ASD Export/Import and the Anti-Marshal (kind of like a supervillain)

Just tried to export a single resource action and import it back into the same environment with a new "prefix" and I get the following errors on validation.... same goes for importing it into another environment. (which we will call "new environment"... where the Resource Action doesn't exist) The workflow that the RA points to exists in the current environment because there is an RA that already points to that workflow. In the new environment, the workflow exists due to a successful vRO sync. (we can then build a successful form against the workflow in the new environment.)
It seems like it is complaining about the Resource Type, but none of those were selected for export.. so one would expect that they wouldn't be imported.
Anybody try out the export/import functionality in ASD and have it be successful?
When we build a form in our Lab environment, we have to completely rebuild it in two other environments. Though building forms in ASD is exceedingly fun and intuitive, we would really like to have a working export/import capability!

It throws same error for exporting/importing ASD blueprints( Nothing else was selected to export like actions etc). In this case ASD blueprint exists in the destination. Sean, did you make any progress?
Failed on Can not unmarshal entity:resource-mappings of type: com.vmware.vcac.designer.rest.stubs.CsResourceType
Warning
RHEL
Service Blueprint
blueprint.name.duplication
Info
RHEL
Service Blueprint
blueprint.validation.success
Error
Can not unmarshal entity:resource-operations
Resource Action
resourceoperation.unmarshal.exception
Error
Can not unmarshal entity:resource-types
Custom Resource/Mapping
resourcetype.unmarshal.exception
Error
Can not unmarshal entity:resource-mappings
Custom Resource/Mapping
resourcetype.unmarshal.exception

Similar Messages

Doubt in export, import and table para when creating Function Module

Dear fellow ABAPers,
I have a doubt in defining export, import and table parameter while creating a function module.
I am calling a function module inside a user exit. Now in the user exit the SAP fills an internal table called i_lfa1 with all the data user has eneterd.
Now I want to pass this whole internal table to function module and the perform some checks on the values of internal table.
After that function module fills an error structure with values depending on some check.
1)
How do I pass this internal table to function module ?
When I am creating function module in se37 where do I define this iternal table type ? Is it in Import or Table parameter during function module creation?
2)
Where do I define error structure type (which is returned by function module to main program)? Is it in Export or table parameter during function module creation?
Please clear my doubt..
Relevant points will be awarded.
Regards,
Tushar.

Hi Tushar,
1. How do I pass this internal table to function module ?
   I assume u are creating your own Y/Z FM.
   Pass it thru TABLES parameter.
2. When I am creating function module in se37 where do I define this iternal table type
   Define this in TABLES interface.
   What Type ?
   THE SAME TYPE WHICH HAS BEEN DEFINED
    WHILE PASSING IN THE USER-EXIT FUNCTION MODULE.
   IF U SEE THE FM OF THE USER-EXIT,
   U WILL COME TO KNOW.
3.
Where do I define error structure type (which is returned by function module to main program)? Is it in Export or table parameter during function module creation?
Define it in TABLES interace. (not in export, import)
(Since what u are going to return is an internal table)
U can take for eg. BDCMSGCOLL.
OR u can create your own Y/Z structure
for the same purpose.
(or u can use the structure type T100)
I hope it helps.
Regards,
Amit M.

Export/Import Error: The security token could not be authenticated

We currently are working in PLM 6.1.1 and users are experiencing Export/Import Issues, the error appears frequently with several users.
Steps:
1. A new token is generated from our QA environment
2. The user logs into Dev and transfers the token
3. In the export ADMIN area the user selects a section
4. In the QA environment the user schedules the import
5. The import is scheduled however the error is received after a few mins
Error Message:
The security token could not be authenticated or authorized ---> The directory service is unavailable.
at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall)
at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
at Xeno.Prodika.XenoDoc.Handlers.DRL.DrlService.GetAttachment(tIdentifier Identifier)
at Xeno.Prodika.XenoDoc.Handlers.DRL.DrlWebServiceLifecycleHandler.Load(IXDocument xdoc, String pkid)
at Xeno.Prodika.XenoDoc.BaseLibraryManager.LoadDocumentPhaseII(IXLibraryConfiguration libConfig, IXDocument xdoc, String pkid)
at Xeno.Prodika.XenoDoc.BaseLibraryManager.LoadDocument(String pkid)
at Xeno.Prodika.ExportImport.DataExchange.ImportRequestProcessor.ProcessRequest(IApplicationManager applicationManager, IImportRequestQueue request)
This error can be difficult to reproduce but occurs periodically.

This is likely a DRL issue. verify DRL is configured correctly and a valid PLM4P user is setup in the setup assistant. in addition, make sure you added the new app in IIS for DRLService (this is a doc bug we are correcting that we failed to include in the 611 guide). verify you can attach and then open an attachment on a material spec.

Difference between client Export/Import and a system refresh

Hi Experts,
I would like to know the diffrence between client Export/Import and System refresh.
Actually i have done client export from our production system and imported it into our quality system, I have asked our functional consultants whether the production data is now available in Quality. They replied me saying whole data of production system is available in Quality system as off date i have copied the export.
The size of the export was around 8GB, How can this have all the data of Production system which is around 600 GB.
In this way what is the use of System refresh which is done by database level ( changing the cntrl file etc... ), As i am getting all the data by doing Client Export/Import.
Thanks & Regards,
Injamuri

Hi,
What is system refresh when and why it is done?
The system refersh is nothing but the deletion of the client and replacing the data from other client. For example : you have clients 100, 200 and 300. Suppose when you want to refresh the client 100 you remove the client 100 and replace it with 200 0r 300 as per your reqiurement.
Mostly the refresh of clients will be happen at the time of development stage.
System Refresh is a simplified term to Client Copy. Client Copy means copying the production client on to the quality to test the real data. As recommend by SAP this need to carried out every 3 months.
The process to carry out the same is as follows:
1. Create a client on quality system using txn scc4
2. Create a RFC between Production system and Quality System (need to create on quality system)
3. Login to the newly created client using sap* and pass as a password
4. Txn sccl to start the client copy.
You can test the client copy by selecting the test run option. (test run will estimate the time taken for the activity).
Anil

I don't know how to use the canlendars function and the notes are kind of messy code,anyone help me

i don't know how to use the canlendars function and the notes are kind of messy code,anyone help me

Step by step:
1. On your main vi Front Panel, create your boolean indicator.
2. On the block diagram, right click the new boolean indicator and select Create - Reference.
3. On sub-vi front panel, create boolean indicator (or use one that is already created).
4. On sub-vi front panel, create a reference (Controls Palette - Refnum - Control Refnum).
5. Right click on the newly created Refnum and select Select Vi Server Class - Generic - GObject - Control - Boolean. The refnum label changes to BoolRefnum.
6. On sub-vi block diagram, create Property Node (Functions - Application Control - Property Node). Find the BoolRefnum and move it close to the new Property Node.
7. Wire the BoolRefnum to the reference input of the property node.
8.
Right click on the property node and select Change to All Write.
9. Move mouse to point to Visible inside property node box, left click and select Value.
10. Wire the boolean indicator from step 3 to the Value input of the property node.
11. On sub-vi front panel, right click on icon and select Show Connector.
12. Click on empty connector spot then click on the new BoolRefnum. Save your sub-vi.
13. On main vi block diagram, connect refernece created in step 2 to the new connector terminal of sub-vi.
14. Save and run.
Here are the modified vi's.
- tbob
Inventor of the WORM Global
Attachments:
Pass_a_Reference.vi ‏20 KB
GL_Flicker_mod.vi ‏83 KB

I would like to canceal an Update since I do not have an access to a wifi network and the up is kind of blocked

I would like to canceal an Update since I do not have an access to a wifi network and the up is kind of blocked

What is showing you have an update?
How do you know if you have an update if you do not have a wifi connection?
and the up is kind of blocked
What is the "up"?

My iTunes was working fine, all my CDs would import fully and quickly. Now they are importing slowly and when the CDs get to the last track they don't import and the CD drive just keeps spinning without doing anything! How can I fix this?

My iTunes was working fine, all my CDs would import fully and quickly. Now they are importing slowly and when the CDs get to the last track they don't import and the CD drive just keeps spinning without doing anything! How can I fix this?
I don't want to have to restart or reinstall my iTunes again as I'll have to redo all my playlists etc

Likely that CD then. Check visually for damage, blemishes, etc., not that there's anything you can really do about those other than return the CD.
The drive sits there and spins because it is trying to re-read the CD. iTunes has error correction which is contributing to all this re-reading, I believe, and you may be able to disable that in preferences if you aren't picky about the result.
You can also try other rippers such as Max or XLD. I know those have configurable error correction. I like XLD but it is slightly tricky to use until you find that for some reason the author has put all settings under preferences, not just the set once and forget ones.

My new iphone is running extremley slow, internet takes ages to load, apps take ages to install and has trouble connecting to app store. and the apps dont work properly like ebay wont open or refresh items, plz help

my new iphone is running extremley slow, internet takes ages to load, apps take ages to install and has trouble connecting to app store. and the apps dont work properly like ebay wont open or refresh items, plz help
my iphone4 is 10 times faster
i have backed up on itunes and restored but still no luck
even siri is lagging

my new iphone is running extremley slow, internet takes ages to load, apps take ages to install and has trouble connecting to app store. and the apps dont work properly like ebay wont open or refresh items, plz help
my iphone4 is 10 times faster
i have backed up on itunes and restored but still no luck
even siri is lagging

I purchased Fifa13 from the App Store, downloaded it in my pc..,but whrn i am trying to install it in my iad frpm the pc, i couldnt do it. The installation process stops after some time and the ipad shows some thing like "can sync..,failed to install fifa

I purchased Fifa13 from the App Store, downloaded it in my pc..,but when i am trying to install it in my ipad frpm the pc, i couldnt do it. The installation process stops after some time and the ipad shows some thing like "can sync..,failed to install fifa13"
What can i do?
btw....,its happeniing only wth the fifa13, installed other apps from pc previously.

anybody answer me fast

My new black iPhone 5 came scratched from the top and the sides!! Its like it has no color!! why? i just opened it from its box!!

my new black iPhone 5 came scratched from the top and the sides!! Its like it has no color!! why? i just opened it from its box!!

Return it immediatly.

So i dropped my iphone 4 in class and the screen is cracked. it wont turn on so i went home and connected it into my itunes and the phone just keeps beeping like every ten seconds and the phone lights up just a little. What does this all mean?

so i dropped my iphone 4 in class and the screen is cracked. it wont turn on so i went home and connected it into my itunes and the phone just keeps beeping like every ten seconds and the phone lights up just a little. What does this all mean?

It means you should take it to the Genius Bar. You will no doubt need to buy an out of warranty replacement.

Export/Import and Client Copy

Hi All,
Could you please help me with what are the major differences between Export/Import...client copy...and a System Refresh.How they differ from each other.
Regards
Rajesh

Hello Rajesh ,
I have capture some data from SAP Help :
Local Copy: Copying Clients Within a System:
You can improve the performance of the client copy by, for example, by excluding tables or packages, with Edit -> Expert Settings.
You can exclude tables from the client copy, for example if they are not relevant for the target client, in the Tables tab
Copying Clients Between Systems (Remote Copy):
The same product is installed, with the same release, in both systems
The client copier can copy a client into another system. The systems can be on different platforms. You can change the client number.
When you copy a client from one system to another, the data is transferred directly via the RFC interface - there is no intermediate storage on hard disk.
Transporting Clients Between Systems ;Client export (SCC8):
The client copier can copy a client into another system, which can be on a different platform. You can change the client number.
You are no longer required to transport clients before you can copy them between systems. You can make a remote copy instead.
Up to three transport requests are created, depending on the selected copy profile and the existing data.
The transport request for texts is e.g. only created if the source client contains customer texts.
<sid>KO<no> cross-client data
<sid>KT<no> client-specific data
<sid>KX<no> texts and forms
The data export is performed automatically asynchronously. The output of the export includes the names of the transport requests that are to be imported.
Import transport requests into the target client (STMS)
Choose one of the transport requests of the client transport in the Transport Management System (TMS). The other transport requests belonging to this client transport are then automatically added in the correct order.
Import these transport requests into the target client.
client import postprocessing (SCC7)
You need to perform postprocessing activities to adapt the runtime environment to the current state of the data.
Copy by Transport Request :
This function transports customizing changes that have been recorded in a transport request between two clients in a system.
You can choose whether you only copy the object list of the request or also the object lists of unreleased tasks in the request.
Entries in the target client are overwritten or deleted according to the key entries in the transport request.
Choose Administration -> System administration -> Administration -> Client admin. ->Special Functions -> Copy Transport Request.
<a href="http://help.sap.com/saphelp_nw70/helpdata/en/69/c24c0f4ba111d189750000e8322d00/frameset.htm">For more info Click here</a>
Regards ,
Santosh Karadkar

[EWS][FastTransfer][MS-OXCFXICS] Question about paging in the Fast Transfer Stream after exporting message and the meaning of the config in the previous section of the stream.

Hi, all.
First, I want to construct a fast transfer stream by programming not using the export item's stream and to import the stream to the folder by posting import request in EWS.
So, I export the item by EWS and investigate the exporting stream's struct by reading the [MS-OXCFXICS].pdf. And I can parse each MAPI property, marker, meta-property from the stream.
I find that the stream is made of many pages, most page's length is 0x7BC0, some are less then 0x7BC0. And in the previous section of the stream, there are some configurations. So the questions are:
1. What is the paging rule? or What is the principle of the paging? Whether a complete propvalue/marker(ref from [MS-OXCFXICS].pdf) must be contained in a page except some binary type?
2. Why the page's binary length is 0x7BC0? Or where is the configuation about paging length?
3. The stream is made of the FXOpcodes and the subbuffer about the FXOpcodes, and I find the mean of the FXOpcodes:
internal enum FxOpcodes
None = 0,
Config = 1,
TransferBuffer = 2,
IsInterfaceOk = 3,
TellPartnerVersion = 4,
StartMdbEventsImport = 11,
FinishMdbEventsImport = 12,
AddMdbEvents = 13,
SetWatermarks = 14,
SetReceiveFolder = 15,
SetPerUser = 0x10,
SetProps = 0x11
and in the stream there are 4 part(after I parse the stream):
A. OpCode:Config, value:0000000001000000
B. OpCode:IsInterfaceOk, value:010000000703020000000000C00000000000004600240080
C. OpCode:TellPartnerVersion, value:000F91838417
D and follows is: OpCode:TransferBuffer, Count:31680
So
a. What is the OpCode:Config value meaning?
b. Some parts of The OpCode:IsInterfaceOk' value is the IID_IMessage("00020307-0000-0000-C000-000000000046"), What is other parts meaning?
Thanks in advance for any ideas.

Hi Haiyang,
Your questions are not covered by the Open Specification documentation and this is documented in [MS-OXWSBTRF] — v20141018 section “1.3 Overview”.
The upload and export data stream is an opaque format that only needs to be understood by a server implementation. The client only serves as a repository for the opaque data stream so that it can be uploaded to the server at
a later time.
You made good progress in interpreting the buffer using other documents. Why do you need to be able to parse the data? Please describe your project in details and I might submit a suggestion to document the layout of the data stream,
if your project justifies it. You can send the description directly to me.
Thanks, Vilmos

[EWS][FastTransfer] Question about paging in the Fast Transfer Stream after exporting message and the meaning of the config in the previous section of the stream.

Hi, all.
First, I want to construct a fast transfer stream by programming not using the export item's stream and to import the stream to the folder by posting import request in EWS.
So, I export the item by EWS and investigate the exporting stream's struct by reading the [MS-OXCFXICS].pdf. And I can parse each MAPI property, marker, meta-property from the stream.
I find that the stream is made of many pages, most page's length is 0x7BC0, some are less then 0x7BC0. And in the previous section of the stream, there are some configurations. So the questions are:
1. What is the paging rule? or What is the principle of the paging? Whether a complete propvalue/marker(ref from [MS-OXCFXICS].pdf) must be contained in a page except some binary type?
2. Why the page's binary length is 0x7BC0? Or where is the configuation about paging length?
3. The stream is made of the FXOpcodes and the subbuffer about the FXOpcodes, and I find the mean of the FXOpcodes:
internal enum FxOpcodes
None = 0,
Config = 1,
TransferBuffer = 2,
IsInterfaceOk = 3,
TellPartnerVersion = 4,
StartMdbEventsImport = 11,
FinishMdbEventsImport = 12,
AddMdbEvents = 13,
SetWatermarks = 14,
SetReceiveFolder = 15,
SetPerUser = 0x10,
SetProps = 0x11
and in the stream there are 4 part(after I parse the stream):
A. OpCode:Config, value:0000000001000000
B. OpCode:IsInterfaceOk, value:010000000703020000000000C00000000000004600240080
C. OpCode:TellPartnerVersion, value:000F91838417
D and follows is: OpCode:TransferBuffer, Count:31680
So
a. What is the OpCode:Config value meaning?
b. Some parts of The OpCode:IsInterfaceOk' value is the IID_IMessage("00020307-0000-0000-C000-000000000046"), What is other parts meaning?
Thanks in advance for any ideas.

OK. Thank you.
Today I build a stream with a paging rule as below:
1. Keep each page's byte length is 31680.
2. Make sure a complete property value in a page except binary type property whose value length is larger
than 31680.
And it can work very well when import the stream to the folder by EWS.

Export & Import in the same DataBase

Hi,
I'm trying to export and import in the same DataBase but in different User/Tablespace, the imp procces create the objects in the same Tablespace of the export. What can I do to create a copy of a schema in the same database?
Thanks. JEA

I am not sure if I am reading your question correctly, Create a new user in your database.
Use the command line (DOS) command 'exp80 username/password@hoststring'
there are a number of parameters here, you can find their meanings online if you search for 'export ORACLE command line parameters', I don't know what your requirements are but you have to set the FILE parameter with the name of the file you wish to store your output in(ext should be .dmp).
To import, use imp80 and log on as the new user you created then the following parameters need to be set:
File= your file name
SHOW = n
IGNORE = n
GRANTS = y
ROWS = y
FROMUSER = old user name
TOUSER = new user name
TABLES = *
I hope this helps.
SE

ASD Export/Import and the Anti-Marshal (kind of like a supervillain)

Similar Messages

Maybe you are looking for