Are there changes that need to be done to the template?

I am working on a Supplier Workplace application and attempting to print a delivery. A pdf file is generated in the same browser window. When I try pressing the back button in the browser, the system dumps with the message "An error message had been received from the Web AS. No template was
found for the basic screen of the error message (program: "SAPMSYST" scre
number: 40), and therefore the ITS service had to be terminated."
I understand there has been a session termination and that if the pdf were to open in a new window, it wouldnt cause problems. However if I wish to use the back button in the same browser window, is there something I could do to retain the session? Does it involve changes in application side or some parameters in the HTML template?
As far as I could understand, R/3 converts otf to pdf and sends it to ITS, but where and how is the pdf browser back button handled?
The system is a ECC 6.0 system that has an integrated ITS.

hi,
generated dynpro checks if there exists a particular template in the theme for that screen if it exists then it used that template else it generates the template for that screen on its own.
it wont have any permanent problems as such.
if you want to generate pdf in a new window then i suggest you make changes at the application level u can call a pdf in the custom control.
pz11_pdf transaction could be of help.
Regards,
Manish

Similar Messages

  • When converting RoboHelp HTML 9 files to RoboHelp HTML5 11 files, is it transparent and seamless or are there adjustments that need to be made to the output?

    We are considering upgrading from RoboHelp HTML 9 to RoboHelp HTML5 11. With all of our output files accessible by our customers, we want to ensure our content is always available to address their questions. When doing an upgrade to RH 11 will opening and outputting the files be seamless or will the files need tweaks to get them ready for publication? How much time would it take to adjust one page, if it's needed?
    Any insight/experience you have with this topic to share is most appreciated.
    Thank you.

    There's information on my site about fixing any List issues.
    See www.grainge.org for RoboHelp and Authoring tips
    @petergrainge

  • Have a number badge in settings that won't go away and there are no updates that need to be done.  Help!!!

    On my settings, there is a number one (red) that won't go away.  There are no updates that need to be done.

    Maybe you should try updating 5.1.1 from iTunes? Because I had the same thing and it was 5.0.1.

  • OUI-10091:There are no patches that need to be applied from the patchset

    Hi All,
    when i try to apply 10.2.0.3 patch on 10.2.0.1 in linux x86 I am getting into this error.
    OUI-10091:There are no patches that need to be applied from the patchset Oracle Db 10g R2 Patchset 10.2.0.3.0
    The original ora inventory is lost and cannot be recovered.
    So is there any way I can upgrade the database software.
    Please advise.
    thanks in Advance
    -PK

    You should first try to troubleshoot the missing inventory issue. Check this metalink document:
    OUI-67105 Due To Missing Or Corrupted Central Inventory In 10g
         Doc ID:      Note:417236.1
    ~ Madrid

  • Is there something that needs to be done in response to deadlock victims?

    So, Friday I got a report by one user about an unusual error seen. It appeared to be a one time error that went away when the page refreshed.
    I went to the logs, tried to find an associated message to see if there were actions to take.
    (Boy, I wish there were a series of books for SP admins that covered all the event and ULS log entries and what action to take to resolve them)
    When I got onto one of the farm servers to look at logs, the event log had a number of unusual warnings and errors.
    I am taking a look at some of these to see if there is something that needs to be done.
    One of the errors - which has occurred 3 times in December - is related to the search software. One says "Foundation Search" and the other two say "Server Search".
    So, are these the kinds of things that an admin should just ignore at this noise level (3 in 2 weeks) or is there something that should be done?
    The warning is 57 and says that a database error occurred - a transaction was deadlocked on lock resources with another process and was chosen as the deadlock victim.
    The first 2 times the application was Search_Service_Application, while the most recent occurrence was
    'Search_index_file_on_the_search_server'.

    Hi Iwvirden,
    Deadlocks on SharePoint databases may cause performance issues in SharePoint.
    So if the error occurs on SharePoint content databases and occurs many times, then you need to troubleshoot this issue in SQL:
    http://blogs.msdn.com/b/grahamk/archive/2009/06/15/troubleshooting-sql-server-deadlocks-and-performance-when-running-sharepoint.aspx
    http://blogs.technet.com/b/christwe/archive/2014/02/06/what-can-i-do-about-the-deadlocks.aspx
    If the deadlocks occur on Search databases, then you can ignore them if there are not too many errors.
    http://blogs.msdn.com/b/sharepoint_strategery/archive/2014/02/10/sharepoint-search-and-deadlocks-in-sql-server.aspx
    By the way, the errors about search displayed in the ULS log should be checked as these errors may influence your search function.
    Best regards.
    Thanks
    Victoria Xia
    TechNet Community Support

  • Why are my webpages taking so long to load when I am having no router, connection, or modem problems and am getting 20mb/s on speedtest? Are there settings that need to be adjusted?

    Could it be settings that need to be adjusted somewhere? I'm using osx lion 10.8.3 and google chrome.

    Did you test with other browsers and pages still load slow?
    If so and/or if you want, run a OnyX cache cleaning routine #12 here
    Step by Step to fix your Mac
    If it's Chrome, you may want to uninstall it and it's rook kit messing up the OS X works.
    Uninstall  Chrome:  https://support.google.com/chrome/bin/answer.py?hl=en&answer=95319
    Google root level auto-updater: to uninstall that (provided you have no Google software on the machine)
    https://support.google.com/installer/bin/answer.py?hl=en&answer=100386
    Firefox with the broadband tweaks is the fastest browser on Mac's, (Safari is without the FF tweaks.)
    See #6 Browser Tweaks for speed
    For Snow Leopard Speed Freaks
    Web pages snap violently and instantly on my screen unless there is a server issue or high winds are messing with the lines.

  • HT4796 Are there other things that need to be done for the Mac and the PC to link up.  Mine are on the same network.  I have enabled sharing.  The PC does see the Mac in its network but they just won't link up.

    I am trying to migrate my iTunes information from my PC to my Mac.  I have installed the migration software required on the PC.  The problem is that the Mac and the PC never link up even though from the PC I can see and access the Mac in it's network neighborhood.

    I am trying to migrate my iTunes information from my PC to my Mac.  I have installed the migration software required on the PC.  The problem is that the Mac and the PC never link up even though from the PC I can see and access the Mac in it's network neighborhood.

  • I used to be able to open Hotmail no problem....now I can't open it on Mozilla......only in Internet Explorer? Are there settings that need to be changed/

    I get to the site, but can't open any folders or inbox......

    Can you check this issue on Firefox 9?
    * getfirefox.com

  • Brand new IPOD touch does not work w Bose speaker docking station is there anything that needs to be done?. The Nano that I have works fine.

    My new Ipod touch is not working with my Bose Speaker docking station. My Nano works fine.
    Any reasons for this?

    Does Bose say it will work with your model iPod and iOS?
    Does it appear that the iPod fully seating in the dock?

  • Configurations that needs to be done at the SAP R/3 end

    Hello All,
    I am doing a File to RFC Scenario. Just like doing a File to IDOC Scenario, I have to maintain the TCODE "SALE" as in create the Logical Systems and attach it to the Clinet and also the RFC Destinations and Distribution Model, Partner Profiles and the Ports.
    Can some one guide me through the Steps which I should follow for the RFC. I am Using the BAPI " BAPI_GOODSMVT_CREATE".
    The RFC destinations are already maintained and Logical Systems are already created.
    <b>What about the Distribution Model and the Partner Profiles and the Ports.</b>
    How do I do that. Any usefl answers will be awarded points. Please let me know.
    Thanks and Best Regards
    Chakra and Somnath

    hi,
    http://help.sap.com/saphelp_nw2004s/helpdata/en/33/c6e63b60c25767e10000000a11402f/frameset.htm
    /people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit
    and check the documentation of this BAPI also.
    Regards,
    Sachin

  • I recently upgraded from 4S to 5S. There are 2 games that I wish to transfer to the new device. 1st game isn't available in the Store anymore, so can't download. 2nd game doesn't save when you change devices. How do I get those 2 apps to my new phone? Tnx

    I recently upgraded from 4S to 5S. There are 2 games that I wish to transfer to the new device. 1st game isn't available in the Store anymore, so can't download. 2nd game doesn't save when you change devices. How do I get those 2 apps to my new phone? Can I do that manually through iTunes?
    Thanks!

    Hello jon713,
    Thank you for using Apple Support Communities.
    For more information, take a look at:
    iTunes: About iOS backups
    http://support.apple.com/kb/ht4946
    App Store Application data (except the Application itself, its tmp, and Caches folder)
    Application settings, preferences, and data, including documents
    iTunes Store: Transferring purchases from your iOS device or iPod to a computer
    http://support.apple.com/kb/ht1848
    To transfer iTunes Store purchases from your device to a computer, follow these steps:
    Connect your device to the computer. If it is synced with another iTunes library, the following dialog may appear:
    Click the Transfer Purchases button.
    Have a nice day,
    Mario

  • What do I do with the Beta 10.9.3 program I've been using these past several weeks, now that 10.9.3 is out and downloaded.......I still have 'feedback assistant' in my dock........are there files I need to do something with ???  thanx

    What do I do with the Beta 10.9.3 program I've been using these past several weeks, now that 10.9.3 is out and downloaded.......I still have 'feedback assistant' in my dock........are there files I need to do something with ???  thanx..............75 yrs old and still swimmin' upstream.........

    from : OS X Beta Seed Program FAQ
    How do I get a shipping version of OS X back on my Mac?
    To get a shipping release of OS X on your Mac, you can simply install the final version of the software you are testing when it appears in Software Update.
    How do I leave the OS X Beta Seed Program?
    To leave the program, visit the Leave Program page and follow the instructions to remove your Apple ID and your computers from the OS X Beta Seed Program. This will stop pre-release updates from appearing in the Mac App Store on your computers.
    You only need to do more than you already have, if you'd rather not see future pre-release updates.

  • Dowloaded After Effects and says its up to date but there is no trace of it being anywhere on my computer. All other Softwares are there, except that one. Can't re-dowload it. Help Please!

    Dowloaded After Effects and says its up to date but there is no trace of it being anywhere on my computer. All other Softwares are there, except that one. Can't re-dowload it. Help Please!

    Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6 Do as Mylenium told you. If you don't know where it is. Go to www.adobe.com, sign in, search for the cc cleaner tool downloader and it should fix the issues. Have you went into your control panel, under programs and features and removed it from there?

  • My nook app continues to state "Please be sure you have internet connectivity, then try again."  I am currently connected to wifi and it seems that all my other apps that need to be connect to the internet are properly working.  Help!

    My nook app keeps telling me "Please be sure you have internet connectivity, then try again."  I am currently connected to wifi and it seems that all my other apps that need to be connect to the internet are properly working.  I have turn off my phone, signed off my wifi, installed a new app, but nothing is working.  My friend is having similar issues.  My phone is up to date.  I even tried taking off the wifi in hopes that it could just connect to the 3g but nothing.  Not sure if anyone else is experiencieng this issue or knows what I can do.  I think that it may be an app problem that needs fixed, but not sure. Help!

    Maybe its a Viber problem. As that is not an Apple product, why don't you try and contact the developer?

  • If VL are there to that particular VO,Is it necessary to extend the view li

    Hi Folks
    if VL are there to that particular VO,Is it necessary to extend the view links also while extending VO?
    appriciate any pointers
    Regards
    Harry

    hi
    you dont need to extend the view links ,it will be taken care by VO extension ,but when you check VORow impl of standard VO ,there you will find the refence of all VO which are having link with this standard VO ,that code you need to copy paste in your extended VORowImpl .
    Thanx
    Pratap

Maybe you are looking for