Ask for detail explaination on "subtotal" in pricing procedure

hi, everyone!
  I want to make clear about detail items under "subtotal" field in SD pricing procedure configuration.
  For example, A--carry over price to KOMP-CMPRE, is a must for credit control on open sales order value.
  But for other options, such as B, D, E and so on items, in which business suitation we need to use it? And where the "xworkd, xworke,..." are stored? What's the basic mechanism between condition results and communication structure, i.g., KOMP?
  Would anyone do me a favor to give an answer or send some documents to my e-mail box: [email protected]
  Tks!
Justin

dear justin
Sub-total:     
The value of this field determines where the value of the sub-total is gong to be stored in data base
Sub-total – 1     : KOMP – KZWI-1
Sub-total - 2     : KOMP – KZWI-2
rewards if it helps
siva

Similar Messages

  • ITunes gives me an error and asks for re-installation, the error is "The procedure entry point CMBlockBufferCopyDataBytes could not be located in the dynamic link library coreMedia.dll", and the iTunes can not be lunched any more

    iTunes gives me an error and asks for re-installation, the error is "The procedure entry point CMBlockBufferCopyDataBytes could not be located in the dynamic link library coreMedia.dll", and the iTunes can not be lunched any more.
    can you please help, as I also tried to re-install it but pr

    Entry point errors can often be fixed by deleting the offending dll, then repairing the component it is part of. CoreMedia.dll is part of Apple Application Support.
    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    If the advice above doesn't resolve things you could try this alternate version:
    iTunes 12.1.0.71 for Windows (64-bit - for older video cards) - itunes64setup.exe (2015-01-28)
    which is a 64-bit installer for the 32-bit version of the core application, similar to previous 64-bit releases.
    Or roll back to the previous build:
    iTunes 12.0.1.26 for Windows (32-bit) - iTunesSetup.exe (2014-10-16)
    iTunes 12.0.1.26 for Windows (64-bit) - iTunes64Setup.exe (2014-10-16)
    tt2

  • Ask help about detail explaination on "subtotal" field in pricing procedure

    Hi, everybody:
       I wanna get detail explanation about "subtotal" field in pricing procedure configuration. I have caught basic thoery on this field usage. However, I'm unclear on its option items, for exapmle, Dcopy value to XWORKD, Ecopy value to XWORKF and so on. I can't find where these kinds of objects are stored and in which suituation we have to select one of them in configuration.
      Another question is how the standard programe uses KOMP to store condition results and transfer them to relative modules, for example, A--carry over price to KOMP-CMPRE.
       Hoping get answer or some documents from you on this issue. If you have reference documents sent to me, please send to my e-mail box: [email protected]
      Tks!
    Justin

    dear justin
    Sub-total:     
    The value of this field determines where the value of the sub-total is gong to be stored in data base
    Sub-total – 1     : KOMP – KZWI-1
    Sub-total - 2     : KOMP – KZWI-2
    rewards if it helps
    siva

  • Query on Subtotal in Pricing procedure

    Hi All,
    In my Pricing procedure, i have customized net value to Sub Total field '7'.
    Now my requirement is to fetch this subtotal value in my custom program for further calculation.
    Can someone please help me on this.
    Let me know if i am not clear.
    Thanks and Regards,
    Sachin M M

    I'm not sure why you need to do that for net value which has it's own field in VBAP, unless your definition of net value is different.  If your 1-6 subtotal fields are used (KZWI1-6 in VBAP and VBRP), then it's easier to use one of the other subtotal markers.  You can put as many KZWI-like fields in the append structures to KOMP, VBAP and VBRP as you like, such as ZZWIF.  You then need to clear the extra fields in USEREXIT_XKOMV_BEWERTEN_INIT in RV61AFZB and tag your condition with one of the subtotal markers, such as 'F'.  Add a statistical subtotal line right below it with a formula as follows:
    komp-zzwif = xworkf.
    xkwert = komp-zzwif.
    Then, the value is always stored in VBAP and VBRP.

  • What is subtotal in pricing procedure

    hi
    how should we tell about subtotal in pricing prcedure.  what is the subtotal 1 will tell about us.
    thanks in advance

    Hi Nagesh,
    Subtotal Controls wheather and in which fields conditions amounts or subtotals ( for Example a customer discount or the cost of a material are stored).
    in the same fields are used to store different conditon amounts, the system totals the individula amounts.
    These Conditons amounts or subtotals are used as a starting point for further calculations. if you want a subtotal or all the discounts inculded in the pricing of a sales Order.
    Hope this clarifies your doubt and Please Reward If Really Helpful,
    Thanks and Regards,
    Sateesh.Kandula

  • Subtotal in Pricing Procedure

    Hi,
    How the sub total in a pricing procedure is caluclated if the FROM column = 0 and TO column = 0.
    Regards,
    Ram
    Edited by: Ram  on Aug 11, 2011 6:06 PM

    Hai Ram,
    In pricing procedure subtotal will be calculated like
    10     0     PR00     Price                      0       0
    11     0     ZPR0     Manual Pricing             10     11
    12     0     ZDIS            Customer Discount     10     12
    13     0     ___            Material Selling Price*     10     12*
    Now line 13 will subtotal Values from lines 10 to 12 , means add Price +Manual pricing ( incase user wants to increase price only) +  discount (- negative).
    If ED needs to be caculated the use From as 13.
    Regards,
    Mani

  • BT Wifi App keeps asking for details

    Hi all,
    I've been having trouble with the BT Wifi app for the last couple of days.  I keep getting the screen shown below.  I keep re-entering my details and getting stuck in a loop of seeing this screen.  I am able to sign into a hotspot via the web and then the app works OK but, of course, the app is supposed to do the signing in for me.  I've moved to app to phone storage to try and eliminate any permissions problem but it still doesn't work.  Has anyone else had this problem and how can I resolve it?  I have also tweeted @BT Care for help.
    ---Remember to mark as 'solved' and give stars when you like a post---

    For some reason this seems to have fixed itself all of a sudden.  Thanks all those who tried to help 
    ---Remember to mark as 'solved' and give stars when you like a post---

  • I have lost my debit card and app store asks for details

    Recently i bought whatsapp from my debit card and now when i am trying to get any free app from strore it asks my debit card details again and the thing is i have lost my debit card..........please help....!!!!

    You will need to log into your account through iTunes and select your payment method as "None"
    Steps on how to do so can be found here
    Hope this helps

  • Config required for EK02 condition type in Sales Pricing procedure

    Dear friends,
    I am trying to derive a costing run for sales order. I would like to know what are the config steps required to arrive a percentage factor for GP.
    Kindly guide me in this regard,
    Thanks in advance,
    Vinayak

    Hi,
    If you are doing sales order costing then you will have to define the condition type EK02. Go to V/08. Select the Procedure used in SD. Click on Control. Enter the condition EK02 - Calculated Cost and mark it as statistics.
    You sales order cost will be stored in such condition type.
    Regards,
    Jigar

  • Excise duty in the Pricing Procedure for Local Purchase / Importation

    Hi,
    I'd like to know how to set up the pricing procedure for the purchase of an IS Oil Material; for local purchase and importation, especially with regards to the excise duty posting.
    Local purchase:  the vendor will bill us inclusive of the ED tax he previously paid, so the tax is just passed on to us..  My receiving location has ED paid status. In the PO item, we need to see this price (inclusive of tax) in the net price field.
    Importation:  the vendor only bills us the cost of the material.  When we received the fuel, we paid ED tax to local tax authorities.
    I know that both in these scenarios, the system has to determine the excise duty.
    My questions are (1) how do you set up the excise duty condition type  in the pricing procedure(or do they have to be maintained in the pricing procedure?) ?   and (2)  how do you set up this condition type in the config?
    Thank you and hoping for your immediate feedback.
    zccr

    Hi,
    You can use same pricing procedure
    put 4 in subtotal in pricing procedure against the Discounr or freight cond
    and in taxinn
    BASb ALTCBV 362 and for jmop 363
    But this will work only if same  discount or freight value is in IV as that given in PO
    if freing value changes in IV then its a problem
    This is SAP bug, and SAP workes in that way only, freight value should be same in PO and IV
    other solution
    in taxinn create tax code like v8 vat 4% for 003 tax clasification
    in ftxp create tax code V8 desc vat 4%
    in fv11 for jvrd put 4
    and at the time of IV put this tax code for freight amount
    and for regular material value V1 tax code
    this will work only if u have used acess seq MWST instead of JTAX pr JST1
    hope this helps
    Vipin

  • Apple mail asking for "update" of my credit card information. Could this be a fraud?

    I received a mail from Apple, asking me to follow a link in order to update my information with Apple iTunes.
    The mail looks very original and trustworthy, however, I don't understand what "account" I'm supposed to give my information to, nor do I recognise the email address being an apple customer service address, as it said: [email protected]
    The link in this mail had the following address: apple.itunnes.tfain.com
    In the left side of the form that also asked for details of name, address and credit card number, expery date, and security code, the following was stated below a red sign:
    Attention Needed
    Due to recent updates we are asking many of our customers to confirm their information this is nothing to worry about.
    .... and it ends:
    Failure to comply with this may result in your account being suspended
    Is this really coming from apple?

    It's a hoax. Forward the email to:   [email protected]
    Then delete the email.
    Apple will never send you email asking you to update your credit card information.
    Failure to comply with this may result in your account being suspended
    That's just a scare tactic.

  • Application Catalog asks for credentials and refuses. Something wrong with IIS?

    I have Win2012/SQL2012/CM2012 R2 CU1 enviroment which was working fine before I started integrating MBAM 2.5. I first made a misstake By accepting port 80 for MBAM web sites, which crushed my MP. I then uninstalled MBAM so that only Default IIS site was
    available for port 80.
    But after this, application catalog components still did not recover from this, and also I see some errors in reporting service.
    I compared IIS site settings of authorization to another functional CM site system. Then I desided to wipe IIS and rebuild entirely some of CM roles. I uninstalled, MP, SUP and App Catalog roles. I unstalled IIS and deleted its config folders.
    Now I have new IIS and all roles installed, but App Catalog still not letting me it.
    I´ve being trouble shoting this for 3 days. Please help, ask for details.

    Hi,
    Glad to hear that and thank you for your sharing.
    Best Regards,
    Joyce
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Pricing Procedure for Quotation

    I have a requirement that my customized pricing procedure for PO should also be the same for Quotation. How can I assign my customized pricing procedure for Quotations.
    Please suggest if there is any solution for this?

    hi,
    At first go to M/06,
    Select the condition type which you want in your document...
    go into details..
    Here under pricing procedure enter RM0002 for the condition type which you wanna add...
    Also you have to maintained all other settings well which are general settings req. for Pricing Procedure..check those as well...ie. for access seq., cal. schema, sch. group etc...
    Regards
    Priyanka.P

  • Define Pricing Procedure for a Customized PO

    Hi
    I want to have a customized pricing procedure with PB00 is manually changeable even though it takes the price from info record
    and assign this Pricing procedure to a customized PO type.
    What are the steps involved, appreciated if in detailed manner.
    Rgds
    MM

    hi..
    u cant define pricing procedure specially for PO type...
    Pricing procedure is maintained for the combination for vendor schema group and PO schema..
    what u can do...u can create some cond type specifically for customized PO type...then..while using that PO type..use only those condition type..
    Try this out..
    Thanks

  • Pricing procedure for order with reference from order

    Dear Friends,
    If I create a sales order with reference to another sales order of different type, the pricing procedure is copied too.
    But I would to use another pricing procedure for second document
    I found the oss note 14136 but this is for reference from invoce
    I tried to create new data transfer routine for orders in copy from 51, but does not work
    Can you help me??
    thanks
    best regards
    GdA

    > If I create a sales order with reference to another sales order of different type, the pricing procedure is copied too. But I would to use another pricing procedure for second document,
    Based on my understanding of query.
    You are looking for a different pricing procedure in second doc.
    For instance, the PricProc for SalesDoc1 is ZPR001 and  the PricProc for SalesDoc2 is ZPR002, in addition to that, you want SalesDoc1 to become reference doc for SalesDoc2.
    For this, ZPR002 & ZPR001 should have common base price condition type and rest pricing can change.
    And for maintaining different Pricing Procedure with similar combination of sales area for SalesDoc1 & SalesDoc2, maintain different document pricing procedure for both docs and maintain Pricing procedure accordingly..
    Thanks & Regards
    J Prakash

Maybe you are looking for