Ascii Backup: Writing block
Hello,
We are exporting data out of Hyperion Planning/Essbase into a flat text file. However we are experiencing the error: Ascii Backup: Writing block that is preventing this extraction to occur. Is anyone familiar with this error and can give me some direction on how to fix it?
Thank you,
Eric
Sounds like there are other process running against the cube while you are trying to do your backup. Some Planning user running a Business Rule while you are trying to do the backup?
Similar Messages
-
ORA-01114: IO error writing block
What is the best way to recover from error :
Wed Nov 22 21:44:01 2006
Errors in file c:\oracle\admin\orcl\bdump\orcl_dbw0_3932.trc:
ORA-01242: data file suffered media failure: database in NOARCHIVELOG mode
ORA-01114: IO error writing block to file 65 (block # 260237)
ORA-01110: data file 65: 'C:\ORADATA\ORCL\RG_IDX_16.ORA'
ORA-27072: skgfdisp: I/O error
OSD-04008: WriteFile() failure, unable to write to file
O/S-Error: (OS 1) Incorrect function.
DBW0: terminating instance due to error 1242
Instance terminated by DBW0, pid = 3932The basic meaning of this error stack is DB writer is unable to write to the mentioned datafile. There could be logical or physical corruption (hardware failure) or another process blocks this datafile. In the latter case the problem should be temporarily,
1) shutdown the database
2) run chkdsk (to check for disk failures)
3) startup the database
If the error persists you have to restore/recover from a backup. Since the database is running in noarchivelog mode this can only be done from a cold backup, which means probably loss of data.
Werner -
Why i am getting this error durint RAC DB Creation using dbca -datafileDestination /var/opt/oracle/oradata/orcl
I cheek the directory and i am seeing 3 control files created in it. Out put of my alert.log file
Any idea?
=================================================
Starting ORACLE instance (normal)
Sun Apr 11 12:07:59 2004
Global Enqueue Service Resources = 64, pool = 1
Sun Apr 11 12:07:59 2004
Global Enqueue Service Enqueues = 128
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
GES IPC: Receivers 1 Senders 1
GES IPC: Buffers Receive 1000 Send 530 Reserve 300
GES IPC: Msg Size Regular 396 Batch 2048
SCN scheme 2
Using log_archive_dest parameter default value
LICENSE_MAX_USERS = 0
SYS auditing is disabled
Starting up ORACLE RDBMS Version: 9.2.0.4.0.
System parameters with non-default values:
processes = 150
timed_statistics = TRUE
shared_pool_size = 150994944
large_pool_size = 33554432
java_pool_size = 16777216
control_files = /var/opt/oracle/oradata/orcl/control01.ctl, /var/opt/oracle/oradata/orcl/control02.ctl, /var/opt/oracle/oradata/orcl/control03.ctl
db_block_size = 8192
db_cache_size = 50331648
compatible = 9.2.0.0.0
db_file_multiblock_read_count= 16
cluster_database_instances= 1
thread = 1
fast_start_mttr_target = 300
instance_number = 1
undo_management = AUTO
undo_tablespace = UNDOTBS1
undo_retention = 10800
remote_login_passwordfile= EXCLUSIVE
db_domain =
instance_name = orcl
local_listener = LISTENER_ORCL1
remote_listener = LISTENERS_ORCL
hash_join_enabled = TRUE
background_dump_dest = /ora01/oracle/admin/orcl/bdump
user_dump_dest = /ora01/oracle/admin/orcl/udump
core_dump_dest = /ora01/oracle/admin/orcl/cdump
sort_area_size = 524288
db_name = orcl
open_cursors = 300
star_transformation_enabled= FALSE
query_rewrite_enabled = FALSE
pga_aggregate_target = 60817408
Sun Apr 11 12:07:59 2004
cluster interconnect IPC version:Oracle UDP/IP
IPC Vendor 1 proto 2 Version 1.0
PMON started with pid=2
DIAG started with pid=3
LMON started with pid=4
LMD0 started with pid=5
DBW0 started with pid=6
LGWR started with pid=7
CKPT started with pid=8
SMON started with pid=9
RECO started with pid=10
Sun Apr 11 12:08:02 2004
CREATE DATABASE orcl
MAXINSTANCES 32
MAXLOGHISTORY 0
MAXLOGFILES 192
MAXLOGMEMBERS 3
MAXDATAFILES 1024
DATAFILE '/var/opt/oracle/oradata/orcl/orcl/system01.dbf' SIZE 250M REUSE AUTOEXTEND ON NEXT 10240K MAXSIZE UNLIMITED
EXTENT MANAGEMENT LOCAL
DEFAULT TEMPORARY TABLESPACE TEMP TEMPFILE '/var/opt/oracle/oradata/orcl/orcl/temp01.dbf' SIZE 40M REUSE AUTOEXTEND ON NEXT 640K MAXSIZE UNLIMITED
UNDO TABLESPACE "UNDOTBS1" DATAFILE '/var/opt/oracle/oradata/orcl/orcl/undotbs01.dbf' SIZE 20M REUSE AUTOEXTEND ON NEXT 5120K MAXSIZE UNLIMITED
CHARACTER SET WE8ISO8859P1
NATIONAL CHARACTER SET AL16UTF16
LOGFILE GROUP 1 ('/var/opt/oracle/oradata/orcl/orcl/redo01.log') SIZE 5M REUSE,
GROUP 2 ('/var/opt/oracle/oradata/orcl/orcl/redo02.log') SIZE 5M REUSE
Sun Apr 11 12:08:02 2004
lmon registered with NM - instance id 1 (internal mem no 0)
Sun Apr 11 12:08:03 2004
Reconfiguration started
List of nodes: 0,
Global Resource Directory frozen
one node partition
Communication channels reestablished
Master broadcasted resource hash value bitmaps
Non-local Process blocks cleaned out
Resources and enqueues cleaned out
Resources remastered 0
set master node info
Submitted all remote-enqueue requests
Update rdomain variables
Dwn-cvts replayed, VALBLKs dubious
All grantable enqueues granted
0 GCS shadows traversed, 0 replayed, 0 unopened
Submitted all GCS remote-cache requests
Sun Apr 11 12:08:03 2004
Reconfiguration complete
Post SMON to start 1st pass IR
Sun Apr 11 12:08:24 2004
Database mounted in Exclusive Mode.
Sun Apr 11 12:08:35 2004
Successful mount of redo thread 1, with mount id 1051001763.
Assigning activation ID 1051001763 (0x3ea503a3)
Thread 1 opened at log sequence 1
Current log# 1 seq# 1 mem# 0: /var/opt/oracle/oradata/orcl/orcl/redo01.log
Successful open of redo thread 1.
Sun Apr 11 12:08:38 2004
SMON: enabling cache recovery
Sun Apr 11 12:08:38 2004
WARNING: Default passwords for SYS and SYSTEM will be used.
Please change the passwords.
Sun Apr 11 12:08:38 2004
create tablespace SYSTEM datafile '/var/opt/oracle/oradata/orcl/orcl/system01.dbf' SIZE 250M REUSE AUTOEXTEND ON NEXT 10240K MAXSIZE UNLIMITED
EXTENT MANAGEMENT LOCAL online
Sun Apr 11 12:10:08 2004
Errors in file /ora01/oracle/admin/orcl/bdump/orcl1_ckpt_16649.trc:
ORA-00206: error in writing (block 3, # blocks 1) of controlfile
ORA-00202: controlfile: '/var/opt/oracle/oradata/orcl/control03.ctl'
ORA-27072: skgfdisp: I/O error
Linux Error: 5: Input/output error
Additional information: 2
ORA-00206: error in writing (block 3, # blocks 1) of controlfile
ORA-00202: controlfile: '/var/opt/oracle/oradata/orcl/control01.ctl'
ORA-27072: skgfdisp: I/O error
Linux Error: 5: Input/output error
Additional information: 2
Sun Apr 11 12:10:08 2004
Errors in file /ora01/oracle/admin/orcl/bdump/orcl1_ckpt_16649.trc:
ORA-00221: error on write to controlfile
ORA-00206: error in writing (block 3, # blocks 1) of controlfile
ORA-00202: controlfile: '/var/opt/oracle/oradata/orcl/control03.ctl'
ORA-27072: skgfdisp: I/O error
Linux Error: 5: Input/output error
Additional information: 2
ORA-00206: error in writing (block 3, # blocks 1) of controlfile
ORA-00202: controlfile: '/var/opt/oracle/oradata/orcl/control01.ctl'
ORA-27072: skgfdisp: I/O error
Linux Error: 5: Input/output error
Additional information: 2
Sun Apr 11 12:10:08 2004
CKPT: terminating instance due to error 221
Sun Apr 11 12:10:09 2004
System state dump is made for local instance
Sun Apr 11 12:10:09 2004
Trace dumping is performing id=[cdmp_20040411121009]
Sun Apr 11 12:10:13 2004
Instance terminated by CKPT, pid = 16649
=================================================dear karan & all
i have copied "control file" from another location but now it generate an error
SQL> startup
ORACLE instance started.
Total System Global Area 557842432 bytes
Fixed Size 1250140 bytes
Variable Size 289410212 bytes
Database Buffers 264241152 bytes
Redo Buffers 2940928 bytes
ORA-00211: control file does not match previous control files
ORA-00202: control file: 'F:\ORACLE\IDS\SAPDATA1\CNTRL\CNTRLIDS.DBF'
SQL>
now tell me what can i do
regard -
hi
When I run report in rsrt it is throwing me following error..
Messages:
ORA-01114: IO error writing block to file (block # )
SQL Error: 1114
Error while reading data; navigation is possible
>> Row: 71 Inc: NEXT_PACKAGE Prog: CL_SQL_RESULT_SET
we have tried all the options
increased the table space of temp files but still the issue is not resolved
one thing we have observed is
1 case which we are seeing (not sure if this is only because of the below case)
we see this error specifically when we run query on our infocube ZWBS_C11 (CUSTOMIZED CUBE) which has MANDATORY VARIABLE ON 0PROJECT
do this variable has anything to do with the error..
because in other cases where we have like 5 reports on same infocube..
we dont see this error in other 2 cases where we dont have this mandatory variable on project
also we see this error in several other cases like when we are doing compression of info cube zic_c03
absolutely no clue of why this is happening..and when this is happening
RegardsHi,
This issue is related Oracle database issue, check with Basis/Dba team. Oce they resolved you can run the report with selections.
If you know the table name you can check in SE14 (Data base Utility) and adjust the table. Some times it will work out.
Hope it helps you.
Riyez -
ORA-01114: IO error writing block to file
I am trying to create an index on a RAC database. I have tried this in two different schemas with two different tablespaces. I am not getting the standard "unable to extend segment" when you are out of space. I get:
Tried creating an index:
ERROR at line 1:
ORA-00603: ORACLE server session terminated by fatal error
I actually lose connection to the database.
I checked udump and I get:
ksedmp: internal or fatal error
ORA-01114: IO error writing block to file 500 (block # 625225)
ORA-27072: File I/O error
Linux-x86_64 Error: 28: No space left on device
Additional information: 4
Additional information: 625225)
Additional information: -1
1. I have 525 GBs of free space in one of my tablespace which is plenty
2. I was able to create a new table and copy the data from the existing table. Just getting the problem with creating indexes.
I do not have a file_id 500, so I guess that is an OS file number.Hi,
Your temporary tablespaces datafiles are ok? sometimes this kind of errors arise from those files:
1) Index creation , implies sorting ...therefore temporary usage
2) Cannot find the file number within dba_data_files
The (possible) reason for this, resides at the way temporary datafiles are structured: they don't allocate all disk space at creation time, like other datafiles.
For instance, you have a filesystem with 300Mb free, and you declared a 200Mb temporary datafile, check if it will have 100Mb or 300Mb freespace (Unix bdf/Linux df -k)? ... it's puzzling... if you later redefine size for temporary , adding 150Mb , the database will allow you to do that... cause it's not allocating the space, it will use the space when temporary space is required, and you'll be in troubles passing the 300Mb barrier... just at 300 Mb + 512bytes you're out of space.
Regards
Ignacio
http://oracledisect.blogspot.com -
ORA-01114: IO error writing block to file %s (block # %s)
One of my large query (has a large amount of sort) fails with the following error.
ORA-01114: IO error writing block to file %s (block # %s).
Uses Oracle 9.2 on windows 2000 server. The size of the TEMPORARY file increases and stops at 4.2 GB. This was the default TEMP file created by oracle at the time of installation. I have another 10GB of free space available on this drive (where the TEMP file exists). Information in DBA_TEMP_FILES table is given below.
Thanks in advance for helps.
Paul.
FILE_ID TABLESPACE_NAME BYTES BLOCKS STATUS RELATIVE_FNO AUT MAXBYTES MAXBLOCKS INCREMENT_BY USER_BYTES USER_BLOCKS
1 TEMP 4294967296 524288 AVAILABLE 1 YES 34359721984 4194302 1 4293918720 524160Filesystem 1k-blocks Used Available Use% Mounted on
/dev/sda2 4127108 200124 3717336 6% /
/dev/sda1 46636 14166 30062 33% /boot
none 513884 0 513884 0% /dev/shm
/dev/sda3 11052880 5697800 4793612 55% /usr
/dev/sda6 256667 37742 205673 16% /var
/dev/sdb1 35001508 33223516 0 100% /u01
/dev/sdc1 35001508 137340 33086176 1% /u02
/dev/sdd1 35001508 19748484 13475032 60% /u03
/dev/sde1 35001508 32844 33190672 1% /u04
In the /u01 are temp01.dbf (11.039.416.320) and undotbs01.dbf (2.422.218.752) located. Can I delete or truncate the temp01 file to make space on the device or not? -
IO error writing block to file (Apex 4.01, 11gR2, RH 64 bit & Using Gatew
I have Apex 4.01 running on a Linux Red Hat 64 bit server and the database is 11gR2. I'm using the gateway and receiving numerous io errors on files that do not exist in the database. Has any one else experienced this? Should I scrape the gateway and load https ?
File 201 does not exists in the database (error below). I have verified this the files do not exists using ( dba_data_files or dba_temp_files) . Is this a Gateway issue?
I have run dbverify and there are not corruptions within in the database. We have run a disk check on the SAN and there are not issues either.
Example of Error:
===========
</msg>
<msg time='2010-11-09T16:18:25.446-06:00' org_id='oracle' comp_id='rdbms'
client_id='ADMIN:1753485708135952' type='UNKNOWN' level='16'
host_id='houlnxora01d.nblenergy.com' host_addr='10.10.200.26' module='APEX:APPLICATION 4500'
pid='26431'>
<txt>Errors in file /u01/app/oracle/diag/rdbms/bdapx01d/bdapx01d/trace/bdapx01d_s000_26431.trc:
ORA-01114: IO error writing block to file 201 (block # 36609)
ORA-27072: File I/O error
Linux-x86_64 Error: 9: Bad file descriptor
Additional information: 4
Additional information: 36609
Additional information: -1
</txt>
</msg>Hello,
I think this is a database-related problem which also occurs when using APEX, but I don't think it's caused by APEX.
The error basically says that something is wrong with your filesystem.
I suggest you post this error description to the forum where the experienced dbas could help you more: {forum:id=61}
From what I know, these errors may occur when your filesystem is full or the file was deleted/moved or set offline for some other reason.
You could get a hint for troubleshooting by locating the file on your filesystem:
select file_name
from dba_data_files
where file_id=201;If it actually doesn't exist, something has messed up your data dictionary. You could then try to find out which tablespace and object/s have a hold on that file:
select
owner,
tablespace_name,
segment_type,
segment_name
from
dba_extents
where
file_id = 201
and
block_id = 36609;I hope it's just the "disk full"-case.
-Udo -
ORA-01114: IO error writing block to file 101 (block # 376038) in create in
Hi
I have srange problem with create index
I have database 10.2.0.4 on HPUX
I tried to create index :
CREATE INDEX "MIGRACE"."R111800_IX1" ON "MIGRACE"."R111800" ("SPARTE", "KONR")
5 TABLESPACE "MIGR" ;
ORA-01114: IO error writing block to file 101 (block # 376038)
ORA-27072: File I/O error
HPUX-ia64 Error: 5: I/O error
Additional information: 4
Additional information: 376038
Additional information: -1
ORA-01114: IO error writing block to file 101 (block # 376038)
table "MIGRACE"."R111800" is ok , is readable and doesn't have any LOB
SPARTE VARCHAR2(4)
KTONR VARCHAR2(11)
SUBNR VARCHAR2(1)
TXTGRP VARCHAR2(8)
PRODMON VARCHAR2(6)
WERT NUMBER(13,2)
I don't have in database file number 101 , all datafile are noextensible , can You help me where could be peoblwm ?
Thank You
Branobranislav.dobrotka wrote:
Hi
I have srange problem with create index
I have database 10.2.0.4 on HPUX
I tried to create index :
CREATE INDEX "MIGRACE"."R111800_IX1" ON "MIGRACE"."R111800" ("SPARTE", "KONR")
5 TABLESPACE "MIGR" ;
ORA-01114: IO error writing block to file 101 (block # 376038)
ORA-27072: File I/O error
HPUX-ia64 Error: 5: I/O error
Additional information: 4
Additional information: 376038
Additional information: -1
ORA-01114: IO error writing block to file 101 (block # 376038)
table "MIGRACE"."R111800" is ok , is readable and doesn't have any LOB
SPARTE VARCHAR2(4)
KTONR VARCHAR2(11)
SUBNR VARCHAR2(1)
TXTGRP VARCHAR2(8)
PRODMON VARCHAR2(6)
WERT NUMBER(13,2)
I don't have in database file number 101 , all datafile are noextensible , can You help me where could be peoblwm ?
Thank You
BranoOracle is victim; not culprit.
OS error.
is disk volume full?
any clues in OS messages file? -
Sign on problems within Elements 10; plus cannot backup, writing files error with file catalog.pse10db. No indication what the problem is. How do I get adobe help with these problems?
Sign on problems within Elements 10; plus cannot backup, writing files error with file catalog.pse10db. No indication what the problem is. How do I get adobe help with these problems?
-
Export Data - Error: 1005000 Ascii Backup
I'm attempting to export data from a Dbase to a folder on my C: Drive, have tried both MAXL and EAS but am receiving following message<BR><BR>"Error: 1005000 ASCII Backup: Failed to open [C:\PlanningUploads\ExportFile\ExportRes.txt]."<BR><BR>Never done this before, so would appreciate advice.<BR><BR>Many Tanks<BR>David<BR>
You should export to a folder on the Essbase server. You can then copy to a folder on your C drive if you wish.
-
TS3992 the iCloud backup window blocks access to my mini iPad, what to do?
The iCloud backup window blocks access to my mini iPad, what to do?
Previous posters on different threads to same issue stated that resetting iPad by simultaneously holding down Sleep and Home buttons for 10 seconds will initiate a hardware reset (ignore the slider to shutdown) and clear the issue.
Prior to upgrading my iPad to 6.1.2, it went into the same iPad bricking modal dialog. Apple has an OS issue that needs to be resolved. User's shouldn't have to restart their iPad because of an iCloud backup timer. I couldn't use my iPad for a week on vacation because of this error and I didn't know the reset trick. -
How reman backup the blocks being written from memory to disk
Hi All,
I am thinking about one case when backuping the datafiles with RMAN.
That is the rman is about to backup block A when this block is being written by DBWR from memory to disk.
Let's assume the writing is just partially done. What will RMAN do in this case?
1. Wait until the writing is done and back it up
2. Backup what RMAN sees at that time
I am just wondering whether the choice 2 will leave the block inconsistent and so be taken as corrupt when restored.
Best regards,
Leonuser12064076 wrote:
Hi All,
I am thinking about one case when backuping the datafiles with RMAN.
That is the rman is about to backup block A when this block is being written by DBWR from memory to disk.
Let's assume the writing is just partially done. What will RMAN do in this case?
1. Wait until the writing is done and back it up
2. Backup what RMAN sees at that time
I am just wondering whether the choice 2 will leave the block inconsistent and so be taken as corrupt when restored.
Best regards,
LeonHi Leon
That's why if you don't take backup of archived redo log file that was generated after the full backup, the backup is considered "inconsistent". If you use "backup database plus archivelog" command, this means that after backing up the database, RMAN switches redo log files and archives it to make the whole backup "consistent"
Kamran Agayev A.
Oracle ACE
http://kamranagayev.com -
How I can begin to start on self learning basis PL/SQL I mean writing block
Could you please let me know about how One can get the expertise and start on self learning basis PL/SQL procedural on which actually HTML DB is written
I am very much interested in learinig this language please provide me any useful link books online material in a proper way.
Thanks in advancewww.google.com.
You'll find plenty of resources about pl/sql. -
How do you include the actual CLOB value as ASCII when writing XML?
When using the XDK for PL/SQL ( creating XML from query ) and the table that you query has a CLOB column the value in the resulting XML document is
written as:
<column>(CLOB)</column>
how do you get the api to write the actual CLOB data?That article is talking about choosing HOW to STORE an XML document.
I want to know how to write the contents of a CLOB column along with the other columns in a table in a single XML document.
I know how to store an XML doc as a clob I know how to store an XML doc object relationally.
I I have a table with 5 varchar2 columns 5 number columns and 1 clob column and I create an xml document as a clob from a select * on that table. I then write that clob to the file system. What is the clob columns data going to look like?
its gonna be <column>(CLOB)</column> THATS NOT WHAT I WANT. I want the actual data that was in that CLOB column.
Thank you for all responses. -
Blocking session in hot backup mode?
In 8.1.7.4 Some time While in hot backup mode, blocking session occuring by checkpoint session background process. Can we issue the alter system checkpoint command in this
Situation ? how to handle this?best way is to try and see but checkpointing frequently wont help in my opinion, a better workaround may be ensuring you only place one tablepspace at a time in backup mode and bring the tablespace out of backup mode as soon as you have backed it up.
Maybe you are looking for
-
Diferentes Fuso horários Brasil
Olá pessoal, boa tarde! Estou com um problema relacionado aos diferentes Fuso Horários do Brasil. O erro é o seguinte: O meu sistema tem horário padrão com timezone -3 e eu possuo alguns locais de negócios em Manaus, onde o timezone é -4. Seguindo to
-
Solve this Dynamic sql problem
hi i am sending the table and the contents in the table and what i want from the table. SQL> descr sswms_rule_components; Name Null? Type RULE_COMPONENT_ID NOT NULL NUMBER RULE_COMPONENT_CODE NOT NULL VARCHAR2(30) RULE_COMPONENT_NAME NOT NULL VARCHAR
-
How to Pass dashboard prompt value to RPD variable??
Hi Experts, I am creating RPD variable with below query in initialization block SELECT extract(month from Max(report_date)) from xyz_date_dim where report_id=14 and year=:YEAR I am having YEAR prompt in dashboard..from this RPD variable i want to ge
-
Scrollable Frame (Swing Newbie)
Hi, new to Swing programming and getting stuck with making a scrollable window. This was my original code which works (the base class extends Canvas so when I used panel.add(this) it is adding a Canvas: public Game() { // create a frame to
-
WDS does not seem to increase strength of my network
Hi all, I have an older flying saucer Airport Extreme a/b/g (think it is snow model it has two ethernet ports and usb but no phone connection about 6 years old) and also a new Airport express b/g/n about 1 year old. When I first bought the express I