ASA5525X - 8.6(1)2 and One-To-One Static Mapping Issue

Question

Just started working with the post 8.3 CLI.
Traffic from outside to inside is translated correctly, but inside to outside is using the outside Interface IP instead of the mapped IP, 50.50.50.50.
I know I'm missing something small here.
This is the config that was build using ASDM.
Outside IP: 50.50.50.50
Inside IP: 10.10.10.10
object network TEST
host 50.50.50.50
description One-To-One NAT 50.50.50.50/10.10.10.10
object network TEST-priv
host 10.10.10.10
description One-To-One NAT 50.50.50.50/10.10.10.10
object network TEST-priv
nat (inside,outside) static TEST
nat (inside,outside) source dynamic IN2OUT interface description PAT Overload Using Interface Public IP
object network IN2OUT
subnet 0.0.0.0 0.0.0.0
description Inside To Outside NAT
Note: ASDM created object TEST-priv twice. One on top and one below the NAT configs.

Answer 1

Hello Robert,
The problem here is the nat order.
Twice nat are review first so in order to make this work do the following on the CLI.
no nat (inside,outside) source dynamic IN2OUT interface description PAT Overload Using Interface Public IP
nat (inside,outside) after-auto source dynamic IN2OUT interface description PAT Overload Using Interface Public IP
Remember to rate all of the answers, for the community that is more important that a thank
Regards,
Julio