ASM instance removal not happening: showing ora.asm still runing

I am trying to remove the ASM instance, though the ASM instance is down, still it shows resouce ora.asm is running.
Could you please help me to remove the ASM instance.
oracle@tbardbb2:/usr/home/rcummins> srvctl remove ASM -n tbardbb2
-n option has been deprecated and will be ignored.
PRCR-1025 : Resource ora.asm is still running
Now I stopped the resource: crsctl stop resource ora.asm -n tbardbb2 -f
now while deleting it shows:
oracle@tbardbb2:/usr/home/rcummins> srvctl remove asm -n tbardbb2
-n option has been deprecated and will be ignored.
PRCR-1001 : Resource ora.asm does not exist
How will I check if my ASM instance is removed..
Edited by: 784786 on Jul 29, 2011 5:26 PM

784786 wrote:
I am trying to remove the ASM instance, though the ASM instance is down, still it shows resouce ora.asm is running.
Could you please help me to remove the ASM instance.
oracle@tbardbb2:/usr/home/rcummins> srvctl remove ASM -n tbardbb2
-n option has been deprecated and will be ignored.
PRCR-1025 : Resource ora.asm is still running
Now I stopped the resource: crsctl stop resource ora.asm -n tbardbb2 -f
now while deleting it shows:
oracle@tbardbb2:/usr/home/rcummins> srvctl remove asm -n tbardbb2
-n option has been deprecated and will be ignored.
PRCR-1001 : Resource ora.asm does not exist
How will I check if my ASM instance is removed..
Edited by: 784786 on Jul 29, 2011 5:26 PM
HI,
Please read note How to remove an ASM instance and its corresponding database(s) on UNIX [ID 357261.1] for the details
CHeers

Similar Messages

After writing an html report on a floppy disk and removing it, labview shows an error message window: disk not present

after writing an html report on a floppy disk and removing it, labview shows an error message window: disk not present.
My pc is based on asus motherboard. Labview 7 and Windows 2000 sp4 installed.
The error message continue also if i stop the application that generated report on a: .
I've got this problem only on a pc: on other machines i don't have this problem (Labview only continues to access floppy but it doesn't show any window).
Find below an example: first press the button to create a report on a: then remove the floppy, after 30-35 sec i've got the error message
Attachments:
prova.vi ‏55 KB

Hi,
I tried your vi: I don't get any error message after removing the disk but LV7 keeps on accessing the drive at regular intervals even if you stop the vi and close it!!! This is not supposed to happen.
The only way to stop it is exit LV7.
If you don't use the file dialog and you wire a full path, you don't get any problem.
I also created a very simple vi that conditionally writes a text file on a: and I got the same behaviour.
This problem occurs only with LV7, I tried the same examples in LV6.1 and everything was fine.
If anybody wants to try I attach this simple example,
Alberto
Attachments:
salva_testo1.vi ‏22 KB

I updated Firefox and now it will not open at all. The hourglass shows that it's working but then nothing. I went to add/remove and removed mozilla and reinstalled it and still the same thing. It worked fine before I updated.

I updated Firefox and now it will not open at all. The hourglass shows that it's working but then nothing. I went to add/remove and removed mozilla and reinstalled it and still the same thing. It worked fine before I updated. Now I can't even remove the program at all. Why is this happening?

Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
Create a new profile as a test to check if your current profile is causing the problems.
See "Basic Troubleshooting: Make a new profile":
*https://support.mozilla.com/kb/Basic+Troubleshooting#w_8-make-a-new-profile
There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins" in case there are still problems.
If that new profile works then you can transfer some files from the old profile to that new profile, but be careful not to copy corrupted files.
See:
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

Availibility check not happening after credit block is removed for order

Hi All,
When we are removing the credit block on a sales order through report RVKRED09, the availibility check is not performed again because the qty in sales order is not confirmed.
As per my understanding when the report RVKRED09 is run, the sales order is called in background and the credit status is changed and then subsequently, the user exit MV45AFZF is called. In this exit, the values in wa-ybuk-cmgst is compared against wa-xbuk-cmgst. if i think wa-ybuk-cmgst is A and wa-xbuk-cmgst is B, then it means the credit blocked is removed and the return code is 8 which means availibility check is to be performed.
However in our case availibility check is not happening since the values of wa-ybuk-cmgst and wa-xbuk-cmgst are same which is B i..e the credit block is not removed...but however the report RVKRED09 shows that cedit status is changed.
Something is happening somwhere which is causing this. could any one guide. Also what is the program name which confirms the availibility check in sales order and also what is the program name which changes the credit status for a sales order in VBUK table.
regards
sachin

Hi
So as per your query , you have gone with the user exit in the program MV45AFZF , so check wheather any subprogram has been included where availability check wont happen.So just take the help of ABAP;er and then check wheather any program has been included related to availability check.
Regards
Srinath

ORA-01092: ORACLE instance terminated. Disconnection forced ORA-00942: table or view does not exist on 12C RAC

Hi Geeks,
I have encountered an issue while starting up my database on 12c RAC.
Till mount it goes fine but when i attempt to open it throws me an error.
Total System Global Area 1.5400E+10 bytes
Fixed Size                  4737560 bytes
Variable Size            2952791528 bytes
Database Buffers         1.2415E+10 bytes
Redo Buffers               26857472 bytes
Database mounted.
SQL> alter database open;
alter database open
ERROR at line 1:
ORA-01092: ORACLE instance terminated. Disconnection forced
ORA-00942: table or view does not exist
Process ID: 11338068
Session ID: 1429 Serial number: 3
Here is the trace file output...
ORACLE_HOME = /oracle_home/app/orahome
System name:    AIX
Node name:      INS1
Release:        1
Version:        7
Machine:        00C8CCA74C00
Instance name: INST1
Redo thread mounted by this instance: 1
Oracle process number: 7
Unix process pid: 20381876, image: oracle@ins1 (TNS V1-V3)
*** 2014-11-27 22:49:20.892
*** SESSION ID:(197.5) 2014-11-27 22:49:20.892
*** CLIENT ID:() 2014-11-27 22:49:20.892
*** SERVICE NAME:() 2014-11-27 22:49:20.892
*** MODULE NAME:(sqlplus@ins1 (TNS V1-V3)) 2014-11-27 22:49:20.892
*** ACTION NAME:() 2014-11-27 22:49:20.892
2014-11-27 22:49:20.889716 : Start recovery for domain=0, valid=0, flags=0x4
*** 2014-11-27 22:49:24.580
Successfully allocated 32 recovery slaves
Using 3 overflow buffers per recovery slave
*** 2014-11-27 22:49:24.740
Thread 1 checkpoint: logseq 15, block 2, scn 3510749
cache-low rba: logseq 15, block 3
    on-disk rba: logseq 15, block 72, scn 3510824
start recovery at logseq 15, block 3, scn 0
*** 2014-11-27 22:49:24.981
Started resilvering redo thread 1 seq 15 blocks 72-73
*** 2014-11-27 22:49:24.994
Completed resilvering redo thread 1 seq 15
*** 2014-11-27 22:49:24.994
Started writing zeroblks thread 1 seq 15 blocks 74-81
*** 2014-11-27 22:49:24.994
Completed writing zeroblks thread 1 seq 15
==== Redo read statistics for thread 1 ====
Total physical reads (from disk and memory): 4096Kb
-- Redo read_disk statistics --
Read rate (ASYNC): 35Kb in 0.25s => 0.14 Mb/sec
Longest record: 0Kb, moves: 0/104 (0%)
Longest LWN: 2Kb, moves: 0/33 (0%), moved: 0Mb
Last redo scn: 0x0000.0035922b (3510827)
----- Recovery Hash Table Statistics ---------
Hash table buckets = 262144
Longest hash chain = 1
Average hash chain = 25/25 = 1.0
Max compares per lookup = 1
Avg compares per lookup = 151/176 = 0.9
*** 2014-11-27 22:49:25.007
KCRA: start recovery claims for 25 data blocks
*** 2014-11-27 22:49:25.039
KCRA: blocks processed = 25/25, claimed = 25, eliminated = 0
*** 2014-11-27 22:49:25.054
Recovery of Online Redo Log: Thread 1 Group 6 Seq 15 Reading mem 0
*** 2014-11-27 22:49:25.060
Completed redo application of 0.02MB
*** 2014-11-27 22:49:25.235
Completed recovery checkpoint
----- Recovery Hash Table Statistics ---------
Hash table buckets = 262144
Longest hash chain = 1
Average hash chain = 25/25 = 1.0
Max compares per lookup = 1
Avg compares per lookup = 176/176 = 1.0
Recovery sets nab of thread 1 seq 15 to 74 with 8 zeroblks
*** 2014-11-27 22:49:26.000
2014-11-27 22:49:26.000433 : Validate domain 0
2014-11-27 22:49:26.001348 : Validated domain 0, flags = 0x0
*** 2014-11-27 22:49:28.315
Count of ofsmtab$: 0 entries
*** 2014-11-27 22:49:28.732
ORA-00942: table or view does not exist
ORA-00942: table or view does not exist
*** 2014-11-27 22:49:28.738
USER (ospid: 20381876): terminating the instance due to error 942

In my case the issue has fixed by executing the following..
grant SELECT on SYS.USER$ to XDB;
grant SELECT on SYS.USER$ to CTXSYS;
grant SELECT on SYS.USER$ to DVSYS;
grant SELECT on SYS.USER$ to LBACSYS;
grant SELECT on SYS.USER$ to APEX_040200;
grant SELECT on SYS.USER$ to DV_SECANALYST;
Refer the above screen shot...

When I watch tv shows in Front Row that I've bought off iTunes the audio gradually falls out of sync with the video. It does not happen with other files that I have converted into mp4s. Any ideas for fixing this? It's a huge bummer...

When I watch tv shows in Front Row that I've bought off iTunes the audio gradually falls out of sync with the video. It does not happen with other files that I have converted into mp4s. Any ideas for fixing this? It's a huge bummer...

I too have the same problem. The audio drop out of sync in about 5 sec in not uncommon for the audio to be 30+ sec behind video. Apple needs to fix this!!!!!!!!!!!!!!!! its a joke, my iphone is all messed up after the last update as well. at one time not to long ago apple products and software were top rated, not so much any more, more and more problems are showing up and apple is unwilling or unalbe to fix the many issues. Apple needs to fix the audio sync problem, it not the computer hardware or other software it ITUNES!!!!, there is no workaround other then hitting pause and hitting pause and hitting pause to temp fix the problem.

How do I download a slide show with captions and music to my IPad? It is not happening when I sync.

How do I download a slide show with captions and music to my IPad? It is not happening when I sync.

The way that you would transfer photos from iPhoto to the iPad would be to sync with iTunes. Connect the iPad to your Mac with the cable and launch iTunes. Select your iPad under the devices heading on the left. Then click on the Photos tab in the iTunes window on the right. You can select the folder from which you want to sync your photos in the drop down menu bar - so select iPhoto there. Then select the album or events that you want to sync from the windows below. After you have made your selections, click on Apply in the lower right corner of iTunes.
I am not sure how the iPad will handle a slide show in the photos app that was created on your Mac. You can create basic slide shows on the iPad using the different albums, events or faces that you have in the Photo app, but as for the captioning that you have already set up, I don't know how that will work in the app when you sync the slide show.

Hi I have two macbook pro, i connected one from another via lan cable , now when i removed it, its showing me some pop up again and again saying server may not exists and there was a problem connecting to ishan's macbook pro

Hi I have two macbook pro, i connected one from another via lan cable , now when i removed it, its showing me some pop up again and again saying server may not exists and there was a problem connecting to ishan's macbook pro

If you just reboot it, does the problem go away?

My icloud emails arent arriving most of the time and a few days ago my iphone and ipad started showing "Can't Get Mail" box. This has not happened before since I set up the iclud email address with the purchase of my ipad about a month ago.

My icloud emails arent arriving most of the time and a few days ago my iphone and ipad started showing "Can't Get Mail" box. This has not happened before since I set up the iclud email address with the purchase of my ipad about a month ago.

That's one of the weird things.. it recognizes it maybe 10% of the time. And usually, only after I do the two-button reset. Problem is.. since it won't charge above 2%, anytime I try to do a restore or anything like that using iTunes, my device shuts off and I lose whatever progress I'd made.
So, an update... after reading through a bunch of similar complaints (there are literally 1000's of them so there's NO WAY this isn't somehow ios7 related, thanks a lot APPLE ) I decided to try a restore in recovery mode. After 3 hours and several disconnections... I ended up having to just set it up as a new iPad, as the restore did nothing. Weirdly though... as I was doing the restore in recovery mode.. I noticed I'd gotten up to a 10% charge.. higher than it's been since September, so after setting it up as a new device, I turned it off and plugged it in using the wall charger. 2 hours later and I was up to 38%. Still not great, as my iPad, before ios7 could've fully charged twice in the amount of time it took for me to now get 28% more of a charge. And that's with a fully cleaned out device.. so that really ***** and I'm now more confused than ever.
But I'm gonna leave it overnight charging and see what I come up with tomorrow. Sadly, when I paid $600 for it in February, I never expected to have to play "wait and see" with it...

When I press the tab button all my bookmarks in a list show- How do i make this not happen?

When I press the tab button to open a new page, all my bookmarks in a list show- How do i make this not happen? It should be a blank page correct or the home page?

''cweb [[#question-1048679|said]]''
<blockquote>
When I press the tab button to open a new page, all my bookmarks in a list show- How do i make this not happen? It should be a blank page correct or the home page?
</blockquote>
Ok delete this questions I figured it out in add on settings

Listener (and database instance) does not starts up automatically: ORA-12514: TNS:listener does not currently know of service requested in connect descriptor

Hi at all.... I'm a newbie with database oracle.,
I have the follow problem:
I installed Oracle Database 11g R2 XE on my guest operating system CentOS 6.5.
I have changed the hostname in my SO CentOS (where is installed oracle 11g R2 XE) after installation was completed successfully.
-) Before and during installation the hostname was localhost.
-) After installation I changed the hostname in VMCentOS
From the moment I changed the hostname, nothing starts up automatically. In particular, the listener and the database instance does not starts up automatically.
When I starts up the listener manually and I try to connect to database instance with SQLPLUS i get this error:
ORA-12514: TNS:listener does not currently know of service requested in connect descriptor
I think that the problem is due to the changed hostname because I, for testing and debugging purpose, re-installed a new OS CentOS virtual machine, re-installed oracle database 11g and I have not got that problem. The database instance and the listener starts up automatically!
Can any one tell me if maybe the problem is related to the hostname changed? ... and Why?
P.S.: After changed the hostname I have also modified the listener.ora and the tnsnames.ora by modifying the HOST with the correct hostname.

-) Output of command chkconfig (there isn't any line oracle-xe 0:off   1:off 2:on 3:on 4:on 5:on 6:off):
[oracle@VMCentOS /]$ chkconfig
NetworkManager     0:off    1:off    2:on    3:on    4:on    5:on    6:off
abrt-ccpp          0:off    1:off    2:off    3:on    4:off    5:on    6:off
abrtd              0:off    1:off    2:off    3:on    4:off    5:on    6:off
acpid              0:off    1:off    2:on    3:on    4:on    5:on    6:off
atd                0:off    1:off    2:off    3:on    4:on    5:on    6:off
auditd             0:off    1:off    2:on    3:on    4:on    5:on    6:off
blk-availability    0:off    1:on    2:on    3:on    4:on    5:on    6:off
bluetooth          0:off    1:off    2:off    3:on    4:on    5:on    6:off
cpuspeed           0:off    1:on    2:on    3:on    4:on    5:on    6:off
crond              0:off    1:off    2:on    3:on    4:on    5:on    6:off
cups               0:off    1:off    2:on    3:on    4:on    5:on    6:off
dnsmasq            0:off    1:off    2:off    3:off    4:off    5:off    6:off
firstboot          0:off    1:off    2:off    3:on    4:off    5:on    6:off
haldaemon          0:off    1:off    2:off    3:on    4:on    5:on    6:off
htcacheclean       0:off    1:off    2:off    3:off    4:off    5:off    6:off
httpd              0:off    1:off    2:off    3:off    4:off    5:off    6:off
ip6tables          0:off    1:off    2:on    3:on    4:on    5:on    6:off
iptables           0:off    1:off    2:on    3:on    4:on    5:on    6:off
irqbalance         0:off    1:off    2:off    3:on    4:on    5:on    6:off
jexec              0:off    1:on    2:on    3:on    4:on    5:on    6:off
kdump              0:off    1:off    2:off    3:on    4:on    5:on    6:off
lvm2-monitor       0:off    1:on    2:on    3:on    4:on    5:on    6:off
mdmonitor          0:off    1:off    2:on    3:on    4:on    5:on    6:off
messagebus         0:off    1:off    2:on    3:on    4:on    5:on    6:off
netconsole         0:off    1:off    2:off    3:off    4:off    5:off    6:off
netfs              0:off    1:off    2:off    3:on    4:on    5:on    6:off
network            0:off    1:off    2:on    3:on    4:on    5:on    6:off
ntpd               0:off    1:off    2:off    3:off    4:off    5:off    6:off
ntpdate            0:off    1:off    2:off    3:off    4:off    5:off    6:off
portreserve        0:off    1:off    2:on    3:on    4:on    5:on    6:off
postfix            0:off    1:off    2:on    3:on    4:on    5:on    6:off
psacct             0:off    1:off    2:off    3:off    4:off    5:off    6:off
quota_nld          0:off    1:off    2:off    3:off    4:off    5:off    6:off
rdisc              0:off    1:off    2:off    3:off    4:off    5:off    6:off
restorecond        0:off    1:off    2:off    3:off    4:off    5:off    6:off
rngd               0:off    1:off    2:off    3:off    4:off    5:off    6:off
rsyslog            0:off    1:off    2:on    3:on    4:on    5:on    6:off
saslauthd          0:off    1:off    2:off    3:off    4:off    5:off    6:off
smartd             0:off    1:off    2:off    3:off    4:off    5:off    6:off
snmpd              0:off    1:off    2:off    3:off    4:off    5:off    6:off
snmptrapd          0:off    1:off    2:off    3:off    4:off    5:off    6:off
spice-vdagentd     0:off    1:off    2:off    3:off    4:off    5:on    6:off
sshd               0:off    1:off    2:on    3:on    4:on    5:on    6:off
sysstat            0:off    1:on    2:on    3:on    4:on    5:on    6:off
udev-post          0:off    1:on    2:on    3:on    4:on    5:on    6:off
vmware-tools       0:off    1:off    2:on    3:on    4:on    5:on    6:off
vmware-tools-thinprint    0:off    1:off    2:on    3:on    4:on    5:on    6:off
wdaemon            0:off    1:off    2:off    3:off    4:off    5:off    6:off
winbind            0:off    1:off    2:off    3:off    4:off    5:off    6:off
wpa_supplicant     0:off    1:off    2:off    3:off    4:off    5:off    6:off
[oracle@VMCentOS /]$
Moreover in /etc/sysconfig there isn't any file oracle-xe!!!
At this point, I suspect that something in the installation I mistook.

Order is showing in T code# VKM3, which should not happen.

Client using automatic credit check. Customer maintained credit master data for which system is doing credit check. As per client requirement the future orders created for this customer system should not do a credit check.
For this we have created a new risk category and in the T code #ova8 , unchecked all the settings for this combination of credit control area, risk category and credit group. We maintained the new risk category in the credit master data of that customer, and created a new order and found that the system is not doing any credit check and system is allowing for the billing. However when but this order is showing in T code# VKM3, which should not happen.

Hi- SAP always shows orders in VKM3 even though they do not have credit hold... SAP lists all orders which have item cat deliver or billing relevant..
Reg
Siva

Process instances do not show in BPEL Console

Hi all,
I have a BPEL, which reads a files from a particular folder if any, Process records in that file and then stores it in database.
I am facing a problem, my records gets processed, this BPEL works fine, as i can see the output in database, however associated instances are not shown in the BPEL Console. But if i restart the process (i.e. Switch OFF the process and Again Switch ON) it shows me all the previous instances and also the current instances. But sometime again this problem occurs.
Has anyone faced the same issue? Please let me know in case anyone has solution.
Thanks in advance.

[http://download.oracle.com/technology/tech/soa/soa_best_practices_1013x_drop3.pdf|http://download.oracle.com/technology/tech/soa/soa_best_practices_1013x_drop3.pdf] I found below in SOA best practices guide:
Why Does the Instance of an Invoked Process Not Display in Oracle BPEL Control?
If the process invoked is asynchronous, the message headers and payload are stored in
the invoke_message table. The invocation message is then processed by a
background thread to create an asynchronous BPEL process instance. If an error is
encountered while processing the invocation message, the transaction is rolled back
and the invoke message remains in its unhandled state in the invoke_message table.
See "How Does an Invoke Message and Activity Display in the Manual Recovery
Page?" on page 1-18 for more details on this scenario.
If the process invoked is synchronous, the cause for the missing instance is likely a
transaction rollback. The reasons for a transaction rollback are as follows:
■ Third party manipulation of the JTA transaction. As described in "How Do I Force
a Rollback in a BPEL Flow?" on page 1-5, a failed database adapter invocation can
cause the TopLink layer to mark the JTA transaction for rollback. Because Oracle
BPEL Server relies on the JTA transaction for persistence (not just as a signaling
mechanism between transaction-aware modules), any changes to the status of the
transaction impact Oracle BPEL Server’s ability to dehydrate the instance.
■ Transaction timeout. The synchronous process may be invoking one or more
backend synchronous services; the total time of all the backend calls may exceed
the timeout value for the transaction. See "How Do I Modify Transaction Timeout
Settings for Oracle BPEL Server?" on page 1-9 for details on how to increase the
transaction timeout value.
■ Failure to dehydrate the synchronous instance to the database. If the
completionPersistPolicy is set to on, the instance attempts to save itself
before returning to the caller. Typically, errors are encountered during this step if
the database connection has been severed or the tablespace is full. Some customers
Transactions
Oracle BPEL Process Manager 1-9
have encountered problems with saving the audit trail of the instance. For
example, there are problems with JDBC batching in 10.1.3.1.0 that the audit trail
persistence code uses. When a synchronous invocation does not result in an
instance visible from Oracle BPEL Control (assuming that
completionPersistPolicy is set to a value of on, deferred, or faulted),
use the following steps to find the underlying error:
– Enable all loggers to debug mode.
– Resubmit the invocation message.
– Check the Oracle Process Manager and Notification Server (OPMN) or
command-line log for the underlying exception stack trace.
Please refer to link below:
http://download.oracle.com/technology/tech/soa/soa_best_practices_1013x_drop3.pdf

Device Removal Schedule not happening

Not sure where to post this, I'm happy for someone to tell me which sub would have been better.
I've recently discovered a few issues with our managed devices, the first is the Device Removal Schedule, it's not happening. I have it set to remove after 90 days but there are devices still in there that are much older. Any tips on how to fix it would be much appreciated.
In the meantime, is there a way to run it manually?

manng228,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/

Email messages from my icloud account update on all my devices showing if they have been read and if a reply has been sent. This does not happen with my tinyworld (TalkTalk) email account. Can I (how can I) get this to work with TinyWorld?

Email messages from my icloud account update on all my devices showing if they have been read and if a reply has been sent. This does not happen with my tinyworld (TalkTalk) email account. Can I (how can I) get this to work with TinyWorld?

You have to look at the email protocol being used. the Apple email system uses IMAP, does Tinyworld use IMAP or POP?
Does the email system permit delivery receipts to be requested?
Just some of the things one needs to determine from the information provided by the email service provider.

ASM instance removal not happening: showing ora.asm still runing

Similar Messages

Maybe you are looking for