AS2: cuePoints don't always trigger events

Hello,
I am trying to synchronize sound and images (images change
according to music). I have added cuePoints according to when they
need be changed and an EventListener triggered by these. When
moving the progress slider on the MediaController component
(associated with MediaDisplay - playing an mp3) sometimes it skips
some cuePoints.
Do you have any suggestions for a remedy?
Thanks anywho,
ego

In the meantime I found the answer in another post:
FLVPlayback.playheadUpdateInterval
(decreasing this number increases accuracy)

Similar Messages

Bootsplash trigger events

on the bootsplash webpage it says to
trigger events during bootup
we suggest that you add a function to your init scripts that is called every time an init script is started. This can either be done in the runlevel scripts themselves or by the script/program scheduling it (i.e. /etc/init.d/rc)
function rc_splash()
test "$SPLASH" != "no" && test "$_rc_splash" -eq 1 && /sbin/splash "$1"
progress=$(( $progress + 1 ))
when adding the rc_splash call to your runlevel script scheduler, do it
about like this:
for i in $runrc/S${rex}*; do
# send information to bootsplash handler.
rc_splash "$i start"
done
but where is the archs program scheduling file., as i dont seem to see a /etc/init.d/rc, im tying to get the Default Linux theme at bootsplashes webpage to work.. i got everything to work except silent mode to display the silent Jpeg and gradient bar
thanks
-bolero

I have now gotten the progress bar to work. After trying a couple different approaches, this is my best shot. In /etc/rc.d/functions I extended stat_busy(), stat_done() and stat_fail() to look like this:
stat_busy() {
echo -ne "$C_OTHER$PREFIX_REG $C_MAIN$1$C_CLEAR "
deltext
echo -ne " $C_OTHER[${C_BUSY}BUSY$C_OTHER]$C_CLEAR "
[ "$BOOTSPLASH_PROGRESS" -a "$BOOTSPLASH_DELTA" ] &&
BOOTSPLASH_PROGRESS=$(($BOOTSPLASH_PROGRESS+$BOOTSPLASH_DELTA))
stat_done() {
deltext
echo -e " $C_OTHER[${C_DONE}DONE$C_OTHER]$C_CLEAR "
[ "$BOOTSPLASH_PROGRESS" -a -w /proc/splash ] &&
echo "show $BOOTSPLASH_PROGRESS" > /proc/splash
stat_fail() {
deltext
echo -e " $C_OTHER[${C_FAIL}FAIL$C_OTHER]$C_CLEAR "
[ "$BOOTSPLASH_PROGRESS" -a -w /proc/splash ] &&
echo "show $BOOTSPLASH_PROGRESS" > /proc/splash
The idea is that $BOOTSPLASH_PROGRESS holds the current value of the progress bar (which is in the range 0 - 65535) and $BOOTSPLASH_DELTA is the amount to increase the progress counter with on each stat_busy. These values are initialized in rc.sysinit like this:
[ "$BOOTSPLASH_SYSINIT" ] ||
BOOTSPLASH_SYSINIT=`grep -c -e stat_busy -e status /etc/rc.sysinit`
[ "$BOOTSPLASH_LOCAL" ] ||
BOOTSPLASH_LOCAL=`grep -c -e stat_busy -e status /etc/rc.local`
BOOTSPLASH_DAEMONS=`echo ${DAEMONS[@]} | sed 's/![^ ]*//g' | wc -w`
BOOTSPLASH_ALL=$(($BOOTSPLASH_SYSINIT+$BOOTSPLASH_LOCAL+$BOOTSPLASH_DAEMONS))
BOOTSPLASH_DELTA=$((65535/$BOOTSPLASH_ALL))
BOOTSPLASH_PROGRESS=$((65535-$BOOTSPLASH_ALL*$BOOTSPLASH_DELTA))
I put this right before the point where local file systems are mounted, because the progress bar can't be updated before /proc is accessible. Another option is to initialize these variables in the beginning of rc.sysinit to make earlier stat_busy calls get counted, but the updates won't be visible before /proc is mounted anyway.
Because there is no way to export these variables from rc.sysinit to init's environment, rc.multi has to calculate them from scratch. Also the loop that starts daemons has to increase the counter because the daemon scripts can't export the new values. My full rc.multi script looks like this:
. /etc/rc.conf
. /etc/rc.d/functions
[ "$BOOTSPLASH_SYSINIT" ] ||
BOOTSPLASH_SYSINIT=`grep -c -e stat_busy -e status /etc/rc.sysinit`
[ "$BOOTSPLASH_LOCAL" ] ||
BOOTSPLASH_LOCAL=`grep -c -e stat_busy -e status /etc/rc.local`
BOOTSPLASH_DAEMONS=`echo ${DAEMONS[@]} | sed 's/![^ ]*//g' | wc -w`
BOOTSPLASH_DELTA=$((65535/($BOOTSPLASH_SYSINIT+$BOOTSPLASH_LOCAL+$BOOTSPLASH_DAEMONS)))
BOOTSPLASH_PROGRESS=$((65535-($BOOTSPLASH_LOCAL+$BOOTSPLASH_DAEMONS)*$BOOTSPLASH_DELTA))
export BOOTSPLASH_PROGRESS BOOTSPLASH_DELTA
# Start daemons
for daemon in "${DAEMONS[@]}"; do
if [[ `echo $daemon | grep '^[^!]' | wc -l` -eq 1 ]]; then
/etc/rc.d/$daemon start
BOOTSPLASH_PROGRESS=$(($BOOTSPLASH_PROGRESS+$BOOTSPLASH_DELTA))
fi
done
if [ -x /etc/rc.local ]; then
/etc/rc.local
fi
Like I mentioned in my previous post, it's hard to know how many steps the bar is going to need. Especially rc.sysinit is full of conditional stat_busy statements. Therefor I made it possible to specify $BOOTSPLASH_SYSINIT (number of steps in rc.sysinit) in rc.conf. With the current rc.sysinit script this value is calculated as 19, but on my system rc.sysinit only executes 8 of the steps after the point where /proc is mounted.
The code presented here doesn't display text for the different stat_busy calls. I kind of had that working as well, but the texts were written on top of each other (old text wasn't erased) and you had to source the bootsplash-theme to get the text's font and position - it wasn't pretty.
I hope somebody finds this useful, and I might make a bootsplash package that includes the splash utils, an Arch theme and patches for the init scripts.
-bogomipz

Flash 8 .as don't always compile

I've just started using classes with as2 and flash 8.
I have found that the class files don't always compile when I
change one and run my project again, is there something I need to
do, driving me crazy. Very hit and miss.
A good example, is I add a trace to a .as file, it works,
then I change the trace line to display a different variable, save,
run again and it's still displaying the old variable.

You can delete the ASO files to avoid this "cache".
In the Flash 8 menu go to
Control > Delete ASO Files

Restriction to trigger event

Hi all,
I need to implement a workflow to document management. When the employee complete a document, like a contract or some what, it set the status of document to 'Z1' and then trigger the workflow to several managers to approve the document. During the steps of approval, the managers may change the status too, in this situation, I don't want the workflow to be triggered again. So can I restrict the trigger event by some conditions? Only the 'DOCUMENT_CHANGED' event triggered and document status is 'Z1', trigger the workflow, other status, not trigger.
Of course, I can add an condition step to be the first step of workflow to filt the ones whose status is other than 'Z1'. But this will lead to so many waste workflows.

Hi,
Go to transaction SWETYPV, then find your event and workflow. double click on that. You will see the field to put in check function module. You can create a function module with a code to filter only status Z1.
Cheers,
Chaiphon

Will the assignment of image to a parked document trigger event FIPP.Change

Hi All,
We are developing a workflow that has some integration with SAP ArchiveLink. The workflow waits for a scanned image to be assinged before the Parked Document can be released. For this i'm using a wait for event step that waits till the event FIPP.Assigned is raised. And once the event is received the release process is carried out.
Will the assignment of image trigger event FIPP.Changed? If yes, how do I determine whether an image is assigned or not to a Parked Document? Can I determine by looking at the link table TOA01?
Please let me know your thougths.
Thanks,
Mustajab

I would think it will not - but why don't you turn on the event trace (SWELS) and find out (SWEL). Image.Assigned is more likely to be triggered.

Hello, My iCal don't synchronize older events than two or three month ago. How can I do to synchronize all my schedule? In iTunes it's all right in Calendars. I don't put a cross in "synchronize event older than ....... days". Thanks for answer.

Hello, My iCal don't synchronize older events than two or three month ago. How can I do to synchronize all my schedule? In iTunes it's all right in Calendars. I don't put a cross in "synchronize event older than ....... days". Thanks for answer.

Just saw your post. Better late than never. You may want to
consider GameBrix.com, where you can create Flash based, casual
games using your web browser. No downloads are required. You can
create a game from scratch using a library of images, sounds and
game mechanics. You can also upload your own. The online script
editor will allow you to view and edit the ActionScripts associated
with each game mechanic. In short, a great way to ramp up on game
design and build your own game without investing a lot of $
upfront.
BTW I am associated with GameBrix so any feedback is
appreciated.

No "before new record saved" trigger event in workflow definition ?

Hello,
I have following problem: I have to make a simple integration, where products have information about available quantity of given product . Assume we have field - it is called "Available amount" and it tells how many products are on stock. Now suppose we have created an opportunity, and we want to add Opportunity Product Revenue - we're selecting product and then quantity. I want to make OCOD to display message and prevent from adding opportunity product revenue, when its quantity is greater than "Available amount" field which is present in associated product record. I've created small C# application and used workflows to create Integration events. It works - but not exaclty how I want it - when I add a new record the workflow generates integration event - but I'd like to generate integration event before a record is created, also I'd like to show a notification from OCOD. But for "revenue" we do not have a trigger event called for example : "before new record saved" - we have only "when new record saved" and "before modified record saved".

Hi,
From your requirement, it seems you, want some kind of check. Did you try puting this validation on field level, i guess you would need to join fields and compare in field validation. So, whenever user creates a new record this validation kicks and user is notified of the error.

InDesign CC 2014.2 has stopped asking me if I want to save changes when I close a file. It's automatically saving, but I don't always want to save changes.

InDesign CC 2014.2 has stopped asking me if I want to save changes when I close a file. It's automatically saving, but I don't always want to save changes. Can anyone help?

See: Replace Your Preferences

N95 screen lights don't always work

Hi guys just got my nokia replacement but the screen lights don't always work. They work sometimes then go off. Any ideas?
Its not who i am underneath. But what i do that defines me.
You are here for a reason Superman.
"Come to me son of Jor-EL. KNEEL BEFORE ZOD"

When you say it doesn't always work, are there certain steps you can reproduce to make it work (or not as the case may be ?)
The only thing I can suggest is formatting your N95 by using the *#7370# code and NOT restoring any backup and seeing if the problem still happens - if it does you have a hardware fault and you should approach your local Nokia Service Centre.
So far from the v12 firmware thread I don't think anyone has reported the backlight not working as a known problem.
Regards,
Edward

New Folio Issues don't always appear to users ( uninstall required )

I've been getting feedback that iPhone folios don't always appear to users when published publicly...i.e. I publish the latest issue and it appears for many users in the folio library, however some (even though they have an internet connection) do not see the new folio as available.
This has been solved by the user uninstallng and re-installing the app, however that's not an obvious course of action and most users miss available content.
Anyone else have insight into what could be the problem here?
I'm publishing v26 folios through a v26 app, and also I'm not sure this problem is isolated to iPhone.

I have the same problem!
I hope someone can help and find a solution...

Can i write information in file on trigger event.

Dear Experts,
I want ot store information in file on particular Trigger event.
Is it possible? if yes then how?

We can write to files using the UTL_FILE PL/SQL package. Please read the documentation on this: the security model in particular seems to trip up many newcomers.
Cheers, APC

Trigger events are notvalidated the lov form personalization or custom.pll

Hi all,
The trigger events are not validated the LOV in forms personalization or custom.pll
any one help me
Regards,
M.Soundrapandian
Edited by: user588510 on Dec 15, 2008 9:27 PM

i have checked with the new item instance and now i have given
In the message text when i have given this query it is displaying me with blank message box when there are no records which i dont want.and also saving it when i click ok .where should i modify my query so it displays message only when there are more than 3 records but should not save
trigger event : when new item instance
trigger object :repairs.lot_number
condition : :SR.ACCOUNT_NUMBER IS NOT NULL
AND :REPAIRS.SERIAL_NUMBER IS NOT NULL
Message text :
=SELECT 'There are a total of '||COUNT (*)||' Previously Repaired Records' "A" FROM CSD_REPAIRS CR, CS_INCIDENTS_ALL_B CS, CSD_PRODUCT_TRANSACTIONS CP
WHERE (
SELECT COUNT(*)
FROM CSD_REPAIRS CR, CS_INCIDENTS_ALL_B CS, CSD_PRODUCT_TRANSACTIONS CP
WHERE CR.REPAIR_LINE_ID = CP.REPAIR_LINE_ID
AND CR.INCIDENT_ID = CS.INCIDENT_ID
AND CS.ACCOUNT_ID = :SR.ACCOUNT_NUMBER
AND CP.prod_txn_status = 'RECEIVED'
AND CR.STATUS = 'Closed'
AND CP.SOURCE_SERIAL_NUMBER = :REPAIRS.SERIAL_NUMBER)>=3
Edited by: user10755387 on Aug 5, 2009 11:31 PM

Tracking trigger event.

Hello,
Now, I am debugging on my trigger event. So I want to know is there a way to tracking trigger event on log file or table?
a sample of my trigger as follow
create or replace trigger insertInvoicetrigger
after insert on invoice
for each row
begin
update customers set COM_BALANCE = COM_BALANCE + :new.INVOICE_TOTAL where tid = :new.com_id;
end;
/Thank you!

You can create a procedure with AUTONOMOUS_TRANSACTION pragma and do your logging in to table in that and commit. AUTONOMOUS_TRANSACTION pragma ? what is that? I am no knowledge about this, please give me some more information....
set serveroutput on
then
dbms_output.put_line
this should be the easiest way to debugging for me, but can it be works on my programming application (visual basic 6)?
I means run and fire trigger(s) from my app, then show it command prompt or somewhere else?
Thanks
;)

I don't always hear or feel my phone when I'm in my workshop. Is there an app that can ring a bell or flash a light on and off when I receive a call or text?

I don't always hear or feel my phone when I'm in my workshop. Is there an app that can ring a bell or flash a light on and off when I receive a call or text?

There are a number of hardware devices that you may want to look at. Some of them require that the iPhone be placed into a "base station" in order to work. Following is one set of possibilities: http://www.harriscomm.com/index.php/equipment/cell-phones-accessories/cell-phone -accessories/loud-ringers.html
If you do an internet search for something like "ringer for cell phone in home" you will find a variety of others.

Widgets don't always work - help please!

When I open dashboard, all of my widgets appear, however, some of them don't always work. For example, I have two weather widgets for two different cities - sometimes they both show the forecast, sometimes only one, sometimes neither. Furthermore, if I remove the widget and then re-add it, it will then successfully show the forecast. If I click the little "i" and resubmit the city, it still fails. I must reload the widget for it to work. The same goes for my ESPN widgets. Sometimes they retrieve scores, and other times they are "unable," but work just fine if I close them and reopen them. Some more widgets I have problems with occasionally are the ski report, stock report, as well as my family guy quote widget. It really seems rather random when they will and won't work. How can I fix this?
i tried repairing disk permission as well as deleting the widget files in the library/preferences folder, but the same problem still occurs.

Hi Michael, have you tried navigating to ~(yourhome)/Library/Preferences and deleting the "widget-com.apple.widget.worldclock.plist" and others you are experiencing issues with? Log out and back, in or restart, then relaunch widgets and test.
-mj
[email protected]

AS2: cuePoints don't always trigger events

Similar Messages

Maybe you are looking for