAP SRM
SRM_SERVER     700     0009     SAPKIBKV09     SRM_SERVER
SAP_ABA     701     0007     SAPKA70107     Cross-Application Component
SAP_BASIS     701     0008     SAPKB70108     SAP Basis Component
PI_BASIS     701     0007     SAPK-70107INPIBASIS     Basis Plug-In
SRM JAVA Version:
SRM JAVA: Release 7 SP Level 9.0
BP SRM: Release 7 SP Level 9.0
Edited by: Nur Agus Suryoko on Mar 11, 2011 11:36 AM
Version information added

Hi Fernando,
Can you please tell me how you resolved this issue ??
Regards,
Adren

ARD 3.3.2 does not create new reports

Hi all!
I am running ARD 3.3.2 on my MacBook Pro with Mac OS X 10.6.2
All my clients are on ARD client 3.3.2 as well but run Mac OS X 10.4.11 or 10.5.8.
Since I've updated to 10.6 and ARD 3.3.2 i am not able to create new reports (with rebuild with new data check box activated) on any client system. ARD starts the task and stays in the status "waiting for report data" (which is translated from its German version and might be called a little different in English).
And there it stays--- for a very long time until I get an task failed message.
All clients are in the same network segment as I am. I am able to observe and control all machines as well as copy and install software onto them. Clients have no firewall activated.
All clients have one Admin User installed , which is allowed to make full use of ARD functions. When adding the clients to my ARD Computer list I used this Admin User credentials.
Does the new ARD doesn't support older OSses any more??
Any ideas , how am I able to solve this and get reports going again???
Thanx
Holger
Message was edited by: Holger Bartsch (added some more detail to client setup)

I manage 400+ computers at a University using ARD 3.3.2 with Client 3.3.2. I can not generate reports and haven't been able ever since Snow Leopard came out. We also have a developer account and there is no upgrade or version 4 in the works. Perhaps Apple's focus on giving iChat remote access has made them forget about Apple Remote Desktop, which is a shame because it's such a wonderful product.
We've been looking at Net School Support [http://www.netsupportschool.com/audio.asp] It's not as robust, but I can't continue spending money on a product/company that doesn't care about it's customer's problems. In general Apple's enterprise software efforts seem to be losing functionality instead of improving. OS 9 ARD had audio chat features, non-freezing screen lock and of course, working report generation.

Impdp does not create user/schema

I'm an Oracle noob. I'm trying to copy (expdp/impdp) schema (no data) from one machine to another. I do not want any remapping. I just want empty table structure created on targetHOST.
Error I get is:
    ORA-39083: Object type PROCACT_SCHEMA failed to create with error:
    ORA-31625: Schema ZABBIX is needed to import this object, but is unaccessible
    ORA-01435: user does not exist
My understanding is that if the user performing import has 'IMPORT FULL DATABASE' privilege, it'll create the users/schemas in the targetHOST. I granted it to 'scott' and tried with that too, same error.
- DB version: SQL*Plus: Release 11.2.0.1.0 Production on Thu Oct 24 14:27:41 2013
- If it matters the DB version on sourceHOST is 11.2.0.***3***
- OS: Linux targetHOST 2.6.18-308.el5 #1 SMP Fri Jan 27 17:17:51 EST 2012 x86_64 x86_64 x86_64 GNU/Linux
Import errors:
    (0)oracle@targetHOST$ sqlplus system/manager
    SQL*Plus: Release 11.2.0.1.0 Production on Thu Oct 24 14:27:41 2013
    Copyright (c) 1982, 2009, Oracle. All rights reserved.
    SQL> select * from session_privs;
    PRIVILEGE
    IMPORT FULL DATABASE
    CREATE SESSION
    .......200 other privileges.......
    202 rows selected.
    SQL> ^D
    (0)oracle@targetHOST$
    (0)oracle@targetHOST$ impdp system/oracle123 directory=TEST_DIR dumpfile=ZABBIX.dmp logfile=impdpZabbix.log
    Import: Release 11.2.0.1.0 - Production on Thu Oct 24 14:14:51 2013
    Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
    Connected to: Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
    With the Partitioning, OLAP, Data Mining and Real Application Testing options
    Master table "SYSTEM"."SYS_IMPORT_FULL_01" successfully loaded/unloaded
    Starting "SYSTEM"."SYS_IMPORT_FULL_01": system/******** directory=TEST_DIR dumpfile=ZABBIX.dmp logfile=impdpZabbix.log
    Processing object type SCHEMA_EXPORT/PRE_SCHEMA/PROCACT_SCHEMA
    ORA-39083: Object type PROCACT_SCHEMA failed to create with error:
    ORA-31625: Schema ZABBIX is needed to import this object, but is unaccessible
    ORA-01435: user does not exist
    Failing sql is:
    BEGIN
    sys.dbms_logrep_imp.instantiate_schema(schema_name=>SYS_CONTEXT('USERENV','CURRENT_SCHEMA'), export_db_name=>'XXX.YYY.COM', inst_scn=>'7788478540892');COMMIT; END;
    Processing object type SCHEMA_EXPORT/TABLE/TABLE
    ORA-39083: Object type TABLE:"ZABBIX"."TABLE1" failed to create with error:
    ORA-01918: user 'ZABBIX' does not exist
    Failing sql is:
    CREATE TABLE "ZABBIX"."TABLE1" ("COLUMN1" VARCHAR2(20 BYTE) NOT NULL ENABLE, "COLUMN2" VARCHAR2(20 BYTE), "COLUMN3" VARCHAR2(20 BYTE)) SEGMENT CREATION IMMEDIATE PCTFREE 10 PCTUSED 40 INITRANS 1 MAXTRANS 255 NOCOMPRESS LOGGING STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645 PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT FLASH_CACHE DEFAU
    Processing object type SCHEMA_EXPORT/TABLE/INDEX/INDEX
    Processing object type SCHEMA_EXPORT/TABLE/CONSTRAINT/CONSTRAINT
    Job "SYSTEM"."SYS_IMPORT_FULL_01" completed with 2 error(s) at 14:14:53
    (5)oracle@targetHOST$
Export was done using following command (on a different machine)
(0)oracle@sourceHOST$ expdp zabbix/zabbix schemas=ZABBIX content=METADATA_ONLY directory=TEST_DIR dumpfile=ZABBIX.dmp logfile=expdpZABBIX.log
Complete export log available here.:

I figured it out on my own. Required privilege is 'CREATE USER'. I don't have system's password so I granted CREATE USER to zabbix, made it DBA and it seems to be exporting more than it did last time:
Processing object type SCHEMA_EXPORT/USER
Processing object type SCHEMA_EXPORT/SYSTEM_GRANT
Processing object type SCHEMA_EXPORT/ROLE_GRANT
Processing object type SCHEMA_EXPORT/DEFAULT_ROLE
Yet to import but looks good so far..
Appreciate you taking the time..
Thanks...

Can not create user "OPS$domainname\SAPSERVICEC11" in oracle

Hi all,
I'm installing SAP R3E 4.7 extension set 2 SR1 on Window 2003 , orcle 9.2 (patch 9.2.0.8.0) after finish CI, DB, DI and try to strat SAP with MMC but disp+work.exe didn't run . And the error is "ORA-01017: Invalid username/password; logon denied"
After that i find out solution from SAP Note400241. I need to create user "OPS$domainname\SAPSERVICEC11" but my domain name is 17 charecters long. That make the username is too long (more than 30 characters). So I cann't create this user.
How can i solve this problem?
BR,
Prachya

> Hi Eric,
>
> With the note: 400421 I am facing the following
> problems..... Could you please help me out as where I
> am going wrong?
>
> 1. I could connect through " connect /@sid"
-> OK, then the "OPS$" exists
>
> 2. select granted_role from dba_role_privs where
> grantee='ops$_user';
> No Rows found..
>
> 3. select owner from dba_tables where
> table_name=T000
>
> gives me SAPDEV
>
> That means the owner is SAPDEV and what is SAPUSER
> ????
NO, this is telling you that the schema name is SAPDEV, only. We will need it later
>
> general checks:
>
> select owner from dba_tables where table_name=SAPUSER
>
> gives me OPS$DEVADM and OPS$SANDBOX\DEVADM
The name of your server is SANDBOX, but you mentioned before that you had a domain longer than 17 characters. This does not match.
Have you performed a DOMAIN or a LOCAL installation?
For this output it seems that it is local
>
> so if t000 has SAPDEV then should I check the above
> command for SAPDEV instead of SAPUSER???? ..
NO. The table name is SAPUSER
>
> 3. select owner, table_owner, table_name from
> dba_synonyms wghere synonym_name=SAPUSER
> give
> OPS$SANDBOX\SAPSERVICEDEV OPS$SANDBOX\DEVADM SAPUSER
>
> why here SAPUSER is present..

Do you know what is a synonym? or what have you queried?
Select owner, table_owner, table_name from
dba_synonyms wghere synonym_name=SAPUSER
It is giving you the
-> Synonym OWNER -> OPS$SANDBOX\SAPSERVICEDEV
-> Table OWNER -> OPS$SANDBOX\DEVADM
-> TABLE NAME -> SAPUSER
This data is correct.
>
> Do I need to change the T000 table( update it to
> SAPUSER)???
NOOOOO. Leave teh "normal" tables alone
>
> I you know that have copied the data files (OS level)
> from anpther DEV server to sandbox..( SID same). It
> had in DBA_USER with its hostname like
>
> OPS$HPSERVER\SAPSERVICEDEV
> OPS$HPSERVER\DEVADM
>
> So I thought it must be bcos of this so I run the
> script oradbusr.sql to create
> OPS$SANDBOX\DEVADM user and managed to create it.
> Also managed to get OPS$SANDBOX\SAPSERVICEDEV users.
> The grant to them is also okay.. But then also not
> able to connect through SAP.
>
> Please suggest where I am going wrong and what to
> change...
>
> Regards
> Prashant
So, Looking at the initial error ( ora-1017 ) and the output of the queries I wonder if you have changed the DB password.
I do think so. and I think you did it at DB level ( alter user identified by ... )
Then the problem seems to be that you do not have the password in SAPUSER table in sync with the password you changed.
In SAP ABAP systems you cannot change the password at DB level. You have to use BRCONNECT to do so, it will keep the passwords in SYNC:
brconnect -u system/<password> -f chpass -o <sapowner> -p
<password>
try it. then execute R3TRANS -x and see if it can connect

Can not create user in Times Ten 7

Hi All,
I have installed Oracle Times Ten 7.0.4 in my machine. To connect to the databse I have used "connect RunDataCS_tt70_32;" which I found from the ODBC. (I even dont know whether this the correct way to connect or not). Now I have tried to create a user (" create user prashant identified by 'p1'; ") but the command failed saying "15007: Access control not enabled".
Can anybody tell me how can I create a user in Times Ten.
Thanks,
Prashant

To be able to create users and have access control applied you must install TimesTen with Access Control enabled (it is an optional feature). When you did your install you replied no (or took the default) to the question 'Do you want to enable Access Control?' (or you did not tick the relevant check box if you are using Windows).
You can enable Access Control for your installation by running the command
ttmodinstall -enableAccessControl
you need to do this as the instance administrator user (the O/S user who installed the TimesTen instance).
I would strongly advise that you read through the TimesTen QuickStart Guide and other tutorial on the TimesTen OTN site beofre trying to use TimesTen as it will save you a lot of time and many questions to this forum :-)
Chris

Could not create user in

Hi all,
I have installed SAP EP6.0 SP11 upon NW04 SR1 with WebAs 6.40 (both abap and java engines).I'm not able to create any new user in portal.Why is this so.Can anyone help me in this regard.
Gopi

Hey Gopi,
Please provide some more information:
1. What happen when you try to create a user?
2. Have a look at the defaultTrace see the trace after you try to create a user, do you see anything there?
3. If not, increase the severity level of the following location: com.sap.security (The whole tree)-> To ALL, try to create a user and search the log again for some meaningful information.
Regards,
Roy

Lion Server 10.7.4 will not create users - please help

I am completely stumped.
I bought a Mac Mini Server yesterday and set it up successfully (Set OD, etc). Everything was working great until I went back and tried to create new users via the server app. As of now, it gives me the error "SEUserErrorDomain error1" and tells me that it cannot create the user. Even though it says that, it will still show up in the user list with the "blue globe" (that I believe is from OD?) but disappear the moment I drill into it and try to save anything. Workgroup Manager will allow me to create the user, but it does not show up in the user list in the server app so I cannot enable certain services for the user (i.e. assign folders for share point, etc).
I am new to Mac Server so any help would be appreciated.
P.S. Apple tech support had me reinstall the 10.7.4 combo update - no help. They also had me use disk utility to repair permissions - no help.
P.S.S. On a side note, I did install Samba 3 on the server via mac port to try and help with LDAP auth (I ended up going with pGina for my windows users), but I have no clue how to uninstall it. Not sure if that would create this issue or not (forgive my naivety).
Thank you in advance for any help
Derek

Hey studio.lx
They are all running, and there were no errors. However, after talking with Apple Support a few times, they helped me figure out how to fix it.
Our best guess is that when I pushed through the 10.7.4 combo update, it didn't take completely and corrupted the LDAP server. Thankfully, I had not spent a great deal of time on my users yet, so all we ended up having to do, was destroy the server and rebuild the Open Directory.
To destroy it, I opened terminal and ran this command: sudo slapconfig -destroyldapserver
Took about 10 minutes and it worked beautifully. Apple Tech Support did say, that as long as I had an archive of the Open Directory saved somewhere, I could have destroyed it and restored the information back from there. Not sure how this would have went down if I had already populated my info, but thankfully it was early enough on in the process that it did not set me back too far. Just glad it was resolved.
Thanks everyone for your help.
Derek

Can not create user with useradd

Hi,
the command is (as root):
# /usr/sbin/useradd -c 'Oracle software owner' -d /u01/oracle -g dba -G ocgroup,ocmaint -m -u 1000 -s /usr/bin/ksh oracle
The output is:
UX: /usr/sbin/useradd: ERROR: Inconsistent password files. See pwconv(1M).
ACTIONS TAKEN:
# pwconv : no changes
bash-3.00# wc -l /etc/passwd /etc/shadow
18 /etc/passwd
18 /etc/shadow
36 total
bash-3.00# cat -ve /etc/passwd
root:x:0:0:Super-User:/:/sbin/sh$
daemon:x:1:1::/:$
bin:x:2:2::/usr/bin:$
sys:x:3:3::/:$
adm:x:4:4:Admin:/var/adm:$
lp:x:71:8:Line Printer Admin:/usr/spool/lp:$
uucp:x:5:5:uucp Admin:/usr/lib/uucp:$
nuucp:x:9:9:uucp Admin:/var/spool/uucppublic:/usr/lib/uucp/uucico$
smmsp:x:25:25:SendMail Message Submission Program:/:$
listen:x:37:4:Network Admin:/usr/net/nls:$
gdm:x:50:50:GDM Reserved UID:/:$
webservd:x:80:80:WebServer Reserved UID:/:$
postgres:x:90:90:PostgreSQL Reserved UID:/:/usr/bin/pfksh$
svctag:x:95:12:Service Tag UID:/:$
nobody:x:60001:60001:NFS Anonymous Access User:/:$
noaccess:x:60002:60002:No Access User:/:$
nobody4:x:65534:65534:SunOS 4.x NFS Anonymous Access User:/:$
ocadmin:x:1001:107:ON-Center Administrator Account:/export/home/ocadmin:/bin/ksh$
cat -ve /etc/shadow
root:VipMkPKbgRZFs:14859::::::$
daemon:x:14858::::::$
bin:x:14858::::::$
sys:x:14858::::::$
adm:x:14858::::::$
lp:x:14858::::::$
uucp:x:14858::::::$
nuucp:x:14858::::::$
smmsp:x:14858::::::$
listen:x:14858::::::$
gdm:x:14858::::::$
webservd:x:14858::::::$
postgres:x:14858::::::$
svctag:x:14858::::::$
nobody:x:14858::::::$
noaccess:x:14858::::::$
nobody4:x:14858::::::$
ocadmin:Ru2SfqpBfDlSM:14858::::::$
PLATFORM DESCRIPTION
SunOS argenlab 5.10 Generic_139555-08 sun4v sparc SUNW,SPARC-Enterprise-T2000

I fixed the problem. Somehow the connection and provider properties are defined in machine.config. I did not have anything in my application's web.config. After I moved provider information to my web.config and gave the appliaiton name I was able to create a user account. I do not know at what point the OraAspNetConString properties were added to machine.config.
Thanks

ARD 3.2.2 does not warn user on impending shutdowns

Hi, I am using the latest ARD (I think) and even though I have Attempt Restart, Allow Users to Save Work, it won't on updates that require a reboot. The RAWCameraUpdate is a recent example. Any ideas? thx!!!

forget about it I guess, it's just broke. i have started sending users warnings of impending shutdowns via ARD message facility, at least they are being warned that way...

BW and RFC problem -- Source system not created.

Hi Friends,
Before posting this post , i have searched so many posts and docs and but still got a problem in creation of R3 source sytem in BI7.0.
Steps i followed in R3 are as follws:
1) created alogical system for R3 and BI7.0
2)assigned this logical system to clients 001 and 800
001--Bi
800--r3
3)created user BWALEREMOTE in su01 with profile sap_all
Steps in BI7.0 are as follows:
1) Created logical systems for Bi and r3
2) assigned this logical systems to same clients
3) created user BWAleremote in su01 with profile SAp_ALL
with respect to RFC's
In R/3
SM59--created a RFC name same as logical system names
for R3 RFC destination-- user is BWaleremote, client is 800
for BI RFC destination -- user is Bwaleremote , client is 001
when i checked the connections , i can sucessfully test the connections , But remote logins are having problems.
r3 to BW is possible, but it is prompting the password for BI again
BW to R3 is not possible.
To my knowledge and search in forums,RFC connections are succesful, then it should not prompt for any passwords..so iam wrong
I also went into RSA!-- global settings-- i gave user as BWaleremote..
Plz help me in this
PAVAN

Hi Pavan,
The RFC configuration is probably wrong. Check the username/pswd that you are using to connect to the other system. Try logging normally through the sap logon pad using that username/pswd that you have mentioned in the logon tab in RFC connection entry. See if you are able to logon. In the remote logon, it should not ask for any password.
If this succeeds, then create the source system in RSA1 in the BI box.

Re-provisioning to RTC for re-created users

Seems that there's a problem with RTC provisioning when re-creating a user with the same name in OID. The only workaround I've found so far is to restart the RTC component with opmnctl. Doing this, there was another problem - restart fails:
[oracle@pluto ~]$ /home/oracle/product/10.1.2/ocs_1/apps/opmn/bin/opmnctl restartproc ias-component=RTC
opmnctl: restarting opmn managed processes...
================================================================================
opmn id=pluto.krnap.cz:6201
0 of 1 processes restarted.
ias-instance id=ocsapps.pluto.krnap.cz
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
ias-component/process-type/process-set:
RTC/rtcpm/rtcpm
Error
--> Process (pid=17350)
process crashed during restart
Log:
/home/oracle/product/10.1.2/ocs_1/apps/opmn/logs/RTC~rtcpm~1
I have to use this sequence to sucessfully restart RTC:
[oracle@pluto ~]$ /home/oracle/product/10.1.2/ocs_1/apps/opmn/bin/opmnctl stopproc ias-component=RTC
opmnctl: stopping opmn managed processes...
[oracle@pluto ~]$ /home/oracle/product/10.1.2/ocs_1/apps/opmn/bin/opmnctl startproc ias-component=RTC
opmnctl: starting opmn managed processes...
Anybody dealing with this or similar issues?
Thanks a lot.
Zdenek

Hello there,
This is what I took as remedy steps:
Created a new versin of the OID form. Checked the prepop adapters are attached properly or not - everything looks good there.
Then I tried doing direct provisioning the OID resource to a user unchecking the auto save on the process defn. Saw and checked the process form values. All the values are prepop'ed perfectly. As soon as you click the last 'Continue' button - the user gets provisioned. If you click 'OID User', it'll only show 2 tasks 'System Validation' and 'Create User' as 'Completed'.
Activated the Access policy on OID User.
Now again tried to create a single user.So now if you click 'OID User', it'll show 2 tasks 'System Validation' as 'Completed' and 'Create User'
as 'Rejected' with the response as 'User Creation Failed' and description as 'Could not create user'.
The logs still show the same error.
I don't know what's exactly wrong with this 'Auto-Save' option? or may be it has to do with the Access policy process form - any info needs to be provided at the time of creating the access policy when we click 'Next' on OID process form?
Thanks,
- oidm.

Facebook login does not add user and password to the account

Hi
PROBLEM
Facebook login button does not create user and password for login.
We wish we could ONLY use facebook login button to allow users the account creation on our campus.
So we disabled the user creation webform.
And only out facebook login buttons that students can only login to our campus using their fb account in the hope that they dont share it (hopefuly)
AND
This is a problem BECAUSE if I publish events and capture leads ALL those users have problems creating their user account latter.
CASE IS
1.- A person comes to my website and leaves a comment. This creates a register with their email and name.
2.- Days later this same user comes back and clicks a facebook user login/ account creatio.
2.1 The page now shows that user name as it comes from Facebook. BUT NO USER AND PASSWORD information added to that person's register in the CRM.
So
If some one leaves a comment, register to our mailing list FIRST
and SECOND tries to create his account afterward. IT DOESNT WORK
Any ideas?
Thank you so much in advance.
P.S.
This is the web page. If you 1) Leave first a comment and 2) click on fb login/create account button the profile renders unusable. I have to delete it so you can create your user
http://www.zuiliuniversity.com/nivel-2-curso-especializado-proyecto-de-marketing-digital

if you are only using 2 snmp commands to let the switch pull the config from your tftp server, than there are some commands missing ...
have a look here to get a documentation about this process:
https://supportforums.cisco.com/docs/DOC-1860
http://www.cisco.com/en/US/tech/tk648/tk362/technologies_configuration_example09186a0080094aa6.shtml

GRC: User not created in backend (CUA client)

Hello expert,
We have GRC 10, SP13.
I have configured the connectors and setting for my CUA client.
I also configured my CUA client in SPRO.
I am able to select my CUA client in ARQ. When submitting, the request is approved.
Audit Log is showing:
Application log is showing:
But there is no user provisioned in my CUA client, not any IDOC or log in showing in my CUA master.
Did I missed something? Any advise is appriciated.
Regards Nguyen

Hi Ameet, thanks for your info.
1) Maintain CUA Settings. Did you maintain CUA system/client as the target client. --> Sorry, I am not sure what you mean? I have configured CUA for my backend and I can create a user via my CUA master, the CUA client is provisioned by sended IDOC from the master. Now I would like GRC provisioning the user to the CUA client instead of the CUA master.
2) Can you see all the child connectors under Maintian CUA settings. Check the tables: GRACCUADIST and GRACCUAMSTR --> yes, my configured CUA client is listed in table GRACCUADIST, table GRACCUAMSTR is empty as I don't want my GRC to use CUA as a global tool.
3) Have you installed CUA plug-ins in CUA system. --> My CUA client and master have the GRC Plugin.
4) Check for the FM: /GRCPI/GRIA_ASSIGN_OBJECT_NH --> FM exist in CUA client/ master and GRC. What is this FM good for?
Thanks for advise, regards Nguyen

Remote Desktop repeatedly installs ARD Client for standard users...

ARD 3.2 running on OS 10.5.4 on MacBook Core2Duos...
These are machines imaged from an asr disk image...
No issues with admin users...
Every time Remote Desktop is launched by a standard user, a admin user name / password is required and the Apple Remote Desktop Clint is reinstalled. After, ARD runs normally until it is quit and relaunched, even without a user logout...
Making the standard user an admin user resolves the issue. The issue returns when the admin right are removed from the user...
Have run permission repairs, removed and reinstalled Remote Desktop, manually checked permissions, etc...
It appears that from the standard user perspective, the ARD Client software needs to be updated. ...
Any ideas out there? I have to deploy these machines NOW and I am running out of ideas on this...
Thank you! Les

Dave,
Thank you for the ideas. While you are pretty much correct in what you have said, these are unfortunately not my issue(s). I wish they were!
1) ARD will run fine for a standard user (at least it did in Tiger) as long as it is properly setup and licensed by an admin user ahead of time (especially the entry of the license code). This I have done, and the license code is recognized just fine. I too thought of the promote / demote idea and have tried it. While promoted, it launches fine for the user, but upon demotion goes back to reinstalling the ARD Agent at each launch of the program (this install process does not run while the user is promoted)...
2) The systems are from the same disk image. However, I have given system its own unique, valid, legally purchased serial number. Though the program is loaded on the image, it has been installed only. It is not run or licensed on the master, only on the end-user client machines...
It appears to me that from the standard user perspective, the system thinks that the ARD Agent needs to be updated. I have verified with the PackageMaker SnapShot utility that the ARD Agent and its related files are being installed when this happens, and they appear to be the only thing being installed. The Remote Desktop Admin program itself seems to be fine.
Does anybody know exactly what happens at the file system lever when Remote Desktop is launched? I am thinking my standard user is lacking access to a particular file or directory or right, and I am sure I could quickly find it if I new what to trace. Watching fs_usage has yielded lots of information, but nothing that has helped...
I have also removed and reinstalled Remote Desktop to no avail. Disabled all ACLs on the file system, placed known-good receipts and run permission repairs, and forced chmod -R 777 down the path of everything I can find with the names Remote Desktop, ARD, etc...
I am a little worried at this point that the issue is created by the imaging process something like the question marks in docks in the latter updates of 10.4. I have seen similar issues come up (launching apps under Rosetta being one) with users' LaunchServices property lists after moving their home directories from one volume to another, making the issue very hard to track down, as they reside in files that do not contain the name of the app being affected...
Any further ideas would be much appreciated!
Les

ARD 3.5.1 Client not creating users

Similar Messages

Maybe you are looking for