Are all files backed up or are some skipped?
hi i accidently deleted my web browser (chromium) history. i recovered all the application support files from time machine, but the history was still gone. i didn't tell the timemachine prefs to exclude anything. what gives? thanks.
They are probably somewhere in your user library, although I don't know exactly where since I don't use that browser.
Hold down the option key while using the Finder “Go To Folder” command. Enter ~/Library/.
If you prefer to make your user library permanently visible, use the Terminal command found below.
http://osxdaily.com/2011/07/04/show-library-directory-in-mac-os-x-lion/
You might want to bookmark the command. I had to use it again after I installed 10.8.4. I have also been informed that if you drag the user library to Finder it will remain visible.
Similar Messages
-
i am upgrading my 2008 macbook to an ssd drive and want to save my settings. how do i save then? I have my files backed up with time machine ,but dont want to restore all files ,as there might be some junk backed up too. Help will be appretiated
When you restore from a Time Machine back up you can pick and chose what is restored. It is not an all or nothing process. Nor do you have to do the partial restores all at the same time. If days after the first partial restore you find something else you want you can restore just that.
-
Moving all files back to Google Drive due to lack of response
Due to the utter lack of response to my syncing issues with Creative Cloud Desktop, I am now forced to move all of my files back to a more reliable solution (Google Drive). I have given your company every opportunity to respond to this issue before I posted this message, but the complete dismay of this known syncing issue has left me no other choice.
As a long term client of Adobe and Macromedia for over 15 years, I cannot believe that you have chosen not to respond to this issue. I felt brushed off from your live chat department, considering I spent over two hours trying to resolve the issue with them and they just kept passing me to different departments. To make matters worse, the last individual I spoke to advised that the issue would be escalated because it is a known issue and there was no resolution. I then received an email stating that my issue was resolved and therefore the case was closed. This was completely untrue. I cannot still sync files from my desktop to the cloud. It appears the live chat operator just didn't want to have an open case (which would look bad for him), so he closed the case after we ended the chat. I still receive several error messages that I have repeated to your team multiple times.
I then re-opened the case and filled out a survey expecting a response. No response at all! I have now posted three messages in this message board and no response at all.
I am sorry that I have to post this message, but I have given your company every opportunity to respond, but nothing.
With that said, I now will be moved my team's files back to Google Drive.Gcoiro, I am also very disappointed with the live chat service. I spent over 2 hours trying to communicate with a live chat rep, and it became evident that the rep wasn't even reading my responses and questions during the conversation. Rather than try to make robots seem more human... let's try and make our humans seem less robotic, Adobe.
-
Importing data file back into blank PDF - some data fields don't populate
I have created a writable PDF in Adobe LiveCycle 8. Once the form is completed the person filling out the form submits by email. The email is successfully received and the data file is complete (opening it in a browser verifies this). However, when I use try to import the data back into the PDF file (by opening Adobe Pro | blank form | managage form data | import data - only some of the fields are populated. I need this data to repopulate the form so I can print it and I also need to export it to Excel for other purposes. What am I doing wrong?
Check the binding on the fields that don't populate and see that it is set to something other than None.
-
When browsing documente library contents from client application, cannot see all files
We are currently running SharePoint 2010 Enterprise in a small environment. On one of my sites, I have a document library with various documents uploaded (docx, xlsx, pdf). I am unable to see all the documents when browsing the library from Word/Excel/Adobe
Acrobat. For example:
- At the root level of the library, I have 5 folders
- In Folder 1, I have 10 PDF files
- If I go into Adobe Acrobat 11, for example, and paste the address of my site in, I can see the library and I can click on it and see the 5 folders. If I click on Folder 1, there are no PDFs listed. Even changing File Type to "All Files"
still returns 0 results
Things I have tested:
If I view the library in the browser, I can see the 10 PDFs in Folder 1. They are not checked out and they are visible to everyone
If I click Library>Open w/ Explorer, I can see all 10 PDFs in Folder 1
If I try using other client applications (Word, Excel, etc..), I cannot see any files in Folder 1, even when I change the File Type to "All Files"
If I click in some of the other Folders in the same library from within a client application, sometimes I can see the files but most times I cannot
What could be causing this? I do not see any errors in any of the event logs.Hi Sephiroth,
I think my observation is when you browse from word/Excel/Adobe it is taking your local system credentials and so not showing files when you access.
local system account means the account which you used to login to the system.
For example,you logged into the system as contosomo\xyz and you are trying to connect to the site using Contosomo\setup account,what my point is though you logged in to the site using the setup account site is taking your xyz account credentials and so it
not showing any files as xyz obviously will not have access.
To confirm this, you can try by giving atleast read access to the local system account (in this case xyz) to the library and then test again whether you are able to see the files or not.
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem.
s p kumar -
I've re-installed to try putting all files back in place/overwrite the lingering file hoping that with another uninstall it would take all the files including whatever causes the error. In App Data Local/Roaming I've deleted the folders AMozilla after a restart of the computer because it says files in use when trying to delete any time other than while system is still loading at start up.
Most of the time it's just an error saying Firefox isn't working properly and it replicates itself over time. I have the choice of minimizing and then waiting as each one takes over the taskbar or close each one as they pop up. Every so often it pops up the wizard from first start up after install asking to import favorites from IE/Chrome.Did you also delete....
#C:\Program Files\Mozilla Firefox
OR
#C:\Program Files (x86)\Mozilla Firefox
? -
HELP. ............Hi folks hope some one can help me please.Having a problem in Bridge I open my images in ACR, as I open files in a folder and lets say they are labeled in yellow they are all going back to the camera raw default , in other words no matter what work I have done, inc cropping they all go back to ,as they came out of camera. What on earth is happening? I am on PS CS6. I might point out everything was working normally up to yesterday, when this first started.
I recently changed computer to 64bit from 32bit, not sure if this causing the problem or not. Any help would be appreciated.Robert,
Would you be so kind to rephrase your question with concise, precise information and without any "let's say that" hypotheticals? Sorry, I can't quite follow you.
Also please give exact versions of Photoshop CS6 (13.what.what), of Bridge and of your OS.
Thanks.
BOILERPLATE TEXT:
If you give complete and detailed information about your setup and the issue at hand, such as your platform (Mac or Win), exact versions of your OS, of Photoshop and of Bridge, machine specs, what troubleshooting steps you have taken so far, what error message(s) you receive, if having issues opening raw files also the exact camera make and model that generated them, etc., someone may be able to help you.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks! -
My Time machine has stopped backing up saying there are some read only files.
My Time machine has stopped backing up and says that ther are some read only files preventing this. What steps do I need to take to fix it?
If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left.
Enter the word "Starting" (without the quotes) in the String Matching text field. You should now see log messages with the words "Starting * backup," where * represents any of the words "automatic," "manual," or "standard." Note the timestamp of the last such message. Clear the text field and scroll back in the log to that time. Post the messages timestamped from then until the end of the backup, or the end of the log if that's not clear.
Post the log text, please, not a screenshot. If there are runs of repeated messages, post only one example of each. Don't post many repetitions of the same message.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into a message.
Some personal information, such as the names of your files, may be included — edit that out, too, but don’t remove the context. -
When I try to back up my Mac Book Pro to an external hard drive some of the files are backed up but not all files are backed up. I don't understand. Can anyone help please?
I've used time machine in the past and couldn't get to the bottom of the problem so I've recently downloaded and am using carbon copy cloner and I get the same problem. The files that are missing are just word and number documents. Seems so odd.
Thanks for replying
John -
Help!! working on a movie on Imovie. I had to delete a music file from a clip section and now there are some clips that have no audio!!! don't know how to get the audio back to my clips!!!! Help!!!
You can use some third party software to copy the music from your old iPod back to computer first, and then import the music into iTunes and re-sync them to yournew iPod. Here is a guide about how to transfer iPod music to computer. Hope it helps. Feel free to email me if you need further help.
-
Ok i have indesign CS6 and all files are stored on a 10.7.5 MAC server. This just started happening. When I open a file indesigns is creating a textfile in the same folder? I need some help on this.
Ask in the ID forum and be much more specific about your configuration. there could be any number of reasons why manifests, temp files or restore files are created.
Mylenium -
2 problems: All files are locked - how to globally unlock on the backup drive? I am backing up large video files 500GB on a 2 TB machine. Time Machine repeatedly copies everything using up all of disk space. I only need 1 copy not, twenty. What to do?
2 problems: All files are locked - how to globally unlock on the backup drive? I am backing up large video files 500GB on a 2 TB machine. Time Machine repeatedly copies everything using up all of disk space. I only need 1 copy not, twenty. What to do?
-
After installing Adobe Reader all my files are switched to Adobe files. After uninstalling Adobe Reader all is back to normal. Can you help? Thanks.
You may find this useful: http://helpx.adobe.com/acrobat/kb/application-file-icons-change-acrobat.html
-
hi all.When pressed play and make some changes in loop (eg fade in fade out) are very slow to implement, and also the loops from the library are very slow to play, corrects the somewhat self so is the Logic??
Hey there Logic Pro21,
It sounds like you are seeing some odd performance issues with Logic Pro X. I recommend these troubleshooting steps specifically from the following article to help troubleshoot what is happening:
Logic Pro X: Troubleshooting basics
http://support.apple.com/kb/HT5859
Verify that your computer meets the system requirements for Logic Pro X
See Logic Pro X Technical Specifications.
Test using the computer's built-in audio hardware
If you use external audio hardware, try setting Logic Pro X to use the built-in audio hardware on your computer. Choose Logic Pro X > Preferences > Audio from the main menu and click the Devices tab. Choose the built in audio hardware from the Input Device and Output Device pop-up menus. If the issue is resolved using built-in audio, refer to the manufacturer of your audio interface.
Start Logic with a different project template
Sometimes project files can become damaged, causing unexpected behavior in Logic. If you use a template, damage to the template can cause unexpected results with any project subsequently created from it. To create a completely fresh project choose File > New from Template and select Empty Project in the template selector window. Test to see if the issue is resolved in the new project.
Sometimes, issues with the data in a project can be repaired. Open an affected project and open the Project Information window with the Project Information key command. Click Reorganize Memory to attempt to repair the project. When you reorganize memory, the current project is checked for any signs of damage, structural problems, and unused blocks. If any unused blocks are found, you will be able to remove these, and repair the project. Project memory is also reorganized automatically after saving or opening a project.
Delete the user preferences
You can resolve many issues by restoring Logic Pro X back to its original settings. This will not impact your media files. To reset your Logic Pro X user preference settings to their original state, do the following:
In the Finder, choose Go to Folder from the Go menu.
Type ~/Library/Preferences in the "Go to the folder" field.
Press the Go button.
Remove the com.apple.logic10.plist file from the Preferences folder. Note that if you have programmed any custom key commands, this will reset them to the defaults. You may wish to export your custom key command as a preset before performing this step. See the Logic Pro X User Manual for details on how to do this. If you are having trouble with a control surface in Logic Pro X, then you may also wish to delete the com.apple.logic.pro.cs file from the preferences folder.
If you have upgraded from an earlier version of Logic Pro, you should also remove~/Library/Preferences/Logic/com.apple.logic.pro.
Restart the computer.
Isolate an issue by using another user account
For more information see Isolating an issue by using another user account.
Reinstall Logic Pro X
Another approach you might consider is reinstalling Logic Pro X. To do this effectively, you need to remove the application, then reinstall Logic Pro X. You don't have to remove everything that was installed with Logic Pro X. Follow the steps below to completely reinstall a fresh copy of Logic Pro X.
In the Finder, choose Applications from the Go menu.
Locate the Logic Pro X application and drag it to the trash.
Open the Mac App Store
Click the Purchases button in the Mac App Store toolbar.
Sign in to the Mac App Store using the Apple ID you first used to purchase Logic Pro X.
Look for Logic Pro X in the list of purchased applications in the App Store. If you don't see Logic Pro X in the list, make sure it's not hidden. See Mac App Store: Hiding and unhiding purchases for more information.
Click Install to download and install Logic Pro X.
Thank you for using Apple Support Communities.
Cheers,
Sterling -
Disc Burner. Why are some files not readable or writeable?
Hello,
I am trying to backup my friends computer files on a beige G3 (233 MHz). I am burning about 6 DVDs of AIF music files. Most of the files are about 30 - 40 Megs in size. Often I receive error messages on particular files that read:
"The operation cannot be completed because some data cannot be read or written.
(Error code - 36)"
Followed by the choices: "Stop" or "Continue".
I have a bad feeling that my startup disk is too small but I am not sure.
Most of the files work fine. However some of the files cause disc burner to not be able to use them in the disc image before I burn. Why would this be?
Here are the specifications:
Computer: beige G3 with two hard drives (one SCSI and one ATA hard drive) and a Pioneer DVR-110D DVD writer which is Apple supported (Apple system profiler indicates Apple supported on this DVD writer). My blank DVD disks are Sony Vermatim DVD-R (1 - 16x speed support). Although I think my beige G3 only writes them at about 2 or 4x.
I am using OS 10.1.5. My startup disk which has OS 10.1.5 in it is a 4 GIG SCSI disk. Is this big enough for a startup disk (for creating 4.5 GIG DVDs)? My files are on the second hard drive which is a 40 GIG ATA disk.
I have a bad feeling that my OSX startup drive is too small for disk burning - it is only 4 GIGs in total and OSX Disc burner (Disc copy) is first making a disk image on my startup volume before it burns it. Perhaps that disk image is too large for the startup volume. Is there any way I could ask OSX to put this disk image on the second larger hard drive instead (not the startup drive?).
Here is my process (I hope I am doing this right - I am new at this):
1. I first insert a blank DVD-R
2. A message pops up asking my if I would like to create a blank disc image for this disk (I think this is the typical Disk Copy utility window. I say "yes" and give it a name and choose the "DVD-R or DVD-RAM" option. (I am not sure if there are other important settings to choose here or better settings to use but I guessed the other options that seemed obvious. A blank disk image is created with an icon that looks like a DVD disk.
3. Then I drag my chosen files to this blank disc image. It takes about 30 minutes to copy over. Thats when I receive the error message that some files couldn't be "read or written". The other files work fine but it would be nice if they all worked.
Why would some files not be readable or writeable?
4. Then I choose file/burn in the top menu and the DVD is created. This takes another 20 - 30 minutes. At the very end of the process another message pops up saying:
"Sorry the operation could not be completed because an unexpected error occured (error code -28)" Followed by an "OK" button.
However all the files that made it onto the final DVD are fine - its just that its not all of the ones I originally chose in the first step when dragging to create the disk image.
Am I doing this the right way?
Why are some files not "readable or writeable" as it indicates in the error message?
Is my 4 GIG startup disk too small for this? or are the music files possibly corrupt? or could there be some other possible problem?
ThanksTo follow up, I have some good news. After following your advice Kappy, it now works very well Thanks! Instead of using the 4 GIG volume for the OS, I am now using an 8 GIG partition on an 80 GIG drive. So now the OS has some room to operate. No disk errors occured on my first DVD
Now there was one problem. The second DVD burned gave me an error. I am not sure why but I am going to guess that because I had to installed the OS onto an 8 GIG partition maybe the OS needs to be rebooted in between disk burns because although 8 GIGs is certainly greater than the 4 GIGs I gave it last time, it still isn't a lot of space - maybe just enough to do one DVD at a time. Thats only a guess. So I rebooted to see if that clears the system out ready for the next DVD and I am trying to burn the second DVD again. If I remember I will report back. In any case, yes, this seems to be working. I hope this second DVD burns well too.
Thanks Kappy
Maybe you are looking for
-
How to add an attachment to a google calendar event when uisng safari
how to add an attachment to a google calendar event when uisng safari?
-
ICloud: I can't set a check mark at calendar, contacts and mail. Why?
iCloud: I can't set a check mark at calendar, contacts and mail. Why?
-
Is there a Button menu option that will allow one view the names of all the buttons already created?
Is there a Button menu option in InDesign CS 5.5 that will allow one view the names of all the buttons already created?
-
Hello, AP 1600 has PHY data rates up to 300 Mbps, and 2600 up to 450 Mbps. With 1600 AP, if I have a client connected at 300 Mbps on the radio 5 GHz (MCS index 15, 40 Mhz) and another client connected at 130 Mbps on the radio 2.4 GHz at 130 Mbps (MCS
-
hi, i am working on a scenario where i need to use BAPI_ACC_DOCUMENT_POST to post accounting documents. process has to be created where 2 text files are read 1. Header lines(s) 2. Line Items(s). In the process i need to send the data to the BAPI with