Artefacts in 2d (icons and bar)
Hi,
my graphics is after some time always messed up. Does anybody know what causes it? See top of the screenshot and the icons on the left side.
http://petr.kozisek.googlepages.com/scr … ;init:.jpg
Thank you for your help
my xorg.conf
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "USB mouse" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
RgbPath "/usr/share/X11/rgb"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
#Load "GLcore"
Load "extmod"
#Load "glx"
Load "record"
#Load "dri"
Load "dbe"
Load "xtrap"
Load "freetype"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "us,cz(qwerty)"
Option "XkbOptions" "grp:shifts_toggle"
EndSection
Section "InputDevice"
Identifier "USB Mouse"
Option "Name" "Microsoft Microsoft 5-Button Mouse with IntelliEye(TM)"
Driver "mouse"
Option "Device" "/dev/input/mice"
Option "SendCoreEvents" "true"
Option "Protocol" "ExplorerPS/2"
Option "ZAxisMapping" "4 5"
Option "Buttons" "7"
Option "ButtonMapping" "1 2 3 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
HorizSync 30.0 - 100.0
VertRefresh 50.0 - 75.0
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "NoAccel" # [<bool>]
#Option "SWcursor" # [<bool>]
#Option "ColorKey" # <i>
#Option "CacheLines" # <i>
#Option "Dac6Bit" # [<bool>]
#Option "DRI" # [<bool>]
#Option "NoDDC" # [<bool>]
#Option "ShowCache" # [<bool>]
#Option "XvMCSurfaces" # <i>
#Option "PageFlip" # [<bool>]
Identifier "Card0"
Driver "intel"
VendorName "Intel Corporation"
BoardName "82830 CGC [Chipset Graphics Controller]"
BusID "PCI:0:2:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Last edited by mohican (2008-07-13 08:28:18)
Pl do not post duplicates - Change the appearance of the default icons and bar in iStore
Similar Messages
-
Change the appearance of the default icons and bar in iStore
We have a requirement to change the default icons and the bar of iStore. Is this possible? I have attached the screenshots here - http://www.overpic.net/viewer.php?file=xwho42d6dwuz4pkq96fo.jpg
Thanks in advance.Pl do not post duplicates - Change the appearance of the default icons and bar in iStore
-
My Mac book won't turn on. All I get is the apple logo and a loading icon and bar, then it just shuts down. What do I do?
What OS are your running?
Mavericks 10.9.4 boot into recovery and run the DiskUtility >Repair Disk
Recovery http://support.apple.com/kb/HT4718 -
Strange things happened since my mbp 13' (MD-101) was upgraded to 10.8.4 ----------- time icon, battery icon,and language icon (these icons can be moved when held Command key and drag) cannot be loaded on startup, but they still can be loaded when you get into System Preferences and manually turn them on, as well as iStat Menus
However, some other icons didn't bother, things like BetterTouchTool, NewsBar. They are immovable!! I guess it is the key factor that the icon is movable or not making the difference.
Someone please lend me a helping hand?
I've attached some pictures in order to make my situation easier to be understood.
these icons can't be loaded on my loggin in.
but they can be loaded manually
however, these icons will be loaded on startup
I've almost despaired to resolve it . Thanks for your help!I have a similar issue. When the computer goes into "Hibernate" mode -- that is, it loses power while sleeping and it writes the contents of it's memory to disk in order to boot into that exact configuration when woken up -- many of my icons when Apple-Tab'ing to another application appear as static. They look like a slightly colorized version of the "static snow" you see when tuning into a station that doesn't exist on a UHF antenna television. Also, icons in Chrome such as web sites "favorite icons" or favicon.ico (the icons that appear in the URL bar and bookmarks) will be scrambled in the same fashion , at first , until the actual icon is loaded.
Between this, my menu bar and finder icons not displaying, and being unable to boot into safe mode, I'm getting quite ******. I have no idea what the **** is going on with my Macbook Pro. The issue of the scrambled icons actually existed prior to installing an SSD and doing a fresh install of Mountain Lion. I may end up throwing in the towl and re-installing the operating system but I'm sure SOMETHING will happen. It seems the latest update, 10.8.2, is absolute garbage.
What the ****, Apple? And I really don't want to take the computer to the morons at the Apple Store. They are not "geniuses" by any measure. -
my phone will not load past the apple icon when trying to turn on. all it has on the screan is apple icon and a blank status bar. whats wrong? and what can i do?
Hi, Just put phone in the recovery mode and restore to the factory settings. It should work.
-
After upgrading to Lion, Preview (5.2.2) appears to have lost the facility to run a slide show by using my mouse to click an icon in the visible menu bar, as I could in the previous version. Can I retrieve that icon and thus that facility?
Unfortunately not. Lion has made many adjustments to the previous system. Try opening your pdfs in keynote.
-
My Iphone 4s just stopped during the latest update and now the screen show the Apple icon and an white bar beneath. I can no longer get anything to work on the phone!! Where to from here??
You can not merge accounts.
Apps are tied to the Apple ID used to download them, you can not transfer them. -
When i plug in my ipad to charge its just coming up with a red bar in the recharge icon and not charging.... what does this mean and how can it be fixed... checked all cables, not broken
First make sure you are using the charger that came with the iPad and plug that into a good wall outlet. When the iPad battery is completely drained it may take some time on the charger before the iPad responds. Be patient and let the iPad remain on the charger for at least an hour then reset your device. Press and hold the Home and Sleep buttons simultaneously until the Apple logo appears. Let go of the buttons and let the device restart. If the iPad restarts let it continue to charge until the battery is at 100%. If the iPad does not restart Make an appointment at an Apple Store to have your device examined by a technician. Or contact Apple Support.
-
Yet another dzen2 bar, icon and clickable tags for DWM
I just switched to dwm and it's really awsome so I customized it a bit: A script to display dzen2 on top of dwm status bar which show:
tags
icons
and these tags are really clickable,
and even highlight the active tags.
It's quite simple though and lots of people would do better works but I really like it and wanna share it here.
Here is some screenshots:
http://img135.imageshack.us/img135/8758/39852191.png
By linktohack at 2011-02-22
http://img64.imageshack.us/img64/8761/63162414.png
By linktohack at 2011-02-22
Usage:
Download script from here:
https://github.com/linktohack/dztags-gen
Make a directory dwm resouces eg: ~/.dwm
Download XBM ICON PACK from here:
http://dzen.geekmode.org/wiki/wiki.cgi/ … nIconPacks
and extract it to a directory inside the above directory, eg: ~/.dwm/xbm8x8/
Customize the script if needed (Tags name, icon prefix, color...)
Run setup command, eg:
dztags-gen --setup ~/.dwm
|_ no trailling slash
And finally run dztags script to show dzen2 bar, eg:
~/.dwm/dztags &
[link@Link-Arch ~]$ ./dztags-gen/dztags-gen --help
dztags-gen
Script to generate dztags and dztagsrsc
dztags: Infinite loop script show dzen2-svn from dztagsrc
Usage:
Dayly use: (through dztags)
dztags-gen number /path/to/dztagsrc
OR
First time:
dztags-gen --setup /path/to/dztags/dir
|_ no trailling slash
After setup, just run /path/to/dztags/dir/dztags &
I will appriciate any feedback here.
Thanks you all!
Link,Thanks @jasonwryan, I just don't know where to post it
-
since latest update it tried to run and recieved error. Rebooted and it gets stuck on Apple icon and appears as though the progress bar trying to load but it just hangs there. Can't do anything????
HELPI went to the Apple store, the salesman held the power button andthe main button down for five seconds or so, and it came back to life. The ironic thing is that I already tried that before going....Anyway, the iPod went into recovery mode, where I had to basically plug it back into iTunes, confirm the new update was downloaded properly, and then I had to wipe it clean in recovery ( or whatever you call it). I put all my music back on it and now it works fine......good luck
-
I had multiple copies of the library and i tried to move 1 to trash and now i have broken icon and my mac won't boot up any more can i fix this from home or do I need to go to the genius bar?
Go to the genius bar. You've mucked up your MBP OS and it requires a hands on repair.
-
Why do I get a permanent wait icon and Basic C notice on the task bar on my XP when I burn disks using iTunes? How do I get rid of the wait icon when I leave iTunes?
Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (Later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
See also HT1925: Removing and Reinstalling iTunes for Windows XP or HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
Should you get the error iTunes.exe - Entry Point Not Found after the above reinstall then copy QTMovieWin.dll from:
C:\Program Files (x86)\Common Files\Apple\Apple Application Support
and paste into:
C:\Program Files (x86)\iTunes
The above paths would be for a 64-bit machine. Hopefully the same fix with the " (x86)" omitted would work on 32-bit systems with the same error.
tt2 -
iOS 6 update has done something to the YouTube icon and now I can't see videos when following the new link in the bookmark bar. Flash player required message appears and there is a black bar when scrolling.
YouTube is not now part of iOS 6. However, you can download the YouTube app at http://itunes.apple.com/app/youtube/id544007664.
See this similar post https://discussions.apple.com/thread/4335468?tstart=30
Cheers, Tom -
HT4623 My iphone is frozen with the apple icon and progress bar at 5% cannot update
My iphone4 is frozen with the apple icon and progress bar at 5% cannot update
Same issues here.
iPhone 5 was fine until I restarted the device... now the screen flickers on and off (with the white Apple logo
and frozen progress bar overlayed on the screen).
When I try to restore, I get a "-1" error.
Well I just looked over at the screen, and everything is now fine. No flickering, no logo... the screen looks normal.
Hmmm... -
Hi.. IOS 6..1.1 is downloaded in my ipad 3.. then i clicked to install. ipad restarted with an apple icon and a status bar. but there is no update for almost 2 hours. please let me know how to proceed further
Hold down on the home and power buttons at the same time until the iPad shuts down and the Apple logo appears again.
You might need to connect to a PC running iTunes to restore if the update got corrupted and can't complete
Maybe you are looking for
-
Connecting a vga monitor to mini displayport with 2 adapters
Hi. I have a 21.5 inch iMac and I want to attach a second monitor. The monitor that I bought, the MultiSync LCD1560m, says it is mac compatible. it has two inputs; one DVI-D and one VGA. The monitor came with a vga cable, but not a DVI-D cable. I bou
-
No Sound on Custom Playlist iPhoto
OS X-10-6-8 iPhoto '11 iTunes 10-5-3 (3) Custom Playlist does not work on my iPhoto'11. I downloaded iTunes music for my slide show but it doesn't play with the slide show. It plays in the various source playlists Themes/Music/Settings box with the
-
Block access to printing part or take printer off Mac's list of nearby printers
Our office manager recently purchased a LaserJet printer and has requested that we use that printer instead of the OfficeJet printer when we wish to print something. Because of this, I want to make the OfficeJet unavailable for printing from any dev
-
Maximum number of signatures?
Is there a maximum number of signatures allowed in Mail? I seem to only be able to access the first 255. Mail allows me to add more signatures but I can't access them from a mail message in the dropdown menu.
-
Adobe form on SAP NetWeaver 7.0 ABAP Trial Version SP12
Hello, I want to develop adobe form on SAP NetWeaver 7.0 ABAP Trial Version SP12. I have a message that says ADS is missing. I know also that I need Java Stack. Do you know if it is possible to install this component. If yes where can I find this com