Are slow smb transfers normal?
Hi All,
As I write this, I am trying to transfer 23 GB of data from my local drive to an smb share on a Linux file server. This and other transfers I have made to smb shares are stupefyingly slow: about 1/20 the speed my Linux and Windows machines will do the same transfer (100 base-T). Is this normal for 10.6.4?
Many thanks,
-T
ifconfig en0
en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
inet 192.168.255.184 netmask 0xffffff00 broadcast 192.168.255.255
media: autoselect (100baseTX <full-duplex,flow-control>)
status: active
Some people reporting this problem have traced it back to the good old Nagle algorithm. The following page has something to try on the MacOS X side as well as some possible fixes on the Linux Samba server side.
http://blog.julipedia.org/2006/02/samba-performance-under-mac-os-x.html
I was trying to transfer her documents and Thunderbird profile.
Thank you for the link. I could not locate an /etc/sysctl.conf file, so I create one and rebooted. No joy.
I did find:
http://forums.whirlpool.net.au/archive/965569, and
http://discussions.apple.com/thread.jspa?threadID=1424000&tstart=0
Supposedly, it is just bug that has yet to be fixed in Snow Leopard. Hopefully the user I turn this thing over to will not notice it when operating on single files. She needs Adobe's (yes elderly) CS3, which run well on Mac.
Thank you for all the help. And sorry for the cranky old man stuff.
-T
sudo sysctl -w net.inet.tcp.delayed_ack=0
net.inet.tcp.delayed_ack: 0 -> 0
Similar Messages
-
When I open FIrefox normally, the cursor movement is very jerky - seems to get stuck on every link. In addition typing in any box is delayed. When I restart with add-ons disabled and in safe mode, the cursor moves fine and typing is normal. I have disabled all my add-ons but that doesn't seem to help as each time I restart, the jerky cursor and delayed typing present again. What is wrong?
Thanks - that seems to have solved the problem
-
Replaced 2008 DC, now remote systems are slow to browse network
I just replaced our DC that also served as one of several DNS servers. All FSMO roles were transferred to the new DC before demoting.
After doing so, the majority of our remote sites (connected via site-to-site VPN), can no longer access the UNC path of the file server also located in each remote site, and if they can, it is extremely slow. However, this isn't happening to every
remote site. Affected sites are also unable to access UNC path via IP address, although nslookup/pings resolve normally. The temporary workaround is to remove all affected systems from the domain. As soon as those machines are removed from
the domain and rebooted, accessibility to these paths returns instantly.What did you replace your 2008 DCs with?
Are you using WINS?
Transferring FSMOs wouldn't have anything to do with this. FSMOs are operational role holders that perform tasks for the domain and forest, and do not have anything to do with speed or authentication. However, I've seen slowness occur due to authentication
issues, especially with older operating systems and apps.
I've also seen issues with the TCP Chimney that can cause slowness.
TCP Chimney and RSS Feature May Cause Slow File Transfers or Cause Connectivity Problems
Published by Ace Fekay, MCT, MVP DS on Aug 20, 2009 at 12:44 AM, Updated 10/26/2014
http://blogs.msmvps.com/acefekay/2009/08/19/tcp-chimney-and-rss-features-may-cause-slow-file-transfers-or-cause-connectivity-problems/
And if you replaced the DCs with 2012 or newer, you will also want to inventory your applications to make sure that nothing is using NTLM v1 or LANMAN, which no longer be supported in Windows 2012 R2. So if you have any older apps that are using the
older authentication methods, they may no longer work.
More info:
Understanding Active Directory Domain Services (AD DS) Functional Levels
http://technet.microsoft.com/en-us/library/understanding-active-directory-functional-levels(v=ws.10).aspx
Windows Server 2012 slow network/SMB/CIFS problem
http://jrs-s.net/2013/04/15/windows-server-2012-slow-networksmbcifs-problem/
Ace Fekay
MVP, MCT, MCSE 2012, MCITP EA & MCTS Windows 2008/R2, Exchange 2013, 2010 EA & 2007, MCSE & MCSA 2003/2000, MCSA Messaging 2003
Microsoft Certified Trainer
Microsoft MVP - Directory Services
Complete List of Technical Blogs: http://www.delawarecountycomputerconsulting.com/technicalblogs.php
This posting is provided AS-IS with no warranties or guarantees and confers no rights. -
IPhone isn't recognized by iTunes, and when it is, data speeds are slow!
Hey all,
For the last few months I have been having an issue with the drivers on my computer for Apple iPhone. Before, it would connect to iTunes just fine, and would work flawlessly. Now either it connects to iTunes and it being recognized by Windows Explorer as a camera doesn't show up, or Windows Explorer picks it up as a camera, but it doesn't communicate with iTunes. I have noticed that when the PC picks the phone up as a camera, "MTP Device" shows up under "Portable Devices" in Device Manager. When iTunes can pick the phone up, it shows up under "Universal Serial Bus controllers" as "Apple Mobile Device USB Driver".
I have tried various tricks with driver installing/uninstalling. If I want my computer to connet to iTunes, I need to uninstall and reinstall the driver with my iPhone connected, or it doesn't work at all. It appears as a hardware error and driver error before I uninstall the driver. Deleting the driver software does nothing. When I do this trick, the transfer speeds between my iPhone are slow. An example is, it takes 5 hours to synchronize 161 songs to the iPhone. If I can manage to get the iPhone to show up as a device under the USB controllers, transfer speeds between the computer and phone are normal. Changing the USB cable and chosing a different port doesn't help. A complete restore of iOS software revealed no results. I just started with a clean OS install a half a year ago, I am not looking forward to wiping my OS to fix this... any help on fixing this? Thanks.Have you tried to reset the iphone, holding the sleep and home button together for 10 seconds?
Also, a firewire cable only charges the iphone. You will need a usb cable to sync - the usb cable does not allow for charging I think.
When opening the preference window in itunes, there should be a Sync icon, all the way to the right, when clicking on that Sync icon - I think it is the iphone icon - does the name of the iphone appear in the window? -
just update my iMac from Mountain Lion to Mavericks and the application are slow to open. The same happens to opening webpages . Please help
Resetting your Mac's PRAM and NVRAM
Intel-based Macs: Resetting the System Management Controller (SMC)
Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
Reinstalling Mavericks, Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion, Mavericks: Select Reinstall Lion/Mountain Lion, Mavericks and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless. -
IWeb sites are slow to upload. text columns turn to heavy png files
Hi!
Yes I've noticed that iweb sites for some odd reason are slower to load on any browser. No matter what the hosting is. I use Me.com for a few years and iWeb as I don't have the time or patience to bother with Dreamweaver. I use Me.com for hosting as well as another web hosting server. If there is graphic material on the page, it takes so long to open. Apple must do something about it for sure.
The program iWeb itself doesn't open up fast enough if you have more than 3 pages on it (which any normal site would have). I'm glad Apple made good changes in iWeb09, but it needs to do something about the speed of the program, the sites it makes and how it processes simple matter on it.
Even though, I have come across some good examples of iWeb made sites that are easy and relatively faster to open or they open at a normal speed. The authors also have used flash material on their iWeb sites. I have a non-registered program (web site Maestro) that claims to ease up and streamline the graphic and other heavy content on a iWeb site to make it lighter with loading.
But the unregistered version works on 70 percent files only. And I don't really notice any difference with it either. So I'm doubtful of buying the full version.
Any thoughts? Solutions? Would really appreciate.
ANOTHER ISSUE that I have discovered while making iWeb site is that a text column put on a shape after publishing turns into a heavy PNG picture file that can weight almost upto 1 whole megabyte!!!
And you keep wondering why the darn page is so slow to open!!! Cuz a simple text could've been just about 50kb. But it turns into a 900kb picture in png!!! Is there a way to change this?? I guess, taking out the picture from the published site folder and reediting it in - say - Photoshop reducing its size may help. But its so cumbersome and arduous to go into every darn folder and open all the text now converted into pics and re-edit them!! And then their reduced quality will make the text look feeble and bad quality too.
This is a problem that APPLE iWEB experts Must work on. iWeb gives a certain flexibility as its like a free flowing canvas. But then its also a known fact that iWeb sites are exceptionally heavier to open, unless you know many other tweaks here and there to make it work right. But again, this is contrary to the purpose of iWeb, cuz its made for amateur site makers.
I wish there is a work around this thing really.
ANY SUGGESTIONS FRIENDS?? WOULD LOVE TO HEAR. PLEASE SHARE YOUR THOUGHTS AND SOLUTIONS.
Thanks.
Regards,
NiteshWelcome to the Apple Discussions. Shapes by their very nature are graphic elements that end up a png file whether there's text in them or not. You should try adding the text in a text box above the shape and see if there's any difference. Just be sure to use a Web Safe Font and not add any enhancements that will turn it into a image file:
Click to view full size
You may not notice a difference with loading with WSM but those with Internet Explorer should. Have you tested your site with and without WSM on a PC?
In WSM you can set the amount of optimizing for graphics. I've set it at about 60% (moderate) and haven't tested other settings for image quality. I'm sure a lower quality level, i.e. more compression, will have a impact on file loading. I just don't have a feel for the greatest amount of compression that will still have acceptable image quality. You'll just have to experiment.
If your site is a commercial site then using a commercial hosting server is the best option. Also, it's reported that using a Text Based Navbar instead of iWeb's java based one will help dark side compatibility.
Be sure to put in feature requests for the improvements that you see necessary to Apple via http://www.apple.com/feedback/iweb.html.
OT -
10.6.8 Slow SMB browsing of Windows Servers 2008
MY IMAC 21 .5 Inch MAC OS X 10.6.8 slow SMB browsing of windows Server 2008 kindly anybody have any idea why its happened or after LION release maybe this issue will be solve.
Hehe... Servers are tricky things for sure.
It sounds like you're expecting to have users log in from outside your network, but that you're testing from within? Is this the case?
If your users are trying to log in from outside the local network of the server, then you'll need to ensure that the correct port forwarding is set up on your firewall.
Next thing I'd try... Simplify your share to ensure that the problem isn't with your group set up. Eliminate all the ACL's associated with it.
Add one sole user to the ACL, give it read and write, and try to log in using that credential.
Ensure that the POSIX Permissions are set to default. (administrator should be the owner, staff should be group, read and writable only by the owner, everyone else gets read only)
If that works, remove that user, add a group to the ACL and try and log in using a user that's listed in the new group specified.
Perhaps if you supplied a little more info about your server and how it's connected to it's network. What it's roles are etc. we might be able to give a little more insight.
HTH
-Graham -
JDE 9.1 menus are slow during recording with OpenScript
Hi,
JDE 9.1 menus (navigation) are slow during recording with OpenScript (newest version: 12.3.0.1 Build 376). If I turn off recorder everything works normal and fast.
The problem is speed.
Is there any preferences in OpenScript that can handle this issue? Why is this happening?
Thanks, ProvenSeeing similar things - what browser version are you using? From what I have seen there is something happening with the BHO enabled on the browser. We have seen a performance hit on IE 8 & IE 9 while recording and playing back
The browser just seems "busy"
Haven't tried reverting back to 12.2 but have an issue open and provided IE memory dumps to Oracle .... will keep you posted on what they tell me -
After installing Mavericks, computer is slow and applications are slow to open
Mavericks has slowed my IMAC to a crawl. Applications are slow to open. Disc burning is slow as well as photo editing. Any Idea's
We need more info about your iMac other than "My iMac is running slow."
What year, screen size, CPU speed and amount of RAM installed?
To find out info about your system, click on the Apple symbol in the upper left of the OS X main menu bar. A drop down menu appears. Click About this Mac. A smaller popup window appears. This gives you basic info like what version of OS X your iMac is running, the speed of your iMac's CPU and how much RAM is installed. Click on the button that says More Info. A larger window appears giving you a complete overview of your iMac's hardware specs. Highlight all of this info and copy/paste all of this into another reply to this post, editing out your iMac's serial number before actually posting the reply. This will tell us everything about your iMac so we may begin to help with your iMac issues.
How full is your Mac's hard drive?
Locate your iMac's hard drive icon on the OS X desktop. Click the icon once, then use the keyboard key combination Command-I. This will give you additonal info about your iMac's internal hard drive.
How many applications do you run simultaneously in the background while working in another application?
Do you run any antivirus software on your Mac? Antivirus software can slow down the normal operation of OS X.
Conpletely uninstall any virus software you have installed following the anti-virus deveolper's instructions.
Do you run any "crapware" like Mackeeper or any other type of "crapware" like so called hard drive "cleaning" apps?
Another her possibilty is that some hardware, like your iMac's hard drive, could be failing. -
When I'm typing in the key words in the search field, there is a delay between my key stroke and the appearance of the letter in the search field. If I type at a normal speed, usually one or two letters are skipped and have to back track or start over. My key words will appear correctly if I wait for a letter to appear before I enter the next key stroke.
Many of my web pages are slow to load, or they time out.Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]] -
Problem:
When I plug in my iPhone to sync, it starts but does not complete the process and several pieces of data are not being transferred to my iPhone from my MacBook Air.
Any help that you can provide in helping my iPhone accurately sync with iPhoto and iTunes will be greatly appreciated.
Symptoms:
1) Sync: It’s not completing the sync. Below, I’ve provided all of my settings from the iTunes Summary tab so that you might tell me if I’ve selected any incorrect options. I prefer to sync the “old school” way – by connecting to the computer – as opposed to syncing over the cloud. Perhaps this is what’s causing the problem? Here is a list of the steps displayed in the iTunes window as the sync progresses:
waiting for sync to start (step 1 of 7)
backing up (step 2 of 7)
preparing to sync (step 3 of 7)
determining apps to sync (step 4 of 7)
preparing apps to sync (step 5 of 7)
importing photos (step 6 of 7)
waiting for changes to be applied (step 7 of 7)
syncing apps / copying 1 of 4 (App name) (step 7 of 7)
canceling sync
apple icon
2) Photos: I've selected only certain of my iPhoto albums to sync to my iPhone. All of the albums are correct/complete in iPhoto. All of the albums are listed on my iPhone, both before and after the sync, but the albums are empty (no actual photos) before and after the sync. Perhaps this is tied to the fact that the sync isn’t completing, but because “importing photos” is one of the steps that the incomplete sync displays, I don’t know.
3) Apps: When I launch iTunes and click on the Apps folder under the Library listing, then click on the Updates tab, iTunes searches for any Apps needing to be updated and provides a list. If I click on Update All, the Apps are successfully updated in iTunes. But, when I plug in my iPhone so that the updates will transfer to the apps on my iPhone, the updates don’t transfer to the apps on my iPhone and those apps still reflect that they need updating on the iPhone.
Other Potential Pertinent Info:
The flash memory hard drive on my MacBook Air recently died (perhaps a month or two ago). Apple had emailed me about a known issue and literally the next day, my MacBook Air crashed. I installed a new flash memory drive and re-installed everything from a backup off of an external hard drive. Everything seems to be working fine; it recreated accurately all of my software and data, including iPhoto and iTunes, the pictures and songs (respectively) for which are stored on that hard drive, as opposed to being on the flash memory in the MacBook Air itself. However, I don’t recall if the start of the sync problem described herein started happening at the same time that I replaced the flash memory drive. All I know is that the computer is working perfectly in all respects and that even as the sync is failing, it at least says that it’s doing the right things and looking in the right places (e.g., the list of albums on my iPhone matches the list of albums in iTunes, etc.).
Settings/Status:
MacBook Air
OSX v. 10.9
iPhoto ’11 v. 9.5 (902.7)
iPhone iOS 7.0.4
iTunes v. 11.1.3 (8)
Summary Tab
Backups (This Computer)
Options
Automatically sync when this iPhone is connected
Sync only checked songs and videos
Photos Tab
Sync Photos from iPhoto (429 Photos)
Selected albums, Events, and Faces, and automatically include (no Events)
Albums – 9 are selectedYou need to download iTunes on your computer. iOS 6 requires the latest version of iTunes which is 10.7.
-
ipad 4 retina display is slow after iOS 8, also upgrade to iOS 8.0.1 i think and safari is slow, animations are slow, and i can't restore it to iOS 7, there it was great. i mean its like my iphone 4 with iOS 7 in its best days. i hope no to get stuck again, i mean please let me go to the iOS 7)).
Upgraded my ipad4 from ios6 to iOS 8 because the new WSJ app required it. HUGE MISTAKE!!!!!!! I can maybe understand some apps being slower but not Safari or Chrome. Apple must be throttling back the ipad4 processor even more with ios8 to force an upgrade to the next gen iPad whenever it arrives.
-
Line items are missing during transferring ITS to EBP--tricky problem
Hi,
We are using EBP 2.0 version.
Some shopping carts line items are missing while transferring shopping cart data from ITS to EBP.
This is happening randomly.we had checked all the shoppping cart related tables in EBP.
For example in my shooping cart 4 items are there,during transferring shopping cart data from ITS to EBP all 4 items are updating for all the shopping cart related tables except account assignment table.
In account assignment table for this particular shopping cart only 3 items are updated except first one.
This is happening randomly for few of the shopping carts that too most of the cases first item of the shopping cart was not updating reqacct table(this is account assignment table for shooping cart items).
I have debugged entire scenario,but i couldn't find the problem.
any one could you please advise me....why this is happening?whether it is a version problem?
Thanks,
RaviHello Ravi,
I guess you already checked OSS notes for this.
Have you checked in the area of ITS ?
When ITS sends data to EBP, only the actual screen data is sent:
- item procurement data from basic data
- item accounting data from accountig tab
then this data is used to update the SC.
If you have debugged those 2 screens, you should see what is happening.
You say that only 3 reqacct lines are updated: does it means that you have the 4 lines previously created, or only 3 ?
If you change one line item quantity, you should see this updating the reqacct. Same if you go directly in accounting tab.
Finally, there are two options:
- this is an ABAP error, so you should catch it in debug
- this is an infrastrucute error (ITS is not sending the data), so you should get the data sent by ITS in debug mode
Sometimes in productive environment with an heavy loaded ITS, you can loose some data. Available memory is not enough to fill in correctly ITS session containers.
Rgds
Christophe -
Pages are slow to load or stop loading
Once I'm connected to wi-fi, my pages are slow to load or stop loading and tell me 'I'm not connected".
If you are having the problem on more than one computer it would appear not to be a computer fault or your browser that is the problem.
The first thing I would do is a factory reset of the homehub by pressing a pin into the recess button on the rear for about 20 seconds. This can often sort out problems and will also give you a "clean sheet" to start some diagnostics from.
If this doesn't help please post what Infinity package you are on, I assume with 18Mbps it's Infinity 1 but please confirm, and do you have an Openreach modem and what homehub you have.
Also run this checker and post back a screen shot of the results
http://www.dslchecker.bt.com/adsl/adslchecker.welcome
and use this speed tester then carry out the further diagnostics and post back a screen shot of all the results including your IP profile for up and down. This test must be done with a wired connection.
http://speedtest.btwholesale.com/ -
After Upgrade to Yosemite, all apps are slow.
I upgraded to Yosemite and all applications are slow. ( as e.g.. starting to type in this box give me beachball for 2 seconds initially) A big difference in speed from Mavericks to Yosemite. Opening system preferences takes 3 seconds to load, and clicking on Users & Groups takes 25 seconds to open.
I do not have fire vault enabled. I did a safe boot and some apps did appear to open faster. Also did a repair disk and rebooted. No change. When Safari is open it takes 5 seconds to open a new window. I ran EtreCheck and the report is as follows;
Thanks for any help;( After pasting the EtreCheck text file, I clicked on this box to add the Thanks... , it took 2-3 seconds for the beach ball to stop spinning.)
Problem description:
After upgrading to Yosemite, all apps are slow,
EtreCheck version: 2.0.6 (91)
Report generated October 20, 2014 at 11:46:01 AM MDT
Hardware Information: ℹ️
iMac (24-inch, Early 2009) (Verified)
iMac - model: iMac9,1
1 2.66 GHz Intel Core 2 Duo CPU: 2-core
8 GB RAM Upgradeable
BANK 0/DIMM0
4 GB DDR3 1067 MHz ok
BANK 1/DIMM0
4 GB DDR3 1067 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
NVIDIA GeForce 9400 - VRAM: 256 MB
iMac 1920 x 1200
System Software: ℹ️
OS X 10.10 (14A389) - Uptime: 0:23:55
Disk Information: ℹ️
WDC WD6400AAKS-40H2B0 disk0 : (640.14 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / [Startup]: 639.28 GB (130.48 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
OPTIARC DVD RW AD-5670S
USB Information: ℹ️
Apple Inc. Built-in iSight
Burr-Brown from TI USB Audio CODEC
Canon MP480 series
Western Digital My Book 1140 2 TB
S.M.A.R.T. Status: Verified
EFI (disk2s1) <not mounted> : 210 MB
MyBookMovies (disk2s2) /Volumes/MyBookMovies : 2 TB (549.58 GB free)
LaCie LaCie Hard Drive USB 1 TB
S.M.A.R.T. Status: Verified
EFI (disk1s1) <not mounted> : 210 MB
Time Machine Backups (disk1s2) /Volumes/Time Machine Backups : 795.40 GB (322.99 GB free)
Time Machine Airdisk (disk1s3) /Volumes/Time Machine Airdisk : 100.77 GB (55.52 GB free)
EXCHANGE (disk1s4) /Volumes/EXCHANGE : 100.09 GB (45.35 GB free)
ALCOR Generic USB Hub
Prolific Technology Inc. USB-Serial Controller
Prolific Technology Inc. USB-Serial Controller
Hewlett-Packard hp LaserJet 1012
Apple Computer, Inc. IR Receiver
Prolific Technology Inc. USB-Serial Controller D
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Applications/Parallels Desktop.app
[not loaded] com.parallels.kext.hidhook (9.0 24251.1052177) Support
[not loaded] com.parallels.kext.hypervisor (9.0 24251.1052177) Support
[not loaded] com.parallels.kext.netbridge (9.0 24251.1052177) Support
[not loaded] com.parallels.kext.usbconnect (9.0 24251.1052177) Support
[not loaded] com.parallels.kext.vnic (9.0 24251.1052177) Support
/Applications/Toast 11 Titanium/Spin Doctor.app
[not loaded] com.hzsystems.terminus.driver (4) Support
/Library/Application Support/VirtualBox
[loaded] org.virtualbox.kext.VBoxDrv (4.3.12) Support
[loaded] org.virtualbox.kext.VBoxNetAdp (4.3.12) Support
[loaded] org.virtualbox.kext.VBoxNetFlt (4.3.12) Support
[loaded] org.virtualbox.kext.VBoxUSB (4.3.12) Support
/Library/Extensions
[not loaded] foo.tun (1.0) Support
/System/Library/Extensions
[not loaded] com.hzsystems.driver.CDSDAudioCaptureSupport (1.5) Support
[loaded] com.prolific.driver.PL2303 (1.5.1 - SDK 10.6) Support
[not loaded] com.roxio.BluRaySupport (1.1.6) Support
[not loaded] com.wdc.driver.1394HP (1.0.9) Support
[not loaded] com.wdc.driver.USBHP (1.0.11) Support
/Users/[redacted]/Library/Services/ToastIt.service/Contents/MacOS
[not loaded] com.roxio.TDIXController (2.0) Support
Startup Items: ℹ️
HP IO: Path: /Library/StartupItems/HP IO
Startup items are obsolete and will not work in future versions of OS X
Problem System Launch Agents: ℹ️
[loaded] com.paragon.NTFS.notify.plist Support
Launch Agents: ℹ️
[running] com.abbott.mal.launchclient.plist Support
[loaded] org.gpgtools.gpgmail.enable-bundles.plist Support
[loaded] org.gpgtools.gpgmail.patch-uuid-user.plist Support
[loaded] org.gpgtools.Libmacgpg.xpc.plist Support
[loaded] org.gpgtools.macgpg2.fix.plist Support
[running] org.gpgtools.macgpg2.shutdown-gpg-agent.plist Support
[loaded] org.gpgtools.macgpg2.updater.plist Support
Launch Daemons: ℹ️
[running] com.abbott.mal.malserver.plist Support
[loaded] com.adobe.fpsaud.plist Support
[running] com.freemacsoft.appcleanerd.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
[running] com.wdc.SmartwareDriveService.plist Support
[running] com.wdc.WDSmartWareService.plist Support
[loaded] org.gpgtools.gpgmail.patch-uuid.plist Support
[not loaded] org.virtualbox.startup.plist Support
User Launch Agents: ℹ️
[loaded] com.adobe.ARM.[...].plist Support
[loaded] com.google.keystone.agent.plist Support
[invalid?] com.macpaw.CleanMyMac.trashSizeWatcher.plist Support
[invalid?] com.macpaw.CleanMyMac.volumeWatcher.plist Support
[loaded] com.macpaw.CleanMyMac2Helper.scheduledScan.plist Support
[failed] com.macpaw.CleanMyMac2Helper.trashWatcher.plist Support
[running] com.vladalexa.MagicPrefs.plist Support
[not loaded] org.virtualbox.vboxwebsrv.plist Support
[running] ws.agile.1PasswordAgent.plist Support
User Login Items: ℹ️
AppCleaner Helper Application (/Applications/AppCleaner.app/Contents/Library/LoginItems/AppCleaner Helper.app)
Messages Application (/Applications/Messages.app)
MagicPrefs UNKNOWN (missing value)
Calendar ApplicationHidden (/Applications/Calendar.app)
Mail ApplicationHidden (/Applications/Mail.app)
Contacts ApplicationHidden (/Applications/Contacts.app)
PowerboxInjector Application (/Applications/PowerboxInjector.app)
Internet Plug-ins: ℹ️
LogitechHarmony: Version: 2.0 - SDK 10.7 Support
DirectorShockwave: Version: 12.0.4r144 - SDK 10.6 Support
Google Earth Web Plug-in: Version: 6.0 Support
Default Browser: Version: 600 - SDK 10.10
Flip4Mac WMV Plugin: Version: 3.2.0.16 - SDK 10.8 Support
OfficeLiveBrowserPlugin: Version: 12.2.0 Support
Silverlight: Version: 5.1.20913.0 - SDK 10.6 Support
FlashPlayer-10.6: Version: 15.0.0.189 - SDK 10.6 Support
Flash Player: Version: 15.0.0.189 - SDK 10.6 Support
iPhotoPhotocast: Version: 7.0
QuickTime Plugin: Version: 7.7.3
SharePointBrowserPlugin: Version: 14.3.9 - SDK 10.6 Support
AdobePDFViewer: Version: 9.5.5 Support
GarminGpsControl: Version: 4.2.0.0 - SDK 10.8 Support
EPPEX Plugin: Version: 4.1.0.0 Support
JavaAppletPlugin: Version: 15.0.0 - SDK 10.10 Check version
Safari Extensions: ℹ️
1Password
AdBlock
ClickToFlash (Disabled)
Print Plus (Disabled)
ClickToPlugin (Disabled)
OpenIE
3rd Party Preference Panes: ℹ️
Flash Player Support
Flip4Mac WMV Support
GPGPreferences Support
Growl Support
MacFUSE (Tuxera) Support
MagicPrefs Support
Paragon NTFS for Mac ® OS X Support
Perian Support
QuickTime Player X Preferences Support
WDQuickView Support
Time Machine: ℹ️
Skip System Files: NO
Mobile backups: OFF
Auto backup: YES
Destinations:
Time Machine Backups [Local]
Total size: 795.40 GB
Total number of backups: 29
Oldest backup: 2014-10-08 20:15:48 +0000
Last backup: 2014-10-20 17:32:33 +0000
Size of backup disk: Excellent
Backup size 795.40 GB > (Disk size 0 B X 3)
Top Processes by CPU: ℹ️
10% WindowServer
5% syncdefaultsd
4% Safari
1% AppleSpell
0% com.apple.iCloudHelper
Top Processes by Memory: ℹ️
266 MB mds_stores
258 MB Safari
180 MB Finder
137 MB WindowServer
136 MB com.apple.WebKit.WebContent
Virtual Memory Information: ℹ️
3.93 GB Free RAM
2.97 GB Active RAM
443 MB Inactive RAM
978 MB Wired RAM
1.82 GB Page-ins
0 B Page-outsYou could do that, but when setting up your new iMac it is a much better idea to transfer only your existing User Accounts. In other words when Setup Assistant appears, de-select "Applications", "Computer and Network Settings" and "Other files and folders". That way you will eliminate the possibility of reinstalling potentially incompatible software from your existing Mac or its TM backup. It's best to create new printer queues and preferences anyway.
Your venerable HP 1012 will probably work without any difficulty but if you need its driver download it here. If it gives you trouble try OS X's generic PostScript driver.
After configuring your user account, install original versions of your essential software from their original sources. In other words if you installed them via download from the developer's website, download them again. You might need license keys so gather them. Obviously the Mac App Store makes things easy since anything you obtain from there is already linked to your Apple ID and is easily reinstalled by going to your Purchases page.
Don't reinstall things like AppCleaner, CleanMyMac, Western Digital "Smartware" or any of that junk. You don't need it. MacFUSE is outdated. Research Prolific Technology for potential updates for their serial controller. The one you have may work, or not, but you should re-download its driver.
Consider abandoning Microsoft altogether and migrating to better solutions such as Pages, Numbers, and Keynote. They are all free with a purchase of a new Mac and are far more integrated with OS X than anything Microsoft will ever be able to accomplish.
The Burr-Brown USB device is unknown to me, so research TI's website for support if you need it.
If your essential software was distributed on optical media, you can use OS X's "DVD or CD sharing" feature to remotely mount the older iMac's optical drive so that you can install its software. It will work as though that drive were physically installed on your new Mac. Having said that, anything that was distributed on optical media is highly likely to have been outdated a long time ago.
If your essential software is old, orphaned, no longer supported, or is no longer available, meaning you have the only viable copy, the only option is to transfer it from the TM backup or older Mac. In that case be very cognizant of the likelihood for incompatibility, and have a plan for uninstalling it should it cause adverse effects. Creating a new TM backup is the way to do that. A new external HD dedicated to the new Mac is a cheap investment. When you are certain you no longer require the older Mac's TM backup, you can erase it and use it as an additional, redundant TM backup or "clone" repository – whichever you decide is best for your backup needs.
Maybe you are looking for
-
Snom phones in secondary subnet unable to call out - SIP CANCEL in SIP log
I've been trying to diagnose this very strange problem we are having. All our servers and some SNOM phones are in the subnet 192.168.100.0, the main building. They all work fine. Phones located in two other buildings connected with high-speed fiber u
-
Problem with getImportedKeys() in MySQL
Hi everyone, I am using JDK1.5.0 and the jdbc "mysql-connector-java-3.0.16" I've been trying to get the foreign keys from a MySQL 4.1 database using the getImportedKeys() method of the DatabaseMetaData class,but the method returns a ResultSet,which i
-
Two Errors during Unicode import into Target System
I exported our non-unicode 64-bit test NW 7.0 BW database as unicode and now I have started the import into the new unicode database on the target system. I am using the Single Code Page System Conversion to Unicode NW 7.0 SP16 and higher documentat
-
Display prefs showing extra display when none are connected
I have a MacBook Pro and when I go to the display preferences it shows another display when no monitor is connected. I have searched the web extensively for a fix and haven't found anyone with the same problem. I'd prefer to just delete some obscure
-
Bus powered USB switch with a printer
I think I know the answer to my question, but I'd like to get a few other opinions. Here's the question: Will the Airport Extreme supply power to a USB switch? Here's what I want to do: We have a Canon all-in-one printer in our office. When it's conn