Exporting a sequence and getting an Error file too big message

I have tried to export a sequence using Quicktime conversion. It is a two minute clip and I keep getting an "Error, File too big" message. Does anyone know what can be happening?

What exactly are you exporting to? Settings, codec, data rate? What drive are you exporting to? How is it formatted?

Similar Messages

Error file too big

When I try to export my file with dvcpro hd compression I get an error message that file is too big. I have exported it with mpeg successfully, but I would like to export it in its original format. My fcp file is only 19MB, and has several audio generators. The pixels on my QT video become slightly distorted at times with the MP4 codec. I have experimented exporting it with different Kbits speed from 8000 to 5000. Not sure where to go from here to get a good looking video. My full project is only 45 minutes long.
What should I try next?

A 45min. DVCProHD clip (at full rez) will require about 45Gb of disk space. The size of the project file has no bearing.
What is your intended use for the exported file?...DVD, Broadcast, Web delivery?
How you export will be determined by your delivery medium.
If for Broadcast, you'll likely want full rez, but will need to ensure that you're matching your broadcasters specs.
If for DVD, (HD or SD???)...you can use Compressor or QT Conversion. Likewise for Web...you can use Compressor or QT Conversion.
Be advised that unless you're exporting full rez for Broadcast (and likely then as well, due to Broadcaster spec requirements)...you'll face some level of compression/degradation, unless you're exporting out to DVCProHD tape or for sneaker-net delivery via external hard drive.
Let us know what you intend to do with the piece and we can go from there.
K

I have created a DVD via iMovie and burned several copies. When played the DVD's will stop and display a message SKIPPING DAMAGED Part. It is not the DVD. When trying to export the project, I get an error message.

I have created a DVD via iMovie and burned several copies. It is a large file. When played the some DVD's will stop and display a message SKIPPING DAMAGED Part but will not resume. Some work fine. It is not the DVD. I have burned from several batches. When trying to export the project, I get an error message with the following message: The project could not be prepared for publishing because an error occured (-108).

TV video typically is copyrighted content. We'd be breaking several rules trying to help you. Good luck!

How do I export my iMovie '11 video and burn it to a DVD? I've tried 'Share' - 'Media Browser', 'iDVD', and 'Export Movie' but always get an error message indicating that my movie is too long to publish. Thoughts?

How do I export my iMovie '11 video and burn it to a DVD? I've tried 'Share' - 'Media Browser', 'iDVD', and 'Export Movie' but always get an error message indicating that my movie is too long to publish. Thoughts? Additionally, what does 'File' 'Finalize Project' do?

Instead of Share to Media Browser, what happens if you try Share Menu > Export Movie... (choose Large size) and save it to the Desktop?
If that fails try Share Menu > Export using QuickTime...
Then pick Movie to QuickTime Movie, then click on Options... which is just to the right of Export
Under the Video section click on Settings...
Then in the pulldown menu at the top, titled Compression Type: Choose Apple Intermediate Codec. Then click OK. And click OK again, and save it to the desktop. Once the .mov file is created, you can import that into iDVD and most likely it will work in Wondershare Creator if you prefer to use that instead.

Moving library to external hard drive and get the error "Copying files failed. The disk could not be read from or written to"

Hello,
I'm moving my library to an external hard drive.
I've made sure to use the 'Keep iTunes Media Folder Organized' option when pointing to the new library location.
I select 'File'->'Library'->'Organize Library', I select to 'Consolidate Files', click 'OK' and get ther error message "Copying files failed. The disk could not be read from or written to".
I've read elsewhere that there may be a corrupted file that I need to sequester somehow and perhaps add it back however I'm not certain how I can locate that file because the status window doesn't indicate which file it's attempting to transfer when the error appears.
Any tips?
Thank you,
Greg H
iTunes 10.6.3

OK I figured it out!
It was a dodgy file....I sorted the file folders by date, and as it turned out within the "compilations" folder there was a CD where only about half the tracks seemed to have been copied over. Could not have identified this simply from the time indicated on the finder folder sort, because there were several CDs copied over in the that same minute.
I went back to the original itunes folder, deleted all the files from that CD in itunes, then also deleted all those files from the original disk and the target disk.
Tried the "consolidate library" again, and it completed nicely. 200megs of music and videos.
Very happy to solve this problem after 3 weeks.

Attempting to log in and after about 1 minute of trying to access Acrobat, I get an error "File Not Found (404)

Attempting to log in and after about 1 minute of trying to access Acrobat, I get an error "File Not Found (404)

Hi trouble logging in,
I checked your account and everything looks fine there. What happens when you log in directly to https://cloud.acrobat.com?
Best,
Sara

I exported my iBook and got the .ibooks file on my Desktop(iMac Retina 5K), I tried to put the file into the iBooks application but I get a message that says "The file "______.ibooks" couldn't opened because it isn't in the correct format.

I exported my iBook and got the .ibooks file on my Desktop(iMac Retina 5K), I tried to put the file into the iBooks application but I get a message that says "The file "______.ibooks" couldn't opened because it isn't in the correct format. I took the same file and transferred it in my MacBook Air and was able to put it in the iBooks application no problem, the MacBook Air runs OS X v 10.9.5
Please advise as to Why it would work on an older OS X version as oppose to the newer OS X Yosemite
Thanks
JP

Thanks Lyra,
I may be doing something wrong because looking at the "Purchased" in iBooks I only see all the books that I actually purchased, none of the iBooks that I created in iBooks Author shows up. I can re-download all the iBooks I've purchased and some in iCouds, but the ones I've created in iBooks Author are no where to be found.
Any help is much appreciated,
Best Regards,
JP

Using Site Content and Structure unable to move documents,pages and getting weird error message

Hi ,
earlier we are moving a page ,document from one site to another sub site with in the Site Collection.
Now,we are getting a un-readable format error.
After selecting the destination we are getting the error.
and the file can't move.
What might me be the error.
Expecting answers related to my question.
1.As we can do using Internet Explorer,
2. Using Send To also we can move.
Using this Site Content and structure we can maintain Versoining also.
If any one face the same issue then we can easily find out the solution.
Regards ,
Prathap
SP Developer
Specify the destination to move the items you selected.

Hi,
Using Site Content and Structure unable to move documents,pages and getting weird error message
We are getting Below error:
When Moving Document items from one site to another site in the same site collection using Site content and structure(But it's working in same site,we can move documents from one library to another library)
1576|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|cccccccccnncnnnnn|

When I invoke Itunes I get an "error 7 (Windows 193)" message. I have reinstalled twice and get the same message. I have Windows 7 64 bit machine. Can someone help?

When I invoke Itunes I get an "error 7 (Windows 193)" message. I have reinstalled twice and get the same message. I have Windows 7 64 bit machine. Can someone help?

Uninstall your existing copy of iTunes. Delete any copies of the iTunesSetup.exe (or iTunes64Setup.exe) installer files from your downloads areas for your web browsers and download a fresh copy of the iTunes installer from the Apple website:
http://www.apple.com/itunes/download/
(The current build of the 11.1.4.62 installer was changed a few days ago, which fixed the bulk of the reports of MSVCR80.dll/R6034/APSDaemon.exe/Error-7/AMDS-could-not-start trouble ... but the build number on the installer was not changed. So we're trying to make sure you do the reinstall using a "new good" 11.1.4.62 installer instead of an "old bad".)
Does the install with the new copy of the installer go through properly? If so, does that clear up the error message?
If you still have the same error messages cropping up, then try the procedures from the following user tip:
Troubleshooting issues with iTunes for Windows updates

Lost all photos on my iPhoto and get the ERROR WRITING TO DISK when trying to reload from Time Machine. iPhoto cannot import your photos because there was a problem writing to the volume containing your iPHOTO LIBRARY . Looking for solution.

Lost all photos on my iPhoto and get the ERROR WRITING TO DISK when trying to reload from Time Machine. iPhoto cannot import your photos because there was a problem writing to the volume containing your iPHOTO LIBRARY . Looking for solution.

Problems such as yours are sometimes caused by files that should belong to you but are locked or have wrong permissions. This procedure will check for such files. It makes no changes and therefore will not, in itself, solve your problem.
First, empty the Trash, if possible.
Triple-click anywhere in the line below on this page to select it, then copy the selected text to the Clipboard by pressing the key combination command-C:
find ~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $ 2>&- | wc -l | pbcopy
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). The command may take a noticeable amount of time to run. Wait for a new line ending in a dollar sign ($) to appear.
The output of the command will be a number. It's automatically copied to the Clipboard. Please paste it into a reply.
The Terminal window doesn't show the output. Please don't copy anything from there.

Slow processing and getting opening errors/warnings

I've modified the PDF Binder sample to get a plugin that would open PDF's and Tif files, and save them as PDF/A-1b (code below).
It's working. The problem: it's processing too slow (compared with the Actions batch processing)... and I've been getting warnings/and errors about "The imput file is corrupt or of an unknown/unsupported type" type. This is stopping my batch process until I click OK, and the it continues.
I am trying to process a few thousand of tif files now. I tried first to use the Batch processing capability built in the Acrobat X... an it works, but only with the first 255 documents in the folder... then gives an "insufficient disk space" message for the rest of the files in the directory.
So, 2 questions: Does anyone knows why it is so slow processing the tiff files and... how I can make my code "silent" so it does not wait for the OK after the message??
Thanks in advance.
The code:
ADOBE SYSTEMS INCORPORATED
Copyright (C) 1998-2006 Adobe Systems Incorporated
All rights reserved.
NOTICE: Adobe permits you to use, modify, and distribute this file
in accordance with the terms of the Adobe license agreement
accompanying it. If you have received this file from a source other
than Adobe, then your use, modification, or distribution of it
requires the prior written permission of Adobe.
\file PDFBinder.cpp
- Implements a method to convert multiple files into PDFs and bind the PDFs
into one PDF file. The code shows how to use AVConversionToPDFHandler to
convert files to PDF and how to use PDDocInsertPages() to combind PDF files.
// Headers.
#include <stdio.h>
#include <ctype.h>
#ifndef MAC_PLATFORM
#include <direct.h>
#include "PIHeaders.h"
#endif
// Defines ----------
// Define this flag to show AVConversionToPDFEnumHandler info. in log file.
#define SHOW_TOPDF_HANDLER_TYPES
// define this flag to use file type filter
#define USE_FILE_FILTER
 Constants/Declarations
// Message display control. Ture: display
ASBool bEcho = true;
// File location. User can change the following filenames.
#if WIN_PLATFORM
 const char* STRING_PDFBinderFolder = "C:\\Fairfax\\Adobe\\in";
 const char* STRING_PDFOutputFolder = "C:\\Fairfax\\Adobe\\PDFA";
 const char* FOLDERSYMBOL="\\";
#endif
#if MAC_PLATFORM
 const char* STRING_PDFBinderFolder = "/PDFBinder";
 const char* FOLDERSYMBOL="/";
#endif
char* OutputPdfFileName = "PDFBinderOutput.pdf";
char* LogFileName = "PDFProcessLog.txt";
static ASInt32 gNumToPDFExt;
static ASInt32 gNumFromPDFExt;
static AVConversionFromPDFHandler RightHandler;
const int MAX_FILENAME_LENGTH = 256;
char sLogFileName[MAX_FILENAME_LENGTH];
// Filter -----------
// Filter is a list of file types which can be converted to PDF in this program.
// Use a filter may fit user's specific needs and ensure a smooth automation process.
// Of course, the user can turn off the filter in two ways:
// (1) gPDFBinderFileFilter = "";
// (2) comment out //USE_FILE_FILTER
// The filter should be consistent with the Acrobat viewer's menu capability:
// Create PDF from multiple files ...
// Here we put the types which have been tested, but user can expand it.
const char* gPDFBinderFileFilter = "pdf,tif,tiff,PDF,TIF,TIFF";
const int MAX_STRING_LENGTH = 2048;
AVConversionToPDFHandler gHandler;
// functions in this file.
int ConvertAndInsertFileToPDF(ASPathName aspItem, char* aFileName, PDDoc PDFfile);
void BindingFileToPDF(ASPathName aPathName, char* aFilename, ASFileSysItemPropsRec nFileAttrb, PDDoc targetPDdDoc, ASPathName outputPathName, int *ipTotal, int *ipConverted);
ASBool PassPDFBinderFileFilter(char* filename);
int ConvertAndSavePDFInTargetFolder(ASPathName aPathName, char* aFileName, PDDoc PDFfile, ASPathName outputPathName);
char* NewFileName(char *& aFileName);
// callbacks
ACCB1 ASBool ACCB2 MyAVConversionToPDFEnumProc(AVConversionToPDFHandler handler, AVConversionEnumProcData data);
ACCB1 ASBool ACCB2 AVConversionToPDFEnumFindHandler(AVConversionToPDFHandler handler, AVConversionEnumProcData data);
static ACCB1 ASBool ACCB2 myAVConversionFromPDFEnumProc(AVConversionFromPDFHandler handler, AVConversionEnumProcData data);
 Implementation
/** This sample implements a method to convert multiple files into PDF
and bind the PDFs into one PDF file .
 This sample shows developers how to grammatically implement To-PDF file
converson functionality. Basically, the code uses AVConversionToPDFHandler
to convert files to PDF and PDDocInsertPages()to combine PDF files.
This plug-in is designed to run from a menu item, and by setting bEcho = false
it may be run without any graphics user interface on the screen. Therefore, it
can be executed from other programs such as C IAC, VB IAC, and JavaScript
to meet enterprise workflow needs.
 How to run it :
 - This sample adds a menu item "PDF Binder" under the Acrobat SDK submenu. Two ways to
 execute it: 1) click the menu item to run the program using a fixed file location
 hard coded; 2) press the shift key and click the menu item to choose a folder where
 files to be converted are located.
 - Without folder selection, this original code is to convert and bind files in a
 directory C\test\PDFBinder for Win, or a folder MacHD:test:PDFBinder for Mac.
 You can copy the test files in the project's testfiles folder to the appropriate location
 for testing. You may locate files to be converted in another directory/folder, and
 specify the location in the string variable PDFBinderFolder in the code.
 - When you have the files to be converted ready in the specified location,
 run Acrobat 6 menu Advanced->AcrobatSDK->PDF Binder to start the operation. There are
 echo messages informing you of the operation start and end, but you can change and
 rebuild the code to turn off the display on screen.
 - An output file PDFBinderOutput.pdf in the same location is created
 when the program succeeds. A text log file PDFBinderLog.txt in the same
 location records the process and results.
 - You can set bEch = false in the code to turn off any display on the screen.
 This is necessary when you call the menu function from within other programs
 of C IAC, VB IAC, JavaScript.
 - An optional file filter is used to pre-process the files. The filter only allows
 the files with predefined types to be processed. You can change the file type list
 as you wish. Using a filter may ensure a smooth automation process, since you can put
 only well-tested file types in the filter. To turn off the filter, you can set
 gPDFBinderFileFilter = "" or not to define USE_FILE_FILTER
 - Note this is a sample only, developers need to make further improvement for
 their actual use. For example, you can set up a list of files to use the method for
 the conversion and binding. And you can add code to handle special file types.
 @see AVConversionConvertToPDFWithHandler
 @see AVConversionEnumToPDFConverters
 @see ASFileSysDestroyFolderIterator
 @see PDDocOpen
 @see PDDocClose
 @see PDDocInsertPages
 @see PDDocCreatePage
 @see PDDocDeletePages
 @see PDPageRelease
 @see ASFileSysCreatePathName
 @see ASFileSysFirstFolderItem
 @see ASFileSysNextFolderItem
 @see ASFileSysGetNameFromPath
 @see ASFileSysReleasePath
ACCB1 void ACCB2 PDFBinderCommand(void*)
 // if the menu item clicked with Shift key pressed down, go to interactive mode.
 // let the user to choose a folder and process all the file in the folder.
 ASText dispText = ASTextNew();
 char PDFBinderFolder[MAX_STRING_LENGTH];
 ASBool shiftKeyIsDown = ((AVSysGetModifiers() & AV_SHIFT) != 0);
 if(shiftKeyIsDown) {
 AVOpenSaveDialogParamsRec dialogParams;
 // Configure the dialog box parameters.
 memset (&dialogParams, 0, sizeof (AVOpenSaveDialogParamsRec));
 dialogParams.size = sizeof(AVOpenSaveDialogParamsRec);
 dialogParams.windowTitle = ASTextFromScriptText("Choose folder with files to bind",kASRomanScript);
 dialogParams.flags |= kAVOpenSaveAllowForeignFileSystems;
 dialogParams.initialFileSys = ASGetDefaultUnicodeFileSys();
 ASPathName thePath;
 ASFileSys fileSys;
 AVAppBeginModal(NULL);
 if(ASBoolToBool(AVAppChooseFolderDialog(&dialogParams, &fileSys, &thePath)) != true){
 AVAppEndModal();
 //AVAlertNote("Failed to select the folder");
 return;
 AVAppEndModal();
#ifdef WIN_PLATFORM
 ASFileSysDisplayASTextFromPath(ASGetDefaultUnicodeFileSys(), thePath, dispText);
 ASHostEncoding bestEnc = ASTextGetBestEncoding(dispText, (ASHostEncoding)PDGetHostEncoding());
 strncpy(PDFBinderFolder, ASTextGetEncoded(dispText, bestEnc), MAX_STRING_LENGTH - 1);
#else
 ASPlatformPath aspPath;
 ASFileSysAcquirePlatformPath(fileSys, thePath, ASAtomFromString("POSIXPath"), &aspPath);
 strncpy(PDFBinderFolder, (char *)ASPlatformPathGetPOSIXPathPtr(aspPath), MAX_STRING_LENGTH - 1);
 ASFileSysReleasePlatformPath(fileSys, aspPath);
 // remove extra path separator
 char e = PDFBinderFolder[strlen(PDFBinderFolder)-1];
 if(e == ':' || e == '/')
 PDFBinderFolder[strlen(PDFBinderFolder)-1]='\0';
 dispText = ASTextFromScriptText(PDFBinderFolder, kASEUnicodeScript);
#endif
 ASFileSysReleasePath(fileSys, thePath);
 // Otherwise, the hard coded file path will be used.
 else {
 strcpy(PDFBinderFolder, STRING_PDFBinderFolder);
 dispText = ASTextFromScriptText(PDFBinderFolder, kASRomanScript);
 // instruction message
 char strMsg[MAX_STRING_LENGTH] = "";
 sprintf(strMsg, "This function will convert and process Tiff and PDF files in the selected directory. ");
 strcat(strMsg, " You need to copy your files in C:\\Fairfax\\Adobe\\in directory." );
 strcat(strMsg, " Files will be processed into C:\\Fairfax\\Adobe\\PDFA directory." );
 strcat(strMsg, " If you are ready, click OK to continue, or click Cancel to quit. " );
 strcat(strMsg, " \nNote you can press down Shift key and click the menu item to have a folder selection. " );
 strcat(strMsg, " \nNote you can turn off the echo message by setting bEcho = false and rebuild the code. " );
 if(ASBoolToBool(bEcho)==true){
 ASInt32 choice = AVAlert(ALERT_CAUTION, strMsg, "OK", "Cancel", NULL, true);
 if(choice==2) {
 return;
 // create a new target pdf file with one empty page
 PDDoc TargetPDF = PDDocCreate();
 ASFixedRect mediaBox = { fixedZero, ASInt32ToFixed(792), ASInt32ToFixed(612), fixedZero };
 PDPage emptyPage = PDDocCreatePage (TargetPDF, PDBeforeFirstPage, mediaBox);
 PDPageRelease (emptyPage);
 // get available headlers and set our file filter
 char ValidExt[MAX_STRING_LENGTH];
 memset(ValidExt, 0, MAX_STRING_LENGTH);
#ifdef SHOW_TOPDF_HANDLER_TYPES
 // enumerate AVConversioToPDF handlers to get all available file
 // types which can be converted to PDF.
 AVConversionEnumToPDFConverters(MyAVConversionToPDFEnumProc, (AVConversionEnumProcData) ValidExt);
 //AVAlertNote("Converters Defined");
 //AVAlertNote(ValidExt);
 //AVAlertNote(gPDFBinderFileFilter);
#endif
#ifdef USE_FILE_FILTER
 // set File filter
 strcpy(ValidExt, gPDFBinderFileFilter);
 //AVAlertNote(ValidExt);
#endif
 // process all files in the directory
 int iNumFiles = 0;
 int iNumFilesConverted = 0;
 char* Done = "Converted";
 char* NotDone = " - ";
 char fileName[MAX_FILENAME_LENGTH+1];
 ASFileSysItemPropsRec props;
 ASFolderIterator iter;
 ASPathName aspItem = NULL;
 memset(&props, 0, sizeof(props));
 props.size = sizeof(props);
 //AVAlertNote("Props Defined");
 ASPathName theFolder = NULL;
 ASFileSys fileSys = NULL;
 DURING
#ifdef WIN_PLATFORM
 fileSys = ASGetDefaultFileSysForPath(ASAtomFromString("ASTextPath"), dispText);
 theFolder = ASFileSysCreatePathName (fileSys, ASAtomFromString("ASTextPath"), dispText, 0);
 //AVAlertNote("FileSys and Folder Defined");
#else
 fileSys = ASGetDefaultFileSysForPath(ASAtomFromString("POSIXPath"), PDFBinderFolder);
 theFolder = ASFileSysCreatePathName (fileSys,
 ASAtomFromString("POSIXPath"), PDFBinderFolder, 0);
#endif
 if (theFolder==NULL) {
 //AVAlertNote("Fail to create ASPathName for the selected folder.");
 E_RTRN_VOID
 // Find first file in current directory
 if((iter = ASFileSysFirstFolderItem(fileSys, theFolder, &props, &aspItem))==FALSE) {
 //AVAlertNote("This is either an invalid folder or the folder contains no files.");
 E_RTRN_VOID
 ASFileSysReleasePath(fileSys, theFolder);
 //AVAlertNote("Folder Released");
 // get filename only
 if(ASFileSysGetNameFromPath(fileSys, aspItem, fileName, sizeof(fileName))) {
 E_RTRN_VOID
 HANDLER
 // exception handling
 char errorMsg[256];
 ASGetErrorString (ASGetExceptionErrorCode(), errorMsg, 256);
 if(aspItem!=NULL) ASFileSysReleasePath(fileSys, aspItem);
 if(theFolder!=NULL) ASFileSysReleasePath(fileSys, theFolder);
 // display an error message.
 if(ASBoolToBool(bEcho)==true) {
 AVAlertNote (errorMsg);
 return;
 END_HANDLER
 //AVAlertNote(fileName);
 // go to binding if it's a valid type of file
 if(props.type == kASFileSysFile && PassPDFBinderFileFilter(fileName)) {
 char outFileName[] = "";
 //strcat(outFileName, STRING_PDFOutputFolder);
 //strcat(outFileName, FOLDERSYMBOL);
 //strcat(outFileName, fileName);
 strcat(outFileName, STRING_PDFOutputFolder);
 strcat(outFileName, FOLDERSYMBOL);
 strcat(outFileName, fileName);
 //AVAlertNote(outFileName);
 ASPathName outputFileName = ASFileSysCreatePathName (ASGetDefaultFileSys(), ASAtomFromString("Cstring"), outFileName, 0);
 BindingFileToPDF(aspItem, fileName, props, TargetPDF, outputFileName ,&iNumFiles, &iNumFilesConverted);
 //AVAlertNote("File Processed");
 ASFileSysReleasePath(fileSys, aspItem);
 // process all other files
 while(ASFileSysNextFolderItem(fileSys, iter, &props, &aspItem)) {
 // get filename only
 if(ASFileSysGetNameFromPath(fileSys, aspItem, fileName, sizeof(fileName))) {
 return;
 // go to binding if it's a valid type of file
 if(props.type == kASFileSysFile && PassPDFBinderFileFilter(fileName)) {
 char outFileName[] = "";
 //strcat(outFileName, STRING_PDFOutputFolder);
 //strcat(outFileName, FOLDERSYMBOL);
 //strcat(outFileName, fileName);
 strcat(outFileName, STRING_PDFOutputFolder);
 strcat(outFileName, FOLDERSYMBOL);
 strcat(outFileName, fileName);
 //AVAlertNote(outFileName);
 ASPathName outputFileName = ASFileSysCreatePathName (ASGetDefaultFileSys(), ASAtomFromString("Cstring"), outFileName, 0);
 BindingFileToPDF(aspItem, fileName, props, TargetPDF, outputFileName, &iNumFiles, &iNumFilesConverted);
 //AVAlertNote("File Processed");
 ASFileSysReleasePath(fileSys, aspItem);
 ASPathName pdfPathName = NULL;
 DURING
 // close the findfile
 ASFileSysDestroyFolderIterator(fileSys, iter);
 // save and close the output pdf file
 // create path
 ASText pathText = ASTextNew();
 ASTextCatMany(
 pathText,
 dispText,
 ASTextFromScriptText(FOLDERSYMBOL, kASRomanScript),
 ASTextFromScriptText(OutputPdfFileName, kASRomanScript),
 NULL);
#ifdef WIN_PLATFORM
 ASFileSys fileSys = ASGetDefaultFileSysForPath(ASAtomFromString("ASTextPath"), pathText);
 pdfPathName = ASFileSysCreatePathName (fileSys,
 ASAtomFromString("ASTextPath"), pathText, 0);
#else
 char path[MAX_STRING_LENGTH];
 strncpy(path, ASTextGetEncoded(pathText,
 ASTextGetBestEncoding(pathText, (ASHostEncoding)PDGetHostEncoding())), MAX_STRING_LENGTH - 1);
 ASFileSys fileSys = ASGetDefaultFileSysForPath(ASAtomFromString("POSIXPath"), path);
 pdfPathName = ASFileSysCreatePathName (fileSys,
 ASAtomFromString("POSIXPath"), path, 0);
#endif
 if(pdfPathName==NULL) {
 E_RTRN_VOID
 // delete the empty page
 if(PDDocGetNumPages(TargetPDF)>1) {
 PDDocDeletePages (TargetPDF, 0,0,NULL, NULL);
 // save
 //PDDocSave (TargetPDF, PDSaveFull | PDSaveCollectGarbage | PDSaveLinearized,
 // pdfPathName, ASGetDefaultUnicodeFileSys(), NULL, NULL);
 PDDocClose (TargetPDF);
 //ASFileSysReleasePath(fileSys, pdfPathName);
 HANDLER
 // exception handling
 char errorMsg[256];
 ASGetErrorString (ASGetExceptionErrorCode(), errorMsg, 256);
 if(pdfPathName!=NULL) ASFileSysReleasePath(fileSys, pdfPathName);
 // display an error message.
 if(ASBoolToBool(bEcho)==true) {
 AVAlertNote (errorMsg);
 return;
 END_HANDLER
 // use this line to show the massage on screen if you need
 //if(ASBoolToBool(bEcho)==true) {
 AVAlertNote ("Folder Completed. PDF/A Output files generated.");
 return;
/* ConvertAndInsertFileToPDF
/** Internal function \n
** Convert a file to PDF, then insert it to target PDF file.
** @param aFileName IN char string, filename.
** @param PDFfile IN/OUT PDDoc of the target PDF file.
** @return 0 if OK, 1 if failed.
int ConvertAndInsertFileToPDF(ASPathName aPathName, char* aFileName, PDDoc PDFfile)
 PDDoc tempPDF;
 char* Ext;
 DURING
 // get file extention
 Ext = strrchr(aFileName,'.');
 if(Ext) {
 Ext++;
 else {
 E_RETURN (1);
 // if the file is PDF, open PDDoc
 if(strcmp(Ext,"PDF")==0 || strcmp(Ext,"pdf")==0) {
 tempPDF = PDDocOpen (aPathName, ASGetDefaultFileSys(), NULL, true);
 if(tempPDF==NULL) {
 PDDocClose(tempPDF);
 E_RETURN (1);
 // else convert it to PDF
 else
 // let it automatically find right handler for the file and do the job.
 AVConversionStatus stat = AVConversionConvertToPDF
 (kAVConversionAsyncOkay, //kAVConversionNoFlags
 aPathName, ASGetDefaultFileSys(), &tempPDF, NULL);
 // check if successful
 if(stat != kAVConversionSuccess) {
 //AVAlertNote("Cannot convert the file.");
 E_RETURN (1);
 HANDLER
 // exception handling
 char errorMsg[256];
 ASGetErrorString (ASGetExceptionErrorCode(), errorMsg, 256);
 // display an error message.
 if(ASBoolToBool(bEcho) == true) {
 AVAlertNote (errorMsg);
 return 1;
 END_HANDLER
 // insert new PDF into target PDF
 DURING
 // insert all pages of new pdfc to TargetPDFfile.
 PDDocInsertPages(PDFfile, PDLastPage, tempPDF, 0,
 PDAllPages, PDInsertAll, NULL, NULL, NULL, NULL);
 PDDocClose(tempPDF);
 HANDLER
 char errorMsg[256];
 ASGetErrorString (ASGetExceptionErrorCode(), errorMsg, 256);
 if(ASBoolToBool(bEcho)==true) {
 AVAlertNote(errorMsg);
 END_HANDLER
 if(strcmp(Ext,"doc")==0) {
 char fname[40];
 sprintf(fname,"%s.pdf",aFileName);
 remove(fname);
 return 0;
/* MyAVConversionToPDFEnumProc
/** Internal callback function \n
** called for every AVConversionToPDFHandler.
** get the valid type (file extention) for the conversion.
** @return true.
ACCB1 ASBool ACCB2 MyAVConversionToPDFEnumProc(AVConversionToPDFHandler handler,
 AVConversionEnumProcData data)
 ASUns16 numFileExt = handler->convFilter.numFileDescs;
 for (int i = 0; i < numFileExt; i++) {
 char* ext = handler->convFilter.fileDescs[i].extension;
 if(strlen(ext)>0) {
 strcat((char*) data, ext);
 strcat((char*) data, ",");
 return true;
/* this is alternative code to get right conversion handler for a specific file
 to be converted. It works with function AVConversionConvertToPDFWithHandler.
 It's not used now, but kept for user's reference.
ACCB1 ASBool ACCB2 AVConversionToPDFEnumFindHandler(AVConversionToPDFHandler handler,
 AVConversionEnumProcData data)
 ASUns16 numFileExt = handler->convFilter.numFileDescs;
 for ( int i = 0; i < numFileExt; i++)
 char* ext = handler->convFilter.fileDescs[i].extension;
 if(strlen(ext)) {
 if(!strcmp((char*) data, ext)) {
 gHandler = handler;
 return false;
 return true;
/* BindingFileToPDF
/** Internal callback function for binding process \n
** IN: char* aFilename, ASFileSysItemPropsRec nFileAttrb \n
** PDDoc targetPDdDoc, int *ipTotal, \n
** int *ipConverted, FILE *logfile \n
** OUT: int *ipTotal, int *ipConverted. \n
void BindingFileToPDF(ASPathName aPathName, char* aFilename, ASFileSysItemPropsRec nFileAttrb, PDDoc targetPDdDoc, ASPathName outputPathName, int *ipTotal, int *ipConverted)
 // ignore system, hidden files, and our target PDF and log file.
 if( nFileAttrb.isHidden
 || (strcmp(aFilename,".")==0) || (strcmp(aFilename,".." )==0)
 || (strcmp(aFilename,OutputPdfFileName)==0) || (strcmp(aFilename,LogFileName)==0)) {
 return;
 (*ipTotal)++;
 char msg[MAX_STRING_LENGTH] = "";
 char* Done = "Converted";
 char* NotDone = " - ";
 // try to convert and insert it to target PDF file.
 // rc would be 0 for success, otherwise 1.
 int rc = ConvertAndSavePDFInTargetFolder(aPathName, aFilename, targetPDdDoc, outputPathName);
 // if converted
 if(rc==0) {
 (*ipConverted)++;
/* PassPDFBinderFileFilter
/** Internal callback function for binding process
** @return true if the IN aFilename is a valid file for PDF conversion,
** otherwise false.
ASBool PassPDFBinderFileFilter(char* aFilename)
#ifdef USE_FILE_FILTER
 // if the filter is empty, any file will pass.
 if(strlen(gPDFBinderFileFilter)==0)
 return true;
 char* Ext = strrchr(aFilename,'.');
 if(Ext!=NULL) {
 Ext++;
 if(strstr(gPDFBinderFileFilter, Ext)) {
 return true;
 return false;
#else
 // not use filter, any file will pass.
 return true;
#endif
/* ConvertAndInsertFileToPDF
/** Internal function \n
** Convert a file to PDF, then insert it to target PDF file.
** @param aFileName IN char string, filename.
** @param PDFfile IN/OUT PDDoc of the target PDF file.
** @return 0 if OK, 1 if failed.
int ConvertAndSavePDFInTargetFolder(ASPathName aPathName, char* aFileName, PDDoc PDFfile, ASPathName outputPathName)
 PDDoc tempPDF;
 char* Ext;
 DURING
 // get file extention
 Ext = strrchr(aFileName,'.');
 if(Ext) {
 Ext++;
 else {
 E_RETURN (1);
 // if the file is PDF, open PDDoc
 if(strcmp(Ext,"PDF")==0 || strcmp(Ext,"pdf")==0) {
 tempPDF = PDDocOpen (aPathName, ASGetDefaultFileSys(), NULL, true);
 if(tempPDF==NULL) {
 PDDocClose(tempPDF);
 E_RETURN (1);
 // else convert it to PDF
 else
 // let it automatically find right handler for the file and do the job.
 AVConversionStatus stat = AVConversionConvertToPDF
 (kAVConversionAsyncOkay, //kAVConversionNoFlags
 aPathName, ASGetDefaultFileSys(), &tempPDF, NULL);
 // check if successful
 if(stat != kAVConversionSuccess) {
 //AVAlertNote("Cannot convert the file.");
 E_RETURN (1);
 else {
 //change Extension
 ASText asTmp = ASTextNew();
 ASFileSysDisplayASTextFromPath(ASGetDefaultUnicodeFileSys(), outputPathName, asTmp);
 //AVAlertNote(ASTextGetScriptText(asTmp, kASRomanScript));
 if(strcmp(Ext,"TIF")==0 || strcmp(Ext,"tif")==0){
 ASTextReplace(asTmp, ASTextFromScriptText(".tif", kASRomanScript), ASTextFromScriptText(".pdf", kASRomanScript));
 } else {
 ASTextReplace(asTmp, ASTextFromScriptText(".tiff", kASRomanScript), ASTextFromScriptText(".pdf", kASRomanScript));
 //AVAlertNote(ASTextGetScriptText(asTmp, kASRomanScript));
 outputPathName = ASFileSysCreatePathName (ASGetDefaultUnicodeFileSys(), ASAtomFromString("ASTextPath"), asTmp, 0);
 HANDLER
 // exception handling
 char errorMsg[256];
 ASGetErrorString (ASGetExceptionErrorCode(), errorMsg, 256);
 // display an error message.
 if(ASBoolToBool(bEcho) == true) {
 AVAlertNote (errorMsg);
 return 1;
 END_HANDLER
 // Run OCR and Save new PDF into target PDF
 DURING
 // OCR
 ASAtom cmdName;
 AVCommand cmd;
 cmdName=ASAtomFromString("PaperCapture");
 cmd=AVCommandNew(cmdName);
 ASCab config = ASCabNew();
 ASCabPutInt (config, "UIPolicy", kAVCommandUISilent); //hide the interface
 if (kAVCommandReady == AVCommandSetConfig (cmd, config)) {
 //AVAlertNote("Config Ready");
 ASCab inputs = ASCabNew();
 ASCabPutPointer (inputs, kAVCommandKeyPDDoc, PDDoc, tempPDF, NULL);
 if (kAVCommandReady == AVCommandSetInputs (cmd, inputs)) {
 //AVAlertNote("Input Ready");
 ASCabDestroy (inputs);
 AVCommandStatus status = AVCommandExecute(cmd);
 //switch (status) {
 // case kAVCommandReady :
 // AVAlertNote("Not working, but ready to work.");
 // break;
 // case kAVCommandWorking :
 // AVAlertNote("Still working");
 // break;
 // case kAVCommandDone :
 // AVAlertNote("Done working");
 // break;
 // case kAVCommandInError :
 // AVAlertNote("In Error");
 // break;
 // case kAVCommandNotExecuted :
 // AVAlertNote("Command not executed due to lack of objects on which the command to be executed");
 // break;
 AVCommandDestroy(cmd);
 //Save
 //PDDocSave (tempPDF, PDSaveFull | PDSaveCollectGarbage | PDSaveLinearized, outputPathName, ASGetDefaultUnicodeFileSys(), NULL, NULL);
 //ClosePDF
 //PDDocClose(tempPDF);
 //Convert to PDF/A Compliance
 //Select the right handler
 AVConversionEnumFromPDFConverters(myAVConversionFromPDFEnumProc, NULL);
 // do conversion
 AVConversionStatus stat = AVConversionConvertFromPDFWithHandler(RightHandler, NULL, kAVConversionAsyncOkay, tempPDF, outputPathName, ASGetDefaultFileSys(), NULL);
 // check the returned status and show message
 //if (stat == kAVConversionSuccess)
 // AVAlertNote( "The PDF/A file was saved in output folder." );
 //else if (stat == kAVConversionFailed)
 // AVAlertNote( "The PDF/A conversion failed." );
 //else if (stat == kAVConversionSuccessAsync)
 // AVAlertNote( "The conversion will continue asynchronously." );
 //else if (stat == kAVConversionCancelled)
 // AVAlertNote( "The conversion was cancelled." );
 //Save
 //PDDocSave (tempPDF, PDSaveFull | PDSaveCollectGarbage | PDSaveLinearized, outputPathName, ASGetDefaultUnicodeFileSys(), NULL, NULL);
 //ClosePDF
 PDDocClose(tempPDF);
 ASFileSysReleasePath(ASGetDefaultFileSys(), outputPathName);
 HANDLER
 char errorMsg[256];
 ASGetErrorString (ASGetExceptionErrorCode(), errorMsg, 256);
 if(ASBoolToBool(bEcho)==true) {
 AVAlertNote(errorMsg);
 END_HANDLER
 if(strcmp(Ext,"doc")==0) {
 char fname[40];
 sprintf(fname,"%s.pdf",aFileName);
 remove(fname);
 return 0;
//Select the appropiate handler for the PDF/A conversion
static ACCB1 ASBool ACCB2 myAVConversionFromPDFEnumProc(AVConversionFromPDFHandler handler, AVConversionEnumProcData data)
 AVFileFilterRec filter = handler->convFilter;
 ASUns16 numFileExt = filter.numFileDescs;
 char *kUniqueID = handler->uniqueID;
 // go through the conversion handlers to find a handler for PDF extension files and the unique key matches the PDF/A one.
 for (ASInt32 i = 0; i < numFileExt; i++)
 if (strlen(handler->convFilter.fileDescs[i].extension)>0)
 // found it, fill in the handler and return false to stop going on.
 if (!strcmp(handler->convFilter.fileDescs[i].extension, "pdf") && !strcmp(kUniqueID,"com.callas.preflight.pdfa")) {
 RightHandler = handler;
 return false ;
 return true;

There are some options for various APIs to run "kinda silent" - but again, Acrobat is designed for INTERACTIVE use…so "completely silent" isn't really an option.
As for speed – you'd need to be MUCH MORE specific about where your slow downs are. Have you profiled?
From: Adobe Forums <[email protected]<mailto:[email protected]>>
Reply-To: "[email protected]<mailto:[email protected]>" <[email protected]<mailto:[email protected]>>
Date: Mon, 12 Dec 2011 07:39:08 -0800
To: Leonard Rosenthol <[email protected]<mailto:[email protected]>>
Subject: Slow processing and getting opening errors/warnings
Re: Slow processing and getting opening errors/warnings
created by FFX-ER<http://forums.adobe.com/people/FFX-ER> in Acrobat SDK - View the full discussion<http://forums.adobe.com/message/4079175#4079175

Trying to install iTunes and get this error: "The installer encountered errors before iTunes could be configured   Errors occurred during installation. Your system has not been modified"

HELP!!!
I am trying to install iTunes on my Windows 7 laptop and get this error:
"The installer encountered errors before iTunes could be configured   Errors occurred during installation. Your system has not been modified"
Arghhhhh!! I've tried different browsers and various other things suggested on other posts to no avail

Ok people, I think I have found the solution !
If you click on the start button from your desktop screen.
Then in the "search programs and files" field type : apple software update - you can find the apple installer.
Click on the apple software update line and let the machine run it's course. I recommend updating whatever it wants to , ie: safari 5, quicktime, itunes....
I then restarted my computer and it seems to be working now !
Good luck everyone !

I tried to reinstall iCal from Disk and get an error

I deleted info.plist from my iCal package. I had read somewhere that if I deleted that all old files in my iCal would be deleted. But instead what happened is I get an error when I try to start "2008-05-19 15:29:46.693 iCal[9051:10b] No Info.plist file in application bundle or no NSPrincipalClass in the Info.plist file, exiting logout" So then I tried to reinstall iCal from Disk and get the error "The Installer could not validate the contents of the 'iCal' package. Contact the software manufacturer for assistance"

lizesc,
Welcome back to Apple Discussions.
I deleted info.plist from my iCal package.
Just for the edification of other users, you should never alter any files inside of an application package.
Drag your current copy of iCal to the trash, and then follow these steps to reinstall iCal:
1. Insert your Leopard Installation disk into the computer.
2. The disk will appear on your desktop.
3. Double click on the "Optional Installs" folder.
4. Double click on the "Optional Installs.mpkg."
5. Click on (Continue) in Introduction.
6. Click on (Continue) in Software License Agreement.
7. Click on (Agree) to agree to the terms of the software license agreement.
8. Click on the disclosure arrow ▶ next to Applications.
9. Select (✓) iCal.
10. Click (Continue).
11. After iCal has been reinstalled, download and install the OS X 10.5.2 Combo Update.
;~)

Export tables, sequence, and package question

Hi all,
I've export table like: exp username/password file=export.dmp log=export.log tables=A statistics=none.
The export statement above just export only the table "A" structure not the table "A" data. So, how can I move all the data from table "A" to table "B".
How do I export the sequence, and package and its data also?
Thank you very much
Kevin

Can you create a DBlink in order to do the insert into B select * from A.
Also, you can use the SQL*Plus Copy command.
Here are some links for COPY command:
 Copying Data
 copy command
 copy command vs sql*loader
 
Here is a link for moving code:
 exporting packages,function etc. from one user to another.

HT2493 I just updated itune and getting an error mscvr80,dll missing. I uninstall and reinstall and getting the same message. help

I just updated itune and getting an error mscvr80,dll missing. I uninstall and reinstall and getting the same message. help

DLL files typically do not affect Mac OS X systems. Are you sure you are running Mac OS X? If you are running some version of iTunes Windows, the forum for that is here:
https://discussions.apple.com/community/itunes/itunes_for_windows

Exporting a sequence and getting an Error file too big message

Similar Messages

Maybe you are looking for