Array Dimension Too Big Error
Hi,
For the following declaration I am getting "Array Dimension Too Big" error with Forte C Compiler on Solairs 8.
double try[23200][23000];
What is the mx dimension possible? and Where do I find such info on boundary conditions??
Regards,
Gurudatta
Hi There,
The legal limit of the array is whatever the hardwareand swap space will support.
You are asking for 8*23000*20000 bytes /1024/1024 = 3509.52 megabytes = 3.43 gigabytes.
You are declaring this much allocation locally via
automatic array in your example. You'll have to define a stack this size (hardly practical).
If you ask for this much memory with malloc() which is a much better idea, you'll still need to have enough swap.
You can also do mmap(...,MAP_NORESERVE,...) in which case you may not even need the swap to support it.
It all depends on what you are doing and why.
.....jagruti
Developers Technical Support
Sun Microsystems, http://www.sun.com/developers/support
Similar Messages
-
The offset in the file is too big"? Other than, hey it's FAT formatted, etcetera!
Does anyone have an answer for "The offset in the file is too big" error while creating a file using QT API "writeToFile"?
I mean something other it's FAT formatted, not enough space, et cetera. Anyone?First how much free space do you have on your boot drive. For normal use it's recommended to have a minimum of 10 GB free space. If you use iDVD up that to 20-25 GB. Lots of cache and swap space is needed.
Create the slideshow in iPhoto, set the disiplay size ratio to 4:3 and export it out of iPhoto at the medium or large size.
Open a new project in iDVD and add the QT file to the iDVD menu being careful to avoid any dropzones.
With a 90 minute slideshow you can use a single layer DVD disk. iDVD doesn't care about the file size of the media added to a project, only the playing time of the project, including menus.
Follow this workflow to help ensure the best quality final product:
Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image menu option. This will separate the encoding process from the burn process.
To check the encoding mount the disk image and launch DVD Player and play it. If it plays OK with DVD Player the encoding was good.
Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality. Always use top quality media: Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
You shouldn't try to create the slideshow in iDVD with still photos if the number of still photos is larger than 99. That creates a pause or stall when playing back on many set top players.
OT -
Does anyone have an answer for "The offset in the file is too big" error while creating a file using QT API "writeToFile"?
I mean something other than "it's FAT formatted", "not enough space", et cetera. Anyone?Perhaps QT is not 64-bit and you are passing it something too big. Only people who know QT would know for sure.
-
ODI-40406: Bytes are too big for array error
Hello ,
I am trying to load a flat file from a table. I am working on ODI 11G.
Following are performed.
Staging area different from SOurce is checked.
IKM used is : IKM SQL to File Append
Truncate is True
No LKM is used.
I am getting following error:
java.lang.IllegalArgumentException: ODI-40406: Bytes are too big for array
create header (RECORDTYPE,
ASSIGN_NUM,
USR_ID,
START_TIME,
JOBCODEID,
AISLE_AREA_ID,
PLANE_DATE,
CLIENT_ID,
CSTNUM,
WH_ID)
/*$$SNPS_START_KEYSNP$CRDWG_TABLESNP$CRTABLE_NAME=UNITIME TO RPSNP$CRLOAD_FILE=C:\Program Files\ODI_BI_APPS/UNITIME TO RP.txtSNP$CRFILE_FORMAT=FSNP$CRFILE_SEP_FIELD=0x0009SNP$CRFILE_SEP_LINE=0x000D0x000ASNP$CRFILE_FIRST_ROW=0SNP$CRFILE_ENC_FIELD=SNP$CRFILE_DEC_SEP=SNP$CRSNP$CRDWG_COLSNPThere is a possibility of mismatch of datatype, that can cause the problem.
Say in ODI model, you have defined a 'Date type' field to be stored as 'String' however at the time of mapping in 'Interface', no conversion happens (from date to string) for this particular object. This causes the problem.
The original query remains valid at DB side (fires for datetype) however fails while integrating (anticipating String which may be longer than defined in modelbecause of your NLS setting in DB). Therefore the best way would be to apply conversion for that particular field (in this case, use TO_CHAR(Date type,'Desired Date Format'). -
ODI-40406: Bytes are too big for array
I am getting the following error: java.lang.IllegalArgumentException: ODI-40406: Bytes are too big for array
I am trying to a file to file mapping and all of my columns match in size. Does anyone have any ideas what this problem could be? I am getting an error when it tries to perform an integration step while trying to create the target table. I am assuming it is something wrong with one of my datastores
Edited by: 897642 on Nov 16, 2011 5:19 PMThere is a possibility of mismatch of datatype, that can cause the problem.
Say in ODI model, you have defined a 'Date type' field to be stored as 'String' however at the time of mapping in 'Interface', no conversion happens (from date to string) for this particular object. This causes the problem.
The original query remains valid at DB side (fires for datetype) however fails while integrating. Therefore the best way would be to apply conversion for that particular field (in this case, use TO_CHAR(Date type,'Desired Date Format'). -
I'm trying to open a 900kb Word doc (240pages) in Pages but get this error message: Import Warning - A table was too big. Only the first 40 columns and 1,000 rows were imported.
Julian,
Pages simply won't support a table with that many rows. If you need that many, you must use another application.
Perhaps the originator could use a tabbed list rather than a table. That's the only way you will be able to contain a list that long in Pages. You can do the conversion yourself if you open the Word document in LibreOffice, Copy the Table, Paste the Table into Numbers, Export the Numbers doc to CSV, and import to Pages. In Pages Find and Replace the Commas with Tabs.
There are probably other ways, but that's what comes to mind here.
Jerry -
Hi..! TOO BIG TO HANDLE OR SOME OTHER ERROR
Hi,
I am getting the following error when i am trying to
run an plsql program..
what may be the reason..
the first and last lines are debugs in my program...
Control is not going to the function what may be the reason..
error message is as follows..
It's urgent..
before calling fn_covered_bill_coll2
TOO BIG TO HANDLE OR SOME OTHER ERROR
ORA-29280: invalid directory path
ORA-29282: invalid file ID
ORA-00054: resource busy and acquire with NOWAIT specified
TOO BIG TO HANDLE OR SOME OTHER ERROR
ORA-29280: invalid directory path
ORA-29282: invalid file ID
ORA-00054: resource busy and acquire with NOWAIT specified
Failed in idpks_events_3.fn_covered_bill_collHi,
I am getting the following error when i am trying to
run an plsql program..
what may be the reason..
the first and last lines are debugs in my program...
Control is not going to the function what may be the reason..
error message is as follows..
It's urgent..
before calling fn_covered_bill_coll2
TOO BIG TO HANDLE OR SOME OTHER ERROR
ORA-29280: invalid directory path
ORA-29282: invalid file ID
ORA-00054: resource busy and acquire with NOWAIT specified
TOO BIG TO HANDLE OR SOME OTHER ERROR
ORA-29280: invalid directory path
ORA-29282: invalid file ID
ORA-00054: resource busy and acquire with NOWAIT specified
Failed in idpks_events_3.fn_covered_bill_coll -
Error in Currency Conversion and calculated conversion rate is too big
When I am trying to execute the Query,I can see the result but I received below Warning messages.
Also I am not authorized to check the conversion rate using TCURR.
1) Calculated conversion rate 301.149,42529 is too big.
The exchange rate 301.149,42529 was calculated via the base currency USD.This produced a rate which exceeds the maximum allowed value of 9999.99999.
System response : The Processing can not be continued because the calculated rate cannot be used.
2) Error occurred during currency conversion.
You attempted to Convert the currency.The system cannot find the valid currency into which to convert the value.
The OLAP Processor cannot convert the currency.The drilldown is not changed.
3) No Exchange rate from TRY to EUR and date 13.11.2009 is found.
Please reply.
Thanks in advance!Thanks fr the info. that u all hv given ..... I ran one program frm our side which will be updating the transfer exchange rates as u all have mentioned. But then , i am receiving the warnings.
Also,when i have checked the conversion rates,they r fine.
Please find the Below diagnosis ,which they hv given.
Diagnosis:
The exchange rate 301.149,42529- was calculated via the base currency USD. This produced a rate which exceeds the maximum allowed value of 9999.99999.
System Response:
The processing can not be continued because the calculated rate can not be used.
Procedure:
Check the conversion rate to the base currency USD and the exchange rate type E. If the rates are correct, you must agree different conversion factors for the currencies in question (e.g. 100:1 instead of 1:1), so that the resulting conversion rate does not exceed the value 9999.99999. Notification Number SG 119 .
Please solve this issue.Thanks in advance! -
I have a few wedding projects(1-2 hours)I am trying to export at full hd quality,than burn in idvd. After rendering for 8hrs I receive error code that states "file is too big". Please help? compressing tips without losing quality? or any other exporting alternatives?
Hey Z,
Thank you for the tip on exporting by media browser (large) from imovie. But of course, if it's not one thing it's another. Now that I figured how to export a large file from imovie, I have an idvd issue. I followed the instructions for burning from idvd and changing the encoding to professional quality and the burn speed to x4, but I am receiving an error that states the following,
Your project exceeds the maximum content duration. To burn your DVD, change the encoder setting in the Project Info window.
Project:
- total project duration: 79:04 minutes
- total project capacity: 4.327 GB (max. available: 4.172 GB)
Menus:
- number of menus in project: 1 menus
- total menu duration: 0:39 minutes
- total menu capacity: 37.370 MB
Movies:
- total movies duration: 78:25 minutes
- total movies capacity: 4.291 GB
I have searched in the idvd forum for similar issues and I am stumped at this point. I have tried deleting the encoding assets and re launching idvd with the changed preferences, and still the same error. I know you mentioned something about free hard drive space available, and I have very little left. 4GB to be exact due to massive hours of non-edited footage. I am not sure if this is why, but I do not recall ever needing free space to burn memory onto a separate dvd. I would be more than happy if I am wrong, and it would be a quick fix. Otherwise, the technical nightmare continues. It's all a learning process and your expertise is greatly appreciated! Thanks in advance. -
SQL server error log size is too big to handle
I am working with a large database on windows sql server 2008 R2 such that it has to run continuously 24x7 because of that it is not possible
to restart the server time to time. It is kind of monitoring system for big machines. Because of this SQL server error logs are growing too big even some times up to 60-70 GB at a limited sized hard drive. I can't delete them time to time manually. Can someone
please suggest a way using which I can stop creation of such error logs or recycle them after sometime. Most of the errors are of this kind --
Setting database option RECOVERY to simple for database db_name
P.S.- I have read limiting error logs to 6 etc. But that didn't help. It will be best if you could suggest some method to disable these logs.Hi Mohit11,
According to your description, your SQL Server error logs are growing too big to handle at a limited sized hard drive, and you want to know how to stop the generation of such error logs or recycle them after sometime automatically without restarting the
SQL Server, right?
As others mentioned above, we may not be able to disable SQL server error log generation. However we can recycle the error logs automatically by running the
sp_cycle_errorlog on a fixed schedule (i.e. every two weeks) using SQL agent jobs so that the error logs will be recycled
automatically without restarting SQL Server.
And it is also very important for us to keep the error log files more readable. So we can increase the number of error logs a little more and run the sp_cycle_errorlog more frequently (i.e. daily), then each file will in a smaller size to be more readable
and we can recycle the log files automatically.
In addition, in order to avoid the size of all the log files growing into a too big size unexpected (sometime it may happen), we can run the following query in SQL Agent job to automatically delete all the old log files when the size of log files is larger
than some value we want to keep (i.e. 30GB):
--create a tample table to gather the information of error log files
CREATE TABLE #ErrorLog
Archieve INT,
Dt DATETIME,
FileSize INT
GO
INSERT INTO #ErrorLog
EXEC xp_enumerrorlogs
GO
--delete all the old log files if the size of all the log files is larger than 30GB
DECLARE @i int = 1;
DECLARE @Log_number int;
DECLARE @Log_Max_Size int = 30*1024; --here is the max size (M) of all the error log files we want to keep, change the value according to your requirement
DECLARE @SQLSTR VARCHAR(1000);
SET @Log_number = (SELECT COUNT(*) FROM #ErrorLog);
IF (SELECT COUNT(FileSize/1024/1024) FROM #ErrorLog) >= @Log_Max_Size
BEGIN
WHILE @i <= @Log_number
BEGIN
SET @SQLSTR = 'DEL C:\Program Files\Microsoft SQL Server\MSSQL11.MSSQLSERVER\MSSQL\Log\ERRORLOG.' + CONVERT(VARCHAR,@i);
EXEC xp_cmdshell @SQLSTR;
SET @i =@i + 1;
END
END
DROP TABLE #ErrorLog
For more information about How to manage the SQL Server error log, please refer to the following article:
http://support.microsoft.com/kb/2199578
If you have any question, please feel free to let me know.
Regards,
Jerry Li -
Reports getting error message that they are too big
Hi
When modifying a standard report and adding dimensions keep getting warning message indicating that the report is too big.
Is there a limit to the number of lines?
Regards
NeelHi Neel,
Administrators set a SPM UI property that will warn business user when the report they are trying to execute exceeds specified number or cells. This cell limit will depend on how your JAVA server is sized. Also SPM being an analytical application setting this too high may cause performance issue. Use the following menu path to get to this property
Administration -> Analysis Administration -> Application properties -> General tab -> Cell limit for Large Reports
Rohit -
Hi,
I am trying to sign a java applet called JUpload from http://www.jupload.biz, with a certificate that we already have purchased. The private key was generated in IIS 6 on a Windows 2003 server, and the certificate was given to us in a *.crt format.
First I tried signing the applet using just the crt file, which would import into the keystore, but as soon as I try to sign the applet, I would do the following and get the error:
keytool -import -alias JUpload -file mycer.pso.com.crt
Owner: CN=mycer.pso.com, OU=Domain Control Validated, O=mycer.pso.com Issuer: EMAILADDRESS=[email protected], CN=Starfield Secure Certification Authority, OU=http://www.starfieldtech.com/repository, O="Starfield Technologies, Inc.", L=Scottsdale, ST=Arizona, C=US
Serial number: 302088
Valid from: Fri Jul 08 10:12:26 CDT 2005 until: Sat Jul 08 10:12:26 CDT 2006
Certificate fingerprints:
MD5: XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX
SHA1: XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX
Trust this certificate? [no]: yes
Certificate was added to keystore
jarsigner jupload.jar JUpload
jarsigner: Certificate chain not found for: JUpload. JUpload must reference a valid KeyStore key entry containing a private key and corresponding public key certificate chain.
So after some digging I found that perhaps there is a problem because the crt does not have the private key. So I exported a pfx from IIS 6 which should contain the private key and did the following:
keytool -import -storepass XXXXXX -storetype PKCS12 -alias JUpload -file XXXXXXXXXX.pfx
keytool error: java.io.IOException: DerInputStream.getLength(): lengthTag=109, too big.
I have tried without the "storepass" and "storetype" flags, with no luck. Do I need to convert the pfx file to a p12 file. I read somewhere that you should just rename it, but that does the same thing as a pfx. I read also something to do with using OpenSSL, but I cannot find any examples of how I should do this.
Any ideas?
TIA
Phil DowsonScratch that, I found a copy and it did not make any difference to the issue, I still get the same error.
Do you know of any alternate download locations, the
sun site sends me to a page with a "Fatal Exception"
error.
If you are sure the export of the p12 file hasbeen
successful, you consider using
policy files for the "Unlimited Strength JCE"
depending on the size of your key.
Look at the thread of:
http://forum.java.sun.com/thread.jspa?messageID=379043 -
Crop Tool Error "Cannot complete your request because resulting document would be too big."
Hello!
Anytime I try to crop an image, I can scale to the size I need, but I cannot complete the request. I get this error "cannot complete your request because resulting document would be too big".
This only happens when I am trying to crop something, full document or PNG, JPG, etc.
I am in Photoshop CC 2014, on a Windows platform.
Any thoughts on how to fix this would be appreciated!
Thanks,
Nicole -
Exporting a sequence and getting an Error file too big message
I have tried to export a sequence using Quicktime conversion. It is a two minute clip and I keep getting an "Error, File too big" message. Does anyone know what can be happening?
What exactly are you exporting to? Settings, codec, data rate? What drive are you exporting to? How is it formatted?
-
When I try to export my file with dvcpro hd compression I get an error message that file is too big. I have exported it with mpeg successfully, but I would like to export it in its original format. My fcp file is only 19MB, and has several audio generators. The pixels on my QT video become slightly distorted at times with the MP4 codec. I have experimented exporting it with different Kbits speed from 8000 to 5000. Not sure where to go from here to get a good looking video. My full project is only 45 minutes long.
What should I try next?A 45min. DVCProHD clip (at full rez) will require about 45Gb of disk space. The size of the project file has no bearing.
What is your intended use for the exported file?...DVD, Broadcast, Web delivery?
How you export will be determined by your delivery medium.
If for Broadcast, you'll likely want full rez, but will need to ensure that you're matching your broadcasters specs.
If for DVD, (HD or SD???)...you can use Compressor or QT Conversion. Likewise for Web...you can use Compressor or QT Conversion.
Be advised that unless you're exporting full rez for Broadcast (and likely then as well, due to Broadcaster spec requirements)...you'll face some level of compression/degradation, unless you're exporting out to DVCProHD tape or for sneaker-net delivery via external hard drive.
Let us know what you intend to do with the piece and we can go from there.
K
Maybe you are looking for
-
It used to be if you did a search for "monsters" and selected a web page from the results list, the term "monsters" would be highlighted at the top of the page. You could then click on "monsters" and you would jump to the place on the web page where
-
I'm getting divorced and need to start a new iTunes Acct. Can I start a new acct and then transfer existing music and apps into it even if they were purchsed in a different acct?
-
Ok... last night I received my new 2GB iPod nano (so excited, of course!) I plugged it in, it started charging, the "do not disconnect" was showing on the iPod screen, all of which I know to be normal. I downloaded iTunes version 7, and my iPod didn'
-
I want to convert a pdf file with many pages in one jpeg file. Actually, I`m able to generate a zip file with many jpeg files corresponding to number of the page of the pdf document. Is it possible to get only one jpeg file that contains all pages of
-
I Have had a paid membership for over a year, Adobe says I have a free membership , I have PAS and AI installed and updated - When trying to re-load and/or update INDesign CC - Keeps saying my trial is over and is asking for serial number. I have uni