Asignment of  New  Characteristics via Categories in CCM 2.0

Hi guys,
Im using 5 new characterisitics in a Vendor catalog.
Z_COMPANY       /CCM/ID
Z_DOC_TYPE      /CCM/ID
Z_DATE               DATE
Z_SUPPLIER_ID   /CCM/ID
Z_MARCA            /CCM/DESCRIPTION
I managed to upload these new characteristicas in the Scheme we use with correct values.
The problem Im facing is that upon asignment of the category to a category in the Master Catalog, CCM2 does not transfer the values of the new characteristics! (It transfers only the standard ones!)
The same should apply when I asign a Category of a Procurement catalog to the master catalog.
Anyone had this problem befor and what do I need to do  to solve it (implement a Badi?)
Thanks,
Aart

Thank you Renga,
I looked into the Badi BBP_CATALOG_TRANSFER and it apears to me it is related to the transfer of Catalog Items towards the Shopping cart in SRM.
Can I use this same Badi to transfer the values of my Z-characteristics in my Vendor Catalog to the Master Catalog and to my procurement catalogs upon asigning the categories of these catalogs? Or are there other Badi´s available to do this?
Example of the problem:
the characteristic Z_COMPANY has the value ENT in my vendor catalog.
Upon asigning the category of the vendor catalog to the master catalog - with asignment of characteristics automatically and with asignment of positions! - the value of characteristic Z_COMPANY stays empty in the item of the master catalog. The value is not copied into the master catalog as it should be.
Thanks,
Aart

Similar Messages

  • Adding new characteristics to cube with data

    Hi Gurus,
    i need to add some characteristics to a cube already in production, this cube is customized version of material stocks/movements cube (0ic_c03).
    i am looking for a way to add the new characteristics without having to do reinitialisation (opening stock,...), i am thinking about a loopback process but how do i manage to get the new characteristics populated for the historical data?
    Thank you.

    Hi,
    If you want to load historial data, you must take ECC down time and re-intialization is required.Becasue you are adding new object in Cube and for that you need to change the Update rules, then need to load historical data, so without down time and reinitialization it is not possible.
    Check like below.
    You have data in PSA, so try to delete data from Cube and then load from PSA. Because you may write code in Update rules on;y I think. So in that case, it may work.
    Thanks
    Reddy

  • I am migrating to a new iMac via TimeMachine back up.  My iPhoto libraries are on external drive.  I'd like to migrate only the internal hard drive data to the new internal Drive then just plug in iPhoto library drive.  Is this going be a problem?

    I am migrating to a new iMac via TimeMachine back up.  My iPhoto libraries are on an external drive.  Both drives are backed up on Time Machine.  I'd like to migrate only the old internal hard drive data to the new internal Drive and then just plug in iPhoto library drive to the new iMac.  This would save having to transfer several hundred GBs of data.  Will this work using Set Up Assistant?

    Your user account on the new Mac must have a different UID than on the old one.  See the pink box in Problems after using Migration Assistant for an explanation.
    You'll need to change the permissions on the iPhoto library on the external HD.  Do a Get Info on it, click the padlock at the bottom of the Sharing & Permissions section of the Info window and enter your Admin password. 
    Then click the plus sign, select the user account you want on the next screen, and click Select.   Then change Read only to Read & Write for that user via the little arrows.  Finally, click the "gear" icon and select Apply to enclosed items.  That may take a few mintutes on a large library.

  • I have recently updated the new apps via creative cloud now photoshop and bridge no longer work, they open then say they have encountered a problem and close, I also tried opening the old version of photo shop but getting the same result

    I have recently updated the new apps via creative cloud now photoshop and bridge no longer work, they open then say they have encountered a problem and close, I also tried opening the old version of photo shop but getting the same result

    What OS version? What's the exact error? Exactly when does the error occur? What previous versions? What is on the screen when the error displays? Does Photoshop get fully open?
    Try opening Photoshop holding down Shift key immediately to turn off plug-ins. Lots of good suggestions here: Photoshop: Basic Troubleshooting steps to fix most issues

  • How can I access files that I moved from an older MacBook Pro to a newer one via Firewire and Migration assistant.  The files show up on the new MacBook but cannot be opened.  Thanks!

    How can I access files that I moved from an older MacBook Pro to a newer one via Firewire and Migration assistant?  The files show up on the new MacBook but cannot be opened.  Thanks!

    Get info then check permissions then add your curent user name (it was probably different on old Mac) and give your username full read/write permissions.

  • HT4527 I'm transferring my iTunes library from a PC to my new iMac via home sharing.  I've followed all of the steps to "import" my library but the "import" button is greyed out.  Any suggestions?

    I'm transferring my iTunes library from a PC to my new iMac via home sharing.  I've followed all of the steps to "import" my library but the "import" button is greyed out.  Any suggestions?

    There is no need to import anything or use Home Sharing.
    Copy the ENTIRE iTunes folder from the old computer to the new computer, everything will be exactly as it was.

  • Cannot add a new characteristics from the system catalog

    Hi,
    I am trying to pull and add a new characteristics from the existing characteristics catalog. However when i save and activate the new char, the system throwing a yellow warning message as "Field KMKDGR has the same name as field KDGRP". When i proceed to save it since its just a warning message the system says all fields are saved. However when i quit and come to the characteristics list of the op concern, i notice the new characteristic is not added into the list of characteristics. Why is it so?
    Is it because of the warning message?

    Hi
    The warning message can be ignored...
    Once you save the char, you need to reactivate your data structure in KEA0... Ideally, when you save and press the back button, system itself gives a pop up message to reactivate the data structure...
    1. Push the char from right to left
    2. There will be a "match-stick" icon at the top left of the screen.. Click it
    3. Then press back button
    4. Whether with our without pop up message, activate your data structure in KEA0
    Regards
    Ajay M

  • Adding new characteristics and value fields in COPA

    I have recently added several new characteristics and one new value field to the operating concern in the development system.
    I am not exactly sure how to create the transport.  This is the first time I have done a transport in COPA so I was hoping someone out there would have some tips on how this is done.
    Also any helpful tips with transporting this type of change is much appreciated.
    Thanks,
    Laurie Hensiek

    Refer to the documentation at http://help.sap.com/saphelp_46c/helpdata/en/c6/f22c7dd435d1118b3f0060b03ca329/frameset.htm
    This is under the node Tools>production startup>transport.

  • The main part of the safari page is grey and won't respond/can't type in any commands.  I can move back through the previous pages, and even open new ones via the URL, but can't get onto the main part of the page and I can't get onto the 9 page option. !?

    The main part of the safari page is grey and won't respond/can't type in any commands.  I can move back through the previous pages, and even open new ones via the URL, but can't get onto the main part of the page and I can't get onto the 9 page option. !?
    Help, please.

    Try clearing Safari's cache : Settings > Safari > Clear Cache (and Clear History)
    If that doesn't work then try closing Safari completely and then re-open it : from the home screen (i.e. not with Safari 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Safari app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
    A third option is a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • I have a new iPhone as my old one was stolen. How can I put my old contacts on to my new phone via iCloud???

    I have a new iPhone as my old one was stolen. How can I put my old contacts onto my new phone via iCloud? Thanks.

    http://support.apple.com/kb/HT4859

  • How to asign a new report categery to report in hr abap

    hi experts,
      could u please send me step by step procedure for asigning a how to asign a new report categery to report in hr abap.
    Thanks in advance
    jaganmohan reddy

    HI
    PLEASE CHECK <u>Defining a new report category</u> UNDER THE LINK
    <a href="http://www.atomhr.com/know_preview/hr580_cust_sel_sceen_chp1_46.htm">http://www.atomhr.com/know_preview/hr580_cust_sel_sceen_chp1_46.htm</a>
    IF IT FINDS USEFUL PLEASE REWARD POINTS
    REGARDS
    ANOOP

  • Add new characteristics in the ReleaseStrategies to PO in the PRD system

    Dear all ,
    We need to create 2 new characteristics and add it to our Release strategies in production systems.
    we have more or less 2500 opened POs.
    Can I add directly in the Production system ?
    Does anyone knows the impacts on the system if we do that directly in the PRD ?
    Someone have a list of things to do prior this change and a list to do after this change ?
    Impacts ?
    best regards,
    Ale

    Hi,
    Try the same in Quality server and check for few POs.
    If a new characteristic is added to a CLASS eg. in ur case Pur group is added as a new characteristic to CLASS then Release strategy tab gets triggered only to those POs for which all conditions are met.
    In ur case if olds POs purchasing group is different from the one mentioned in the values of Pur Group characteristic then  u will not be able to release POs once u go to change mode to old POs since  release strategy tab itself disappears.
    Hope its clear
    Regards,
    Uzair

  • I was transferring data from my old iMac to my new iMac via Time Machine. After about 4 hours, the electrical power fluctuated and turned off my wi-fi. Now most of my necessary programs are useless. How do I erase and start over?

    I was transferring data from my old iMac to my new iMac via Time Machine. After about 4 hours, the electrical power fluctuated and turned off my wi-fi. Now most of my necessary programs are useless. How do I erase that mess and start over?

    Hello there, LynnS.
    The following Knowledge Base article and it's referenced link should get you started with the Erase and Install of Mavericks:
    OS X Mavericks: Erase and reinstall OS X
    http://support.apple.com/kb/PH14243
    Once you've gone through those 2 articles, this article should help you with restoring from your Time Machine Backup:
    OS X Mavericks: Recover your entire system
    http://support.apple.com/kb/PH14185
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • Moving ALL files from an old iMac to a new iMac, via Firewire...

    After hooking up my old iMac (2 years old) to a brand new one, via firewire, and checking every box to copy, it didn't copy my iTunes or iPhoto libraries to the new computer. Does this have to be done with DVDs, or through an iPod?
    Only applications, Logic, photoshop etc. copied onto the new iMac.

    Moving iTunes folder
    http://support.apple.com/kb/HT1449
    Moving iPhoto
    http://support.apple.com/kb/HT1229

  • HT5219 can i connect my dv camera to my new imac via thunderbolt firewire adaptor

    can i connect my dv camera to my new imac via thunderbolt firewire adaptor

    If FW is the only connection the camera has then yes Thunderbolt Firewire adapter is correct. It's available from a number of sources including Apples own online store, in the USA the link would be:
    http://store.apple.com/us/product/MD464ZM/A/apple-thunderbolt-to-firewire-adapte r

Maybe you are looking for