Aspects Developer "Verifier jar file not found error"

Hello all.
I'm working in a Java Card project and I have some troubles.
When I tried to compile, verify and load my solution in Aspects Developer's Software, I achieved the following error message: " could not found Verifier jar file".
So I couldn't test my applet nor simulate it.
Then I compiled myself (with Java Card's commands) and execute the verifier file provided with Java Card, and all was good, so i decided to test my java card applet on the simulator or the real card, both with Aspects Developer SW.
Then the error I got was "Read past end of stream".
What am I doing in the wrong way?What can I do test my applet in a Simulator?
Thank very much for your help.
Regards.
Mike L.

Hi,
This error message indicates that an incompatible version of the Java JDK is being used with Developer.
The release notes distributed with Developer are a little misleading. Currently Developer supports Java JDK versions greater than 1.2.2 but not 1.4.x. For example, I have JDK 1.3.1_06 installed on my machine.
Developer currently supports JavaCard development kit 2.1.2 and this specification restricts the versions of JDK that can be used. For more detail look at JCDevKit_User_Guide.pdf which can be found under <JAVA_CARD_INSTALL_DIR>\java_card_kit-2_1_2\doc\en\guides
Cheers,
Alasdair

Similar Messages

Error:verifier jar file not found

Hi,
I found problem "verifier jar file not found" while building a package in Aspects Developer Evaluation version.
Pls guide me regarding my problem if any body could.

Include the offcardverifier.jar file in your classpath, you will find this file under $java_card_kit-2_2_2\lib
Regards,
Amr.

File Not Found Error on Fresh MX7 Installation

After spending days getting CFMX 7.0.2 installed on a CentOS5.3 (production) server running Apache 2.2.3 and WHM/cPanel 11, by religiously following Bill Mitchell's lifesaving guide, CF is up and running but I cannot access the administrator or anything else in user public_html directories.
If I place a simple foo bar test file in the /usr/local/apache/htdocs/testfile.cfm directory, I can call it at http://[IPaddress]/testfile.cfm and it parses properly.
However, if I place the same file at /home/cfusion/public_html/testfile.cfm and call it at http://[IPaddress]/~cfusion/testfile.cfm, I get a CF-generated 404 "File Not Found" error.
cfusion is a cPanel account I created via WHM prior to installing ColdFusion as a repository for my CFIDE directory.
If I place a symlink for /usr/local/apache/htdocs/CFIDE -> /home/cfusion/public_html/CFIDE:"File Not Found". If I cp -R my CFIDE into htdocs: "File Not Found." These files are physically there. I can easily verify that of course. But CF is still saying File Not Found. In fact, if I disconnect Apache - JRun, Apache finds the files all by itself no problem. They are definitely there.
I thought this might be a permissions issue, but all my .cfm files are nobody:root 775.
Here's what I'm seeing in the exception.log:
coldfusion.runtime.TemplateNotFoundException: File not found: /~cfusion/filetest.cfm
    at coldfusion.filter.PathFilter.invoke(PathFilter.java:83)
    at coldfusion.filter.ExceptionFilter.invoke(ExceptionFilter.java:69)
    at coldfusion.filter.ClientScopePersistenceFilter.invoke(ClientScopePersistenceFilter.java:2 8)
    at coldfusion.filter.BrowserFilter.invoke(BrowserFilter.java:38)
    at coldfusion.filter.GlobalsFilter.invoke(GlobalsFilter.java:38)
    at coldfusion.filter.DatasourceFilter.invoke(DatasourceFilter.java:22)
    at coldfusion.filter.RequestThrottleFilter.invoke(RequestThrottleFilter.java:115)
    at coldfusion.CfmServlet.service(CfmServlet.java:107)
    at coldfusion.bootstrap.BootstrapServlet.service(BootstrapServlet.java:78)
    at jrun.servlet.ServletInvoker.invoke(ServletInvoker.java:91)
    at jrun.servlet.JRunInvokerChain.invokeNext(JRunInvokerChain.java:42)
    at jrun.servlet.JRunRequestDispatcher.invoke(JRunRequestDispatcher.java:257)
    at jrun.servlet.ServletEngineService.dispatch(ServletEngineService.java:541)
    at jrun.servlet.jrpp.JRunProxyService.invokeRunnable(JRunProxyService.java:204)
    at jrunx.scheduler.ThreadPool$DownstreamMetrics.invokeRunnable(ThreadPool.java:318)
    at jrunx.scheduler.ThreadPool$ThreadThrottle.invokeRunnable(ThreadPool.java:426)
    at jrunx.scheduler.ThreadPool$UpstreamMetrics.invokeRunnable(ThreadPool.java:264)
    at jrunx.scheduler.WorkerThread.run(WorkerThread.java:66)
I guess maybe I need to know where the config for webroots is set from the CF/JRun perspective? I'm a decent hand with web server admin stuff, but despite being a CF dev for 10 years, CF admin stuff is still a bit over my head. Any help would be GREATLY appreciated. I'm at my wit's end!

Thanks Mack. I set verbose to true in my httpd.conf, restarted Apache, restarted CF, but I can't see any difference in the logging. Errors seem the same, and no additional info.
The Apache error_log file is filled with cryptic stuff that looks like it's referencing JRun. Does any of this mean anything to you? Is there another log file I should be looking at?
[Thu Aug 06 00:06:52 2009] [notice] jrApache[8608: 15070] filtering / (/usr/local/apache/htdocs/) HOST=null
[Thu Aug 06 00:06:52 2009] [notice] jrApache[8608: 15070] filterRequest:   no match
[Thu Aug 06 00:06:52 2009] [notice] jrApache[8608: 15070] jrun_trans: sub-request so DECLINED
[Thu Aug 06 00:06:52 2009] [notice] jrApache[8608: 15070] jrun_trans: sub-request so DECLINED
[Thu Aug 06 00:06:52 2009] [notice] jrApache[8608: 15070] jrun_trans: sub-request so DECLINED
[Thu Aug 06 00:06:52 2009] [notice] jrApache[8608: 15070] jrun_service: r is 0x9d1aa98, server is 0x99df290, virtual 1
[Thu Aug 06 00:06:52 2009] [notice] jrApache[8608: 15070] jrun_service: no handler, return DECLINED
[Thu Aug 06 01:10:01 2009] [notice] jrApache[8548: 18910] jrun_trans: r is 0x9d169d8, server is 0x99df290, virtual 1
[Thu Aug 06 01:10:01 2009] [notice] jrApache[8548: 18910]     HOST: <null>
[Thu Aug 06 01:10:01 2009] [notice] jrApache[8548: 18910] filtering /whm-server-status (/usr/local/apache/htdocs/whm-server-status) HOST=null
[Thu Aug 06 01:10:01 2009] [notice] jrApache[8548: 18910] filterRequest:   no match
[Thu Aug 06 00:11:53 2009] [notice] jrApache[8518: 55474] jrun_trans: r is 0x9e5b930, server is 0x99df290, virtual 1
[Thu Aug 06 00:11:53 2009] [notice] jrApache[8518: 55474]     HOST: <null>
[Thu Aug 06 00:11:53 2009] [notice] jrApache[8518: 55474] filtering / (/usr/local/apache/htdocs/) HOST=null
[Thu Aug 06 00:11:53 2009] [notice] jrApache[8518: 55474] filterRequest:   no match
[Thu Aug 06 00:11:53 2009] [notice] jrApache[8518: 55474] jrun_trans: sub-request so DECLINED
[Thu Aug 06 00:11:53 2009] [notice] jrApache[8518: 55474] jrun_trans: sub-request so DECLINED
[Thu Aug 06 00:11:53 2009] [notice] jrApache[8518: 55474] jrun_trans: sub-request so DECLINED
[Thu Aug 06 00:11:53 2009] [notice] jrApache[8518: 55474] jrun_service: r is 0x9e5b930, server is 0x99df290, virtual 1
[Thu Aug 06 00:11:53 2009] [notice] jrApache[8518: 55474] jrun_service: no handler, return DECLINED
[Thu Aug 06 00:15:01 2009] [notice] jrApache[8519: 59314] jrun_trans: r is 0x9f96cc8, server is 0x99df290, virtual 1
[Thu Aug 06 00:15:01 2009] [notice] jrApache[8519: 59314]     HOST: <null>
[Thu Aug 06 00:15:01 2009] [notice] jrApache[8519: 59314] filtering /whm-server-status (/usr/local/apache/htdocs/whm-server-status) HOST=null
[Thu Aug 06 00:15:01 2009] [notice] jrApache[8519: 59314] filterRequest:   no match

AudioUnit/AudioUnit.h file not found error in ipad App?

Hi Iam using AudioToolbox Frame work in ipad App and i have added all required frameworks. App is running successfully in Ipad Simulator. But in device, AudioUnit/AudioUnit.h file not found error has occurred. i didn't found any solution in net.
Please any one tell the solution of this problem.
Thanks.

You would do better to ask this in the developer forum, not the user forum.

404 File not found error in jdeveloper

Hi all,
I developed a jsp page in jdeveloper and I added all the required files. The page was compiled successfully. But when i ran the page it shows 404 File Not Found Error. web.xml is not added to my project. Can anyone help me
Regards,
Kannan

web.xml is not added to my project
web.xml gets created when a JSP page is created. Has the web.xml been deleted or was the JSP created not in JDeveloper? Is the JSP in the public_html directory?

File not found error on some computers running the same program

Dim pList As System.Diagnostics.Process
retval = 0
PTRName = "F:\myprogram.exe"
If My.Computer.FileSystem.FileExists(PTRName) Then
System.Disgnostics.Process.Start(PTRName)
pList = System.Diagnostics.Process.GetProcesses
For each proc As System.Diagnostice.Process in pList
If proc.ProcessName = "myprogram" Then
retval = proc.Id
Exit For
End If
Next
If retval > 0 then
'continue
Else
'error message
End If
End If
PTRName = "F:\myprogram.exe"
If My.Computer.FileSystem.FileExists(PTRName) Then
Retval = Shell(PTRName,4)
If Retval > 0 Then
'Continue
Else
'Error message
End If
End IF
I have created a program which:
opens a file
reads the records and massages the records
writes the records to a new file
Launches a program that uses the resultant file.
The program was written on Windows xp MCE using Visual Studio 10. The resulting program works fine.
I places The executable and the input file onto a flashdrive, and then tested it on other machines.
Two of the machines are both Win 7 Pro 64bit with .Net 4. On one machine it works great. On the other I get a "File not found" error when starting the second process. This is the failing code:
The problem is with the Shell command. When I rewrite it as:
it works on both machines
So my question is: Why does exactly the same code (The same flashdrive was used on both machines) work on one machine and not the other (when both machenes appear to be at the same level)?
In both cases I verify the file exists in the correct place before I try to start it.
Any help would be appreciated.
Thanks in advance
   John

The use of F is just an example. I use:
OutputPath = My.Application.Info.DirectoryPath 'Where app is run from (root)
    'Make sure the path ends in \
    If VB.Right(OutputPath, 1) <> "\" Then
      OutputPath = OutputPath & "\"
    End If
to get the correct information.
Then
PTRName = OutputPath & "myprogram.exe"
BTW "myprogram.exe" is not the correct name it is just an example.
Sorry if this caused confusion
However all of this is not the point. If:
My.Computer.FileSystem.FileExists(PTRName)
is true then the file is in the right place. Therefore:
Retval = Shell(PTRName,4)
must also work. However it does not on some machines.
Is the problem in .Net, VB or VS because it is not in my code.
I have also used a routine similar to you (in VB6) to find a particular volume, but used the volume label. That worked better in my case.
John

404 File Not Found Errors - SP 2013

Recently, user profile pictures have stopped displaying and when clicking on them, it brings us to a 404 file not found error. When I try to edit my personal mysite, I can get to the home page of it but when I click edit profile or anything else, it brings
me again to the 404 file not found error.
I have a MySites web appication with a site collection created at the root of it right now.
Any help would be appreciated.

The user profile sync service is also stuck on "starting"...
When I try to start FIMSS and FIMS on windows services I get this error.
The error from the event viewer states this, "The Forefront Identity Manager Synchronization Service terminated with service-specific error %%-2146234334.
The user profiles kind of started malfunctioning when I believe I switched some managed accounts under security >configure service accounts
Your problem is the managed accounts.
SharePoint is not very strong in managing managed accounts. Have a look at your application pools and verify they are all running. If they are not running, verify that the identities are correct. (User name /Password)
Do the same thing with the FIM services in Windows Services and verify that the identities are correct.
In shorty, you need to verify the passwords of all your service accounts(those that are managed) and verify that all services are running.

File not found error from scheduler

Hi,
We have a scheduler file with .cfa extension in the cf scheduler which trigger some mails to certain recipients on execution.
At the bottom option fo the scheduled task, we have checked the option to 'save output to file' and has given the file
path. On direct execution of the given url, the file is executed successfully and mails are fired.
But while trying to execute the same via scheduler it is not firing the mails. On investigation of the output file,
found the error message 'File not found'.
Is it possible that the file get executed when directly browsing the url and shows 'file not found' error
while executing via cf scheduler?(CF 8 is used.)

To be more specific,
the url format given in the cf admin scheduler is like this:
"http://www.domainname.com/myfolder/myfile.cfa"
A file path to log the output is also given to publish.
If we copy the above url to a browser and execute, the file gets executed and mails are fired.
If we set the interval or run the scheduler from the administrator,mails are not sent.On examination of log file given in the scheduler section, it is
showing error '/myfolder/myfile.cfa' file not found.

File not Found error when synching Ipod

I have a fairly new Ipod and synced successfully for months, but now iTunes says it cant synch because of a "File not Found error" (no error number or other clues). I'm running the latest iTines and Ipod software, and I've reset USB drivers but still no luck. I cant reset the iPod itself becase I then got a "1418 error", which is why I then reset USB. I'm stuck, has anyone seen this before?
The Ipod itself plays fine and Itunes recgnises it OK, albeit very slowly, even thought I'm using USB 2.
One other piece of info; when this first happened, the sync must have first deleted the songs I no longer wanted, prior to unsuccesfully adding new ones. Those old songs show up on the iPod but are skipped when I try to play them.

Its on the same thread as this one ("connecting iPod nano (second Generation ) to Windows"). Scroll through the authors, you will find it.

File not found, Error= –43

Everytime i try to make a new project logic pro does not accept audiophiles i use from other project-folders (File not found, Error= -43).
Even with the newest logic-version (10.0.7) and also a new mac book pro (moving via migration assistant) it does not work.

Hi,
I have a 'file not found' problem with Logic Express. A while back I transferred all my Logic files to DVD to make room on the hard drive. It took 4 discs, saved alphabetically by song title. Now, I nearly always get the 'file-not'found' error message when I try to work on something. Sometimes when I click 'search' it finds the file, sometimes it doesn't. I'm confident that I didn't delete the files.
Wondering if 'search' would find the files if I transferred all the files from DVD to a single folder on an external drive. I don't use the 'search manually' option, because I'm not really sure what I'm looking for, or where to look. In the other room, perhaps? 'Computer challenged' is me. Any suggestions?
DS

File not found error when tried to open Document ID settings page

Hi
when i open sitesettings>site collection administratin >Document
ID settings
it shows
file not found error
adil

Hi,
first we need to figure out the error. change the web.config so that you can see the error on browser
1) Obtain the complete call stack instead of the default error page:
<SafeMode MaxControls="200" CallStack="false"/>
to
<SChangeafeMode MaxControls="200" CallStack="true"/>
2) CustomeErrors mode value (in the system.web section) is set to Off:
<customErrors mode="On">
to
<customErrors mode="Off">
Change these value in "c:\inetpub\wssroot" CA dirctory web.config and
C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\TEMPLATE\LAYOUTS\web.config .
now again try to do the action. you will get the error on screen.
Whenever you see a reply and if you think is helpful,Vote As Helpful! And whenever you see a reply being an answer to the question of the thread, click Mark As Answer

File not found error (404) from web browser

I installed 901 DB on different Oracle home and iAS 1.0.2.2 in a
different Oracle home. The ifsconfig went thru fine.
However I am unable to access the login page ( I executed
ifsapachesetup ). I tried to access
http://<machine>:<port>/servlet/files.
I see the following error in Jserv.log
ajp12: Servlet Error: NoClassDefFoundError:
oracle.ifs.protocols.dav.impl.IfsDavServlet
On the browser I get File not found error ( HTTP 404 )
Do I need to perform additional steps on Solaris machine ( apart
from executing apache setup script ).
Please help me.

Make sure you have started all the services:
- ifsjservctl -start
- ifslaunchdc
- ifslaunchnode
- ifsstartdomain
all are in the iFS bin directory.
Keith

FILE not found error: j2ee/home/applib/applications-mapping.xml (No such fi

Hi EveryBody
i have my applications-mapping.xml file already in the applib directory, but when i try to conect to a remote ejb i had this error[b]
FILE not found error: j2ee/home/applib/applications-mapping.xml (No such file or directory)
can anyone help??

gday
Is the error on the client or server?
What role in the application does applications-mapping.xml fulfill?
How are you loading the file in?
-steve-

File not found error when opening securedoc.html

We are having a sudden issue where recipients of our secure envelope emails will open a message from us with attachments and they will get a "File Not Found" error message.
We are still using a Post X appliance, but no config changes were made whatsoever and this started happening since last weekend. (Oct. 9-11)
I did reboot the Post X box and thought the problem was fixed w/ the reboot. I sent a secure message to myself and then opened it along with the attachment and all was good. I sent the second test and the problem was back; "File not found".
I have noticed that when I get file not found the address bar in my browser is pointing to: https://res.cisco.com/websafe/eo/error?error=notfound
The time after rebooting when it did work it pointed to file on my local computer hard drive:
file:///C:/Documents%20and%20Settings/mymachine/Local%20Settings/Temporary%20Internet%20Files/PXTemp/-6pAQ4_Y5hJEmKdQhtG8lhNx0zo!/PX_L_1255377132267.html
Any ideas what could have caused this sudden issue? How do we resolve? I have a call into support, but they have been researching it all day and our secure mail is down!

used bridge, didn't work.
tried right-click, double click..open in program.
same error.
files work in other adobe products.....
only way to get a jpg in there is to "paste" it in.

File not found error (no error number or file identified)

Hi,
I am getting a file not found error when trying to render a project. The message box does not identify which file is not found nor is there an error message number. I by trial and error tracked the file to a video connected to the PAL_Projector Menu. It is the PAL_Projector.m2v file. I reconnected it but it still gives a file not found error on render. Any suggestions and why do we get these ridiculous error messages in this day and age. The message should identify the file and how to fix the problem.
Regards
Richard

gday
Is the error on the client or server?
What role in the application does applications-mapping.xml fulfill?
How are you loading the file in?
-steve-

Aspects Developer "Verifier jar file not found error"

Similar Messages

Maybe you are looking for