Ask the Expert : Initial Set Up and LAN Connectivity for Cisco UCS Servers

Welcome to the Cisco Support Community Ask the Expert conversation. This is an opportunity to learn and ask questions about related to the initial setup of UCS C & B Series which include LAN connectivity from the UCS perspective with Cisco subject matter expert Kenny Perez.
In particularly, Kenny will cover topics such as: ESXi/Windows installations, RAID configurations (best practices for good performance and configuration), VLAN/Jumbo Frames configuration for B series and C series servers, Pools/Policies/Upgrades/Templates/Troubleshooting Tips for blade and rack servers, Fabric Interconnects configuration, general compatibility of Hardware/Software/drivers amongst other topics
Kenny Perez is a technical leader in Cisco Technical Assistance Center, where he works in Server Virtualization support team. His main job consists of supporting customers to implement and manage Cisco UCS B series and C series. He has background in computing, networking, and Vmware ESXi and has 3+ years of experience support UCS servers and is VCP certified.
Remember to use the rating system to let Kenny know if he has given you an adequate response.
This event lasts through October 10th, 2014. Visit this forum often to view responses to your questions and the questions of other Cisco Support Community members.

Hi,
Actually we have UCS 6248 fabric interconnect - first twelve ports are enabled and same in Cisco UCS Manager.
But when more port will be active by expansion module then UCSM can manage that too or need any other licence for UCSM too?

Similar Messages

Ask the Experts: IOS-XR Fundamentals and Architecture

Welcome to the Cisco Support Community Ask the Expert conversation.
Learn and ask questions about IOS-XR Fundamentals and Architecture.
November 18, 2014 through November 28, 2014.
Cisco IOS XR Software is a modular and fully distributed network operating system for service provider networks. Cisco IOS XR creates a highly available, highly secure routing platform.
It distributes processes across the control, data, and management planes with their own access controls and delivers routing-system scalability, service isolation, and manageability.
This is a Q&A extension of the Live expert Webcast.
Cisco subject matter experts Sudeep, Raj, and Sudhir, will focus on IOS-XR fundamentals.
Including:-
High-Level Overview of Cisco IOS XR
Cisco IOS XR Infrastructure
Configuration Management
Cisco IOS XR Monitoring and Operations
Cisco IOS XR Security
Introduction to different IOS-XR platforms
Sudeep Valengattil is a customer support engineer in High-Touch Technical Services at Cisco specializing in service provider technologies and platforms. Sudeep has got experience on XR platform like ASR9000, CRS, NCS and GSR. Sudeep has more than 9 years of experience in the IT industry and holds CCIE certification (36098) in Service provider.
Sudhir Kumar is a customer support engineer in High-Touch Technical Services at Cisco specializing in service provider technologies and platforms. His areas of expertise include Cisco CRS, ASR 9K and Cisco XR 12000 Series Routers. Sudhir has more than 10 years of experience in the IT industry and holds CCIE certification (35219) in Service provider and Routing and switching.
Raj Pathak is a customer support engineer in High-Touch Technical Services at Cisco specializing in service provider technologies and platforms. He serves as a support engineer for technical issues supporting Cisco IOS XR Software customers on Cisco CRS and Cisco XR 12000 Series Routers. Raj has more than 8 years of experience in the IT industry and holds CCIE certification (38760) in routing and switching.
For more information about this topic, visit the Expert Corner > Knowledge Sharing
Remember to use the rating system to let the experts know if you have received an adequate response.

Hi Charles,
To answer your question,
LPTS would be acting only on packet/traffic which is ingressing the router and destined for the router itself (for-us packets). It provides an internal forwarding table to route control/management protocol packets destined to local router to the right application for further processing. Once we have a packet entering the interface, the network processor would be performing a lookup to determine, if this packet is destined for us. Based on which, it will forward to LPTS. For eg, the ICMP packets coming in on an interface with destination IP of router itself, would be processed by LPTS. It also provides policing function for this traffic transparently.
Key facts about LPTS
1. LPTS is an always on feature. No user configuration needed to enable it.
2. LPTS is only applicable for traffic entring to the router and destined to the local router. Applies for control-plane and management plane traffic.
3. Packets originated by router and transit traffic is not processed by LPTS
4. LPTS polices the incoming traffic based on the pre-defined policer rates.
Here is an o/p snip to view the LPTS entries.
RP/0/RP0/CPU0:CRS-C#sh lpts pifib hard police loc 0/0/cpu0
Tue Nov 25 23:32:10.666 EDT
Node 0/0/CPU0:
Burst = 100ms for all flow types
FlowType Policer Type Cur. Rate Def. Rate Accepted Dropped
unconfigured-default 100 Static 500 500 0 0
L2TPv2-fragment 185 Static 700 700 0 0
Fragment 106 Static 1000 1000 0 0
OSPF-mc-known 107 Static 20000 20000 44818 0
OSPF-mc-default 111 Static 5000 5000 11366 0
Do let us know if you have any further queries.
Regards,
Sudeep Valengattil

Reminder: Ask the Experts Session on WSIT and Project Tango, April 30-May 4

This is a reminder about the Ask the Experts session on Web Services Interoperability Technology, WSIT (http://java.sun.com/webservices/interop/) and Project Tango (https://wsit.dev.java.net/).
If you've got a question about about these initiatives for interoperability between Java EE and .NET, post it on the Ask the Experts page (http://java.sun.com/developer/community/askxprt/) from April 30 to May 4 and get answers from Sun experts, Arun Gupta, Harold Carr, and Marek Potociar.

Thanks for the info!

Ask the Experts Session on WSIT and Project Tango: April 30-May 4

Web Services Interoperability Technology, WSIT, (http://java.sun.com/webservices/interop/) is an open-source implementation of next-generation web services technologies that deliver interoperability between Java EE and .Net. Project Tango (https://wsit.dev.java.net/) is a Sun initiative that develops and evolves the codebase for WSIT.
Got a question about WSIT or Project Tango? Post it on the Ask the Experts page (http://java.sun.com/developer/community/askxprt/) from April 30 to May 4 and get answers from Sun experts, Arun Gupta, Harold Carr, and Marek Potociar.

!

How to manage the ATE_SEARCH_IDX-index in Ask the expert-application?

I'm currently looking at the Ask the expert(=Tom Kyte) application and I cannot figure out how to manage the Oracle Text-index "ATE_SEARCH_IDX" ON "ATE_SUBMITTED_QUESTIONS" ("ANSWER")
INDEXTYPE IS "CTXSYS"."CONTEXT".
In the Readme-file can be read:
"To customize search functionality, view the Oracle Text Index installation
script. You can change the interval that the index is synched and change
the fields that are used in the search."
I don't see the Oracle Text Index installation-script.
Can anyone give me the contents of the script or come up with an alternative?
Thanks,
Jan Willem

Thank you, Marco. I found it.
Still, the reason why I was looking for it was the fact that I asked myself a question, answered it and then tried to Search for it. I couldn't find my own question (and answer).
The only way I found to make it work was to manually rebuild the index on the answer-column in ATE_SUBMITTED_QUESTIONS. But I'm sure there's another way, because these are not the kind of things you'd like a customer (or myself) to do on a regular basis.
Can you give me another way to synchronize this index preferably managed from inside the database?

Ask the Expert: Plan, Design, and Implement Mobile Remote Access, the Cisco Collaboration Edge Architecture

Welcome to the Cisco® Support Community Ask the Expert conversation. This is an opportunity to learn and ask questions about planning, designing, and implementing mobile remote access (Cisco Collaboration Edge Architecture) with Cisco subject matter experts Aashish Jolly and Abhijit Anand.
Cisco Collaboration Edge Architecture is an architecture that provides VPN-less access of Cisco Unified Communications resources to Cisco Jabber® users. This discussion is dedicated to addressing questions about design best practices while implementing mobile remote access.
For more information, refer to the Unified Communications Mobile and Remote Access via Cisco VCS deployment guide.
Aashish Jolly is a network consulting engineer who is currently serving as the Cisco Unified Communications consultant for the ExxonMobil Global account. Earlier at Cisco, he was part of the Cisco Technical Assistance Center (TAC), where he helped Cisco partners with installation, configuring, and troubleshooting Cisco Unified Communications products such as Cisco Unified Communications Manager and Manager Express, Cisco Unity® solutions, Cisco Unified Border Element, voice gateways and gatekeepers, and more. He has been associated with Cisco Unified Communications for more than seven years. He holds a bachelor of technology degree as well as Cisco CCIE® Voice (#18500), CCNP® Voice, and CCNA® certifications and VMware VCP5 and Red Hat RHCE certifications.
Abhijit Singh Anand is a network consulting engineer with the Cisco Advanced Services field delivery team in New Delhi. His current role involves designing, implementing, and optimizing large-scale collaboration solutions for enterprise and defense customers. He has also been an engineer at the Cisco TAC. Having worked on multiple technologies including wireless and LAN switching, he has been associated with Cisco Unified Communications technologies since 2006. He holds a master’s degree in computer applications and multiple certifications, including CCIE Voice (#19590), RHCE, and CWSP and CWNP.
Remember to use the rating system to let Aashish and Abhijit know if you have received an adequate response.
Because of the volume expected during this event, our experts might not be able to answer every question. Remember that you can continue the conversation on the Cisco Support Community Collaboration, Voice and Video page, in the Jabber Clients subcommunity, shortly after the event. This event lasts through June 20, 2014. Visit this forum often to view responses to your questions and the questions of other Cisco Support Community members.

Hi Marcelo,
Yes, there are some requirements for certificates in Expressway.
Expressway Core (Exp-C)
- Can be signed by either External or Internal CA
- Better to use a cluster name even if you start with 1 peer in Exp-C cluster. In the future, if more peers are added, changes would be minimal.
- Better to use FQDN of cluster as CN of certificate, this way the traversal zone configuration on Expressway-E won't require any change even if new peers are added to Exp-C cluster.
- If CUCM is mixed mode, include security profile names (in FQDN format) as Subject Alternate Names
- The Chat Node Aliases that are configured on the IM and Presence servers. They will be required only for Unified Communications XMPP federation deployments that intend to use both TLS and group chat. (Note that Unified Communications XMPP federation will be supported in a future Expressway release). The Expressway-C automatically includes the chat node aliases in the CSR, providing it has discovered a set of IM&P servers.
- For TLS b/w CUCM, IM-P & Exp-C
+ If using self-signed certificates on CUCM, IM/P. Load Cisco Tomcat, cup, cup-xmpp certificates from IM-P on Exp-C. Load callmanager, Cisco Tomcat certificates from CUCM on Exp-C.
+ If using Internal CA signed certificates on CUCM, IM/P. Load Root CA certificates on Exp-C.
+ Load CA certificate under tomcat-trust, cup-trust, cup-xmpp-trust on IM-P.
+ Load CA certificate under tomcat-trust, callmanager-trust on CUCM.
Expressway Edge (Exp-E)
- Signed by External CA
- Configured Unified Communications domain as Subject Alternate Name
- If using a cluster, select FQDN of this peer as CN and FQDN of Cluster + this peer as Subject Alternate Name.
- If XMPP federation is being deployed, enter the same Chat Node Aliases as entered in Exp-C.
For more details, please refer to the Certificate Creation Guide for Cisco Expressway x8.1.1
http://www.cisco.com/c/dam/en/us/td/docs/voice_ip_comm/expressway/config_guide/X8-1/Cisco-Expressway-Certificate-Creation-and-Use-Deployment-Guide-X8-1.pdf
- Aashish

Ask the Expert: Different Flavors and Design with vPC on Cisco Nexus 5000 Series Switches

Welcome to the Cisco® Support Community Ask the Expert conversation. This is an opportunity to learn and ask questions about Cisco® NX-OS.
The biggest limitation to a classic port channel communication is that the port channel operates only between two devices. To overcome this limitation, Cisco NX-OS has a technology called virtual port channel (vPC). A pair of switches acting as a vPC peer endpoint looks like a single logical entity to port channel attached devices. The two devices that act as the logical port channel endpoint are actually two separate devices. This setup has the benefits of hardware redundancy combined with the benefits offered by a port channel, for example, loop management.
vPC technology is the main factor for success of Cisco Nexus® data center switches such as the Cisco Nexus 5000 Series, Nexus 7000 Series, and Nexus 2000 Series Switches.
This event is focused on discussing all possible types of vPC along-with best practices, failure scenarios, Cisco Technical Assistance Center (TAC) recommendations and troubleshooting
Vishal Mehta is a customer support engineer for the Cisco Data Center Server Virtualization Technical Assistance Center (TAC) team based in San Jose, California. He has been working in TAC for the past 3 years with a primary focus on data center technologies, such as the Cisco Nexus 5000 Series Switches, Cisco Unified Computing System™ (Cisco UCS®), Cisco Nexus 1000V Switch, and virtualization. He presented at Cisco Live in Orlando 2013 and will present at Cisco Live Milan 2014 (BRKCOM-3003, BRKDCT-3444, and LABDCT-2333). He holds a master’s degree from Rutgers University in electrical and computer engineering and has CCIE® certification (number 37139) in routing and switching, and service provider.
Nimit Pathak is a customer support engineer for the Cisco Data Center Server Virtualization TAC team based in San Jose, California, with primary focus on data center technologies, such as Cisco UCS, the Cisco Nexus 1000v Switch, and virtualization. Nimit holds a master's degree in electrical engineering from Bridgeport University, has CCNA® and CCNP® Nimit is also working on a Cisco data center CCIE® certification While also pursuing an MBA degree from Santa Clara University.
Remember to use the rating system to let Vishal and Nimit know if you have received an adequate response.
Because of the volume expected during this event, Vishal and Nimit might not be able to answer every question. Remember that you can continue the conversation in the Network Infrastructure Community, under the subcommunity LAN, Switching & Routing, shortly after the event. This event lasts through August 29, 2014. Visit this forum often to view responses to your questions and the questions of other Cisco Support Community members.

Hello Gustavo
Please see my responses to your questions:
Yes almost all routing protocols use Multicast to establish adjacencies. We are dealing with two different type of traffic –Control Plane and Data Plane.
Control Plane: To establish Routing adjacency, the first packet (hello) is punted to CPU. So in the case of triangle routed VPC topology as specified on the Operations Guide Link, multicast for routing adjacencies will work. The hellos packets will be exchanged across all 3 routers and adjacency will be formed over VPC links
http://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus5000/sw/operations/n5k_L3_w_vpc_5500platform.html#wp999181
Now for Data Plane we have two types of traffic – Unicast and Multicast.
The Unicast traffic will not have any forwarding issues, but because the Layer 3 ECMP and port channel run independent hash calculations there is a possibility that when the Layer 3 ECMP chooses N5k-1 as the Layer 3 next hop for a destination address while the port channel hashing chooses the physical link toward N5k-2. In this scenario,N5k-2 receives packets from R with the N5k-1 MAC as the destination MAC.
Sending traffic over the peer-link to the correct gateway is acceptable for data forwarding, but it is suboptimal because it makes traffic cross the peer link when the traffic could be routed directly.
For that topology, Multicast Traffic might have complete traffic loss due to the fact that when a PIM router is connected to Cisco Nexus 5500 Platform switches in a vPC topology, the PIM join messages are received only by one switch. The multicast data might be received by the other switch.
The Loop avoidance works little different across Nexus 5000 and Nexus 7000.
Similarity: For both products, loop avoidance is possible due to VSL bit
The VSL bit is set in the DBUS header internal to the Nexus.
It is not something that is set in the ethernet packet that can be identified. The VSL bit is set on the port asic for the port used for the vPC peer link, so if you have Nexus A and Nexus B configured for vPC and a packet leaves Nexus A towards Nexus B, Nexus B will set the VSL bit on the ingress port ASIC. This is not something that would traverse the peer link.
This mechanism is used for loop prevention within the chassis.
The idea being that if the port came in the peer link from the vPC peer, the system makes the assumption that the vPC peer would have forwarded this packet out the vPC-enabled port-channels towards the end device, so the egress vpc interface's port-asic will filter the packet on egress.
Differences: In Nexus 5000 when it has to do L3-to-L2 lookup for forwarding traffic, the VSL bit is cleared and so the traffic is not dropped as compared to Nexus 7000 and Nexus 3000.
It still does loop prevention but the L3-to-L2 lookup is different in Nexus 5000 and Nexus 7000.
For more details please see below presentation:
https://supportforums.cisco.com/sites/default/files/session_14-_nexus.pdf
DCI Scenario: If 2 pairs are of Nexus 5000 then separation of L3/L2 links is not needed.
But in most scenarios I have seen pair of Nexus 5000 with pair of Nexus 7000 over DCI or 2 pairs of Nexus 7000 over DCI. If Nexus 7000 are used then L3 and L2 links are required for sure as mentioned on above presentation link.
Let us know if you have further questions.
Thanks,
Vishal

Ask the Expert: Cisco BYOD Wireless Solution: ISE and WLC Integration

With Jacob Ideji, Richard Hamby and Raphael Ohaemenyi
Welcome to the Cisco Support Community Ask the Expert conversation. This is an opportunity to learn and ask questions about the new Identity Solutions Engine (ISE) and Wireless LAN Controller (WLC) hardware/software, integration, features, specifications, client details, or just questions about Cisco's Bring-your-own device (BYOD) solution with cisco Experts Richard Hamby, Jacob Ideji, and Raphael Ohaemenyi. The interest in BYOD (Bring You Own Device) solutions in the enterprise has grown exponentially as guests and company users increasingly desire to use personal devices to access . Cisco BYOD enhances user experience and productivity while providing security, ease-of-administration, and performance. The heart of the Cisco wireless BYOD solution is Identity Solutions Engine (ISE) utilizing the Cisco Unified Wireless portfolio. Starting with ISE v1.1.1MR and WLC (Wireless LAN Controller) code v7.2.110.0 and higher, end-to-end wireless BYOD integration is reality.
Jacob Ideji is the technical team lead in the Cisco authentication, authorization and accounting (AAA) security team in Richardson, Texas. During his four years of experience at Cisco he has worked with Cisco VPN products, Cisco Network Admission Control (NAC) Appliance, Cisco Secure Access Control Server, and Dot1x technology as well as the current Cisco Identity Services Engine. He has a total of more than 12 years experience in the networking industry. Ideji holds CCNA, CCNP, CCSP, CCDA, CCDP, and CISM certifications from Cisco plus other industry certifications.
Richard Hamby works on the Cisco BYOD Plan, Design, Implement (PDI) Help Desk for Borderless Networks, where he is the subject matter expert on wireless, supporting partners in the deployment of Cisco Unified Wireless and Identity Services Engine solutions. Prior to his current position, Hamby was a customer support engineer with the Cisco Technical Assistance Center for 3 years on the authentication, authorization, accounting (AAA) and wireless technology teams.
Raphael Ohaemenyi Raphael Ohaemenyi is a customer support engineer with the authentication, authorization and accounting (AAA) team in the Technical Assistance Center in Richardson, Texas, where he supports Cisco customers in identity management technologies. His areas of expertise include Cisco Access Control Server, Cisco Network Admission Control (NAC) Appliance, Cisco Identity Services Engine, and IEEE 802.1X technologies. He has been at Cisco for more than 2 years and has worked in the networking industry for 8 years. He holds CCNP, CCDP, and CCSP certification.
Remember to use the rating system to let Jacob, Richard and Raphael know if you have received an adequate response.
Jacob, Richard and Raphael might not be able to answer each question due to the volume expected during this event. Remember that you can continue the conversation on the wireless mobility sub community forum shortly after the event. This event lasts through Oct 5th, 2012. Visit this forum often to view responses to your questions and the questions of other community members.

OOPS !!
I will repost the whole messaqge with the correct external URL's:
In general, the Trustsec design and deployment guides address the specific support for the various features of the 'whole' Cisco TS (and other security) solution frameworks. And then a drill-down (usually the proper links are embedded) to the specifc feature, and then that feature on a given device. TS 2.1 defines the use of ISE or ACS5 as the policy server, and confiugration examples for the platforms will include and refer to them.
TrustSec Home Page
http://www.cisco.com/en/US/netsol/ns1051/index.html
http://www.cisco.com/en/US/solutions/collateral/ns170/ns896/ns1051/product_bulletin_c25-712066.html
http://www.cisco.com/en/US/prod/collateral/vpndevc/ps5712/ps11637/ps11195/at_a_glance_c45-654884.pdf
I find this page very helpful as a top-level start to what features and capabilities exist per device:
http://www.cisco.com/en/US/solutions/ns170/ns896/ns1051/trustsec_matrix.html
The TS 2.1 Design Guides
http://www.cisco.com/en/US/solutions/ns340/ns414/ns742/ns744/landing_DesignZone_TrustSec.html
DesignZone has some updated docs as well
http://www.cisco.com/en/US/netsol/ns982/networking_solutions_program_home.html#~bng
As the SGT functionality (at this point) is really more of a router/LAN/client solution, the most detailed information will be in the IOS TS guides like :
http://www.cisco.com/en/US/docs/switches/datacenter/sw/6_x/nx-os/security/configuration/guide/b_Cisco_Nexus_7000_NX-OS_Security_Configuration_Guide__Release_6.x.html
http://www.cisco.com/en/US/docs/ios-xml/ios/sec_usr_cts/configuration/xe-3s/asr1000/sec-usr-cts-xe-3s-asr1000-book.html
http://www.cisco.com/en/US/docs/switches/lan/trustsec/configuration/guide/trustsec.html

Ask the Expert: Single-Site and Multisite FlexPod Infrastructure

With Haseeb Niazi and Chris O'Brien
Welcome to the Cisco Support Community Ask the Expert conversation. This is an opportunity to learn and ask questions about Single-Site and Multisite FlexPod Infrastructure with experts Haseeb Niazi and Chris O'Brien.
This is a continuation of the live webcast.
FlexPod is a predesigned and prevalidated base data center configuration built on Cisco Unified Computing System, Cisco Nexus data center switches, NetApp FAS storage components, and a number of software infrastructure options supporting a range of IT initiatives. FlexPod is the result of deep technology collaboration between Cisco and NetApp, leading to the creation of an integrated, tested, and validated data center platform that has been thoroughly documented in a best practices design guide. In many cases, the availability of Cisco Validated Design guides has reduced the time to deployment of mission-critical applications by 30 percent.
The FlexPod portfolio includes a number of validated design options that can be deployed in a single site to support both physical and virtual workloads or across metro sites for supporting high availability and disaster avoidance. This session covers various design options available to customers and partners, including the latest MetroCluster FlexPod design to support a VMware Metro Storage Cluster (vMSC) configuration.
Haseeb Niazi is a technical marketing engineer in the Data Center Group specializing in security and data center technologies. His areas of expertise also include VPN and security, the Cisco Nexus product line, and FlexPod. Prior to joining the Data Center Group, he worked as a technical leader in the Solution Development Unit and as a solutions architect in Advanced Services. Haseeb holds a master of science degree in computer engineering from the University of Southern California. He’s CCIE certified (number 7848) and has 14 years of industry experience.
Chris O'Brien is a technical marketing manager with Cisco’s Computing Systems Product Group. He is currently focused on developing infrastructure best practices and solutions that are designed, tested, and documented to facilitate and improve customer deployments. Previously, O'Brien was an application developer and has worked in the IT industry for more than 20 years.
Remember to use the rating system to let Haseeb and Chris know if you have received an adequate response.
Because of the volume expected during this event, Haseeb and Chris might not be able to answer every question. Remember that you can continue the conversation in the Data Center community, subcommunity Unified Computing shortly after the event. This event lasts through September 27, 2013. Visit this forum often to view responses to your questions and the questions of other Cisco Support Community members.
Webcast related links:
Single-Site and Multisite FlexPod Infrastructure - Slides from live webcast
Single-Site and Multisite FlexPod Infrastructure: FAQ from live webcast
Single-Site and Multisite FlexPod Infrastructure - Video from live webcast

I would suggest you read this white paper which details the pros and cons of direct connect storage.
http://www.cisco.com/en/US/partner/prod/collateral/ps10265/ps10276/whitepaper_c11-702584.html   This paper captures all the major design points for Ethernet and FC protocols.
I would only add that in FlexPod we are trying to create a highly available solution and "flexible" solution; Nexus switching helps us deliver on both with vPC and unified ports.
NPV equats to end-host mode which allows the system to present all of the servers as N ports to the external fabric. In this mode, the vHBAs are pinned to the egress interfaces of the fabric interconnects. This pinning removes the potential of loops in the SAN fabric. Host based multipathing of the vHBAs account for potential uplink failures. The NPV mode (end-host mode) simplifies the attachment of UCS into the SAN fabric and that is why it is in NPV mode by default.
So for your last question, I will have to put my Product Manager hat on so bear with me.   First off there is no drawback to enabling the NPIV feature (none that I am aware of) the Nexus 5000 platform simply offers you a choice to design and support multiple FC initiators (N-Ports) per F-Port via NPIV. This allows for the integration of the FI end-host mode described above. I imagine being a unfied access layer switch, the Nexus team enabled standard Fibre Channel switching capability and features first. The implementatin of NPIV is a customer choice based on their specific access layer requirements.
/Chris

Ask the Expert: Overview of Cisco Prime Service Catalog and Process Orchestrator Solutions

Welcome to this Cisco Support Community Ask the Expert conversation. This is an opportunity to learn and ask questions about the Cisco Prime Service Catalog and Process Orchestrator solutions.
Cisco expert Jason Davis will discuss Cisco’s network management products offered under the Cisco Prime framework. If you have questions about Cisco Prime infrastructure or data center automation with our Cisco Prime Service Catalog and Process Orchestrator solutions, join us on the Cisco Support Community.
Jason Davis is a distinguished services engineer in the Intelligent Infrastructure Practice team of Cisco Advanced Services. His role is to provide strategic and tactical consulting for hundreds of Advanced Services customers, lead service innovation, and assess new services and technologies. Jason's primary expertise areas are in network management systems, intelligent automation, virtualization, data center operations, software-defined networking, and network programmability.
Based out of the Research Triangle Park (RTP) campus, Jason is also responsible for administering the Research Triangle Park Network Management Lab, Cisco's largest network management lab.
Since joining Cisco in 1998, Jason has been a frequent speaker at Cisco's Networkers and CiscoLive conferences in the United States and Europe. In the past five years he has also been involved in the conference network setup and monitoring. He is a much sought-after resource by the field sales teams to assist with presales solutions and executive briefings. He has provided strategic and tactical network management consulting for several hundred customers.
Jason is a subject matter expert with the following products and features:
Cisco Prime LAN management solution
Cisco Prime infrastructure
CiscoSecure ACS
Cisco Prime Network Registrar
Cisco Process Orchestrator
Cisco Prime Service Catalog
Cisco IP SLA
Embedded Event Manager
SNMPv3
onePK and OpenFlow
Cisco UCS
Device instrumentation
VMware ESX, ESXi, and vCenter
ITIL
Jason received his bachelor of science degree in electrical engineering from the University of Miami (FL). He has been married for 20 years and has 4 children. His interests include providing audiovisual technical support for churches and conference venues, camping and biking with his family, remote-control helicopter piloting, paintball, and recreational shooting.
Remember to use the rating system to let Jason know if you have received an adequate response.
Because of the volume expected during this event, Jason might not be able to answer every question. Remember that you can continue the conversation in Data Center > Intelligent Automation under the subcommunity Cisco Prime Service Catalog shortly after the event. This event lasts through September 12, 2014. Visit this forum often to view responses to your questions and the questions of other Cisco Support Community members.

Hello Jason,
Thank you very much for welcoming me to your expert discussion :) I feel to be in the right place, at the right time. Thank you also for answering question beyond your scope here, much appreciated. The information received will help me to go further as such I have submitted a 5 start rating for your first reply.
That sounds promising about the LMS part so yes, I stay tuned and wait patiently.
Ok, now let’s revert to the actual topic discussed here. Cisco Prime Service Catalog and Process Orchestrator solutions I have briefly read up on this on CCO (where elseJ) and picked out the following quote
---- Quote from the Cisco Prime Service Catalog Data Sheet
Today’s end users want self-service and easy access to IT tools and services.
Simultaneously, organizations are seeking ways to extend their cloud management
platforms beyond self-service delivery of virtual machines and infrastructure resources
while increasing their use of cloud-based solutions to enhance business agility and effectiveness.
Cisco Prime™ Service Catalog offers tremendous benefits to organizations that want to unify the ways in
which all types of IT services are ordered and fulfilled, not just infrastructure requests
---- un quote ---
I try to understand what (at high level of course) happens in the back ground when an order is raised and which vendor solution your product can interact with.
As mentioned in the quoted text, this service catalogue goes beyond the standard infrastructure.
Let’s say, a user wants to deploy a new email services, or in your example, extends or create a new web-portal (i.e. for HR to view and manage holiday, staff absence and benefits).
Your solution will need to interact somehow with the 3rd party vendor application that is capable building such portal I believe.
Without disclosing to many information, I assume the portal is linked to backend VM,s that spin up requested resources (and more magic of course). Perhaps I am mixing this up with another cisco product where a user can go on the portal and spin up virtual Firewalls, virtual Routers can be provisioned in now time.
Out if interest; Is this product also known as Mozart? (project code within Cisco?)
I hope query is ok.
Best wishes
Markus

Ask the Experts :LAN Switching

With Matt Blanshard and Jane Gao
Welcome to the Cisco Support Community Ask the Expert conversation. This is an opportunity to ask your toughest layer 2 questions to two of the technical leaders of the San Jose LAN Switching team, Matt Blanshard and Jane Gao. Learn more about Spanning Tree, VTP, Trunking, Resilient Ethernet Protocol, IGMP Snooping, Private VLANS, Q-in-Q Tunneling, QoS, various switching platforms including all desktop switches, Metro Ethernet switches, 4500 and 6500 switches, Blade Center switches, and Nexus 7000 switches.
Matt Blanshard began his Cisco career as an intern in 2007. He is now a technical leader at the Cisco Technical Assistance Center on the LAN Switching team. He holds a bachelor's degree from the University of Phoenix in computer science, and has CCNA certification.
Jane Gao is a technical leader in the Lan Switching Technical Assistance Center (TAC) team in San Jose. She has been working with LAN switching technologies and supporting Cisco switching platforms Jane's Bio since 2009. Ms. Gao was previously a technical leader in the Wireless TAC team in San Jose. Prior to joining Cisco Ms. Gao was working in software development. She has a Master of Science degree in Computer Science from DePaul University in Chicago.
Remember to use the rating system to let Matt and Jane know if you have received an adequate response.
They might not be able to answer each question due to the volume expected during this event. Remember that you can continue the conversation on the Lan Switching and Routing discussion forum shortly after the event. This event lasts through August 12, 2011. Visit this forum often to view responses to your questions and the questions of other community members.

you can load you IOS from the tftpd32 , first donload tftpd32 from google its free, run it but make it sure that you have you IOS image bin file in you PC, then , follow these steps ,
STEP 1.
                Store the IOS image on the computer in any drive with its original name .
STEP2.
           Connect the Switch to the Computer through straight cable.
STEP 3.
             Come to the Switch , come in the enable or privilege mode by entering   enable
             Then come to the configuration mode , type config terminal push enter
           Now type interface fast Ethernet or giga Ethernet port what ever the port is connected to the PC , example interface fast Ethernet 0/1 then push enter
Now give ip address, like
Ip address 1.1.1.1 255.0.0.0   enter
No shut   enter
STEP 3 .
                 Come to the PC GO TO THE NETWORk CARD and give the ip address 1.1.1.2 subnet mask 255.0.0.0 gateway 1.1.1.0 nothing else.
STEP 4.
             Now download    tftpd32 you can get it on google download it AND RUN IT . AFTER THAT OPEN THE TFTP WHICH WILL BE ON DESKTOP , DOUBLE CLICK IT AND COME TO current directory and brows the IOS IMAGE FILE where you save that and select that it will then comes to the current directory , now below current directory you will see server interface , in front of that you will have to click show dir and see that the IOS file can be seen .
STEP 5. COME TO THE SWITCH AGAIN , GO in enable mode.
Type this.
                   Copy tftp flash. Push enter
                 It will ask you the name and address of remote host ?
Give the IP ADDRESS of the system , 1.1.1.2 and push enter .
Now it will ask you about the source file name ?
Copy the file name from pc where the IOS IMAGE which is saved on the PC and past on the switch and type.bin in the end and push enter.
Now the SWITCH will ask you about the destination file name , you can create your own name or use the same default name that is saved on the PC which you copy past on switch , after entering the name push enter. NOW WAIT FOR 10 MINUTES IF IT WILL ASK YOU SOMETHING PUSH ENTER AND WAIT FOR THE IMAGE TO UPLOAD.
AFTER THAT COME TO THE enable mode and type wr and the type reload and wait for the reboot process, in case you are using same destination file name as kept on the pc otherwise. Look below
If you have create your own choice name then,
Come to configuration mode , by typing config terminal push enter.
Type this command
   Boot system switch all flash:/new name that you have created and type.bin in the end push enter.
Now type exit come to the enable mode .
Type WR push enter.
Now run these commands for verification.
Show boot. ( after running this command check if the file name of the IOS is there then its ok )
Dir flash. ( after running this command check if the file name of the IOS is there then its ok )
Now TYPE THE LAST COMMAND
Reload and allow the switch to reboot and wait .

ASK THE EXPERTS : High Density Wireless Deployments and CleanAir Technology

with
Welcome to the Cisco Support Community Ask the Expert conversation. This is an opportunity to get an update on High Density Wireless Deployments and CleanAir technology with Cisco expert Fred Niehaus. Fred is a technical marketing engineer for the Wireless Networking Business Unit at Cisco, where he is responsible for developing and marketing enterprise wireless solutions using Cisco wireless LAN products. In addition to his participation in major deployments, Fred has served as technical editor for several Cisco Press books including the "Cisco 802.11 Wireless Networking Reference Guide" and "The Business Case for Enterprise-Class Wireless LANs." Prior to joining Cisco with the acquisition of Aironet, Fred was a support engineer for Telxon Corporation, supporting some of the very first wireless implementations for major corporate customers. Fred has been in the data communications and networking industry for more than 20 years and holds a Radio Amateur (Ham) License "N8CPI."
Remember to use the rating system to let Fred know if you have received an adequate response.
Fred might not be able to answer each question due to the volume expected during this event. Remember that you can continue the conversation on the shortly after the event. This event lasts through June 3, 2011. Visit this forum often to view responses to your questions and the questions of other community members.

You are correct, between the higher numbers of users with multiple devices the bandwidth requirements keep increasing.
The limitation of three non-overlapping channels in the 2.4 GHz space is driving more customers to 5 GHz, it is important to have both bands when high density deployments are needed. While many older devices only support 2.4 GHz, we are now seeing far more devices with 5 GHz as well.
The recomendation of 20-25 clients and 8 voice calls on a given 2.4 GHz channel is still a good "rule of thumb" with actual customer data requirements driving those numbers higher or lower. You are right when you say "throwing Access Points" at the problem can degrade the wireless quality as co-channel interference and overall noise floor can rise with multiple Access Points that can all hear each other.
A better approach to the problem is to throw more spectrum at this issue (using 5 GHz channels) and elements of 802.11n (20 MHz) bandwidth on 2.4 GHz.
What we have been doing in high density deployments is to try to minimize the propagation of a cell and focus it in a given direction. This can be done by
1. Managing the RF power of the radios (Access Points) and in some cases the client's power (using elements of CCX).
2. Using the right antennas to shape both Tx and Rx cell size to help isolate, we have recently introduced a new high gain antenna for stadiums that does this well.
3. Limit supported rates, obviously the higher the data rate the less sensitive the receiver is and the smaller the cell size becomes.
4. Enable 5 GHz (that adds far more channels for data throughput)
5. Limit the number of SSIDs in use as each requires a separate beacon (adding to RF utilization)
6. Co-locating access points with non-overlapping channels
There are some challenges, for example; many dual -band clients prefer to connect to 2.4 GHz, and 2.4 GHz is more likely to be busier and subject to interference, so we also enable Cisco "Band-Select" which basically "nudges" those clients off 2.4 GHz and pushes them to 5 GHz so as to free up the 2.4 GHz band when we can determine the client has 5 GHz capability.
So how is this done? well, we do this by listening to the clients and if we detect that the client is sending out probe requests on both bands we know the client can use 5 GHz so we essentially make the 5 GHz band "appear more attractive" to that client.
Note: Client load balancing and Band select are features in the Cisco Unified controller menu.
Also enabling client link (intelligent beam forming) helps direct the signal directly at the client and reduces same channel interference.

Ask the Experts: Single Sign-On with Cisco WebEx Meetings Server, Internet Reverse Proxy, and Enterprise License Manager Solutions

With Arun Kumar
Welcome to the Cisco Support Community Ask the Expert conversation. This is an opportunity to learn and ask questions about Single Sign-On (SSO) with Cisco WebEx Meetings Server (Cisco WMS), Internet Reverse Proxy (IRP), and Enterprise License Manager (ELM) solutions.
SSO standards such as Security Assertion Markup Language (SAML) 2.0 provide secure mechanisms for passing credentials and related information between different websites that have their own authorization and authentication systems. SSO enables simplified user authentication and management.
IRP provides public access, enabling users to host or attend meetings from the Internet and mobile devices. Although IRP is optional, Cisco encourages its use because it provides a better user experience for your mobile workforce.
Example question topics include:
SSO profiles and SAML 2.0 Identity providers (IdPs) supported in Cisco WMS
Basic configuration of IdPs
Interaction between IdPs and Cisco WMS
Difference between the cloud client implementation and Cisco WMS
Meeting access behavior in a split-horizon network topology with SSO
How to enable public access to Cisco WMS
Cisco WMS ELM operations
Cisco WMS ELM compared to other unified communications ELM or standalone ELM and compatibility/inoperability between them
Arun Kumar is a team lead in the San Jose Conferencing Technical Assistance Center. He has over eight years of experience in conferencing technology and specializes in Cisco Unified Meeting Place Express and Cisco WebEx Meeting Server. He joined Cisco in 2010 as an escalation engineer for the Cisco Telepresence group. Before joining Cisco he worked for the UK's third-largest internet service provider Supanet on VoIP technology and the *Nix domain. Kumar holds a master of science degree in computer science from Sikkim Manipal University in India, and he holds CCIE (Voice) and VMware Certified Professional certifications.
Remember to use the rating system to let Arun know if you have received an adequate response.
Arun might not be able to answer each question because of the volume expected during this event. Remember that you can continue the conversation on the Collaboration, Voice, and Video community Other Subjects subcommunity shortly after the event. This event lasts through Monday May 17, 2013. Visit this forum often to view responses to your questions and the questions of other Cisco Support Community members.

Hello Mobile Service,
CWMS and Jabber integrations:
http://www.cisco.com/en/US/docs/voice_ip_comm/jabber/Windows/9_1/JABW_BK_E4CC9599_00_environment-configuration-guide_chapter_01.html#JABW_TK_SF2ED5E1_00
In above link start from section: Set Up Cisco WebEx Meetings Server on Cisco Unified Presence
then move to section: Add Cisco WebEx Meetings Server to a Profile
Once done, move to section: Specify Conferencing Credentials in the Client side. You will see above server already listed there, just go ahead and enter your username and password (pleae make sure this user already exists on your CWMS) and accept any certificate/s if presented. Jabber Integration is done and you can start testing the same.
Attached CWMS - AFDS integration doc.
Please let me know if any furhter question.
Thanks, Arun

Ask the Expert: Identity Services Engine - 802.1x, Identity Management and BYOD

Welcome to this Cisco Support Community Ask the Expert conversation. This is an opportunity to learn and ask questions about Cisco Identity Service Engine (ISE) with subject matter expert Nicolas Darchis.
Cisco Identity Service Engine is a security policy management and control platform that automates and simplifies access control and security compliance for wired, wireless, and VPN connectivity. It is primarily used to provide secure access and guest access, support BYOD initiatives, and enforce usage policies in conjunction with Cisco TrustSec.
Nicolas Darchis is a wireless and authentication, authorization, and accounting expert for the Technical Assistance Center at Cisco Europe. He has been troubleshooting wireless networks, wireless management tools, and security products, including Cisco Secure Access Control Server, since 2007. He also focuses on filing technical and documentation bugs. Darchis holds a bachelor's degree in computer networking from the Haute Ecole Rennequin Sualem and a master's degree in computer science from the University of Liege. He also holds CCIE Wireless certification (no. 25344).
Remember to use the rating system to let Nicolas know if you have received an adequate response.
Because of the volume expected during this event, our expert might not be able to answer every question. Remember that you can continue the conversation in the Security community under subcommunity AAA, Identity, and NAC shortly after the event. This event lasts through June 20, 2014. Visit this forum often to view responses to your questions and the questions of other Cisco Support Community members.

Hi.
1) It is not "ISE loses the credentials and asks for web portal again". Once a user is authenticated, it is authenticated as long as it stays connected. Possibilities are :
-You are returning a session timeout (attribute radius 27) in the authz profile of the user. Therefore user has to reauthenticate after X seconds. But you would see a pattern, then.
-Over wireless, many clients are not capable of doing fast roaming (smartphones is the biggest example) and will therefore reauthenticate with dot1x everytime they roam. A small coverage hole would be enough for the cached credentials to disappear and web portal to show up again
-Over wired, this cannot really occur but the idea is that it's probably the switch resetting the connection and contacting ISE again. The idea to troubleshoot this is to monitor the access device (WLC/switch) and check if the port goes up/down, if the MAB session gets reset or something and why.
2) The captive bypass issue is that Apple devices will probe apple.com website to check if there is internet connectivity. If they can reach it, then fine, if they sense that they are redirected, they open a small window pop up with the login portal. The problem (and I still cannot understand why) is that this is not Safari, it's some nameless feature-less browser that doesn't work properly.
By enabling the captive bypass feature, the WLC intercepts the requests to the Apple testpage and replies with HTTP OK. The apple device then thinks "ok I have internet connectivity" and it's up to the user to bring up a real browser to login to the portal page.
It therefore does not affect non-Apple device to have the feature enabled.
The problem is that in IOS 7.x, Apple decided to not just use Apple.com anymore but a whole list of testpages on different websites.
3) "whether it would solve the issue if I added certificate authentication as a secondary option, with eap-tls as the primary"
=> This is disturbing because EAP-TLS is a certificate authentication method. But ISE message seems to imply that the user is hitting an authnetication rule that only provides PEAP or EAP-FAST with mschap or something similar ...
If you have the windows default supplicant you have close to no control on what the client will submit. I can imagine that moving from wired to wireless, the laptop would sometimes try to send password instead of certificate and/or vice-versa. Anyconnect with fixed network profiles would solve the problem elegantly.
I cannot comment on your auth policies as I do not know them :-)
Regards,
Nicolas

Ask the Expert: Basic Introduction and Troubleshooting on Cisco Nexus 7000 NX-OS Virtual Device Context

With Vignesh R. P.
Welcome to the Cisco Support Community Ask the Expert conversation.This is an opportunity to learn and ask questions of Cisco expert Vignesh R. P. about the Cisco® Nexus 7000 Series Switches and support for the Cisco NX-OS Software platform .
The Cisco® Nexus 7000 Series Switches introduce support for the Cisco NX-OS Software platform, a new class of operating system designed for data centers. Based on the Cisco MDS 9000 SAN-OS platform, Cisco NX-OS introduces support for virtual device contexts (VDCs), which allows the switches to be virtualized at the device level. Each configured VDC presents itself as a unique device to connected users within the framework of that physical switch. The VDC runs as a separate logical entity within the switch, maintaining its own unique set of running software processes, having its own configuration, and being managed by a separate administrator.
Vignesh R. P. is a customer support engineer in the Cisco High Touch Technical Support center in Bangalore, India, supporting Cisco's major service provider customers in routing and MPLS technologies. His areas of expertise include routing, switching, and MPLS. Previously at Cisco he worked as a network consulting engineer for enterprise customers. He has been in the networking industry for 8 years and holds CCIE certification in the Routing & Switching and Service Provider tracks.
Remember to use the rating system to let Vignesh know if you have received an adequate response.
Vignesh might not be able to answer each question due to the volume expected during this event. Remember that you can continue the conversation on the Data Center sub-community discussion forum shortly after the event. This event lasts through through January 18, 2013. Visit this forum often to view responses to your questions and the questions of other community members.

Hi Vignesh
Is there is any limitation to connect a N2K directly to the N7K?
if i have a an F2 card 10G and another F2 card 1G and i want to creat 3 VDC'S
VDC1=DC-Core
VDC2=Aggregation
VDC3=Campus core
do we need to add a link between the different VDC's
thanks

Ask the Expert : Initial Set Up and LAN Connectivity for Cisco UCS Servers

Similar Messages

Maybe you are looking for