Asmlib and VX DMP

setup a dg and raw volumes in Veritas to use as ASM. I was able to createdisk on them and see them ok, however after reboot they don't show up, and I suspect is an issue with scandisk, judging by the logs.
# oracleasm querydisk /dev/vx/dsk/mon2a-raw/raw-data1
Device "/dev/vx/dsk/mon2a-raw/raw-data1" is marked an ASM disk with the label "DATA1"
There are several others, all of which can be seen with querydisk. However when I try and run scandisks it hangs for 10-15 minutes, and the oracleasm log is looking up bogus VxVM devices -
Creating /dev/oracleasm mount point: /dev/oracleasm
Loading module "oracleasm": oracleasm
Mounting ASMlib driver filesystem: /dev/oracleasm
Reloading disk partitions: done
Cleaning any stale ASM disks...
Scanning system for ASM disks...
oracleasm-read-label: Unable to open device "/dev/VxDMP1": No such file or directory
oracleasm-read-label: Unable to open device "/dev/VxDMP1": No such file or directory
oracleasm-read-label: Unable to open device "/dev/VxDMP1": No such file or directory
oracleasm-read-label: Unable to open device "/dev/VxDMP1": No such file or directory
oracleasm-read-label: Unable to open device "/dev/VxDMP1p1": No such file or directory
oracleasm-read-label: Unable to open device "/dev/VxDMP1p1": No such file or directory
oracleasm-read-label: Unable to open device "/dev/VxDMP1p1": No such file or directory
oracleasm-read-label: Unable to open device "/dev/VxDMP1p1": No such file or directory
I've tried updating /etc/sysconfig/oracleasm to reflect the DMP style naming, but am not sure this is even close to correct - the only documentation I've been able to find is for multipath with Linux.
# ORACLEASM_SCANORDER: Matching patterns to order disk scanning
ORACLEASM_SCANORDER="vx"
# ORACLEASM_SCANEXCLUDE: Matching patterns to exclude disks from scan
ORACLEASM_SCANEXCLUDE="VxVM"

Thanks Wim. Thanks a lot. You are the only one who gave me the right answer on what I was asking
almost three years. In fact, you've just confirmed what I always thought (or at least suspected).
Namely, after having examined the raw driver source code on Linux kernel source tree as well as
Stephen Tweedie's `raw' binding utility, I was continuously trying to convince my colleagues that
Linux raw-bound device interface was nothing else but a fatamorgana, a mirage of something called
"Sun Solaris native raw character device interface", doing nothing else but opening a block device
with O_DIRECT. Thanks a lot.
So, if I got you right, using ASM on Linux implies that setting Oracle startup parameters
'disk_asynch_io=TRUE' and 'filesystemio_options=SETALL' is obsolete (redundant), except in the case
that traditional Oracle filesystem is combined with ASM.
One more question, please, and I'll finish. If ASMLib is just an add-on module with primary function
to simplify the management and discovery of ASM disks, but doesn't necessarily give us much of an io
performance benefit, as you wrote, why does it exist only for Linux? There is no ASMLib for other
unixes (Solaris, AIX, HP-UX etc). Only for Linux. Why would be the management and discovery of ASM
disks more complicated on Linux than on other unixes, so that we need ASMLib only for Linux?
Hundred times - thanks a lot.
Regards
N.J.

Similar Messages

Can ASMLib and udev disks co-exist

Grid version:11.2.0.3
OS : RHEL 5.8
Currently we use ASMLib to stamp our LUNs. We want to start using udev for the device persistancy in our RAC Nodes.
Can disks labelled using ASMLib and disks named by udev co-exist in a single disk group ?

I don't see why you can't mix udev and ASMlib defined devices, just set your asm_diskstring accordingly. In this example, I'm mixing ASMlib and NFS devices and it works no problem:
SQL>
SQL> sho parameter asm_d
NAME                                 TYPE        VALUE
asm_diskgroups                       string      ACFSV1, ACFSV2
asm_diskstring                       string      ORCL:*, /u01/nfs_shares/asm/ir
                                                 on*
SQL> select path from v$asm_disk;
PATH
/dev/oracleasm/disks/LUN5
/dev/oracleasm/disks/LUN4
/dev/oracleasm/disks/LUN3
/dev/oracleasm/disks/LUN2
ORCL:LUN5
/dev/oracleasm/disks/LUN1
/u01/nfs_shares/asm/irond5
ORCL:LUN1
ORCL:LUN2
ORCL:LUN3
ORCL:LUN4
/u01/nfs_shares/asm/irond3
/u01/nfs_shares/asm/irond2
/u01/nfs_shares/asm/irond4
/u01/nfs_shares/asm/irond1
/u01/nfs_shares/asm/irond6
16 rows selected.
SQL>

Co-existence of HDLM and VxVM DMP 5.0

Can HDLM and VxVM DMP 5.0 can exist in same host ?

Hi,
You definitely want to install into a different folder so you
don't overwrite things like the jdeveloper.ini files.
If you have 2.0 installed in a directory like 'C:\JDeveloper',
installe 3.0 in 'C:\JDeveloper 3.0'. You should not have any
problems with a space in the directory name.
Laura
Raphael Roale (guest) wrote:
: John,
: I am now using both JDev 2 and 3, and I did not have any
: problems. Try to install in different folder.
: Raphael
: John Salvo (guest) wrote:
: : I already have JDeveloper 2.0 on my machine, and I recently
: : downloaded JDeveloper 3.0.
: : However, I would like to be able to keep both until such time
I
: : am satisfied with JDeveloper 3.0.
: : Can these two versions co-exist safely on a single machine???
: : Thanks,
: : John Salvo
null

DMM-DMS on 5.0 and 4310G DMP Compatibility

I just bought 2 new 4310G DMP's and when they come up, they show as up for a short period of time and then show down. I ensured that the passwords are the same on the DMP's and the DMM. Is there an compatibility issue with the firmware, by chance? I haven't been able to find anything, but that is my last guess.

Hi there,
Are you actually running 5.0 with a new DMP (which should ship with 5.4x) ?
I have not tried this myself but the app releases match the corresponding DMP firmware versions and each update calls for updating the firmware on the endpoints.
http://www.cisco.com/c/en/us/td/docs/video/digital_media_systems/5_x/5_4/dms/upgrade/guide/541upgrade.html
Any information provided as a member of public community support forums is provided as-is and is not warrantied by Cisco or endorsed by TAC.

11gR2 on Solaris and Veritas DMP

I am in the process of building a 2 node cluster to test some upgrades we have coming up. Our current clusters are using Veritas for the clustering software. For this new cluster ( 2 new machines ), we want to use 11gR2 clustering and ASM.
My question is this:
We want to take advantage of the Veritas multi-pathing ( DMP ). In 1 document I have read, it says that "ASM disks must be configured as logical volumes to utilize DMP multipathing. ASM must us the dmp device which resides over the vxvm logical volumes: /dev/vx/rdmp/cxtydzsx"
One of my problems is that all of the devices under /dev/vx/rdmp are owned by root. It is my understanding that in order for ASM to see them, they need to be owned by grid:asmadmin. Just on a whim, I chown'd all of those devices to grid, but that change isn't persistent across a reboot.
My other problem is that my second node doesn't see the diskgroups/volumes I created on the first node. The second node can see the same disks, just not the diskgroups/volumes. I have been told that in order to see the diskgroups and such on the second node, they will have to be deported from node 1 and imported on node 2. That makes sense. We can't import them shared because we don't have the clusterware installed yet.
All of these disk devices are raw and don't have any type of filesystem associated with them. I was able to form a cluster with 11gR2 before, but that was by pointing directly to the block device under /dev/rdsk/cxtydzsx, but that didn't provide any type of multipathing protection. The disks are luns being presented from an EMC CX480, and the same luns are presented to both nodes.
I'm not finding the provided documentation very clear as to how exactly I need to setup the disks and what I need to do to get DMP working.
Any advice would be appreciated

Ended up using EMC Powerpath. It was much easier and worked like a champ the first time. I didn't have to fiddle with creating diskgroups and logical volumes, just changed the permissions on the /dev/rdsk/emcpower* devices to grid:asmadmin, ran them through format to build partitions that start at cylinder 1, and the installer picked them up right away.

New Oracle Linux 6 installation - ASMLib and EMC Powerpath - is it possible

Hi everyone,
I would like to ask whether that latest version of Oracle Linux 6 can be used for a new installation (one that will replace Windows) to serve as that basis for Oracle RAC.
The storage is a high-end EMC Clariion.
I want to use the Unbreakable Enterprise Linux 2.
I would like to use EMC Powerpath, but it seems this is not yet available (or at list not present in the current EMC support matrix).
I want to use ASMLib, but if have to use redhat compatible kernel (so that I can use Powerpath), I will not be able to use ASMLib (AFAIK).
Does anybody has experience with this problem? What would you recommend?
I'm putting a list of possile options that I am aware of:
1. Use OEL5 with redhat compatible kernel (use Powerpath and ASMLib).
2. Use OEL6 with UEK2 kernel, but don't use Powerpath (use dm-multipath and ASMLib)
3. Use OEL6 with redhat compatible kernel (use Powerpath and don't use ASMLib, but use udev for persistent device permissions and naming)
4. Use SLES11 (with Powerpath and ASMLib)
do you have other suggestions? do you have comments on the pros and cons on this options.
Can someone from EMC or Oracle comment on the plans to make Powerpath available for OL6 with UEK2 ?
Regards,
Mihail

I could test "OEL6 with RHEL kernel + Powerpath" vs "OEL6 with UEK2 kernel + dm-mpio", but anyway this would not give the answer whether Powerpath is faster or slower than dm-mpio by itself, since the kernels would be different.I wonder how the answer whether EMC Powerpath or DM Multipath is faster can help you? Apparently you cannot use Powerpath with the UEK2 kernel and have a certified system at the same time, at least not at this time. However there is no reason to throw the towel yet. If the use of Powerpath instead of Multipath is so critical, why not using Oracle Linux 5.7, which is certified? If you check the EMC compatibility matrix (esm_by_os), it actually shows some systems including Clariion supported for Oracle Linux 6.2 with UEK kernel. You might want to take a closer look.
Anyway, it doesn't look like you will be able to solve the performance question without doing a real world test in your environment. You have no indication that Oracle Linux 6.3 with DM Mutlipath will give you less performance than RHEL 6.3 with Powerpath. Regarding the information you found, Linux is not Windows.
Powerpath is not free and you have to pay a license, but worse, it will tie your system to a very specific version of the kernel. In case of RHEL 6 or later, it will deny you the use of Oracle specific products and features such as ASMLib, etc. Multipath seems to be the more economic and better solution since you do not have to worry about kernel versions and have the freedom to use whatever Oracle Linux has to offer.
So, do you want to limit your kernel features and options and fix a problem that you don't know even know if it applies and pay money for it?
Edited by: Dude on Aug 21, 2012 5:57 PM

ZFS and Veritas DMP

Does anyone know whether ZFS is supported on DMP devices on Storage Foundation 5.1
It is not supported on Storage Foundation 5.0 MP3 but I was wondering if it had been introduced
for 5.1
http://seer.entsupport.symantec.com/docs/324001.htm
The 5.1 documentation is not clear as to whether it is supported or not.

Ended up using EMC Powerpath. It was much easier and worked like a champ the first time. I didn't have to fiddle with creating diskgroups and logical volumes, just changed the permissions on the /dev/rdsk/emcpower* devices to grid:asmadmin, ran them through format to build partitions that start at cylinder 1, and the installer picked them up right away.

Asmlib and oracleasm permission question for 11gr2 RAC install

Dear All,
I am trying to install 11G RAC on 2 oracle linux 6 machines (it is 2 virtual machines but I hope the principle applied).
I use asmlib package to create sharable disk.
I encounter a lot of user/group permission issue, so I decide to use oracle:oinstall to install my grid software.
Here are my questions:
1. when run oracleasm configuration -iDefault user to own the driver interface []: oracle
Default group to own the driver interface []: dba <<<<<<<<<< what group should I use? I see people use oinstall, dba...
2. after mounting /dev/oracleasm directory by using /usr/sbin/oracleasm init, what directory permission should I set?
it is root:root after mount.
I tried to run installer for grid, if I don't change /dev/oracleasm to 766, the ASM disks don't even show up.
Any suggestions?

969880 wrote:
1. when run oracleasm configuration -iDefault user to own the driver interface []: oracle
Default group to own the driver interface []: dba <<<<<<<<<< what group should I use? I see people use oinstall, dba...
2. after mounting /dev/oracleasm directory by using /usr/sbin/oracleasm init, what directory permission should I set?
it is root:root after mount.
I tried to run installer for grid, if I don't change /dev/oracleasm to 766, the ASM disks don't even show up. Hi,
If you are using single user for grid and database I would set oinstall as the group owner.
You don't need to set permission on /dev/oracleasm.. asmlib will take care of it
Have a read http://docs.oracle.com/cd/E11882_01/install.112/e22489/storage.htm#CDECEBGH for more information.
Hope it helps
Cheers

ASMlib disk discovery revisited - ASMlib and createdisk disks disappear

Hello,
Is it possible to make asmlib see my partitions /dev/VolGroup00/ora000, ora001 and ora002 when scanning my single 120 gig ide drive? All documentation only shows presenting a whoe disk to asm but for poor guys with a test box trying to emulate all I can do is partition out my one drive. All kernel versions are correct and I think the issue lies in the fact that ASMlib is looking at the whole drive and not my partitions. Help..S.O.S. .
Matt

Metalink Note:266028.1 ASM Using Files Instead of Real Devices on Linux
This document is for Users intending to test the ASM (Automatic Storage Manager). It explains how to set up ASM, if there are no free partitions on own disk or no free disk device is available. This set-up should be used for testing or educational purposes only.

Why I can't drop ASM disks and stop ASMLib ?

Hi, I wanted to delete disks but this operation failed:
1.
/etc/init.d/oracleasm deletedisk DATA1
Removing ASM disk "DATA1" [FAILED]
I know there is solution to overwrite ASM header information on a disk
dd if=/dev/zero of=<your_raw_device> bs=1024 count=100
and then droping is successful
but I also saw resources that said it should be count=50
Could anyone confirm count=100 or 50 ?
2.
Besides of that I tried to stop ASMLib and it failed too:
/etc/init.d/oracleasm stop
Dropping Oracle ASMLib disks: [ OK ]
Shutting down the Oracle ASMLib driver: [FAILED]
Ok, so using dd will help me to get rid of disks, but I worry about ASMLib in general, why I can't stop it? All ASM instances were removed before. There is no ASM software installed, besides ASMLib.

The story is like that:
During Grid Infrastructure 11.2 installation I wanted to create new disk group but all available disks ware marked as 'MEMBER', so that I couldn't use any of them. Then I investigated that there is no database using ASM, and no ASM software installed. But ASMLib lists some disks. So former diskgroups must have been dropped in a bad way. As disks are marked as 'MEMBER' I wanted to drop them and create new ones. But this operation failed.
Yes, I use root account
oracleasm exit failed too:
oracleasm exit
Unmounting ASMlib driver filesystem: failed
Unable to unmount ASMlib driver filesystem
/var/log/oracleasm :
Cleaning any stale ASM disks...
Unmounting ASMlib driver filesystem: umount: /dev/oracleasm: device is busy
umount: /dev/oracleasm: device is busy
failed
Unable to unmount ASMlib driver filesystem
How to deal with this problem? Please help.
Edited by: Przemek P on 2012-02-07 07:00

How can I create a folder on internal storage of DMP 4310?

Hi. I'm a junior engineer in Korea.
I have a question about DMP 4310 with creating a folder of internal storage.
I can acess the internal storage but, I cannot make a folder or file uploading.
I already checked about Access mode - read and write, and also DMP management - FTP Server On, and password too.
It's enable to read but, unable to make a file or a folder.
when It rejected my order, I saw a message on my screen like this.
"550 Create directory operation failed."
I searched this letters, but couldn't get any information to handle this issue except for showing of permision error message of linux.
now, I am begging for your kindness.
what am I suppose to do?

I checked my permission, and I got the result.
By the result, I cannot make any folders or files except for path of /usb_1/
So, I can upload file to /usb_1/ and play it. that's it.
self question, and self answer... so sad to less people to answer this DMS section...

Windows 8.1 Keeps crashing! Blue screens and I don't know why.

My computer is crashing randomly. Happens once every few days or so. It started happening when I installed a new fan and heatsink. My cpu never goes over 50 C now so I don't know why it is crashing. Here is the dump file. Please help me :/
Microsoft (R) Windows Debugger Version 6.3.9600.17298 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Windows\MEMORY.DMP]
Kernel Bitmap Dump File: Only kernel address space is available
************* Symbol Path validation summary **************
Response                         Time (ms)     Location
Deferred                                       SRV*C:\Windows\symbol_cache*http://msdl.microsoft.com/download/symbols
Symbol search path is: SRV*C:\Windows\symbol_cache*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 8 Kernel Version 9600 MP (6 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 9600.17328.amd64fre.winblue_r3.140827-1500
Machine Name:
Kernel base = 0xfffff803`7a47e000 PsLoadedModuleList = 0xfffff803`7a754370
Debug session time: Tue Nov 25 22:05:18.738 2014 (UTC - 5:00)
System Uptime: 2 days 9:06:56.454
Loading Kernel Symbols
Loading User Symbols
PEB is paged out (Peb.Ldr = 00000000`7ffdf018). Type ".hh dbgerr001" for details
Loading unloaded module list
*                        Bugcheck Analysis
Use !analyze -v to get detailed debugging information.
BugCheck 3B, {c0000005, fffff8037a52cba4, ffffd000220ab340, 0}
Probably caused by : win32k.sys ( win32k!SEMOBJ::vUnlock+2c )
Followup: MachineOwner
4: kd> !analyze -v
*                        Bugcheck Analysis
SYSTEM_SERVICE_EXCEPTION (3b)
An exception happened while executing a system service routine.
Arguments:
Arg1: 00000000c0000005, Exception code that caused the bugcheck
Arg2: fffff8037a52cba4, Address of the instruction which caused the bugcheck
Arg3: ffffd000220ab340, Address of the context record for the exception that caused the bugcheck
Arg4: 0000000000000000, zero.
Debugging Details:
EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.
FAULTING_IP:
nt!KxWaitForLockOwnerShipWithIrql+14
fffff803`7a52cba4 48890a          mov     qword ptr [rdx],rcx
CONTEXT: ffffd000220ab340 -- (.cxr 0xffffd000220ab340;r)
rax=0000000000000000 rbx=0000000000000000 rcx=ffffd000220abdf0
rdx=8848800000000000 rsi=0000000000000000 rdi=ffffd000220abdf0
rip=fffff8037a52cba4 rsp=ffffd000220abd70 rbp=ffffd000220abea0
r8=ffffd000220abef0 r9=ffffe000da69ddb0 r10=ffffd000220abf80
r11=fffff90145b03ce0 r12=fffff90140ad53f8 r13=fffff90140a00830
r14=0000000000000000 r15=ffffe000d889d880
iopl=0         nv up di pl zr na po nc
cs=0010 ss=0018 ds=002b es=002b fs=0053 gs=002b             efl=00010046
nt!KxWaitForLockOwnerShipWithIrql+0x14:
fffff803`7a52cba4 48890a          mov     qword ptr [rdx],rcx ds:002b:88488000`00000000=????????????????
Last set context:
rax=0000000000000000 rbx=0000000000000000 rcx=ffffd000220abdf0
rdx=8848800000000000 rsi=0000000000000000 rdi=ffffd000220abdf0
rip=fffff8037a52cba4 rsp=ffffd000220abd70 rbp=ffffd000220abea0
r8=ffffd000220abef0 r9=ffffe000da69ddb0 r10=ffffd000220abf80
r11=fffff90145b03ce0 r12=fffff90140ad53f8 r13=fffff90140a00830
r14=0000000000000000 r15=ffffe000d889d880
iopl=0         nv up di pl zr na po nc
cs=0010 ss=0018 ds=002b es=002b fs=0053 gs=002b             efl=00010046
nt!KxWaitForLockOwnerShipWithIrql+0x14:
fffff803`7a52cba4 48890a          mov     qword ptr [rdx],rcx ds:002b:88488000`00000000=????????????????
Resetting default scope
DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT
BUGCHECK_STR: 0x3B
PROCESS_NAME: AI Suite II.ex
CURRENT_IRQL: 0
ANALYSIS_VERSION: 6.3.9600.17298 (debuggers(dbg).141024-1500) amd64fre
LAST_CONTROL_TRANSFER: from fffff8037a4d9f8c to fffff8037a52cba4
STACK_TEXT:
ffffd000`220abd70 fffff803`7a4d9f8c : ffffe000`da69ddb0 00000000`0000001e 00000000`00000000 ffffe000`db793c30 : nt!KxWaitForLockOwnerShipWithIrql+0x14
ffffd000`220abda0 fffff803`7a4d93c2 : 00000000`00000000 fffff960`002172ec ffffd000`220ac002 fffff901`44ffe620 : nt!ExpReleaseResourceForThreadLite+0x64c
ffffd000`220abee0 fffff960`001da2cc : 00000000`00000000 fffff960`001a7ef2 0000207f`e204207f 00000000`00000001 : nt!ExReleaseResourceAndLeaveCriticalRegion+0x12
ffffd000`220abf10 fffff960`001d51a3 : fffff901`451e4ac0 ffffd000`220abfa0 00000000`00000000 fffff901`40ad53f8 : win32k!SEMOBJ::vUnlock+0x2c
ffffd000`220abf50 fffff960`001e49ad : 00000000`0000163c fffff901`44ffe620 00000000`00000000 ffffe000`da69ddb0 : win32k!GreSelectVisRgnInternal+0x173
ffffd000`220abfd0 fffff960`001ac21b : ffffffff`e204207f fffff901`00000d3a 00000000`00000001 ffffe000`da69ddb0 : win32k!ResetOrg+0x50d
ffffd000`220ac100 fffff960`001e5a5d : ffffffff`e204207f fffff901`452e23e0 ffffd000`220acb00 ffff6b78`f79a9a37 : win32k!UserSetDCVisRgn+0x17b
ffffd000`220ac140 fffff960`001ed3a4 : fffff901`40a58990 00000000`00000000 fffff901`40a58990 00000000`02000705 : win32k!zzzLockDisplayAreaAndInvalidateDCCache+0x14d
ffffd000`220ac1a0 fffff960`003149cf : ffffe000`db7b2ba0 fffff901`428f7a80 00000000`00000000 fffff901`40b00ff0 : win32k!xxxCreateWindowEx+0x1824
ffffd000`220ac4b0 fffff960`001ed82a : fffff901`428f7d28 00000000`00000000 00000000`00000000 ffffe000`db7b2ba0 : win32k!xxxCreateDefaultImeWindow+0x19b
ffffd000`220ac5b0 fffff960`001d6ab5 : 00000000`00000000 00000000`00000000 e000d889`78747355 fffff803`7a4d7bc8 : win32k!xxxCreateWindowEx+0x1caa
ffffd000`220ac8c0 fffff803`7a5d89b3 : 00000000`00000000 ffffd000`220ac940 ffffd000`220ac958 ffffd000`220ac968 : win32k!NtUserCreateWindowEx+0x4d2
ffffd000`220aca10 00000000`777f611a : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiSystemServiceCopyEnd+0x13
00000000`0abbe758 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : 0x777f611a
FOLLOWUP_IP:
win32k!SEMOBJ::vUnlock+2c
fffff960`001da2cc ff158e023100    call    qword ptr [win32k!_imp_PsLeavePriorityRegion (fffff960`004ea560)]
SYMBOL_STACK_INDEX: 3
SYMBOL_NAME: win32k!SEMOBJ::vUnlock+2c
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: win32k
IMAGE_NAME: win32k.sys
DEBUG_FLR_IMAGE_TIMESTAMP: 54335e2a
IMAGE_VERSION: 6.3.9600.17393
STACK_COMMAND: .cxr 0xffffd000220ab340 ; kb
BUCKET_ID_FUNC_OFFSET: 2c
FAILURE_BUCKET_ID: 0x3B_win32k!SEMOBJ::vUnlock
BUCKET_ID: 0x3B_win32k!SEMOBJ::vUnlock
ANALYSIS_SOURCE: KM
FAILURE_ID_HASH_STRING: km:0x3b_win32k!semobj::vunlock
FAILURE_ID_HASH: {ec837e9a-fa14-dd77-d99c-f14b9fe89bf2}
Followup: MachineOwner

Hi,
In order to assist you, we will need the .DMP files to analyze what exactly occurred at the time of the crash, etc.
If you don't know where .DMP files are located, here's how to get to them:
1. Navigate to the %systemroot%\Minidump folder.
-- %systemroot% is the environment variable for your Windows directory. For example, C:\Windows.
2. Copy any and all .DMP files in the Minidump folder to your Desktop, create a new folder on the Desktop to put these .DMP files in, and then zip the folder. You can then either use a 3rd party tool such as 7-Zip/Winrar, or you can use Windows'
default method of zipping folders.
Compress and uncompress files (zip files).
Please note that any "cleaner" programs such as TuneUpUtilities, CCleaner, etc, by default will delete .DMP files upon use. With this said, if you've run such software, and your Minidump folder is empty, you will need
to allow the system to crash once again to generate a crash dump.
3. Upload the .ZIP containing the .DMP files to Onedrive or a hosting site of your choice and paste in your reply.
Preferred sites: Onedrive, Mediafire, Dropbox, etc. Nothing with wait-timers, download managers, etc.
4 (optional): The type of .DMP files located in the Minidump folder are known as Small Memory Dumps. In %systemroot% there will be what is known as a Kernel Memory Dump (if your system is set to generate). It is labeled MEMORY.DMP. The difference
between Small Memory Dumps and Kernel Memory Dumps in the simplest definition is a Kernel Memory Dump contains
much more information at the time of the crash, therefore allowing further debugging of your issue. If your upload speed permits it, and you aren't going against any strict bandwidth and/or usage caps, etc, the Kernel Memory Dump is
the best choice. Do note that Kernel Memory Dumps are much larger
in size due to containing much more info, which is why I mentioned upload speed, etc.
If you are going to use Onedrive but don't know how to upload to it, please visit the following:
Upload photos and files to Onedrive.
After doing that, to learn how to share the link to the file if you are unaware, please visit the following link -
Share files and folders and change permissions and view 'Get a link'.
If your computer is not generating .DMP files, please do the following:
1. Start > type %systemroot% which should show the Windows folder, click on it. Once inside that folder, ensure there is a Minidump folder created. If not, CTRL-SHIFT-N to make a New Folder and name it Minidump.
2. Windows key + Pause key. This should bring up System. Click Advanced System Settings on the left > Advanced > Performance > Settings > Advanced > Ensure there's a check-mark for 'Automatically manage paging file size for
all drives'.
3. Windows key + Pause key. This should bring up System. Click Advanced System Settings on the left > Advanced > Startup and Recovery > Settings > System Failure > ensure there is a check mark next to 'Write an event to the
system log'.
Ensure Small Memory Dump is selected and ensure the path is %systemroot%\Minidump.
4. Double check that the WERS is ENABLED:
Start > Search > type services.msc > Under the name tab, find Windows Error Reporting Service > If the status of the service is not Started then right click it and select Start. Also ensure that under Startup Type it is set to Automatic rather than
Manual. You can do this by right clicking it, selecting properties, and under General selecting startup type to 'Automatic', and then click Apply.
If you cannot get into normal mode to do any of this, please do this via Safe Mode.
Regards,
Patrick
“Be kind whenever possible. It is always possible.” - Dalai Lama

Auto Restart and Error Screen In Windows 8.1

Hello
I am running Windows 8.1 64 BIT on HP EliteBook 800 G1 SFF
Processor Core I5, 4 G Ram DDR3
Whenever i install windows 8.1 i got Error Message says : There a Problem and your PC will restart.
So I went to Event Viewer and i got those messages :
Log Name:      System
Source:        Microsoft-Windows-WER-SystemErrorReporting
Date:          10/26/2014 11:37:48 AM
Event ID:      1001
Task Category: None
Level:         Error
Keywords:      Classic
User:          N/A
Computer:
Description:
The computer has rebooted from a bugcheck. The bugcheck was: 0x0000001a (0x0000000000005003, 0xfffff58010804000, 0x000000000000a115, 0x000000007166c209). A dump was saved in: C:\Windows\MEMORY.DMP. Report Id: 102614-10140-01.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Microsoft-Windows-WER-SystemErrorReporting" Guid="{ABCE23E7-DE45-4366-8631-84FA6C525952}" EventSourceName="BugCheck" />
    <EventID Qualifiers="16384">1001</EventID>
    <Version>0</Version>
    <Level>2</Level>
    <Task>0</Task>
    <Opcode>0</Opcode>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2014-10-26T18:37:48.000000000Z" />
    <EventRecordID>550</EventRecordID>
    <Correlation />
    <Execution ProcessID="0" ThreadID="0" />
    <Channel>System</Channel>
    <Computer>------</Computer>
    <Security />
</System>
<EventData>
    <Data Name="param1">0x0000001a (0x0000000000005003, 0xfffff58010804000, 0x000000000000a115, 0x000000007166c209)</Data>
    <Data Name="param2">C:\Windows\MEMORY.DMP</Data>
    <Data Name="param3">102614-10140-01</Data>
</EventData>
</Event>
And the DMP File here
https://www.mediafire.com/?x6i37s2hh6zu38y
Please Advice
Mohamed Mahmoud IT Specialist

These crashes were related to memory corruption (probably caused by a driver).
Please run these tests to verify your memory and find which driver is causing the problem.
If you are overclocking (pushing the components beyond their design) you should revert to default at least until the crashing is solved. If you don't
know what it is you probably are not overclocking.
Since it is more likely to be a driver please run verifier first.
1-Driver verifier (for complete directions see our wiki here)
If verifier does not find the issue we can move on to this.
2-Memtest. (You can read more about running memtest here)
If you cannot boot after enabling verifier reboot into safe mode
In Vista & win 7 (F8)
In win 8 http://www.howtogeek.com/107511/how-to-boot-into-safe-mode-on-windows-8-the-easy-way/
Co-Authored by JMH3143
Wanikiya and Dyami--Team Zigzag

Cisco 340 (Edge) DMP can support ELO 3209L Touch Screen

Hi Cisco Expert,
Could you help to check ELO 3209L Touch Screen, i'd like to use this screen in our Digital Signs Systems (AppSpace 5. and 340 DMP), but i'm not sure about 340 DMP which can support 3209L or not, some screen model from cisco website.
ELO Interactive Digital Signage Display
including 4201L, 5501L, and 7001L.
ELO Desktop Touchmonitor including 1715L,
1515L, 1519L, 1919L, 2201L, 1940L, 2243L,
2244L, and 3201L.
ET4201L-CUWA-0-MT-GY-G, SY-4210H
Anytouch WTM320T
Dell ST2220Tc
NEC V463-TM,V423-TM
Thanks&Rgds.

Export and import a table data

Hi All,
There is table abc which is having appprox 40lak records without partitions(and have dmp of this data). Due to space constraints I want to compress the data and put it in archive schema.
My question is:
1) Can we import the data into other schema(say: archive schema) in compressed mode. If so could you please let me know the syntax for that.
2) Can we import the data into some temporary table(say: temp) in same schema?
3) And if any blob column exists in table then can we import the data without this blob column data.(Supposing the export dump has the blob data).
Is it possible, or whould we export without this blob column and import this to other table?
Please help me out.
Edited by: user11942774 on 4 Dec, 2011 10:33 PM

Thanks Mahir,
Could you please let me know the syntax or with any examples if possible.
is it possible to drop any column say blob column after the table is in compressed mode?
Edited by: user11942774 on 4 Dec, 2011 10:53 PM
Edited by: user11942774 on 4 Dec, 2011 10:54 PM

Asmlib and VX DMP

Similar Messages

Maybe you are looking for