Are Easy Setups with Custom Capture and Sequence Presets Portable?

Hi,
I created some Custom Capture and Sequence Presets. Then I created some Easy Setups that use these presets.
Can I copy the Easy Setups to another machine or do I need to create or copy the Custom Presets in order for the Easy Setups to work?
If I need to copy or create the Custom Presets how can I copy them (which files do they live in)?
Thanks!
Mitch

Jerry Hofmann wrote:
These files are located in HD/Library/Application Support/Final Cut Pro System Support/Settings... so just drag the custom setups from there to a flash drive or CD and then place them in the other system's folder in the same path.
Jerry
Hi Jerry,
Thanks for the reply. The Easy Setups are in the directory you mentioned but the Custom Presets are not.
My question is are the custom presets used by the Easy Setup contained inside the Easy Setups? If not are there files I can copy or do I need to manually create them on the second Mac?
Since the other Mac is 50 miles away I have no easy way to test this. If there are files I can bring rather than redoing the custom presets that would be quite a bit easier.
Thanks Again!
Mitch

Similar Messages

Problem with Video Capture, and question towards solution

Yesterday I worked on a commercial for which we captured 9 clips (roughly 10 seconds or shorter in length). The clips all had text/titles superimposed on them by an outside machine and looked good in the monitors when they were exported and captured into FCP (ie: none of the text was chopped off).
I edited the commercial and then was exporting it out, only to discover that the text on the bottom of the clips was getting chopped off.
My first question is this: is there some setting in the capture process that could have done this? something that might have gotten tweaked accidently, or corrupted in some manner? Didn't have this problem with footage captured the previous day. And since it looked good before it was put into FCP, thinking it had to be a problem with FCP.
Also, in trying to tweak the footage in FCP, I came across a 'there must be an easier way to do it' question. Is there a way to alter parameters on multiple clips (such as raising them, like I had to)? I tried selecting all and double clicking, hoping that the changes I made would affect them all, but it only affected the one I directly clicked. I'm sure there's something simple (and obvious) that I'm overlooking...
thanks!

For how and why this could have happened, would you mind sharing your capture and sequence settings?
As far as applying parameters to multiple clips, I think you can make use of the Paste Attributes function in FCP...
Alter one of your problematic clips
Select that clip in the Timeline, then press Command-C (or control-click and choose Copy from the contextual menu)
Select the remainder of your problematic clips
With your clips selected press Option-V (or control-click on one of them and select Paste Attributes from the contextual menu) to bring up the Paste Attributes dialog
Select Basic Motion - under the Video options, on your left-hand side - then click OK
(Basic Motion because, if I understand your solution correctly, you altered the Center property - either in the Motion tab of the Viewer or manually in the Canvas - of your clips. You nudged them all up a bit, right? If you did, then that would fall under the Basic Motion attribute.)
All your selected clips should be nudged up appropriately.
But, again, I'm making a bit of leap since I'm not entirely sure what caused your issue in the first place.

How to print jTable with custom header and footer....

Hello all,
I'm trying to print a jTable with custom header and footer.But
jTable1.print(PrintMode,headerFormat,footerFormat,showPrintDialog,attr,interactive)
does not allow multi line header and footer. I read in a chat that we can make custom header and footer and wrap the printable with that of the jTable. How can we do that..
Here's the instruction on the chat...
Shannon Hickey: While the default Header and Footer support in the JTable printing won't do exactly what you're looking for, there is a straight-forward approach. You can turn off the default header/footer and then wrap JTable's printable inside another Printable. This wrapper printable would then render your custom data, and then adjust the size given to the wrapped printable
But how can i wrap the jTable's Printable with the custom header and footer.
Thanks in advance,

I also once hoped for an easy way to modify a table's header and footer, but found no way.
Yet it is possible.

Hi there i have ipod touch 2nd gen and i am tryna restore it but i get error 21 with orginal fireware and 1601 with custom fireware and when it connected to itunes and i try to boot it up by restoring it white screen with lines thorugh it

hi there i ahve ipod touch 2nd gen and i am tryna restore it but get error 21 with orginal fireware and 1601 with custom firewarw and when connected it to itunes and i try to boot it by resotring it white screen with lines through it

Those errors are covered here:
http://support.apple.com/kb/TS3694

Advanced Button creator with custom gradient and corners

Advanced Button creator with custom gradient and corners, check it here -
http://talkxe.com/?p=56

Advanced Button creator with custom gradient and corners, check it here -
http://talkxe.com/?p=56

Problems with tethered capture and the 4.2 update

I'm having problems with tethered capture and my canon 1ds mark III since I updated to 4.2. Is anybody else having issues with tethered capture that was working fine before the update?

http://forums.adobe.com/community/search.jspa?peopleEnabled=true&userID=&spotlight=false&c ontainerType=14&container=3316&rankBy=date&q=4.2+tethering

HT1296 I'm having difficulty syncing my iCal between my home computer and iPhone. New entries from my home are not syncing with the phone and vice-versa. I didn't have any problems with this before until the latest phone update. Any suggestions?

I'm having difficulty syncing my iCal between my home computer and iPhone. New entries from my home are not syncing with the phone and vice-versa. I didn't have any problems with this before until the latest phone update. Any suggestions?

It could be that the existing wire in your appartment is not clean enough to provision DSL only. When combined with the phone possibly it has a higher line voltage and worked before. Now that the line is to be provisioned without phone service it may be giving them trouble that did not show before they came out and ran the new line test. So a new jack dedecated for your DSL line may require a new wire be run to your appartment. Also the account for internet only used to require direct billing to a credit card or something else. This was a number of years ago. Most accounts are linked to a phone number, and without a voice number it adds to the confusion.
If you are getting the voice and everything turned on as before, then I am at a loss for words.

I want to get my parents setup with an imac and iPad. They are elderly and we live in different countries. I want to know what solution exists so I can be the remote administrator to maintain and keep them up and running .. I dont want anything fancy.

I would like to setup my eldery parents with an imac and ipad which I know will greatly help them in their daily life. The technology they love to play with whenever I visit, but they can never keep anything running or sync'ed unless I am around. Medical and other issues make this a real challenge for them. Unfortunately, I live in a different country and see them maybe once per year. I'm surrounded my apple products but never tried remote administration and wondered what I would need (software and hardware) to make this noble venture sucessful. Anyone out there has some experience or recommendations? I'm looking for something that is simple and reliable to implement ...

JokerGirl,
This is Scott J, I work for Intel and wanted to try and help you out. Sorry to hear about your current PC and your knee!
I agree with the bigger screen. I have the Samsung ATIV Smart PC with a screen 11.6" which is great to watch shows/movies! anything bigger is almost too big for a tablet (personal opinion).
Yes, most if not all tablets will have speakers and a headphone jack
You can watch YouTube
Only certain models have keyboards, you will want to specify this when making a purchase. Note: most keyboards are sold separately.
Covers are usually pretty easy to come buy, as well as screen protectors (clear plastic that covers and protects your screen from scratches, etc.)
Depending on the Operating System (Windows, Android, etc.) you will have access to an app store where you can buy and download content. Alternatively you can access your favorite sites to read news, get books, magazines, etc.
Hooking things to your tablet - different tablets will have different ports (USB, HDMI, etc.) Question to ask prior to making a purchase as some do not have ports (iPad). Back to my Samsung, I have several ports and do hook it to my TV
Tablets can run anywhere from $150-$1,000. The mid-range $400-$700 should fulfill all of your needs above and more!
Here's an article that might help you narrow down your search: http://electronics.howstuffworks.com/gadgets/high-tech-gadgets/5-tips-for-choosing-the-right-tablet....
Happy Holidays!
Scott
#IntelTablets

Working with Pixel Dimensions and HDV Presets in Easy Setup

hi there, i’ve got another question...
i am still learning the in and out’s of hdv capture. I wanted to verify that the easy setup HDV 1080i plugin is what I want to use for import for my HDV footage which was shot with a Sony A1U HDV camera. I believe it was recorded at 1920x1080 and the imported quicktime file says it is imported at 1440 x1080(and in parentheses it says 1888x1062)..why does the HDV 1080i FCP preset not import at the same frame rate as it was recorded at….?
also does a Sony FX1 use the same HDV preset at the A1U?
many thanks
adam

Tom,
You’re right, …again!
Up till now, I really thought that I had true HD coming out of this camera; shame on me! It really does look good.
I’ve browsed the specs of my Canon HV30 User’s manual, and no where does video say 1920x1080; only 1080i ! That’s why when I ingest and capture using ProRes 422HQ, I only see the 1440x1080 Browser frame size.
(Still images from this camera do produce a 1920x1080 and 2048x1536 sizes)
Let me ask your opinion and that of anyone else out there.
If I were to use video from this camera, and move up to an external BluRay burner and player, ……would I achieve better looking DVD video quality than what I’m currently seeing when burning DVD’s using iDVD-Best Performance and playing back on a standard def (upscaling) DVD player ?
And if not, which consumer camcorder would you recommend that DOES provide true 1920x1080 for capturing into FCP, and costs under $1000 !
Thanks
BoBo

Branch office setup with L3 switch and router with IOS security

Hello,
I am in the process of putting together a small branch office network and I am in need of some design advise. The network will support about 10-15 workstations/phones, 3-4 printers, and 4-5 servers. In addition we will eventually have up to 25-30 remote users connecting to the servers via remote access VPN, and there will also be 2-3 site-to-site IPSec tunnels to reach other branches.
I have a 2911 (security bundle) router and 3560 IP Base L3 switch to work with. I have attached a basic diagram of my topology. My initial design plan for the network was to setup separate VLANs for workstation, phone, printer, and server traffic. The 3560 would then be setup with SVIs to perform routing between VLANs. The port between the router and switch would be setup as a routed port, and static routes would be applied on the switch and router as necessary. The thought behind this was that I'd be utilizing the switch backplane for VLAN routing instead instead of doing router-on-a-stick.
Since there is no firewall between the switch and router my plan was to setup IOS firewalling on the router. From what I am reading ZBF is my best option for this. What I was hoping for was a way to set custom policies for each VLAN, but it seems that zones are applied per interface. Since the interface between the router and switch is a routed interface, not a trunk/subinterface(s), it doesn't seem like there would be a way for me to use ZBF to control traffic on different VLANs. From what I am gathering I would have to group all of my internal network into one zone, or I would have to scrap L3 switching all together and do router-on-a-stick if I want to be able to set separate policies for each VLAN. Am I correct in my thinking here?
I guess what I am getting at is that I really don't want to do router-on-a-stick if I have a nice switch backplane to do all of the internal routing. At the same time I obviously need some kind of firewalling done on the router, and since different VLANs have different security requirements the firewalling needs to be fairly granular.
If I am indeed correct in the above thinking what would be the best solution for my scenario? That is, how can I setup this network so that I am utilizing the switch to do L3 routing while also leveraging the firewall capabilities of IOS security?
Any input would be appreciated.
Thanks,
Austin

Thanks for the input.
1. I agree, since I have only three to four printers, they need not be in a separate VLAN. I simply was compartmentalizing VLANs by function when I initially came up with the design.
2. Here's a little more info on the phone situation. The phones are VoIP. The IP PBX is on premise, but they are currently on a completely separate ISP/network. The goal in the future is to converge the data and voice networks and setup PBR/route maps to route voice traffic out the voice ISP and data traffic out the other ISP. This leads up to #3.
3. The reason a router was purchased over a firewall was that ASA's cannot handle routing and dual ISPs very well. PBR is not supported at all on an ASA, and dual ISPs can only be setup in an active/standby state. Also, an ASA Sec+ does not have near the VPN capabilities that the 2911 security does. The ASA Sec+ would support only 25 concurrent IPSec connections while the 2911 security is capable of doing an upwards of 200 IPSec connections.
Your point about moving the SVI's to a firewall to perform filtering between VLANs makes sense, however, wouldn't this be the same thing as creating subinterfaces on a router? In both cases you are moving routing from the switch backplane to the firewall/routing device, which is what I am trying to avoid.

Successful DSL Setup With Westell 6100G and Linksys WRT54G Router

After a week of searching I finally figured out how to get DSL setup with my Linksys router.
All I could get out of the Westell > Linksys router configuration was DSL downloads limited to less than 0.2 Mbps.   No matter what I did on the router settings that was it.    I had a second eHome router that easily configured and achieved the 1.0 Mbps download speeds so that confirmed Verizon and the Westell modem were not the issue.
So what's wrong with the Linksys router configuration?    I had the Linksys WRT54G router Version 5.   Checking the firmware it was the original release of 1.0.0.   (See your routers instructions which can be downloaded from Linksys for how to check your firmware).   I downloaded the latest firmware version for this router model and version number.    Following the Linksys instructions I flashed the latest firmware 1.02.8.   Now I had an updated modem ready to be configured for DSL.
Assuming you already followed Verizons instructions to set the Westell modem to bridge mode setup your router to work with it.
Step 1: Go into the modem typing its address... Default 192.168.1.1   leave the ID blank and the default password is admin.
Step 2: Go to the Basic > Setup screen.
Step 3: Select PPPoE and the screen menus will change
Step 4: Enter your Verizon ID (exclude @Verizon.net)
Step 5: Enter your Verizon Password.
Step 6: Go to the bottom of the screen and hit Save.   Wait and the router will indicate it was saved.
That's it.  All you need are the three entries above to get it working. Turn off the PC, Router and Westell.   Turn on the Westell, then the router and then boot the PC.   It should work at this point.    I now get the full DSL speed for both downloads and uploads.
The bottom line....check you router, especially the older models for updated firmware before you give up on it.

Glad top see you found a configuration for your Westell and Linksys to function. Thanks for posting resolution.
Mike_VZ
Verizon Support
Notice: Content posted by Verizon employees is meant to be informational and does not supersede or change the Verizon Forums User Guidelines or Terms of Service, or your Customer Agreement Terms and Conditions or Plan.

Need help with HD capture and timeline settings

I am trying to capture HD shot on a Z1. I am using a sony M10u. What settings should I set FCP to for log and capture and for the project timeline. I only have the deck for 24 hours and have about 15 hours of footage so time is not on my side. I am in PAL. Thanks Atnony

hi, easy setup / HDV / hdv 1080i/50 (if you are in the UK), or 1080i/60 for ntsc. when you enter log and capture it will open the hdv capture tool and bobs your uncle, does your deck connect via firewire? because this setup is under the assumption that it is. now be swift capture like your life depended on it, be sure to do a short test then get it in. good luck.

Problems with Customer Service AND unexplained charges!

I've been with Verizon for I-don't-know-how-many years, and through the years you are bound to have a few problems here and there but some of the problems are just ridiculous! It's also the same reocurring problem!!!!!!!!!!!!!!!! I was with Alltel first, before it was bought out by Verizon. The years I was with Alltel, I didn't have near as many problems. It seems EVERY time I do the smallest change or something to my phone or bill, I get a ridiculous amount of charges that I was NOT aware of, nor told about... EVEN IF I ask "So this isn't going to change my bill, or there will not be any unexpected/unexplained charges that I don't know about?"... BUT not matter how many times I ask... and NO matter how many times I am told "no"... there always is. For example.... last year, I updated and signed a new 2 year contract and purchased the first Driod. Before, my 30 day warranty was up, I was having problems with my Driod, and decided to send it in and get a new one. Before I did this.. I called customer service to make sure there would be no interuption in my bill, and there wouldn't be any unexpect charges, and there would be no difference in anything. I was told there was not, and once I recieved my new phone, just send it in and nothing would be changed. Of course, when I get my bill.. I see I was charged $500 for the new phone. It was explained to me that my credit card was reimbursed (which I never check that card, because I never used it expect to purchase the phone) and that I was recharged for the new phone, since it was a new phone. So I had to fork out the $500 (on top of my bill) and then wait months to get the $100 rebate card. Months after that, I "assumed liablity of my line" because I was on a plan with my family. I decided to have my own line, so I "assumed liability." I was not told that when I did that, I "renewed" my contract date. So I just added 6 more months to my 2 year contract. Was NOT told about that! Then again...... I was recently having problems with my Driod (the screen went black and would not come back on.) I had to turn on an OLD motorola razor, so I would not be without a phone for two days while I was waiting on my phone to come in. As soon as my phone came in, I had my Droid turned back on. I recieved my bill recently, and my bill was $200 over what it normally should be.... so I called in... apparently, when I had my phone replaced, they dropped off my data package and when I recieved my replacement driod, they never put it back on. So I was being charged for alllll my data usage... again I was NOT told about this. I wasn't even aware that they had dropped off my data package, and when/where did they get the authority to do that??? These are just a FEW of the problems that I have had.................................
Does anyone have these reoccuring problems!?

I understand that my bill can be viewed online, and I do view it fairly regularly, so if there are any unexplained charges, I can call Verizon asap. The problem does not come from me not understanding my bill, but from customer service. I have been with Verizon for a very long time, and it is a continuing problem. Where did Verizon get the 'OK' to drop my data package off my plan? Who authorized that?
After calling Verizon and trying to find out the problem, the gentleman told me that when I activated on old phone while I was waiting on my new Droid to arrive, my data package was dropped off and I "should" have been told about that. When I reactiviated my new Droid, I "should" have called and had them restart my data package. I was not aware that when you activate an old phone that data plan is taken off your plan. In all my years of having cell phones, I never make two years with one phone. I have always, at one point, had to turn on an old phone, and my data package has NEVER changed. Why would I have my data package dropped and why would I have to call Verizon to have it restarted. I would never know to do that unless I was TOLD that my data packaged HAD to be re-added when I recieved my new phone, but I was never told of that.
All of that is beside the point, the point is, Verizon was never given the authorization to change my plan. Never. My bill was taken care of and readjusted, and I am thankful for that. It does not change the fact it is always a hassle with Verizon Customer Service and I am always the one having to PROVE that I am not at fault, or that I was NEVER told of certian things. EVERY TIME I HAVE CALLED CUSTOMER SERVICE, I AM TOLD "I'M SORRY, THEY SHOULD HAVE TOLD YOU THAT."
"they should" does not help my bill with the extra armount of charges.

Dual monitor setup with Docking station and W500 on windows 8

Hi there
I have a w500 with ATI Radeon 3650
Trying hard to have it set up with windows 8 and two monitors with my docking station. It worked with XP, Vista, W7...but no go now.
Any solutions out there? I don't care about catalyst control center, or which drivers I have to use, just give me back my two monitors connected to a docking station

I have the same W500 setup and have had no luck finding Windows 8 drivers on Lenovo's site or AMD's. I have a support ticket in to Lenovo to see what they come up with. I have two flat panel monitors that I need to work. According to MS, Catalyst Control Center has compatibility issues with Win8. It was easy to set up both monitors under Win7 with CCC. I have not been able to set them up using Windows display setting in Control Panel. Does anyone out there know of an app that I can use to replace CCC and run two monitors?
kb5

Windows 7 Professional PC hangs at "Loading files" when trying to boot with custom capture image on Windows Deployment Services.

I have created a custom capture image in WDS. Now when I try to boot my reference PC into this image the PC hangs at "Loading files". The reference PC is running Windows 7 and I am using Windows Server 2012 Standard on my server.
I have followed the instructions on how to create the custom capture image on the server to a fault. I PXE boot the PC and it shows the capture images after I hit F12. The problem is that it starts to boot and then hangs about 2/3 way through the progress
bar.
Any help would be appreciated.

Hi Derrick Logan,
We need know the detail phases your client hang, if it is irregular status, please collect the WDS log then post it. You can refer the following similar thread solution first.
How to enable logging in Windows Deployment Services (WDS) in Windows Server 2003, Windows Server 2008, Windows Server 2008 R2, and in Windows Server 2012
http://support.microsoft.com/kb/936625/en-us
Windows is loading files... Hangs on WDS
https://social.technet.microsoft.com/Forums/windowsserver/en-US/baacadc4-830d-43e1-ace8-3292e886958e/windows-is-loading-files-hangs-on-wds?forum=winserversetup
WDS hangs at "Windows is loading files..." on a LAM jhl91 laptop
https://social.technet.microsoft.com/Forums/windowsserver/en-US/3ebb6e0b-9f05-4fee-b3c0-129c34bb879d/wds-hangs-at-windows-is-loading-files-on-a-lam-jhl91-laptop?forum=winserversetup
I’m glad to be of help to you!
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Are Easy Setups with Custom Capture and Sequence Presets Portable?

Similar Messages

Maybe you are looking for