Artikel-Anfangsbestände maschinell einlesen

Hallo zusammen,
kennt ihr eine Möglichkeit Artikel-Anfangsbestände maschinell einzulesen - über Excel bzw. über DTW Vorlage?
Danke und Gruß
Milan

Hi Milan,
Grundsätzlich ist von einem maschinellen Import eher abzuraten.
Bei ein paar Kunden haben wir es dennoch gelöst.
Wir haben am Anfang (SAP B1 noch ohne Bestände) einfach über die DTW einen manuellen Wareneingang mit den jeweiligen Artikelmengen importiert.
Somit hast du automatisch einen Anfangsbestand.
Ich hoffe ich konnte dir weiter helfen.
Bastian

Similar Messages

Artikel nach Provision verkaufen

Hallo zusammen,
ich habe eine Testinstallation aufgesetzt, seid langer Zeit die erste wieder.
B1 8.81 SP 00 PL 04 auf einem W2K8 R2 Server
Mein Kunde der sich für die SAP interessiert verkauft im Auftrag für ausländische Werke und bekommt für die Artikel eine Provision die man je nach Artikel individuell angeben muss.
Kann mir jemand in kurzen Schritten erklären OB und wenn ja wie die B1 einzustellen ist das der Gewinn nach Provision ermittelt wird?
Administration>>> Systeminitialisierung >>> Allgemeine Einstellungen >>> GP = Provision festlegen für "Artikel"
Administration>>>Definition>>>Allgemein>>>Provisionsgruppen "anlegen"
Lagerverwaltung>>>Artikelstammdaten>>>Verkaufsdaten>>>Benutzerdefinierte Provision
oder ist das über entsprechend konfigurierte Preislisten möglich?!?
danke für Eure Hilfe.

Hallo Andreas,
danke für Deine Antwort, Du hasst Recht, ich erklär das mal genauer.
Im Grunde ist es auch so wie Du sagts, das was der Kunde Fakturiert ist das was er vom Lieferanten an Provision bekommt.
Der Kunde ist Handelsvertreter, bekommt von Auftraggeber eine Bestellanfrage, diese wird 1:1 an das Werk geleitet, die Daten zur Statistik gespeichert. (Das Angebot in B1?)
Mein Kunde bestätigt dann nach Erhalt vom Werk, dem Auftraggeber, den Liefertermin und die Artikel, mit dem Preis den der Auftraggeber ans Werk zahlt (Der Kundenauftrag in B1?).
Dann stellt mein Kunde dem Lieferanten seine Rechnung, die sich ergibt aus der Provision, diese kann individuell sein oder aus minimal oder maximal Provision bestehen.( Die Ausgangsrechnung in B1?)
individuelle Provision: x% vom Umarbeitungswert
minimal Provision: (Gewicht in kg / 100) * (35 / 5,33572)
maximal Provision: (Gewicht in kg / 100 * (110 / 6,55957)
Material Provision: (Gewicht in kg / 100) * (70 / 6,55957)
Diese Provisionen sind abhängig vom Lieferanten, da jeder sein eigenen Wert hat, meistens sind es 4%, bei einem Lieferant da ist das so kompliziert mit dem minimal und maximal Provisionen und bei anderen gibt es die Material Provision
Dann muss für ein Lieferanten ein Lager geführt werden, dieser Betreibt ein Lager für Rohre hier in DE, dieses ist Fremdverwaltet durch eine eigene Firma, allerdings werden bei meinem Kunden die Bestände geführt, nicht mehr. Das dient lediglich der Überschaubarkeit der Bestände, abverkaufen muss man die natürlich können. Hier sind 4% Provision vom Umarbeitungswert zu fakturieren.
Meine Gedanken gingen dahin, den Artikel so anzulegen wie er auch Verkauft wird und bei einem Verkauf eine individuelle Provision einzugeben die dann als Umsatz Fakturiert wird.
Das funktioniert aber nicht über den Weg in den Firmeneinstellungen die Provision von Artikeln zu aktivieren und in den Artikelstammdaten unter "Verkaufsdaten" eine Benutzerdefinierte Provision zu hinterlegen diese Provisionen können dann Vertriebsmitarbeitern zugerechnet werden aber nicht dem Firmenumsatz.
Ich werde da nicht schlau draus...
Danke das Du dir Zeit nimmst!!!

Wie kann ich mit dem F-Secure Buddy Gegenstände wiederfinden?

Frage
Wie kann ich mit dem F-Secure Buddy Gegenstände wiederfinden?
Antwort
Sie können nach Ihrem F-Secure Buddy und dem daran befestigten Gegenstand innerhalb der Bluetooth-Reichweite suchen. Diese beträgt normalerweise 10 bis 30 Meter. Der Buddy gibt einen Ton aus und blinkt, wenn Sie den Modus zum Finden des Buddys in der App starten.
So finden Sie den Buddy mithilfe der App:
Öffnen Sie die App und tippen Sie in der Kartenansicht auf das Buddy-Symbol.
Tippen Sie auf Buddy finden.
Bewegen Sie sich umher, um den Buddy zu finden. Der Buddy gibt einen Ton aus, damit Sie ihn leichter finden können.
So finden Sie Ihr Smartphone mithilfe des Buddys:
Halten Sie die Buddy-Taste zwei Sekunden lang gedrückt.
Ihr Telefon gibt einen Ton aus, damit Sie es leichter finden können.
Sie können den Buddy und die App auch so einstellen, dass diese beim Abbrechen der Bluetooth-Verbindung einen Alarm ausgeben. Sie können in der App darüber hinaus festlegen, dass bei einem Verbindungsabbruch die letzte bekannte Position in Ihrem Konto gespeichert werden soll.
Diesen Artikel auf Englisch anzeigen

Hallo totem2000, ich habe dir eine PN geschickt. Ciao rioda

Adobe Encore CS4 unter Windows 7 Problem mit Einlesen von HD Material

Hallo zusammen,
habe seit kurzem Windows 7 Ultimate 64bit auf einem zweiten System und teste CS4. Läuft so weit ganz stabil und bei HD deutlich schneller in der Verarbeitung. Wollte mich dann an das Authoring machen und mit Encore ein Bluray Projekt anlegen. Beim Einlesen des HD Materials getrennt nach m2v und ac3 ist bei 99% einlesen der m2v Datei das System komplett eingefroren und machte einen Kaltstart von nöten. Das habe ich nun dreimal probiert und immer wieder das Gleiche! Bin dann um weiter zukommen wieder auf XP und da gibts keine Probs.
Habe in dem englischen Foren viele Berichte von Probs mit W7 64bit gelesen und insbesonder mit Encore jedoch keinen Lösungsansatz finden können!
Hat hier jemand ähnliche Erfahrung mit Encore unter W7 64????

nAbend,
hast das hier auch schon probiert?
http://forums.adobe.com/thread/400484
Gruß
Christoph

Cannot get NDES working on Server 2012 R2 at all.

I absolutely cannot get this to work. I simply cannot figure out what I am either doing wrong or missing.
Neither site works and in the event log I get the following:
The Network Device Enrollment Service cannot retrieve one of its required certificates (0x80070057).
The Network Device Enrollment Service cannot be started (0x80070057).
It seems like I've read every site on this and tried everything but simply cant make it work. Have not tried on 2008 r2. Below is what I have done if someone can help me I would be grateful.
I tried adding more permissions than needed on local machine certs, templates, and domain level as well
Tried the http://support.microsoft.com/kb/2800975 where you move the ExtensionlessUrlHandler-ISAPI-4.0_64bit below
the static file.
I tried using and not using the use local profile in IIS for the SCEP pool
Both the ndesservice acccount and admin account have full control on everything.
I also tried to leave the default settings in the reg for the templates.
This is the NDES log out put when turned on:
========================================================================
402.534.948: Begin: 7/23/2014 4:01 PM 32.507s
402.539.0: taskhost.exe
402.543.0: GMT - 5.00
2005.220.0: certca.dll: 6.3:9600.16384 retail
2005.220.0: certenroll.dll: 6.3:9600.16384 retail
2004.621.0:<2014/7/23, 16:01:32>: 0x80070005 (WIN32: 5 ERROR_ACCESS_DENIED)
2004.642.0:<2014/7/23, 16:01:32>: 0x80070006 (WIN32: 6 ERROR_INVALID_HANDLE)
402.379.949: End: 7/23/2014 4:01 PM 32.585s
402.534.948: Begin: 7/24/2014 2:31 PM 03.904s
402.539.0: taskhost.exe
402.543.0: GMT - 5.00
2005.220.0: certca.dll: 6.3:9600.16384 retail
2005.220.0: certenroll.dll: 6.3:9600.16384 retail
2004.621.0:<2014/7/24, 14:31:3>: 0x80070005 (WIN32: 5 ERROR_ACCESS_DENIED)
2004.642.0:<2014/7/24, 14:31:6>: 0x80070006 (WIN32: 6 ERROR_INVALID_HANDLE)
402.379.949: End: 7/24/2014 2:31 PM 06.122s
EVENT LOG
HTTP Error 500.0 - Internal Server Error
Detailed Error Information:
Module   IsapiModule
Notification   ExecuteRequestHandler
Handler   ISAPI-dll     Error Code   0x80070057
Requested URL
   http://localhost:80/certsrv/mscep_admin/mscep.dll
Physical Path
   C:\Windows\system32\CertSrv\mscep\mscep.dll
Logon Method   Negotiate
Logon User   FARAWAY\NdesService
INSTALL STEPS
SETUP DOMAIN ACCTS:
Created Domain acct ndesservice (added to ndes server admin group and IIS group)
Created Domain acct ndesadmin (added to Enterprise Admins and ndes server admin group)
Ndes Server Profile Added
-Logged on as ndesservice account so profile is created on ndes server
DOMAIN CA (Server 2008 r2)
-Applied kb2483564 to 2008 r2 domain CA
-Duplicated (Exchange Enrollment Agent (Offline request),Cep Encryption,IPSec (Offline request) templates)
Added ndesservice, ndesadmin, and ndes server with read and enroll on all three
-All three cer copies prefixed with ndes
-Issued Certs
-CA properties (added ndesservice account and ndes machine acct read and request)
-Added ndesservice account to local admin group
Set SPN for ndesservice domain account
-setspn –s http/gimli.faraway.com faraway\NdesService)
NDES SERVER (Server 2012 R2)
Installed NDES under CA Role using ndesadmin account (member of enterprrise admins group)
-Added Request Filtering in IIS (tried with adding and without)
-Added .Net extensability options (tried with adding and without)
Post Deployment on NDES Server
-set creds to configure role services to faraway\ndesadmin
-Set service account to faraway\ndesservice
-Set ca to pippin.faraway.com\farway (it picked this up automatically)
-Entered cert info left keys at defualt of 2048
NDES Server Registry changes
-HKLM\Software\Microsoft\Cryptography\MSCEP (changed templates from default of IPSECIntermediateOffline to NDESIPSECIntermediateOffline
also tried the template name NDESIPSec(Offlinerequest) from the copy
-Added faraway\ndesservice account full control of MSCEP and below
-HKLM\Software\Microsoft\Cryptography\MSCEP\EnforcePassword (change from 1 to 0)
Ndes Server IIS applicattion Pool Identity
-IIS SCEP App pool set Load User profile from false to true
NDES Server Certificates
There were two Certs created when the role was installed in the machines personal store. I dont think I am supposed to do anything here other than add permissions?
-Added ndesservice account and machine account with full control
Both the CA and NDES server have been restarted multiple time. Am I doing this right and missing something in IIS 8.5? I Hope I provided enough info.

Learning a lot lol. Never had to do either IIS tracing or capi logging. Turned it on.
This is the log
Level
Date and Time
Event ID
Task Category
Information
7/25/2014 12:25
81
Verify Trust
Information
7/25/2014 12:25
90
X509 Objects
Information
7/25/2014 12:25
30
Verify Chain Policy
Information
7/25/2014 12:25
11
Build Chain
Information
7/25/2014 12:25
41
Verify Revocation
Information
7/25/2014 12:25
40
Verify Revocation
Information
7/25/2014 12:25
41
Verify Revocation
Information
7/25/2014 12:25
51
Retrieve Object from Cache
Information
7/25/2014 12:25
50
Retrieve Object from Cache
Information
7/25/2014 12:25
40
Verify Revocation
Information
7/25/2014 12:25
10
Build Chain
Information
7/25/2014 12:25
80
Verify Trust
Error
7/25/2014 12:24
30
Verify Chain Policy
Error
7/25/2014 12:24
11
Build Chain
Information
7/25/2014 12:24
90
X509 Objects
Information
7/25/2014 12:24
41
Verify Revocation
Information
7/25/2014 12:24
40
Verify Revocation
Error
7/25/2014 12:24
41
Verify Revocation
Error
7/25/2014 12:24
42
Reject Revocation Information
Error
7/25/2014 12:24
42
Reject Revocation Information
Information
7/25/2014 12:24
51
Retrieve Object from Cache
Information
7/25/2014 12:24
50
Retrieve Object from Cache
Information
7/25/2014 12:24
40
Verify Revocation
Information
7/25/2014 12:24
10
Build Chain
Information
7/25/2014 12:24
70
Acquire Certificate Private Key
Information
7/25/2014 12:24
90
X509 Objects
Error
7/25/2014 12:24
30
Verify Chain Policy
Error
7/25/2014 12:24
11
Build Chain
Information
7/25/2014 12:24
90
X509 Objects
Information
7/25/2014 12:24
41
Verify Revocation
Information
7/25/2014 12:24
40
Verify Revocation
Error
7/25/2014 12:24
41
Verify Revocation
Error
7/25/2014 12:24
53
Retrieve Object from Network
Information
7/25/2014 12:24
52
Retrieve Object from Network
Error
7/25/2014 12:24
42
Reject Revocation Information
Information
7/25/2014 12:24
53
Retrieve Object from Network
Information
7/25/2014 12:24
52
Retrieve Object from Network
Error
7/25/2014 12:24
42
Reject Revocation Information
Information
7/25/2014 12:24
51
Retrieve Object from Cache
Information
7/25/2014 12:24
50
Retrieve Object from Cache
Information
7/25/2014 12:24
40
Verify Revocation
Information
7/25/2014 12:24
10
Build Chain
Information
7/25/2014 12:24
70
Acquire Certificate Private Key
Information
7/25/2014 12:24
90
X509 Objects

CA / NDES Virtual Directory Structure Missing in IIS 7 unable to implement SSL for ADMIN sites

We've recently finiallized both an Enterprice 2008 R2 CA and NDES service installtion configuration. All services are running, to include web enrollment for both. CA sits on a DC, as required, and the NDES roll sits on a standalone machine.
All service generated certificates / templates are in place and or issued including SSL certificates for service web front ends.
I'm trying to take the next step in hardening both of the web front ends by requiring SSL web validation and client SSL authentication.
Problem: When examining the site structures, CA and NDES, within the IIS7 configuration manager the following inconsistancies are present:
     Enterprise CA:
               o No virtual directory is configured or listed under the Certsrv or Enrollment sub-sites, however as previously stated all servies are up and operational.
    2.        NDES:
               o IIS7 configuration manager doesn't list any Certsrv sub-site, but once again all services are up and runniing. I can process SCEP requests via the web.
                   The following 2 items are listed under the default site on the NDES service machine: Rpc and RpcWithCert
                   In past experience I would expect those items to be associated with Exchange, but since NDES is new to me they may be standard.
Not to state the obvious but all Sys32 files and folders are correct as both services are running properly. Can anyone tell me if I've missed some critical article on AD CS or IIS7 that tells me why these 2 conditions are present.
Since the Certsrv sub-site exists on the CA I would assume a normal SSL bind will work, but with critical items missing from within IIS7 (at least from my view) i don't want to compound the problem.. Since there is no Certsrv
structure on the NDES machines I'm not sure what the best way to proceed is. Any help would be greatly appreicated.
V/R BE

CA / NDES all function properly. I'm still reseaching proper IIS 7 SSL implementation, when the virtual directory and sub-site structer is either missing or imcomplete when viewed from within the IIS7 manager.
These services where put into production without a thurough configuration check prior to implementation, so I don't have a test environment setup at the moment to just start playing. I'm thinking this weekend I'm going to have to VSS the current
machines and throw them on the Dev network and see how badly I can break them.
V/R BE

Cisco ISE NDES EAP and HTTP certificates from different CA

Hi guys, hope this is something you can help with…
2 x ISE 1.2 (patch 5) 3415 appliances with hostnames webproxy1.customerdomain.com and webproxy2.customerdomain.com
AD integration with customerdomain.local
Guest authentication (CWA) using a separate interface on the ISE appliance (Gigabit 1) routing into its own VRF for isolation
Corporate authentication is using EAP-TLS which is working fine
BYOD using NSP with SCEP for iPads only at this stage using NDES on <customerdomain.local>
I have installed a signed GlobalSign server certificate for HTTPS for guests (with SAN fields webproxy1.customerdomain.com and webproxy2.customerdomain.com)
I have also installed a signed server certificate from the customer's CA for EAP (with CN of psn.customerdomain.local and SAN fields psn.customerdomain.local , webproxy1.customerdomain.com and webproxy2.customerdomain.com)
The issue I have is if the two certificates are assigned for EAP and HTTP respectively the NSP process fails to generate a certificate though SCEP to the NDES server.
As soon as I use the same internally signed certificate for HTTP and EAP it works, this then causes a problem with the HTTPS certificate being trusted by guests.
This does not work with the GlobalSign certificate being used for both HTTPS and EAP, only the internal one works.
Can you confirm if it is a valid design to have the ISE use one certificate for HTTPS and another for EAP signed by different CAs, it appears it has to be the internal CA used in the SCEP process to work.
Thanks
Andy

I have now tested this with a test HTTP cert signed by a public CA and an EAP cert signed by my internal and SCEP works fine. I am wondering if this is a certificate tier length issue. My working example has a RootCA->IssuingCA->Cert. It fails with a cert with a 3-tier heirarchy RootCA->IntermediateCA->IssuingCA->Cert.
Can anyone confirm this works on other deployments with a 3-tier certificate chain with SCEP?
Thanks

Which identity is ISE meant to place on CSR towards NDES?

Hello,
I'm having an issue with the Proxy SCEP function of ISE. I'm basing my config on the BYOD CVD.
I'm able to enroll an iPAD towards my CA, but when checking the issued certificate Common name or SAN, I can only see the NDES service account username/email on the certificate. According to the consulted documentation I was expecting to have a reference to either the mac address of the device to which the certificate was generated for or towards the username that triggered the enrollment request. None of those appear on the visible fields of the certificate.
Nevertheless while debugging the authentication flow, I do see that the Username is the NDES Service Account, but the RADIUS Username is the actual username of the user that triggered the device enrollment.
Can anybody let me know if this is expected behaviour, and how should the certificate be properly generated, and how to configure either the certificate template to this/ISE?
Thanks
Gustavo Novais

Gustavo,
I assume that the radius username for both certs are different? Does the cert for intenral use the [email protected] format (upn)?
If that is the case the you can create a condition for you authentication rule (under policy elements > conditions) so that the radius username matches @abc.com and then map that to another identity sequence store that uses the attribute you want for internal, but keep your other rule for dot1x users below since this will be more "granular" than your BYOD authentication rule which should point them to the ID sequence you have know.
I set up an example in the lab using the Cert Auth Profile which uses the email attribute, but you can tweak that to your environment.
Attched are the screenshots.
authenticationcondition - creates a filter for the radius username format (you may need to play with this since it doesnt have the "ends with" attribute, I am assuming the "matches" will look for a string pattern)
CAPADInt - creates the certificate auth profile using the attribute in the cert.
AnotherIdenity - sets the sequence so it doesnt break the deployment if users decide to enter their AD credentials using this format also, make sure you sent the condition to continue at the bottom.
MappingtoAuthenRule - is what puts this all together.
Thanks and good luck!!!
Tarik Admani
*Please rate helpful posts*

NDES for MDM and BYOD

Hi,
I have to migrate windows 2003 CA setup to win 2012 set up. I have NDES installed on one of the Sub CA which will be used for Airwatch MDM integration. I have received new request for using NDES for BYOD configuration on CISCo ISE, pls refer to below link:
http://www.cisco.com/c/en/us/support/docs/security/identity-services-engine-software/116068-configure-product-00.html#anc5
This link shows several changes from MDM integration that challenge password need to be disabled, it need server authentication to be enabled in EKU. Also, it will have a separate template which requires full access to service account and that template will
be configured in registry settings.
Please help in identifying whether both of them can be configured simultaneously using same NDES server.
Thanks
Neha Garg

Hi Neha,
Please help in identifying whether both of them can be configured simultaneously using same NDES server.
As the way I see it, disable SCEP Enrollment Challenge Password requirement needs to be done on NDES server, and settings regarding Certificate Template needs to be configured on Certification Authority. Both changes can only be configured on the same server
when Certification Authority and NDES services are collocated on the same server.
Best Regards,
Amy
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Cisco ISE and NDES?

Wanting to use Cisco ICE in front of Windows Server 2012 or R2 NDES. The following article states that NDES should NOT be clustered or load balanced and setting a single password is not supported.
https://social.technet.microsoft.com/wiki/contents/articles/12610.network-device-enrollment-services-ndes-frequently-asked-questions-faq.aspx#Can_I_use_a_Static_Passphrase_across_multiple_NDES_servers_and_then_load_balance_them
The Cisco article says to disable the password altogether and lock the IPs down to the ISE devices in IIS that will access NDES.
http://www.cisco.com/en/US/products/ps11640/products_tech_note09186a0080bff108.shtml
If NDES is configured this way and dedicated to Cisco ISE will this be a supported configuration by Microsoft? If the password is turned off altogether can two NDES servers then be load balanced as the password generation is not an issue.
Thanks

Hi,
Please refer to this article.
CA cluster and NDES
http://blogs.technet.com/b/techniatures/archive/2011/07/07/ca-cluster-and-ndes.aspx
Regards,
Mike
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Trouble enabling NDES logging

Hi,
I am trying to enable logging for Certificate Services Network Device Enrollment Service (NDES). I am following the instructions in the book "Windows Server 2008 PKI and Certificate Security" on page 694.
As the instructions indicated, I logged in once as the service account we are using for NDES in order to create a local profile. Next, I logged in as myself (I am in the local administrators group) and opened a command prompt as an administrator and
typed the following command:
certutil -setreg debug 0xffffffe3
The output of the command was:
CertUtil: -setreg command FAILED: 0x80070002 (WIN32: 2)
CertUtil: The system cannot find the file specified.
According to the book, this should have created a file named C:\Users\ServiceAccount\Mscep.log
Can anyone advise?

Hi Mike,
Can you try the following and report the results?
Set the SCEP Application Pool in IIS to "Load User Profile".
Here are the steps:
1.
Call “iisreset” from an elevated prompt
2.
Log in to the MSCEP server once as the Service Account and ensure a local profile is created under “%SystemDrive%\Users”
3.
Log off of the Service Account and Log in as an admin
4.
Open InetMgr.exe
5.
Expand the Connection where the MSCEP Application is running
6.
Select “Application Pools”
7.
Right click the “SCEP” Application Pool and select “Advance Settings…”
8.
Under the “Process Model” section, set the “Load User Profile” to “true”
9.
Call “iisreset” from an elevated prompt
10.
Try an MSCEP operation and check if the log has been created.
11.
Verify “%SystemDrive%\Users\mscep.log” has been created.
Thanks,
John

Hyperlink von HTML auf einen Artikel in einem pdf Dokument

Hallo,
wir würden gerne in unserem intranet von einer HTML Seite direkt auf einen Artikel in einem pdf Dokument verlinken.
Bisher ist es uns nur gelungen das pdf Dokument auf der Startseite zu öffnen.
Danke für eure Hilfe.

Danke, das ist sicher eine Möglichkeit wenn man nur einmal in das Dokument verlinken will. Wir müssen aber auf mehrere Stellen verlinken.
Ich hatte diese Frage auch noch im englischen Forum gestellt und dazu eine Lösungsmöglichkeit über PDF Open Parameters bekommen.
Für alle die ein ähnliches Problem haben möchte ich die Link auch hier noch einmal einfügen.
http://partners.adobe.com/public/developer/en/acrobat/PDFOpenParameters.pdf

Hallo, ich habe seit einigen Tagen das Problem, dass im App. Store meine gekauften Artikel nicht mehr angezeigt werden. Kann mir hier jemand weiterhelfen?

Hallo an Alle,
Habe wie oben beschrieben seit einigen Tagen das Problem, das ich auf meinem neuen IPad im AppStore die gekauften Artikel nicht mehr angezeigt werden. Kann mir hier irgendwer bei diesem Problem weiterhelfen.
Viele Grüße Alex

Ich habe jetzt nach Upgrade auf Yosemite das gleiche Problem.
Und wenn ich die Bestätigungsprozedur durchlaufen bin. kommt erst das:
Und dann beginnt das Spiel von vorne!
Was nun? Beim Versuch den Apple-Support zu kontaktieren, scheitere ich. Wie macht man das?

NDES Certificate Enrollment on Surface fails

Hi all
I implemented a NDES infra based on Pietrs Blog in my Sandpit Lab (Infra runs on ConfigMgr 2012 R2 CU4), OS 2012 R2
http://blogs.technet.com/b/tune_in_to_windows_intune/archive/2014/04/25/part-2-scep-certificate-enrolling-using-configmgr-2012-crp-ndes-and-windows-intune.aspx I repeated each step sure 2 or 3 times.
If I try to assign a Client Cert/user Cert (both of them) it always fails 0X87D1FDE8 Remediation failed as posted here
https://social.technet.microsoft.com/Forums/en-US/15aebec7-4870-49af-8c0c-17d3d376783a/ndes-scep-certificate-profile-0x87d1fde8-remediation-failed-deployment-of-certificate-profiles?forum=configmanagermdm&prof=required
(All Certs are new re-created. NDES, CRP new installed). If there are no enrollments of certs possible I can understand it but Android 4.2 Devices are enrolling like a charme. A Detail the NDES Server is reachable via WAP Proxy but this works (If I enter
the Test URL I'm able to open the cert file). Finally on the Surface the Regkey in the MDM Hive is created and the NDES URi is available. All Log Files are looking fine.
Any ideas/help or tips will be very appreciated.
Cheers,
+Mat

All
It is running know. It was a heavy war in My lab ... ;-) - and raised from several missconfigured components and Settings. For an easier overview enclosed by component:
CA
I have an Enterprise Root CA with subordinated Issueing CA in the lab. Failure 1: The life time of the Issueing CA Cert is only configured for 2 years. So I changed this using certutil to 10 years (Root CA 20 years, Issueing 10 years). Failure 2: The NDES
Template had a longer life time than the issueing CA. This raised in the failed cert request the issue "Life time incorrect"
WAP Proxy
On the WAP Proxy the required Settings
Location: HKLM\SYSTEM\CurrentControlSet\Services\HTTP\Parameters
Value: MaxFieldLength
Type DWORD
Data: 65534 (decimal)
Location: HKLM\SYSTEM\CurrentControlSet\Services\HTTP\Parameters
Value: MaxRequestBytes
Type DWORD
Data: 65534 (decimal)
were applied but the required December Update 2014 Hotfix
http://blogs.technet.com/b/ems/archive/2014/12/11/hotfix-large-uri-request-in-web-application-proxy-on-windows-server-2012-r2.aspx was not properly installed (the WAP Proxy is a Workgroup Server)
NDES
The listed http Settings above I made a mistake (Dec and Hex) so typically copy/past error.
CRP
At least one Server is properly configured
Some Remarks
Within the Policies both certs Root and Iuessing CA has to be deployed to the Root Store. Later on in the configuration for the SECP Cert enrollment the template of the issueing CA has to be choosen.
Very happy that this is rolling. Next step is to configure the WIFI Network (NPAS) that only devices with a valid Client certificate can use them.
The biggest pain Overall is that the logging process is not really helpful and confusing e.g. the MCSEP.log reports
2905.902.0:<2015/4/14, 19:31:3>: 0x80090349 (-2146892983 SEC_E_CERT_WRONG_USAGE): 44D6EDAE C3C7C52F DE1B2CE4 9C102C22 5DF4CC54 but the enrolling is working fine. Here Microsoft should investigate for a better overview.
Cheers,
+mat

MEPO1319-IDNLF - Lief.Artikel as default in the I/O field

Hi community,
I have a strange problem in the dynpro 1319 of program SAPLMEGUI (Transaction SE51).
The system has the default setting "Lief.Art" in the I/O field (in our Q-System the field is filled with ___________________________________.) witch causes an error when I create a purchse order with transaction ME21N. In the item of the purchase order the value EKPO-IDNLF shows "Lief.Art" as default in the dynpro. When I try to change the field, i get the error message 00 088.
Can somebody tell me, why the value "Lief.Art" is as default in the dynpro of SAPLMEGUI? I did not do any changes on that an found no customizing.
Thank you a lot... )
Best regards,
Oliver

Hi Kiran!
I agree with all points. I have no rights to change it, because the owner of the program an dynpro is sap. Nevertheless I need to find out, why the value "Lief.Artikel" is stored in the dynpro. I´ve checked several systems, but did not found even one with this entry. what is stored in your system?
Regards,
Oliver

Artikel-Anfangsbestände maschinell einlesen

Similar Messages

Maybe you are looking for