Aria2 Routine Table DHT and checksum errors

Hi,
I'm actually reinstalling my Arch system, but there comes a problem :
When I was having my previous installation, everything was working fine and the ~/.aria2/dht.dat appeared alone without giving any problem or anything.
There, I reinstall it, import my ~/.aria2 from the previous installation to my actual home directory and remove the DHT.dat.
Then I start a torrent, just to see if all is going well and everything.
I get this error message :
[...]ERROR - [DHTSetup.cc:112] Exception caught while loading DHT routing table from ~/.aria2/dht.dat
Exception: [DHTSetup.cc:104] errorCode=1 Could not open file
So, I remember when I first installed it I didn't have to create the DHT or anything, so I look inside my ~/aria2 folder and see that the dht.dat just got created.
I start another torrent and I get this error :
ERROR - Checksum error detected. file=[...]
I start 2 more torrents, same error happen.
I just wanted to ask : Is this a normal behavior that all the torrents I tried had a Checksum error and that I had a DHTSetup.cc error ?
Thanks,
Totony.
EDIT : Just looked at some informations about the DHT. It doesn't seems like the two problems are linked, but I still wonder, is this a normal error (the DHTSetup.cc). And why do all my torrents have a checksum error ? (Dependency not installed ?)
EDIT 2 : Problem got fixed, checksum errors where because of the -V option added to aria2 and DHT error is a normal error.
Last edited by Totony (2011-07-31 17:28:55)

Just adding a column and making it a text field isn't enough. You need to set the source of the column to be equal to the other columns added by the wizard. After setting it up properly, it should be fine.
Denes Kubicek
http://deneskubicek.blogspot.com/
http://www.opal-consulting.de/training
http://apex.oracle.com/pls/otn/f?p=31517:1
http://www.amazon.de/Oracle-APEX-XE-Praxis/dp/3826655494
-------------------------------------------------------------------

Similar Messages

Image tables index and triggers error generation

Hi All
While running the ETL workflow (Informatica Version 8.1) for a table (W_ORDER_D) through DAC, an error was thrown up stating “Image tables were not available”.
We thought that the image tables had been dropped somehow and in order to recreate the same we right clicked the order table and selected change capture scripts > Generate image and trigger scripts.
We tried running the script generated above in SQLplus but the same errored out when triggers and indexes were trying to get created (Trigger and Index creation were part of the script)
We then took out the SQL blocks for the creation of triggers/and indexes from the script and ran the same. This time the script ran to completion.
We then ran the ETL workflow and this also ran to completion without giving any errors.
Our question is, like we said above we removed portions of the “Generate image and trigger script” for the creation of triggers and indexes and then ran it so that those triggers and indexes do not exist in the database.
Would this in anyway cause any problems in future like affecting functionality or performance?
The original script has been uploaded.

Update on this, The capture to convert also appears not to be working for the TSQL code. The converted "Oracle" model, appears to still be TSQL. (which makes sense w/the generate error I'm getting). If I manually drop the code into the Scratch Editor and "translate" it, it appears to convert to Oracle SQL. But it is not doing so in the Capture to Convert model. The code appears unchanged there.

Checksum error for Hidden and Protected item

I have a region with 3 items - a Text field, a Text area and a Hidden and Protected item. When clicking on the save button the record should be written to the table. However I get the following error:
++Checksum error for Hidden and Protected item ID (7676217916943303), value (), posted checksum (1060941776BCEA7DDAE813A442DF01E3), expected checksum (********************************), index_i (8), index_j (1), index_m (3);++
When I change the hidden and protected field to a regular text field I am able to successfully process the page.
Do I have to do anything different when I have a hidden and protected field? Would appreciate any suggestions/comments to help resolve this issue.
Regards,
Ghazi

If you have client-side code that changes the value of a "Hidden and Protected" item after the item/value has been emitted to the page by Application Express, you need to change the item type to Hidden, instead.
Scott

Tables TCURM and T001K inconsistent Error While Creating Materials by BAPI

Hi I am Using the BAPI
BAPI_MATERIAL_SAVEDATA to create Material Masters I am creating all views for a Material.
When I repeatedly run the BAPI for Multiple runs to create the Materials for Multiple plants and multple sales Views
I get an Error Message when it is tryng to create accounting and costing View
The error is Tables
TCURM and T001K inconsistent; notify your systems administrator
I dont get this message if I create one Material.
I get this error message only when I repeat the loop and try to create Materials for different valvation areas..
Please some one give ur views ..
I promise All replies will be rewarded..
Thanks
Martin

Rob,
This is the peculiar behavious of SAP.
As i am trying to create the materials by using the BAPI with in Visual Basic.
The error can be simulated by using online data entry
i did a research on it and i found that the error can be overcome if we create the accouting view first and later oher views and this occurs if we try to create accouting views for other valuation areas are plants when we set the MRP_VIEW = "X" and ACCOUNT_VIEW = "X" and COST_VIEW = "X"
i dont know the exact reason for all this...
Thanks
Martin

ERROR -- Checksum error for Hidden and Protected item ID

Hello all,
I usually get the error:
Checksum error for Hidden and Protected item ID (10785219011206310), value (on), posted checksum (C1DEF33B4C8D57845151B7D18363B3D7), expected checksum (********************************), index_i (3), index_j (2), index_m (1);
I have already found one thread with this question - Checksum error for Hidden and Protected item ID
but there are no answers to this problem.
Any thoughts how to solve this and what is causing it??
Regards Pedro.

Pedro,
Read under the improved security section in the below article.
http://www.oracle.com/technology/products/database/application_express/html/3.1_new_features.html
I used to receive the same error because I was trying to update the value of the hidden and protected item on the same page repeatedly.
I changed the item type to hidden to avoid the error.
Hope this helps,
Dippy

Checksum error for Hidden and Protected item ID

Hi,
I created an icon which is called 'Find an employee'. When a clicked on that icon, it shows employee id and employee name. And near these names there is a select button. But, it gives the following error:
Checksum error for Hidden and Protected item ID (1558647128276141385), value (KING ), posted checksum (3F6EC88428199012945F76490A29168B), expected checksum (********************************), index_i (4), index_j (3), index_m (3);
Is there anyone who knows the reason of this error?
Regards,
Edited by: user13385266 on 23-Jul-2010 06:00

Erro Checksum error for Hidden and Protected item ID (1118508917223363)
Edited by: taylor gao on 2011-1-13 下午6:26

Trying to insert a table and getting a "While executing objectTag in Table.htm, a JavaScript error o

trying to insert a table and getting a "While executing objectTag in Table.htm, a JavaScript error occurred." message appears. how do I fix this?

Try this Technote
http://kb2.adobe.com/cps/405/kb405604.html
Try step 4 here
http://kb2.adobe.com/cps/405/kb405604.html#main_dat

Getting "Join in business component definition 'CG Opportunity My Accounts' has source fields that come from tables 'S_OPTY' and 'S_ORG_EXT'(SBL-DAT-00452)" error after upgradating to siebel Open UI 8.1.1.11

Hello Team,
We have upgraded from Siebel 8.1.1.3 to Siebel Open UI 8.1.1.11.
But after up-gradation we are getting the below error in "My Account Opportunity" View.
We detected an Error which may have occurred for one or more of the following reasons:
Join in business component definition 'CG Opportunity My Accounts' has source fields that come from tables 'S_OPTY' and 'S_ORG_EXT'(SBL-DAT-00452).
Thanks,
Tirupati Nanda
Mob:-9742404115

Hello Team,
We have upgraded from Siebel 8.1.1.3 to Siebel Open UI 8.1.1.11.
But after up-gradation we are getting the below error in "My Account Opportunity" View.
We detected an Error which may have occurred for one or more of the following reasons:
Join in business component definition 'CG Opportunity My Accounts' has source fields that come from tables 'S_OPTY' and 'S_ORG_EXT'(SBL-DAT-00452).
Thanks,
Tirupati Nanda
Mob:-9742404115

Solved: checksum error for hidden and protected item ID

hi all,
I have 3 tabs namely search,create and reports.
when i move from
search to create ----> works fine
search to reports----> works fine
create to reports ---> works fine
create to search ---> works fine
but after comming to reports tab when i click to any of the tabs
error occurrs as follows
Checksum error for Hidden and Protected item ID (5322228830115090), value (R4897903101326173), posted checksum (A2328AA561179133CD115ABB81EB0333), expected checksum (********************************), index_i (2), index_j (1), index_m (1);
Please could any guide me to rectify this error?
Note: This error happened after i copied a report from the create page to the report page. and that report page is having an hidden item.
Thanks in advance
bye Srikavi

Hi all,
i changed the hidden and protected item as hidden.
Works fine.
but, a question if it is hidden and protected item what should be the solution?
why this kind of error occured?
bye
Srikavi

Erro Checksum error for Hidden and Protected item ID (1118508917223363)

i am generating one report with delete option.For delete Link i am using one HIdden item P1_SELECT
when i select it with text field then no error.but when i select it hidden then it show me
Checksum error for Hidden and Protected item ID (1118508917223363), value (2), posted checksum (C4733DF9C658202B914CF661E2349FFC), expected checksum (********************************), index_i (6), index_j (4), index_m (4);How can i remove this error.
Thanks

Hi,
The problem is when you are creating an item "Hidden and protected" so apex will associate a checksum value for that item's value and as you are changing the value, the checksum will not changed.
If there is no security issue use "Hidden" instead of "Hidden and protected" for that item.
Regards,
Kartik Patel
http://patelkartik.blogspot.com/
http://apex.oracle.com/pls/apex/f?p=9904351712:1

Zfs scrub took forever and generated many checksum errors

Hi,
I have one machine running Solaris 10 10/07 X86_64. It has been a few days since I started "zpool scrub <pool>", but scrub still hasn't made much progress (still at 1.79%). I wonder if the scrub operation will ever complete. On a 4TB file system, how long does "scrub" run to finish generally?
Also running scrub generated many checksum errors on many disks, is this normally expected? Or something is wrong with hardware?
Any advice how to make scrub run faster?
$ zpool status
pool: bigpool
state: ONLINE
status: One or more devices has experienced an unrecoverable error. An
attempt was made to correct the error. Applications are unaffected.
action: Determine if the device needs to be replaced, and clear the errors
using 'zpool clear' or replace the device with 'zpool replace'.
see: http://www.sun.com/msg/ZFS-8000-9P
scrub: scrub in progress, 1.79% done, 27h51m to go
config:
NAME STATE READ WRITE CKSUM
bigpool ONLINE 0 0 0
raidz1 ONLINE 0 0 0
c3t0d0 ONLINE 0 0 16
c3t1d0 ONLINE 0 0 14
c3t2d0 ONLINE 0 0 12
c3t3d0 ONLINE 0 0 16
c3t4d0 ONLINE 0 0 6
raidz1 ONLINE 0 0 0
c3t5d0 ONLINE 0 0 65
c3t6d0 ONLINE 0 0 66
c3t7d0 ONLINE 0 0 87
c3t8d0 ONLINE 0 0 87
c3t9d0 ONLINE 0 0 62
spares
c3t10d0 AVAIL
Simon

what % of the 4tb is used? you could zpool scrub -s <pool> (prob know this..). zpool manpages has: "whereas scrubbing examines all
data to discover silent errors due to hardware faults or disk failure."
are you seeing any hw issues with disk controllers or disks themselves in /var/adm/messages since you say you have checksum errors? any fault lights on any disk or array in use?

Error: Tables TCURM and T001K incosistent

Hi Folks,
When I tried to execute the tcode MM06, I got the following error message:
Tables TCURM and T001K incosistent; notify your systems administrator
Can anybody please help me solve this problem?
Your help would be highly appreciated and rewarded accordingly!
Thanks in advance!
Regards,
Faisal

maybe you need to address with sap ...
Check for some notes in service market place
with the error
M3 821 "Tables TCURM and T001K

Cabextract throws checksum error when extracting jre/jdk 8u5 and 8u11 windows executables

When using cabextract to extract JDK and JRE 8u5 or 8u11 .exe files checksum errors occur in certain cab files.
Here's what happens:
Extracting cabinet: jdk-8u11-windows-i586.exe
extracting jre.msi
extracting jre1041.MST
extracting jre2052.MST
extracting src.zip
extracting tools.zip
extracting COPYRIGHT
extracting jaureg
jaureg: checksum error
extracting jucheck
jucheck: checksum error
extracting jusched
jusched: checksum error
extracting task.xml
task.xml: checksum error
extracting task64.xml
task64.xml: checksum error
All done, errors in processing 5 file(s)
Do we have a problem here? Does anyone know why the binaries are failing when decompression?
I've double verified the md5sums of the java binaries.
-Mad.

When using cabextract to extract JDK and JRE 8u5 or 8u11 .exe files checksum errors occur in certain cab files.
Here's what happens:
Extracting cabinet: jdk-8u11-windows-i586.exe
extracting jre.msi
extracting jre1041.MST
extracting jre2052.MST
extracting src.zip
extracting tools.zip
extracting COPYRIGHT
extracting jaureg
jaureg: checksum error
extracting jucheck
jucheck: checksum error
extracting jusched
jusched: checksum error
extracting task.xml
task.xml: checksum error
extracting task64.xml
task64.xml: checksum error
All done, errors in processing 5 file(s)
Do we have a problem here? Does anyone know why the binaries are failing when decompression?
I've double verified the md5sums of the java binaries.
-Mad.

MRU checksum error on tabular form - please help - is intermittent.

Good old error
"Error in mru internal routine: ORA-20001: Error in MRU: row= 1, ORA-20001: ORA-20001: Current version of data in database has changed since user initiated update process. current checksum = "84A1B18AC58C9ACF03A56DA81FD75F4A", item checksum = "557F9719C364FB3D758290FB612E5FBC"., update "HBMRX"."RX7B_NODE_ALLOC" set "NODE_ALLOC_ID" = :b1, "CALC_BASIS_ID" = :b2, "QUANTITY" = :b3, "FORMULA_FLAG" = :b4, "FORMULA_TX" = :b5"
In the past when I have had this out of the blue I usually delete the region and recreate and all is fine. However I am having this error on a region in APEX 3.0 and have recreated and is intermittent.
SQL for region is similar to:
select
"NODE_ALLOC_ID",
"NODE_ALLOC_ID" NODE_ALLOC_ID_DISPLAY,
"CALC_BASIS_ID",
"QUANTITY",
"FORMULA_FLAG",
"FORMULA_TX"
from NA
where NODE_ALLOC_ID IN
(select na.node_alloc_id
from one source
UNION
select na.node_alloc_id
from another source
Updateable columns are:
"CALC_BASIS_ID",
"QUANTITY",
"FORMULA_FLAG",
"FORMULA_TX"
I have removed all Select lists and made them text fields only. I have deleted the region and rebuilt from scratch - rebuilding the MRU and MRD processes.
Most of the time it will save fine - but on about the 5th time it will error with a checksum error.
EG - edit formula_tx - add 123 - SAVE - works
then edit formula_tx add 123456 - SAVE - errors.
This is occuring on about 5 pages where I have an identical region.
Any ideas are very welcome !!

Thanks for the response (handle changed)
I have had some success today with my problem in finding there is one particular column that seems to be the cause (make it non updateable and the problem goes away) - so I will try and find out the reason for this and will post back.
If I have no joy I will upload a similar scenario onto apex.com
Marc - I am only updating one table (NA) - the criteria is looking in two places to show particular nodes which meet the criteria to be displayed on screen.
select
"NODE_ALLOC_ID",
"NODE_ALLOC_ID" NODE_ALLOC_ID_DISPLAY,
"CALC_BASIS_ID",
"QUANTITY",
"FORMULA_FLAG",
"FORMULA_TX"
select
"NODE_ALLOC_ID",
"NODE_ALLOC_ID" NODE_ALLOC_ID_DISPLAY,
"CALC_BASIS_ID",
"QUANTITY",
"FORMULA_FLAG",
"FORMULA_TX"
from NA
where NODE_ALLOC_ID IN
(select na.node_alloc_id
from one source
UNION
select na.node_alloc_id
from another source
where NODE_ALLOC_ID IN
(select na.node_alloc_id
from one source
UNION
select na.node_alloc_id
from another source
)

Checksum errors

Version 2.0
I have report and form created from the wizard. I have Session State Protection enabled and all pages and items are set to Session Level protection Arguments Must have Checksum.
When I click on the Edit link on the report and the form displays and make an edit/entry on the form and click the Apply Changes I get an error:
ORA-20001: Error in DML: p_rowid=109, p_alt_rowid=SEQ_ID, p_rowid2=, p_alt_rowid2=. ORA-20001: Current version of data in database has changed since user initiated update process. current checksum = "1AC8A6DD23D0BCAD853CF1D7FEAFAC39" application checksum = "EB83D8F93EFDBB009CC273ACD07D6A8D
1. click the OK link on the error page and go back to the form
2. click on the Cancel button on the form and get back to the report
3. click on the Edit link on the report again, make the same change/entry on the form, and click the Apply Changes and it works.
Did I miss a step setting up the Session Stat Protection?
Thanks,
Joe

Scott,
SSP is disabled and all pages, items, and application level items are all set to unrestrictive. I'm still getting the error:
Error in mru internal routine: ORA-20001: Error in MRU: row= 1, ORA-20001: ORA-20001: Current version of data in database has changed since user initiated update process. current checksum = "EE5CDC2C6554FBE4DE6E5524EA0D9ADF", item checksum = "53CDBD680C7FF8D4842FA2D63D5B8075"., update "<schema>"."<tablename>" set "SCHED_SEQ_ID" = :b1, "DESCRIPTION" = :b2, "SHOW_DATE" = :b3, "ACTIVE" = :b4
I am using a sequence as my primary key and have the Tabular Form Element for my sequence id column set up like this: http://tinypic.com/view/?pic=ru6tq9
I removed the Reference Table Owner and Reference Table Name values for security reasons, but they do contain the correct values.
Could this have something to do with the error that I'm getting? Do I have this set up correctly? The Source value is the name of the sequence id. I have also tried changing the source value to: SCHED_SEQ_ID.NEXTVAL and that didn't work either, of course.
What else can I provide you?
Thanks,
Joe

Aria2 Routine Table DHT and checksum errors

Similar Messages

Maybe you are looking for