AS3.0: Can't add child and access subchildren timelines?

I have the following code:
var myParent:Parent = new Parent();
var mySymbol_01:Symbol01 = new Symbol01();
var mySymbol_02:Symbol02 = new Symbol02();
myParent.x=100;
myParent.y=100;
addChild(myParent);
myParent.gotoAndStop(1);
button.addEventListener(MouseEvent.CLICK, buttonPressed);
function buttonPressed(e:Event):void{
removeChild(myParent);
playCopy();
function playCopy():void{
addChild(myParent);
myParent.gotoAndPlay(2);
myParent.x=100;
myParent.y=100;
//myParent.rects.width=200;
//myParent.circ.width=300;
If I take
//myParent.rects.width=200;
//myParent.circ.width=300;
and remove the comments, the file breaks and no Movie Clips appear on the stage.  Does this have to do with casting the Children as Movie Clips, which I may not have done here?

No error codes Ned, it just adds the Child at the last frame in the timeline which happens to be frame 60 (I have a
n animation in the y direction just for kicks to see if I can get the animation to play and have the object move down
ward vertically but it just "pops" into place without any animation.
And no, it's not a sound animation.

Similar Messages

  • After upgrade my Iphone 4 to iso5, I can't add contact and I can't access the settings for mail,contacts and calender. The moment I select the setting for Mails, Contact and Calender it will jump back to home. Can someone advice what's wrong with it?

    After upgrade my Iphone 4 to iso5, I can't add contact and I can't access the settings for mail,contacts and calender. The moment I select the setting for Mails, Contact and Calender it will jump back to home. Can someone advice what's wrong with it?Problr

    Dear All
    i have done the same activity ( buy a new iphone 4 -> upgrade to ios5 - > configure email) with success-
    than when i start to move the contacts from old mobile to iphone (using the microsim) i receive the same crash
    in disgnosis e use i saw 2 dump with this title 'latestCrash-Preferences.plist and LatestCrash.plist. in each file the date is the same and i read:
    Exception Tyle: EXC_CRASH (SIGABRT)
    Exception code: 0x00000000, 0x00000000
    Chrashed Thread: 6
    in thread 6: name: Dispatch queue:
    com.apple.addressBookUI.ContactsSettingPlugin
    and thaan a lot of data.
    Have you any idea?
    thank in advance
    Fabio

  • HT5439 i can't access my university anyway, how can i add username and password?

    i try to use this solution to apply my university proxy, but it dodn't work. Can u suggest me more about how can i add username and password?

    You should be able to use the OpenVPN Connect app running on your iPad to connect your iPad to the VPN directly. It is an official OpenVPN client for iOS devices.
    In what way is it "not compatible"? Have you tried it? Tunnelblick is an OpenVPN client, so your school's VPN is using the OpenVPN protocol. That means any OpenVPN client should be able to access it. (It is possible, but unlikely, that your school uses encryption that is not available on the iPad, but that would be very unusual.)
    Otherwise, a remote control app on your iPad would let you control your Mac at home. "Back to My Mac", for example, would allow you to control your Mac remotely. The tricky part of this is that usually a VPN is set up to send all Internet traffic via the VPN server, and I'm not sure how that would work with "Back to My Mac".

  • How can i add an administrator access so the admin can edit his webpage on the web browser?

    How can i add an administrator access so the admin can edit his webpage on the web browser?

    A content management system or CMS is software usually on the server that allows client's to log-in and edit content from any web browser with an internet connection.  These web pages are typically built with server-side programming (PHP) and databases (MySql). 
    CMSs come big and small.  The right one for your project depends on
         a) your programming skills,
         b) project requirements,
         c) budget.
    COMMERCIAL CMSs:
    Cushy CMS (watch the video to see how it works)
    No PHP or databases required.  Editing is performed on their web site.
    http://www.cushycms.com
    Perch ($59 license per site)
    PHP & MySql required
    http://grabaperch.com/
    WebAssist Power CMS Builder - Extension for DW
    PHP & MySql required
    http://www.webassist.com/dreamweaver-extensions/powercms-builder/
    Adobe Business Catalyst (full subscription includes CMS & web hosting)
    http://www.businesscatalyst.com/
    OPEN SOURCE CMSs:
    Get Simple CMS
    PHP & XML required.
    http://get-simple.info/
    e107 CMS
    PHP & MySql required
    http://e107.org/
    WordPress
    PHP & MySql required
    http://wordpress.org
    Joomla!
    PHP & MySql required
    http://joomla.com
    Drupal
    PHP & MySql required
    http://drupal.com
    Concrete 5
    PHP & MySql required
    http://www.concrete5.org/
    Nancy O.

  • 1) I have multiple accounts at the iTunes store and none are now associated with my purchases...I think because passwords have been associated with various id's and I can't log in and access those purchases.  I want to get back to being able to use one i

    1) I have multiple accounts at the iTunes store and none are now associated with my purchases...I think because passwords have been associated with various id’s and I can’t log in and access those purchases.  I want to get back to being able to use one id and password and be able to access those purchases.
    2) When I upgraded my iPhone 3gs, to the latest version 5.0.1 (9A405), is when I noticed that i couldn’t update my applications.  There are two names/accounts on the phone and prior to the update there was just the one.  I have tried entering every conceivable password that I have ever used and get the incorrect password error every time. The apps on the iPhone are apparently associated with several/different accounts.  I just want to get everything back to the way it was.  One id and one password with purchases associated with just one account that can be updated on my computer as well as my iPhone.

    Hello sadiepix,
    The following article details several things that can be done to quell iTunes' constant need for authorization.
    iTunes repeatedly prompts to authorize computer to play iTunes Store purchases
    http://support.apple.com/kb/TS1389
    Cheers,
    Allen

  • I don't have a wireless keyboard or mouse for my 2007 iMac, is there any way that can use remote desktop and access it from my 2010mbp.

    i don't have a wireless keyboard or mouse for my 2007 iMac, is there any way that can use remote desktop and access it from my 2010mbp

    Hi champrider,
    You can use an application such as Apple Remote Desktop to control your iMac remotely. See this article -
    OS X Mavericks: Allow access using Apple Remote Desktop
    This help page will provide you with some other useful resources for Apple Remote Desktop -
    Remote Desktop Help
    Thanks for using Apple Support Communities.
    Best,
    Brett L 

  • How can I add 'AlternateSpace' and 'AlternateColorValue' to my IDML in InDesign?

    how can I add 'AlternateSpace' and 'AlternateColorValue' to my IDML in InDesign?
    I have a document and colors (CMYK) but need also RGB values to display on the web.
    In IDML in Resources/Graphic.xml in each Color are attributes 'AlternateSpace' and 'AlternateColorValue'.
    How can I set this in InDesign?

    I cannot follow you exactly…
    Do you mean you are using the IDML in a further process for Web Design? Translating the IDML to HTML or something?
    And now, you need the alternate information for doing the RGB representation of some or all the colors?
    InDesign itself does not provide an interface to that.
    Nor does scripting.
    However, you could change the values in an IDML or IDMS file by editing the file(s):
    AlternateSpace="NoAlternateColor" to: AlternateSpace="RGB"
    AlternateColorValue"" to: AlternateColorValue"0 144 54"  (a green one)
    Here a tabular overview of the properties of a color exported with a colored rectangle as IDMS file:
    <
        Color Self="Color/GREEN1-Process"
        Model="Process"
        Space="CMYK"
        ColorValue="100 0 100 0"
        ColorOverride="Normal"
        AlternateSpace="NoAlternateColor"
        AlternateColorValue=""
        Name="GREEN1-Process"
        ColorEditable="true"
        ColorRemovable="true"
        Visible="true"
        SwatchCreatorID="7937"
    />
    If you'll import the edited IDMS file in a new document and export again as IDML or IDMS, the changed values will persist.
    Don't know, if that goes in the right direction for you. I'm guessing here a lot…
    Uwe
    Message was edited by: Laubender

  • How can I add Mail and Notes to my existing iCloud account?

    How can I add Mail and Notes to my existing iCloud account?

    YesI am using another kinfd of email - becuse calendar was working via ic;oud I hadn't created seperate icloud email.
    Taken your suggestion and created email account and activated Notes too.
    Just testing it out - seems to work
    Many thanks

  • Can I add Users and/or Groups?

    Hi,
    Can I add Users and/or Groups in a Realm from my webapplication?
    (not using administrative console....but from my code)
    Tanks by
    Angelo.

    Yes.
    "Angelo" <[email protected]> wrote:
    >
    Hi,
    Can I add Users and/or Groups in a Realm from my webapplication?
    (not using administrative console....but from my code)
    Tanks by
    Angelo.

  • I have an iMac 5,1 with an Intel Core 2 Duo. I'd like to be able to use iCloud, but need Lion which is too big. How much memory can I add? And will this upgrade allow me to install Lion?

    I have an iMac 5,1 with an Intel Core 2 Duo. I'd like to Lion, in order to use iCloud, but the specs indicate I don't have enough memory. How much memory can I add? And will this upgrade allow me to install Lion?

    I believe your model iMac can address 3 GB RAM; the minimum for Lion is 2 GB - however, that is an absolute minimum for very light use. You would be much happier with a minimum of 4 GB.
    http://www.everymac.com/systems/apple/imac/stats/imac-core-2-duo-2.16-20-inch-sp ecs.html
    (You can install 4 GB, but it will only be able to address about 3.1 - 3.2 GB)

  • In FCP7 multicam can I add titles and additional video layers?

    In FCP7 multicam can I add titles and additional video layers?

    Thanks Shane,
    Is it OK to add the video layers while I an still cutting the multicam or do i need to wait until its done?
    I've played around a little and see that it is possible without disturbing the multicam's, but I'm very wary of screwing it up if I do a lot of it.

  • Target movieclip from an AS3 class file - remove/add Child

    Halo.
    I have a very simple question  (for those who use external class files).
    Assuming that I have a MovieClip manually added to Stage and I want to access it from inside my class definiton.
    So the code would be:
    MovieClip(root).MyMovieClip
    But I can't figure out how to use remove/add Child in that kind of situation.
    I will appreciate any advice.
    Thanks

    if you can reference using that, you can remove using:
    MovieClip(root).MyMovieClip.parent.removeChild(MovieClip(root).MyMovieClip);
    and you can add to any displayobjectcontainer.

  • Views in MM03, how can I add fields and changes fields labels

    Hi !!
      I need to change some labels that appear on Sales: Sales Org  2 (view on MM03, MM02..MM01)...
       Im not sure what I can do this.. Im an ABAP Programmer(beginner) and I know how I can change labels of fields in programs(reports) that I did...but in This case. I don't know what I can do...
       example: when I enter on MM03..I select differents views(including Sales: Sales Org  2), later I specify  sales Org and distribution Channel (I need to specify this information for see these fields on this TAB Sales: Sales Org  2).
      When I access in tab: Sales: Sales Org  2, I can see one Group that it's called
    Material Groups that contain two fields called MVKE.MVGR1 AND MVKE.MVGR5... I saw in the screen these fields with the description from each field..example:  Material Group 1 (MVKE.MVGR1 )... I would like to know :
    1.- How Can I change the description Material Group 1 (in this screen) by other description (example: material test)...
    2.- How can I add more fields in this group...example..If I need to add MVKE.MVGR2 ..??
      I will appreciate your help!!! 
      I will give you points for your answer
    Alice

    Hi Alice,
    And do I need to change in this section too.... SPRO -> SAP Reference IMG -> Logistics general -> Material master -> configuring the material master -> ...
    If I need to add some values???
    After you made label changes on custom screen then you need to go configuration (Define Structure of Data Screens for Each Screen Sequence) to replace the standard SAP screen with custom screen. You can also do testing for custom subscreen as well.  Give it try.
    And how about If I move this screen??...is it dangerous??...or how can I know if this screen affect other section of programs?
    I do not understand your questions. Can you elaborate more?
    Regards,
    Ferry Lianto

  • How can someone add servers and computers to a separate domain in a separate forest without having permissions to the other forest?

    Hello Community
        On an existing network I added separate domain in a separate forest using WS2012.
        Lets call it "MyDomain" and "MyForest" on WS2012.
        In MyDomain and MyForest I am the only domain administrator.
        The problem is if you go to "File Explorer" and click on "Network" in MyDomain in MyForest,
    I see that other server administrators have added their servers and workstations to
    MyDomain in MyForest but I never added them as users or administrators to my domain in my forest.
        So the question is how can a someone from a separate domain in
    a separate forest add servers and computers to MyDomain in Myforest
    when I haven't added them as user or administrators or given them
    any permission in MyDomain in MyForest?
        Thank you
        Shabeaut

    Using the network in file explorer, this shows machines that the computer has automatically detected using built in Microsoft processes. All this means is that you have other computers on the same physical network as yourself. These are no necessarily part
    of your domain. If the machines are set to respond, then so long as they receive a discovery request from your PC they will respond and populate that list. This does not mean they are part of your domain, or that they have access to any of your computers (
    apart from low level stuff like ping which does not rely on domain membership.)
    Apart from a Domain Admin, the only other people who can make changes to your domain are whoever is an Enterprise Admins. Domain Admins have control over their domains but Enterprise Admin have full permissions to the entire Active Directory infrastructure,
    no matter which forest or domain it is.

  • How can multiple users edit and access same ACCESS file

    Hello,
    We have 2 access files and multiple users needs to edit and access those files.
    How can I enable mulitple access but only one user can edit rest of users are in read-only mode for one file and multiple access and edit on the another file.

    Hi,
    You should split your database in a front and backend. Then create two seperate front ends which you can distribute. If you need readonly you can opt for two options, setting the attributes of the file to read only or create a front end with read only forms.
    The last one takes a little more work but is safer than setting the attributes to read only because people can change that back themselfs.
    Maurice

Maybe you are looking for

  • Assets Write-Ups ABZU

    Hi, I want to post assets write up with $ 5000 and want this to affect the NBV. What is happening is that some of the amount get caught into ordinary depreciation so ultimate impact is just $ 4000.00. This way my depreciation for the year is increase

  • Re: Issue with rdcmndGotoSlide command

    Hey AjitD! Did you came up with a solution for this? I'm stuck with the same problem (as there are always new bugs to explore in captivate ...)! Would be nice! Regards Chris

  • FAGSLKF in ECC6.0 - NewGL

    In ECC6.0 - NewGL, I'm trying to insert a new layout FAGSLKF. Because I'd like insert Statistical Key Figure values for each combinations of dimensions. How can I make it? Can I insert a custom field like dimension??? Let me know, thank you.

  • Reading file content using Javascript

    Hi Friends, is it possibel to read the contents of the child window opened from a javascript.for example am opening a window using Window.open function in javascript, after opening the window can i read the contents ?If so how can anyone help in this

  • Error 213:5 can't open any Adobe Application

    When I try opening for example Illustrator, I get an error which says "A problem has occurred with the licensing of this product. Restart..." On the internet I found that I should restore some things in the SLStore folder, but this folder is missing!