AS Java 7.01 Install - Port Error

Experts, I'm in the process of installing NetweaverAS Java (only no ABAP) 7.01 instance on Lunix Redhat 5. I am getting the following error after starting sapinst:
Logon Error:
Connection to SAPisnt could not be established, see following message
Could not connect to host localhost on port 21200
java.net.ConnectException: Connection timed out
java.net.ConnectException: Connection timed out
I have confirmed with the unix/server group that the ports are not in use
This obviously looks like an issue with the port, but I've been assured that the port is open/available. Does anyone have any insight?

Hello Michael,
Check for the all variable before s tarting the sapgui like java_home, LD_LIBRARY and DISPLAY try again.
Also try to use below commands
./startInstGui.sh -server -host <Linux Server IP Address> -p 21200
or
./startinstgui.sh -host <your_linuxserver_host_name>
or
./sapinst GUISERVER_DIALOG_PORT=21215
and let us know if you are still facing issues.
Thanks and Regards,
Ram

Similar Messages

Install port error.

Howdy all. I just installed 10g and during the install got an error about not being able to use the assigned port because it was set to NULL. It also said I would be able to go back and fix in Enterprise Manager after the install was complete. But then at the end of the install there is no link displayed for EM the way there is for iSQLPlus. Can someone pelase assist?
TIA, ChrisR

Hi,
http://dbataj.blogspot.com/2007/01/oc4j-configuration-issue.html
go through above link and create if not configure OEM for your database or CONFIGURE your database for OEM.
regards
Taj

Java is already install

hi group,
I try to install the last version of java sun and this message appear :
******* Java is already install *************
******* Internal error 2753. RegUtils*******
What I have done;
- I tried to download the last version of 7Mo but it was just a little file of 373Ko who was transfer.
- I have installed this file of 373Ko
- I use RevoUninstaller to uninstall Java and clean all directory and register
- I download the Java file of 15Mo
- And I try to install it with the error message I just told ( I try to reboot)
I use FF and IE
How solve this.
thank.

somebody,
Apparently I happen in the Java programmer forum.
I am a simple use of java who try to install the last version, and I never have problem for update they other version.
Ok, what new, well I restore Windows with a disk image.
-After I install yet the last update of Java with the little file of 373Ko.
-When I ran the test, it was still write "you do not have the last version"
-I unstalled the new version(6) and after the version before(5)
-And I reinstall the last version (6)
-And the test say again "you do not have the last version"
Is it me or this last version have a problem.
How change my topic to the right forum and which is the name of this forum.
thank.

Portal 7.2 Install - Port:: Unable to verify port.

I have been attempting to install Portal Server 7.2 on Solaris 10(5/08). I have sucessfully installed Access Manager and Directory server from JES U1. However when i tried to install the Portal Server, I got "Unable to verify port" error. I provided the default port of Sun Java Application Server 9.1, 8080. Could anyone please suggest a way out of this impasse please, I will be much obliged.

Can you look in the installer log file (it should be created in /tmp/install*.log or in /var/tmp).
It should tell you why the SIMS Backend was unable to initialize. Some things to check:
- Your system should have the rpm tool installed at /bin/rpm
- Do you have have any old, corrupt RPM DB entries? You can clean them up with
rpm -e `rpm -qa|grep sims-product`

Java.rmi.ServerException: Missing port information

when i call the service ,i got the error:
run-test-client:
[java] java.rmi.ServerException: Missing port information
[java] at com.sun.xml.rpc.client.StreamingSender._raiseFault(StreamingS
ender.java:382)
[java] at com.sun.xml.rpc.client.StreamingSender._send(StreamingSender.
java:234)
[java] at sys.SetIF_Stub.getdeviceid(SetIF_Stub.java:68)
[java] at sys.StockPriceFetcher.getdeviceid(Unknown Source)
[java] at sys.TestPriceFetcher.main(Unknown Source)
what cause it??
in my SetImpl.java i use wurfltags.jar
//SetImpl.java
package sys;
import java.io.*;
import java.net.*;
import java.util.*;
import net.sourceforge.wurfl.wurflapi.*;
public class SetImpl implements SetIF {
     private String ret="";
private ProConf pc;
private MyObjectsManager mom;
     public SetImpl(){}
public String getdeviceid(String request)
String result="";
try{
mom=new MyObjectsManager();
mom.wurflWebInit();
UAManager uam =mom.getUAManagerInstance();
result=uam.getDeviceIDFromUA("MOT-T720/05.08.41R MIB/2.0 Profile/MIDP-1.0 Configuration/CLDC-1.0");
System.out.println(result);
catch(Exception e){}
return result;
and, i generate the wsdl file and deploy it successfully. but in the client
when i call the service it will be error.
the client code is:
/////////StockPriceFetcher.java
package sys;
import javax.xml.rpc.*;
import com.sun.xml.rpc.client.*;
public final class StockPriceFetcher {
public static final String getdeviceid(String req,String endpoint) {
String result="";
try {
SetIF_Stub stub =(SetIF_Stub)(new SystemConfiguration_Impl().getSetIFPort());
stub._setProperty(javax.xml.rpc.Stub.ENDPOINT_ADDRESS_PROPERTY,endpoint);
result = stub.getdeviceid(req);
} catch (Exception ex) {
ex.printStackTrace();
return result;
} // getLonNowItem
//////////////////////TestPriceTetcher.java
package sys;
import java.math.BigDecimal;
import java.util.*;
public class TestPriceFetcher {
public static void main(String[] args) {
try {
// String result=StockPriceFetcher.endsetinfo("ball=5&srv=7&pcode=500001","http://192.152.251.224:8080/jaxrpc-sys/jaxrpc");
String result=StockPriceFetcher.getdeviceid("ball=5&srv=7&pcode=500001","http://192.152.251.224:8080/jaxrpc-sys/jaxrpc");
System.out.println(result+"bb");
} catch (Exception ex) {
ex.printStackTrace();
when i run the testpricefetcher.java it will raise the above error infomation.
it spent 2 days for me to find the problem, but i cannot solve it.
i think it does matter with the wurfl package.because i doesnt use the method of the package in the SetImpl.java it will be ok. How to call the package?please give me a hand.

can you give me a hand!thank you

Install odi error

edit file :/etc/profile，add content:
JAVA_HOME="/usr/local/jdk1.5.0"
JRE_HOME="/usr/local/jdk1.5.0/jre"
PATH=$PATH:$HOME/bin:$JAVA_HOME/bin:$JRE_HOME/bin
CLASSPATH=.:$JAVA_HOME/lib/:$JRE_HOME/lib/
export JAVA_HOME JRE_HOME PATH CLASSPATH
[oracle@localhost linux_i386]$ ./setup.bin
Preparing to install...
Extracting the JRE from the installer archive...
Unpacking the JRE...
Extracting the installation resources from the installer archive...
Configuring the installer for this system's environment...
Launching installer...
Error redirecting stderr. Output will be placed into 'err.txt' instead.
IAResourceBundle: create resource bundle: en
seaFilename = setup
Default properties location = /home/oracle/odi/setup/linux_i386/
UI Mode set to Default - SWING.
InstallAnywhere 7.1 Enterprise
Mon Feb 19 16:20:31 CST 2007
Free memory = 14420 kB
Total memory = 16320 kB
No arguments.
java.class.path:
/tmp/install.dir.3711/InstallerData
/tmp/install.dir.3711/InstallerData/installer.zip
/usr/local/jdk1.5.0/lib/
/usr/local/jdk1.5.0/jre/lib/
ZGUtil.CLASS_PATH:
/tmp/install.dir.3711/InstallerData
/tmp/install.dir.3711/InstallerData/installer.zip
/usr/local/jdk1.5.0/lib/
/usr/local/jdk1.5.0/jre/lib/
sun.boot.class.path:
/tmp/install.dir.3711/Linux/resource/jre/lib/rt.jar
/tmp/install.dir.3711/Linux/resource/jre/lib/i18n.jar
/tmp/install.dir.3711/Linux/resource/jre/lib/sunrsasign.jar
/tmp/install.dir.3711/Linux/resource/jre/lib/jsse.jar
/tmp/install.dir.3711/Linux/resource/jre/lib/jce.jar
/tmp/install.dir.3711/Linux/resource/jre/lib/charsets.jar
/tmp/install.dir.3711/Linux/resource/jre/classes
java.ext.dirs:
/tmp/install.dir.3711/Linux/resource/jre/lib/ext
java.version == 1.4.2_08 (Java 2+)
java.vm.name == Java HotSpot(TM) Client VM
java.vm.vendor == Sun Microsystems Inc.
java.vm.version == 1.4.2_08-b03
java.vm.specification.name == Java Virtual Machine Specification
java.vm.specification.vendor == Sun Microsystems Inc.
java.vm.specification.version == 1.0
java.specification.name == Java Platform API Specification
java.specification.vendor == Sun Microsystems Inc.
java.specification.version == 1.4
java.vendor == Sun Microsystems Inc.
java.vendor.url == http://java.sun.com/
java.class.version == 48.0
java.compiler == null
java.home == /tmp/install.dir.3711/Linux/resource/jre
java.io.tmpdir == /tmp
os.name == Linux
os.arch == i386
os.version == 2.4.21-47.EL
path.separator == :
file.separator == /
file.encoding == UTF-8
user.name == oracle
user.home == /home/oracle
user.dir == /tmp/install.dir.3711
user.language == en
user.region == null
System's temporary directory = /tmp
Installer: InstallAnywhere 7.1 Enterprise Build 2763
Loading externalized properties
Command.run(): process completed before monitors could start.
MODE: -rwxr-xr-x 1 root root 65076 Oct 13 02:29 /usr/local/jdk1.5.0/bin/java
Command.run(): process completed before monitors could start.
MODE: -rwxr-xr-x 1 root root 65076 Oct 13 02:29 /usr/local/jdk1.5.0/jre/bin/java
AAMgr: running jump action
AAMgr: running jump action
JumpAction: no Jump Label target specified
RepositoryManager: Trying fallback repository location...
XMLScriptWriter: No Installation Objects were skipped
ZGFile.copy: The requested files were not found.
EditEnvironmentVariable: error editing global UNIX Bourne shell config files.Trying user oracle UNIX Bourne shell config files.
EnvironmentFileWriter: Creating /etc/.login.
EditEnvironmentVariable: error editing global UNIX C shell config files.Trying user oracle UNIX C shell config files.
Ignoring attempt to edit csh config files.
EditEnvironmentVariable: error editing global UNIX zsh config files.Trying user oracle UNIX zsh config files.
Ignoring attempt to edit zsh config files.
Retrying Installables deferred in pass 0
Deferral retries done because:
There were no deferrals in the last pass.
RepositoryManager: repository successfully written to stable storage
RepositoryManager: repository successfully written to stable storage
Execute Custom Code
class RefreshEnvironment.install() Unexpected Fatal Error:
java.lang.UnsatisfiedLinkError: no refresh in java.library.path
at java.lang.ClassLoader.loadLibrary(Unknown Source)
at java.lang.Runtime.loadLibrary0(Unknown Source)
at java.lang.System.loadLibrary(Unknown Source)
at RefreshEnvironmentJNI.<clinit>(RefreshEnvironmentJNI.java:33)
at RefreshEnvironment.install(RefreshEnvironment.java:57)
at com.zerog.ia.installer.actions.CustomAction.installSelf(DashoA8113)
at com.zerog.ia.installer.actions.PlugInAction.installSelf(DashoA8113)
at ZeroGx1.run(DashoA8113)
Did not match to message method
SHUTDOWN REQUESTED
REGISTRY ALREADY STORED!
cleanUp()
calling cleanUpUNIX()
[oracle@localhost linux_i386]$
[oracle@localhost oracledi]$ tail Oracle_Data_Integrator_InstallLog.log
Status: SUCCESSFUL
Set Environment Variable: ODI_JAVA_HOME = /usr/local/jdk1.5.0
Status: SUCCESSFUL
Custom Action: RefreshEnvironment
Status: ERROR
Additional Notes: ERROR - class RefreshEnvironment.install() Unexpected Fatal Error:
[oracle@localhost oracledi]$
need help to solve this problem.
thanks

Hello FX, thank you for your reply.
My OS is CentOS3.8
[oracle@localhost oracle]$ locale
LANG=en_US.UTF-8
LC_CTYPE="en_US.UTF-8"
LC_NUMERIC="en_US.UTF-8"
LC_TIME="en_US.UTF-8"
LC_COLLATE="en_US.UTF-8"
LC_MONETARY="en_US.UTF-8"
LC_MESSAGES="en_US.UTF-8"
LC_PAPER="en_US.UTF-8"
LC_NAME="en_US.UTF-8"
LC_ADDRESS="en_US.UTF-8"
LC_TELEPHONE="en_US.UTF-8"
LC_MEASUREMENT="en_US.UTF-8"
LC_IDENTIFICATION="en_US.UTF-8"
LC_ALL=
[oracle@localhost oracle]$ uname -a
Linux localhost.localdomain 2.4.21-47.EL #1 Tue Aug 1 08:56:24 EDT 2006 i686 i686 i386 GNU/Linux
[oracle@localhost oracle]$
Are you root to perform this operation on the Linux box?
No.oracle user.
It's installed successful
last step
http://amd.streamload.com/psaux/Hosted/odi.png
I can use it,but i want to know how to solve this install error.

Voiceover kit will not install 1603 error win8

Voiceoverkit will not install. Error code 1603. Running Win8. iTunes 11.0.5.5

Hello tzachman,
Thank you for using Apple Support Communities!
It sounds like you are getting an error message when trying to get the Voiceover kit to install.
I found an article that seems to address this error code specifically named iTunes: Specific update-and-restore error messages and advanced troubleshooting found here http://support.apple.com/kb/TS3694#error1603
Error 1603
Follow the steps listed above for Error 1604. Also, discard the .ipsw file, open iTunes and attempt to download the update again. See the steps under Advanced Steps > Rename, move, or delete the iOS software file (.ipsw) below for file locations. If you do not want to remove the IPSW in the original user, try restoring in a new administrator user. If the issue remains, Eliminate third-party security software conflicts
Here is the troubleshooting from the 1604 section that it references:
This error is often related to USB timing. Try changing USB ports, using a different dock connector to USB cable, and other available USB troubleshooting steps (troubleshooting USB connections. If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode, put it into Recovery Mode.
Restore and wait for the error.
When prompted, click OK.
Close and reopen iTunes while the device remains connected.
The device should now be recognized in Recovery Mode again.
Try to restore again.
If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.
Take care,
Sterling

Java Mail throws Connect failed error in Oracle 11g Enterprise Edition

Hi,
I am using Oracle 11g Enterprise edition.I have a java class which is used for reading outlook 2010 inbox and download attachments from mails .For Connecting to OutLook from oracle i am using "POP3S" protocol in my java class. Which is working fine until my database is oracle-11g standard edition. Last week we are upgraded our database from oracle 11g standard edition to oracle 11g enterprise edition after that i can't connect to mail server through my java class which throws an error as follows.
DEBUG: setDebug: JavaMail version 1.4.4
DEBUG: getProvider() returning javax.mail.Provider[STORE,pop3s,com.sun.mail.pop3.POP3SSLStore,Sun Microsystems, Inc]
DEBUG POP3: mail.pop3s.rsetbeforequit: false
DEBUG POP3: mail.pop3s.disabletop: false
DEBUG POP3: mail.pop3s.forgettopheaders: false
DEBUG POP3: mail.pop3s.cachewriteto: false
DEBUG POP3: mail.pop3s.filecache.enable: false
DEBUG POP3: mail.pop3s.keepmessagecontent: false
DEBUG POP3: mail.pop3s.starttls.enable: true
DEBUG POP3: mail.pop3s.starttls.required: false
DEBUG POP3: mail.pop3s.apop.enable: false
DEBUG POP3: mail.pop3s.disablecapa: false
DEBUG POP3: connecting to host "194.42.133.180", port 110, isSSL true
javax.mail.MessagingException: Connect failed;
nested exception is:
     javax.net.ssl.SSLException: Unrecognized SSL message, plaintext connection?
     at com.sun.mail.pop3.POP3Store.protocolConnect(POP3Store.java:210)
     at javax.mail.Service.connect(Service.java:295)
     at javax.mail.Service.connect(Service.java:176)
     at GetNoonReport.Connect2Mailserver(GetNoonReport:338)
     at GetNoonReport.ReadMail(GetNoonReport:103)
Caused by: javax.net.ssl.SSLException: Unrecognized SSL message, plaintext connection?
     at com.sun.net.ssl.internal.ssl.InputRecord.handleUnknownRecord(InputRecord.java:501)
     at com.sun.net.ssl.internal.ssl.InputRecord.read(InputRecord.java)
     at com.sun.net.ssl.internal.ssl.SSLSocketImpl.readRecord(SSLSocketImpl.java)
     at com.sun.net.ssl.internal.ssl.SSLSocketImpl.performInitialHandshake(SSLSocketImpl.java:1025)
     at com.sun.net.ssl.internal.ssl.SSLSocketImpl.startHandshake(SSLSocketImpl.java:1038)
     at com.sun.mail.util.SocketFetcher.configureSSLSocket(SocketFetcher.java:507)
     at com.sun.mail.util.SocketFetcher.getSocket(SocketFetcher.java:238)
     at com.sun.mail.pop3.Protocol.<init>(Protocol.java:107)
     at com.sun.mail.pop3.POP3Store.getPort(POP3Store.java:261)
     at com.sun.mail.pop3.POP3Store.protocolConnect(POP3Store.java:206)
     ... 4 more
Is Oracle Enterprise Edition supports "POP3S" protocol?, Or Enterprise edition needs any additional configuration for establishing outlook connection with "pop3s" ?.
Any help is appreciated
Regards ,
Nisanth

907833 wrote:
Hi,
I am using Oracle 11g Enterprise edition.I have a java class which is used for reading outlook 2010 inbox and download attachments from mails .For Connecting to OutLook from oracle i am using "POP3S" protocol in my java class. Which is working fine until my database is oracle-11g standard edition. Last week we are upgraded our database from oracle 11g standard edition to oracle 11g enterprise edition after that i can't connect to mail server through my java class which throws an error as follows.
I suspect root cause is with Java not Oracle.
Oracle RDBMS does NOT speak any "protocol" except SQL natively.

Java.sql.SQLException: I/O Error: Connection reset on MS-SQL Server 2000

Anybody able to help me with this Java-JDBC Problem?
I'm creating a ResultSet and execute a query which approximatelly delivers me 11.000 rows.
With the given ResultSet i'd like to move through the records forward only.
In my while loop I'm able to reach ~9700 rows and then unexpectedly i get the error:
java.sql.SQLException: I/O Error: Connection reset
at net.sourceforge.jtds.jdbc.TdsCore.nextToken(TdsCore.java:2277)
at net.sourceforge.jtds.jdbc.TdsCore.getNextRow(TdsCore.java:761)
at net.sourceforge.jtds.jdbc.JtdsResultSet.next(JtdsResultSet.java:593)
at ag.oase.jobs.Datenschaufel.Betriebabgleich(Datenschaufel.java:1629)
at ag.oase.jobs.Datenschaufel.main(Datenschaufel.java:183)
Caused by:
java.net.SocketException: Connection reset
at java.net.SocketInputStream.read(SocketInputStream.java:197)
at java.io.DataInputStream.readFully(DataInputStream.java:202)
at net.sourceforge.jtds.jdbc.SharedSocket.readPacket(SharedSocket.java:860)
at net.sourceforge.jtds.jdbc.SharedSocket.getNetPacket(SharedSocket.java:707)
at net.sourceforge.jtds.jdbc.ResponseStream.getPacket(ResponseStream.java:466)
at net.sourceforge.jtds.jdbc.ResponseStream.read(ResponseStream.java:103)
at net.sourceforge.jtds.jdbc.ResponseStream.readInt(ResponseStream.java:318)
at net.sourceforge.jtds.jdbc.TdsData.readData(TdsData.java:680)
at net.sourceforge.jtds.jdbc.TdsCore.tdsRowToken(TdsCore.java:2968)
at net.sourceforge.jtds.jdbc.TdsCore.nextToken(TdsCore.java:2236)
... 4 more
I'm using the jTDS JDBC driver.
I googled a lot but didn't found a solution for this problem?
So please help me!
Thanks in advance
Ren�

...OWB repository cannot be installed into Oracle XE.
Cheers
David

Java TM Plug-in Fatel Error.

Dear Sir,
I use MyEclipse (eclipse-SDK-3.1-win32) and EnterpriseWorkbenchInstaller_4.1GA_E3.1(1).
I installed the Bea weblogic 8.1 and MyEclipse on D drive due to little space on C driive.
I configured the BEA weblogic 8.1 Application server with My Eclipse.
With My Eclipse I used Weblogic 8.1. Weblogic have a jdk141_02 which is in built with weblogic 8.1. Weblogic 8.1 do not work with jdk 1.5.
After the deploy of file and when I click on Eclipse Browser Icon.
Eclipse Browser windows show that:
Java TM Plug-in Fatel Error.
Can not load class-sun\plug-in\JavaRunTime.
The Bridge was Installed at <D:\PRPGRAM\Java>
but the class is not there.
Modify the registry key to reflect the new bridge location.
The Key is HKEY_LOCAL_MACHINE\SOFTWARE\JavaSoft\Java Plugin or change
your CLASSPATH to include the new directory.
I already set the CLASSPATH=D:\bea\weblogic81\server\lib\weblogic.jar;.
PATH=D:\bea\jdk141_02\bin;.
Please help..

Here is how I fixed the problem on my computer. got to control panel. click on add or remove programs. I saw two spots that had java. java tm se runtime environment 6 update 1 and one other one that said java. do not remove the one that says java tm se runtime environment 6 update 1. You want to click on remove on the one under it. I also removed my messenger live. now I have no problems on going to play my yahoo games!!

Java.lang.OutOfMemoryError:PermGen space error

We haven't been able to go live with our help systems on RoboHelp Server 8 yet due to some major memory issues with Tomcat/RoboHelp Server. We've been working with Tulika on this issue, but I just wanted to check in and see if anyone else here has experienced such a thing, and if so....what did you do to fix it?
After installing the server, having it up and running for a few months, and posting help systems to the server....it suddenly has serious memory issues that are making it crash.
We were advised to configure the maximum and minimum heap space setings for Initial memory pool and maximum memory pool both to the following: 256, 512, 768 and 1024.
We are receiving the java.lang.OutOfMemoryError: PermGen space error when increasing the setting to 512. When trying to increase the setting to 768 or 1024 Apache Tomcat uses 100% of the CPU and then stops after about a minute. When trying to start the service back up it spikes to 100% CPU usage and then dies again. This happens continuously and makes it so the services constantly stop! If you try to hit a site that is hosted on the RH 8 Server it causes it to spike and crashes.
Overview:
Software being used Adobe Robohelp8 and Apache Tomcat 6.0.
We have around 11 sites being hosted on Robohelp8.
Server specs are 2.93GHz processor and 4G RAM.

Hi jdcyclone1,
You need to increase PermSpace available to your tomcat. You can do that using <tomcat-install-dir>/bin/tomcat6w.exe
Just ensure that your “Maximum memory pool” and “XX:MaxPermSize” should not add up to more than actual memory you can make available to tomcat. The setting is as shown in this snapshot:

Installation error Install Failed: Error Domain=PKInstallErrorDomain Code=112

Trying to install an application or "whatever", from a mounted dmg image installer gives this error:
Install Failed: Error Domain=PKInstallErrorDomain Code=112.
A developer I contacted suggested a workaround by disabling/enabling checkmark of "Ignore ownership on this volume".
Is there anyone knowing the reason for this issue and final solution?
PS I already have verified/repaired permissions on boot disk.

Steps to do
1) /etc/hosts now reads:
127.0.0.1 localhost
192.168.56.101 demo.us.oracle.com oracle-pc
2) updated java in path /usr/java from 1.5 to the latest version (1.6.0_27) by rpm-deinstalling the old version first and
then rpm-installing the new version.
3) Don't do a simple install.
Instead u installed WebLogic Server 10.3.5 first, than do the Repository creation with RCU, followed by the BI Server software only install
and finally the BI Server configuration.
Marks as correct if helpful or let me know the updates?

Java.lang.RuntimeException : I/O error opening JAR file

          Hi,
          Cluster configuration : 2 NT boxes WLS5.1(SP6). On one m/c weblogic
          is installed on drive C:\ and on another m/c weblogic is installed on drive D:\.
          i.e. all jars are at two place m/c 1 : c:\weblogic\myserver\*.jar
          m/c 2 : d:\weblogic \myserver\*.jar
          When servers startup successfully, error is coming :
          on the console of m/c 1 :
          java.lang.RuntimeException : I/O error opening JAR file from
          file:/d:/weblogic/myserver/eb_arn.jar
          on the console of m/c 2 :
          java.lang.RuntimeException : I/O error opening JAR file from
          file:/c:/weblogic/myserver/eb_arn.jar
          When both the weblgoic servers are installed on two machines and
          on same drive(c:\), this error is not coming.
          i.e. all jars are at two place m/c 1 : c:\weblogic\myserver\*.jar
          m/c 2 : c:\weblogic \myserver\*.jar
          Regards,
          Jitendra Kumar.


Jitendra,
          This looks like a bug. Please approach support.
          - Prasad
          Jitendra Kumar wrote:
          > Hi,
          >
          > I'm deploying as per server property, because all servers have got their own myserver
          > directory and jars under that.
          > primary key class is not a problem at all, because that file is anyway under serverclasses directory.
          >
          > The problem starts when two weblogic servers on two m/c are installed on different drive(one on 'C:\' dirve
          > and another on 'D:\' drive or a unix machine in cluster).
          >
          > Regards,
          > Jitendra Kumar.
          >
          > Prasad Peddada <[email protected]> wrote:
          > >Are you sure that the the primary key class is there in the jar file.
          > >
          > >Are you deploying as per cluster property? Deploy on all the servers as per server property.
          > >
          > >
          > >- Prasad
          > >
          > >Jitendra Kumar wrote:
          > >
          > >> Hi,
          > >>
          > >> I don't have any problem in deploying beans and all servers have their local jar files.
          > >> Today I started solaris server in cluster and that also giving the same error message in console.
          > >> Now 2NT and One Solaris m/c running in cluster.
          > >>
          > >> error message on NT console is :
          > >> **************************************************
          > >> Sat Nov 04 15:43:14 GMT+05:30 2000:<E> <MulticastSocket> Multicast socket receive error: java.lang.R
          > >> untimeException: I/O error opening JAR file from file:/mazaa/weblogic/weblogic/myserver/voter.jar
          > >> <ServerClassLoader><W>: com.cot.eis.vl.eb_voter.VoterPK in not in archive java.util.zip.ZipFile@b902
          > >> 66be
          > >> java.util.zip.ZipException: error in opening zip file
          > >> at java.util.zip.ZipFile.open(Native Method)
          > >> at java.util.zip.ZipFile.<init>(ZipFile.java, Compiled Code)
          > >> at java.util.zip.ZipFile.<init>(ZipFile.java, Compiled Code)
          > >> at weblogic.boot.ServerClassLoader.deploy(ServerClassLoader.java, Compiled Code)
          > >> at weblogic.cluster.AnnotatedServiceOffer.expandClassPath(AnnotatedServiceOffer.java, Compil
          > >> ed Code)
          > >> at weblogic.cluster.AnnotatedServiceOffer.readObject(AnnotatedServiceOffer.java, Compiled Co
          > >> de)
          > >> at weblogic.common.internal.WLObjectInputStreamBase.readPublicSerializable(WLObjectInputStre
          > >> amBase.java, Compiled Code)
          > >> at weblogic.common.internal.WLObjectInputStreamBase.readLeftover(WLObjectInputStreamBase.jav
          > >> a, Compiled Code)
          > >> at weblogic.common.internal.WLObjectInputStreamBase.readObjectBody(WLObjectInputStreamBase.j
          > >> ava, Compiled Code)
          > >> at weblogic.common.internal.WLObjectInputStreamBase.readObject(WLObjectInputStreamBase.java,
          > >> Compiled Code)
          > >> at weblogic.common.internal.WLObjectInputStreamBase.readObjectWL(WLObjectInputStreamBase.jav
          > >> a, Compiled Code)
          > >> at weblogic.common.internal.WLObjectInputStreamBase.readArrayList(WLObjectInputStreamBase.ja
          > >> va, Compiled Code)
          > >> at weblogic.cluster.StateDump.readObject(StateDump.java, Compiled Code)
          > >> at weblogic.common.internal.WLObjectInputStreamBase.readPublicSerializable(WLObjectInputStre
          > >> amBase.java, Compiled Code)
          > >> at weblogic.common.internal.WLObjectInputStreamBase.readLeftover(WLObjectInputStreamBase.jav
          > >> a, Compiled Code)
          > >> at weblogic.common.internal.WLObjectInputStreamBase.readObjectBody(WLObjectInputStreamBase.j
          > >> ava, Compiled Code)
          > >> at weblogic.common.internal.WLObjectInputStreamBase.readObject(WLObjectInputStreamBase.java,
          > >> Compiled Code)
          > >> at weblogic.common.internal.WLObjectInputStreamBase.readObjectWL(WLObjectInputStreamBase.jav
          > >> a, Compiled Code)
          > >> at weblogic.cluster.TMSocket.execute(TMSocket.java, Compiled Code)
          > >> at weblogic.kernel.ExecuteThread.run(ExecuteThread.java, Compiled Code)
          > >> Sat Nov 04 15:54:24 GMT+05:30 2000:<E> <MulticastSocket> Multicast socket receive error: java.lang.R
          > >> untimeException: I/O error opening JAR file from file:/mazaa/weblogic/weblogic/myserver/voter.jar
          > >>
          > >> error message on Solaris console is :
          > >> ******************************************
          > >> java.util.zip.ZipException: error in opening zip file
          > >> at java.util.zip.ZipFile.open(Native Method)
          > >> at java.util.zip.ZipFile.open(Compiled Code)
          > >> at java.util.zip.ZipFile.<init>(Compiled Code)
          > >> at java.util.zip.ZipFile.<init>(Compiled Code)
          > >> at weblogic.boot.ServerClassLoader.deploy(Compiled Code)
          > >> at weblogic.cluster.AnnotatedServiceOffer.expandClassPath(Compiled Code)
          > >> at weblogic.cluster.AnnotatedServiceOffer.readObject(Compiled Code)
          > >> at weblogic.common.internal.WLObjectInputStreamBase.readPublicSerializab
          > >> le(Compiled Code)
          > >> at weblogic.common.internal.WLObjectInputStreamBase.readLeftover(Compile
          > >> d Code)
          > >> at weblogic.common.internal.WLObjectInputStreamBase.readObjectBody(Compi
          > >> led Code)
          > >> at weblogic.common.internal.WLObjectInputStreamBase.readObject(Compiled
          > >> Code)
          > >> at weblogic.common.internal.WLObjectInputStreamBase.readObjectWL(Compile
          > >> d Code)
          > >> at weblogic.common.internal.WLObjectInputStreamBase.readArrayList(Compil
          > >> ed Code)
          > >> at weblogic.cluster.StateDump.readObject(Compiled Code)
          > >> at weblogic.common.internal.WLObjectInputStreamBase.readPublicSerializab
          > >> le(Compiled Code)
          > >> at weblogic.common.internal.WLObjectInputStreamBase.readLeftover(Compile
          > >> d Code)
          > >> at weblogic.common.internal.WLObjectInputStreamBase.readObjectBody(Compi
          > >> led Code)
          > >> at weblogic.common.internal.WLObjectInputStreamBase.readObject(Compiled
          > >> Code)
          > >> at weblogic.common.internal.WLObjectInputStreamBase.readObjectWL(Compile
          > >> d Code)
          > >> at weblogic.cluster.TMSocket.execute(Compiled Code)
          > >> at weblogic.kernel.ExecuteThread.run(Compiled Code)
          > >> Sat Nov 04 15:55:09 GMT+00:00 2000:<E> <MulticastSocket> Multicast socket receiv
          > >> e error: java.lang.RuntimeException: I/O error opening JAR file from file:/C:/we
          > >> blogic/myserver/eb_arn.jar
          > >>
          > >> Regards,
          > >> Jitendra Kumar
          > >>
          > >> Prasad Peddada <[email protected]> wrote:
          > >> >Do you trouble deploying the app also.
          > >> >
          > >> >- Prasad
          > >> >
          > >> >Jitendra Kumar wrote:
          > >> >
          > >> >> Hi,
          > >> >>
          > >> >> Cluster configuration : 2 NT boxes WLS5.1(SP6). On one m/c weblogic
          > >> >> is installed on drive C:\ and on another m/c weblogic is installed on drive D:\.
          > >> >> i.e. all jars are at two place m/c 1 : c:\weblogic\myserver\*.jar
          > >> >> m/c 2 : d:\weblogic \myserver\*.jar
          > >> >> When servers startup successfully, error is coming :
          > >> >>
          > >> >> on the console of m/c 1 :
          > >> >> java.lang.RuntimeException : I/O error opening JAR file from
          > >> >> file:/d:/weblogic/myserver/eb_arn.jar
          > >> >>
          > >> >> on the console of m/c 2 :
          > >> >> java.lang.RuntimeException : I/O error opening JAR file from
          > >> >> file:/c:/weblogic/myserver/eb_arn.jar
          > >> >>
          > >> >> When both the weblgoic servers are installed on two machines and
          > >> >> on same drive(c:\), this error is not coming.
          > >> >> i.e. all jars are at two place m/c 1 : c:\weblogic\myserver\*.jar
          > >> >> m/c 2 : c:\weblogic \myserver\*.jar
          > >> >>
          > >> >> Regards,
          > >> >> Jitendra Kumar.
          > >> >
          > >
          > >--
          > >Cheers
          > >
          > >- Prasad
          > >
          > >

Unable to print to network printer // sometimes with port error

I upgraded to Leopard and am now _*unable to print to my network attached*_ *_Lexmark x9350_*. In prefs it shows the printer and driver installed. Once a print job is submitted, it reads printing, but there is no action on the printer. Other times it gives a port error. I tested the printer under OSX 4 and it printed with no problem. I also have a similar problem on the XP partition of this system. Please advise.

I don't think Lexmark has a Leopard driver for this printer yet. This problem was discussed earlier here
http://discussions.apple.com/thread.jspa?messageID=5702119&#5702119

Novell Client 2 upgrade fails to install NICI (error 1603)

I have configured the automatic update agent to specifically use Administrator Privileges according to the documentation: http://www.novell.com/documentation/...ient_admin.pdf
When I run the update from "Novell Services" in system tray as a normal user the update completes with errors: fails to install NICI (error 1603).
When I do the exact same thing as an admin, everything works fine.
I'm am trying to update Novell Client 2 SP 1 (IR7) to Novell Client 2 SP 2 (IR2) on all of our workstations.
And I am seeing the exact same error when trying to upgrade:
Novell Client 2 SP 1 (IR7) to Novell Client 2 SP 2
Novell Client 2 SP 1 (IR7) to Novell Client 2 SP 2 (IR1)
What is going on here, is the update agent broken or am I doing something wrong?
I don't want all of my users getting errors when their Novell Client gets updated.

Originally Posted by jimbjorklund
I think I'm getting closer to the actual issue, after enabling Novell Client Debugging by setting this registry value:
[HKEY_LOCAL_MACHINE\SOFTWARE\Novell\Authentication\ NCCredProvider]
"Debug"=dword:00000003
This error is found in "C:\ProgramData\Novell\Client\Log\NICIInst64.l og": Error 2103.Could not resolve path for shell folder 26
I think this has something to do with the MSI-setup (NICI_wx64.msi) not being able to find certain keys in the registry for some reason
Recently we had problem with an MSI-based Java-installation running with admin-privileges where it would fail if "Folder Redirection" was enabled. We had set My Documents to point to H:\ which was mapped via Novell as the home folder.
the registry settings for that are found under: [HKEY_CURRENT_USER\Software\Microsoft\Windows\Curre ntVersion\Explorer\User Shell Folders]. This however is NOT the problem here so the root cause for the error is still unclear to me.
Indeed, but remember we are troubleshooting the client here- it may be possible that there was some corruption in the first failed update. So thus removing any components and with a clean install of the Novell client, to try the update process again to ascertain were exactly the process may have failed by examining any logs and/or dumps.
Leroy Joseph
Visual Click Software
eDirectory Management and Reporting | DSRAZOR for eDirectory

AS Java 7.01 Install - Port Error

Similar Messages

Maybe you are looking for