ASR9K Series devices inventory is not working.

Hi all. Inventory in CiscoWorks with new devices ASR9K Series is not working. CW version: LMS3.2.1. Device: ASR-9006 AC Chassis. Credentials correct. Can any help me?
Screenshot1: inventory request fail.
Screenshot2: RME knows Cisco ASR9006 Router.

Hello again and thx for advice,
I've tried the solution from Cisco for this bug (CSCte95623 ), by manipulating delays values in cmdsvc.properties file and restarting cfgmngmt process. I've changed delay values in very different manner (delay after connect, tunesleepmills, login, e.t.c). Unfortunately this solution didn't help. A CDA work for SSH fails all the time. Also i've manipulated
ssh rate-limit and ssh session-limit values on device. It's a pity that opportunity to set on only sshv1 on device doesn't exist, so CW tries to connect only with sshv2 and there is no chance to check how it work with sshv1.
I'm becoming a bit desperate about that issue. Any ideas?!
There is some output from ssh debugs on device:
debug ssh server
RP/0/RSP1/CPU0:May 31 12:02:14.068 : SSHD_[1114]: Spawned new child process 5869901
RP/0/RSP1/CPU0:May 31 12:02:14.149 : SSHD_[65869]: Client sockfd 3
RP/0/RSP1/CPU0:May 31 12:02:14.151 : SSHD_[65869]: Setting IP_TOS value:192
RP/0/RSP1/CPU0:May 31 12:02:14.152 : SSHD_[65869]: After setting socket options, sndbuf33792, rcvbuf - 33792
RP/0/RSP1/CPU0:May 31 12:02:14.153 : SSHD_[65869]: Connection from ------------ port ---------
RP/0/RSP1/CPU0:May 31 12:02:14.158 : SSHD_[65869]: (addrem_ssh_info_tuple) user:()
RP/0/RSP1/CPU0:May 31 12:02:14.162 : SSHD_[65869]: Session id 0
RP/0/RSP1/CPU0:May 31 12:02:14.162 : SSHD_[65869]: Exchanging versions
RP/0/RSP1/CPU0:May 31 12:02:14.164 : SSHD_[65869]: %SECURITY-SSHD-6-INFO_GENERAL : Client ------ closes socket connection
RP/0/RSP1/CPU0:May 31 12:02:14.164 : SSHD_[65869]: %SECURITY-SSHD-3-ERR_GENERAL : Failed in version exchange
RP/0/RSP1/CPU0:May 31 12:02:14.164 : SSHD_[65869]: In cleanup code, pid:5869901, sig rcvd:0, state:1
RP/0/RSP1/CPU0:May 31 12:02:14.166 : SSHD_[65869]: Cleanup sshd process 5869901, session id 0
RP/0/RSP1/CPU0:May 31 12:02:14.171 : SSHD_[65869]: Closing connection to --------
RP/0/RSP1/CPU0:May 31 12:02:14.171 : SSHD_[65869]: Sending Disconnect msg
RP/0/RSP1/CPU0:May 31 12:02:14.172 : SSHD_[65869]: sshd_shm_acquire_lock: SHM Lock is NULL
RP/0/RSP1/CPU0:May 31 12:02:14.172 : SSHD_[65869]: sshd_shm_unlock: SHM Lock is NULL
RP/0/RSP1/CPU0:May 31 12:02:14.184 : SSHD_[1114]: Signal 18 received in handler: pid 5869901
RP/0/RSP1/CPU0:May 31 12:02:14.207 : SSHD_[1114]: ratelimit_msecs:1000.000000, ratelimit_count:1
RP/0/RSP1/CPU0:May 31 12:02:14.207 : SSHD_[1114]: elapsed:145.976000, ratelimit_msecs:1000.000000, count:1
RP/0/RSP1/CPU0:May 31 12:02:14.207 : SSHD_[1114]: %SECURITY-SSHD-6-INFO_GENERAL : Incoming SSH session rate limit exceeded
And CDA ssh work log from CW:
Thu May 31 12:10:17 MSD 2012 ],INFO ,[Thread-1],com.cisco.nm.rmeng.util.rmedaa.RMEDeviceContext,getCmdSvc,1571,Iam inside ssh ....
[ Thu May 31 12:10:17 MSD 2012 ],INFO ,[Thread-1],com.cisco.nm.rmeng.util.rmedaa.RMEDeviceContext,getCmdSvc,1573,Initial time_out : 0
[ Thu May 31 12:10:17 MSD 2012 ],INFO ,[Thread-1],com.cisco.nm.rmeng.util.rmedaa.RMEDeviceContext,getCmdSvc,1583,Computed time_out : 30
[ Thu May 31 12:10:17 MSD 2012 ],INFO ,[Thread-1],com.cisco.nm.rmeng.util.rmedaa.RMEDeviceContext,getCmdSvc,1599,After computing time_out : 30
[ Thu May 31 12:10:17 MSD 2012 ],INFO ,[Thread-1],com.cisco.nm.rmeng.util.rmedaa.RMEDeviceContext,getSshCmdSvc,1637,inside getSshCmdSvc with timeout : 30000
[ Thu May 31 12:10:17 MSD 2012 ],INFO ,[Thread-1],com.cisco.nm.rmeng.util.rmedaa.RMEDeviceContext,getSshProtocols,1743,Inside getsshprotocols with time out : 30000
[ Thu May 31 12:10:17 MSD 2012 ],INFO ,[Thread-1],com.cisco.nm.rmeng.util.rmedaa.RMEDeviceContext,getSshCmdSvc,1651,SSH2 is running
[ Thu May 31 12:10:17 MSD 2012 ],INFO ,[Thread-1],com.cisco.nm.xms.xdi.pkgs.LibCda.CmdSvc_CDACredTypeHandler,verify,136,Got CmdSvc for SSH
[ Thu May 31 12:10:17 MSD 2012 ],INFO ,[Thread-1],com.cisco.nm.xms.xdi.pkgs.LibCda.CmdSvc_CDACredTypeHandler,verify,141,Before Resetting the counters i.e before invoking counters for CredType :: SSH
[ Thu May 31 12:10:17 MSD 2012 ],INFO ,[Thread-1],com.cisco.nm.xms.xdi.pkgs.LibCda.CmdSvc_CDACredTypeHandler,verify,151,After Resetting the counters i.e before invoking counters for CredType :: SSH
[ Thu May 31 12:10:17 MSD 2012 ],INFO ,[Thread-1],com.cisco.nm.xms.xdi.pkgs.LibCda.CmdSvc_CDACredTypeHandler,verify,156,Getting Primary credentails to reset again to Primary only..
[ Thu May 31 12:10:17 MSD 2012 ],INFO ,[Thread-1],com.cisco.nm.xms.xdi.pkgs.LibCda.CmdSvc_CDACredTypeHandler,verify,201,trying to connect for SSH
[ Thu May 31 12:10:18 MSD 2012 ],ERROR,[Thread-1],com.cisco.nm.xms.xdi.pkgs.LibCda.CmdSvc_CDACredTypeHandler,verify,272,Got CmdSvcException com.cisco.nm.lib.cmdsvc.CmdSvcException: java.net.SocketException: Connection reset
    at com.cisco.nm.lib.cmdsvc.OpConnect.invoke(OpConnect.java:57)
    at com.cisco.nm.lib.cmdsvc.SessionContext.invoke(SessionContext.java:299)
    at com.cisco.nm.lib.cmdsvc.Engine.process(Engine.java:57)
    at com.cisco.nm.lib.cmdsvc.LocalProxy.process(LocalProxy.java:22)
    at com.cisco.nm.lib.cmdsvc.CmdSvc.connect(CmdSvc.java:190)
    at com.cisco.nm.lib.cmdsvc.CmdSvc.connect(CmdSvc.java:166)
    at com.cisco.nm.xms.xdi.pkgs.LibCda.CmdSvc_CDACredTypeHandler.verify(CmdSvc_CDACredTypeHandler.java:202)
    at com.cisco.nm.xms.xdi.pkgs.LibCda.GenericCdaHandler.checkSanity(GenericCdaHandler.java:37)
    at com.cisco.nm.rmeng.inventory.cda.job.DoCDAonDevice.checkSanity(CdaJobEngine.java:1565)
    at com.cisco.nm.rmeng.inventory.cda.job.DoCDAonDevice.run(CdaJobEngine.java:1429)
    at com.cisco.nm.rmeng.inventory.cda.job.CdaJobMonitor$ExecutorThread.run(CdaJobMonitor.java:244)
[ Thu May 31 12:10:18 MSD 2012 ],ERROR,[Thread-1],com.cisco.nm.xms.xdi.pkgs.LibCda.CmdSvc_CDACredTypeHandler,verify,308,exception occured at the time of closing cmdsvccom.cisco.nm.lib.cmdsvc.CmdSvcException: java.net.SocketException: Connection reset
    at com.cisco.nm.lib.cmdsvc.OpConnect.invoke(OpConnect.java:57)
    at com.cisco.nm.lib.cmdsvc.SessionContext.invoke(SessionContext.java:299)
    at com.cisco.nm.lib.cmdsvc.Engine.process(Engine.java:57)
    at com.cisco.nm.lib.cmdsvc.LocalProxy.process(LocalProxy.java:22)
    at com.cisco.nm.lib.cmdsvc.CmdSvc.connect(CmdSvc.java:190)
    at com.cisco.nm.lib.cmdsvc.CmdSvc.connect(CmdSvc.java:166)
    at com.cisco.nm.xms.xdi.pkgs.LibCda.CmdSvc_CDACredTypeHandler.verify(CmdSvc_CDACredTypeHandler.java:202)
    at com.cisco.nm.xms.xdi.pkgs.LibCda.GenericCdaHandler.checkSanity(GenericCdaHandler.java:37)
    at com.cisco.nm.rmeng.inventory.cda.job.DoCDAonDevice.checkSanity(CdaJobEngine.java:1565)
    at com.cisco.nm.rmeng.inventory.cda.job.DoCDAonDevice.run(CdaJobEngine.java:1429)
    at com.cisco.nm.rmeng.inventory.cda.job.CdaJobMonitor$ExecutorThread.run(CdaJobMonitor.java:244)
[ Thu May 31 12:10:18 MSD 2012 ],INFO ,[Thread-1],com.cisco.nm.xms.xdi.pkgs.LibCda.CmdSvc_CDACredTypeHandler,verify,310,Some exception not handled....
[ Thu May 31 12:10:18 MSD 2012 ],INFO ,[Thread-1],com.cisco.nm.xms.xdi.pkgs.LibCda.CmdSvc_CDACredTypeHandler,verify,312,Not for enable test

Similar Messages

Usb composite device is an older usb device and might not work in USB 3

I recently bought one Lenovo Yoga 2 11 laptop running Windows 8.1 (64 bit).
When I try to connect my old Brother MFC-3240C printer using USB (2.0), it doesn’t work.
Below are the steps performed:
Connected the printer to USB 2.0 port on laptop (on the right side). Automatically installed the printer driver (no exclamation mark beside printer icon)
When the printer didn’t print, I tried to use troubleshoot as below:
Control Panel->Hardware and Sound->Devices and Printers->Right Click on Printer Icon->Troubleshoot.
It came up with USB composite device is an older usb device and might not work in USB 3.0
Removed the printer and re-installed the driver. It is all the same.
Any help will be greatly appreciated.
FYI – the same printer works fine with my older laptops running Windows 7.

Already checked Brothers website for the printer drivre for Windows 8.1 (64 bit).
It says ... The built-in driver is already included with Windows® Operating System or is available through Windows® update.
So, installed the default driver for the printer that is available with Windows 8.1.
Even connected the printer with USB 3.0 port on the laptop, but it is all the same.

Hi pls help me my iphone is forest i update but after my iphone is devices open is not working i click but sim card installed , attempting to activate this one coming pls help me answer me

hi pls help me my iphone is forest i update but after my iphone is devices open is not working i click but sim card installed , attempting to activate this one coming pls help me answer me

Sounds like your phone was hacked to use with your carrier. Updating it has relocked the phone to it's original carrier. You will not get the phone working again without a SIM from the original carrier.

USB devices and Webcam not working or installing on Pavilion Laptop

Hi there,
I have a HP Pavilion Dm3 1030 sa,
For a while now certain USB devices have just not worked on the laptop, specifically printers and mice, despite me reinstalling the drivers for those devices on the laptop. I tried the devices on other computers and they worked fine.
This was annoying but I put up with it.
Now the webcam and microphone have stopped working and are no longer recognised by the computer. I have reinstalled the webcam software but cannot find the drivers for it. The software (arc soft webcam) says the inbuilt webcam is not connected.
I have been able to get my iphone to connect via usb and usb drives work most of the time. I don't really know what is going on. When I look at devices that don't work in device manager It says that there is a USB I/O error. I have tried reinstalling the drivers using device manager but that didn't work either. Any advice would be appreciated. Not being able to use a mouse is annoying as track pads are slow.
Pn vj409ea#ABU
Is my notebook in the warranty period? No (three months out)
Is the originally installed OS still installed (Yes)
Have I changed the partitions (NO)
Thanks for any help
Kieran Latham

run an extended _*Apple Hardware Test*_.
JGG

Bootcamp "no bootable device" Option key not working

Ok recently rebuilt 2 older "Intel Core Duo" Mac Mini's with SSD drives. They work great and have been flying, however on one of them I wanted to setup BootCamp so that I could run Win7 Pro on it as well.
So here is what I did...
- When I first built the Mini's I used a bootable Firewire drive with Snow Leopard installed
- I had the drive divided into 2 partitions at first
- when I tried to install BootCamp error message kept telling me it needed only one part, so I finally made Primary OSX part one big part, then I was able to get BootCamp going
- I choose "I have Mac OSX Install disc" because "Download the Windows support software" would not work
- Next it created the BOOTCAMP part and told me to put Win OS disk in drive
- I put in an OEM Win 7 CD I borrowed from work, so I could see how it worked.
- When it rebooted, it Did not recognize CD and all screen said was choose Option 1 or 2, (neither option had any text, and the keyboard would not take any input)
- Tried numerous times to get back to OSX, used every boot option I could find online but none would work.. Also Mini would not give back CD for nothing
- Next I opened up Mini to get to CD, I had a friend that was able to get one out by opening up the actual dvd drive but I was trying to avoid that. So what I ended up doing was using a putty knife to keep CD from spinning on bootup. After about 10 to 15 seconds of the CD not spinning, it finally kicked it out for me. (YAY!!)
- New problem, now I have the "No Bootable Device - - Insert Boot Disk And Press Any Key"
- I have tried the following. Removing the drive and plugging in a Sata to USB cable so I can access it from other Mini
- I thought that if I deleted the BOOTCAMP part it would allow me to boot back to OSX, I tried renaming Part to what it was before, I have tried putting in a Formatted drive with no OS on it, I have tried installing the contents of a Win 7 OEM CD onto Formatted drive as a single FAT part.
Nothing Works, I am either stuck at the "No Bootable Device" screen, or if I turn on Firewire drive with Snow Leopard I get a blinking cursor that never shows any text.
At this point, I don't want BootCamp on that Mini anymore, I just want my working OSX, but I cant get anything to work and I'm afraid to stick a CD in the Mini for fear it wont give it back to me and I end up damaging it getting it out. I even created a CD with rEFIt on it, but after I formatted a totally different drive and the Mini is still expecting to finish what it start with BootCamp, it leads me to believe that there is some BIOS or data stored somewhere that is not on the harddrive. If so, could I pull the RAM, or push some sort of master Reset button some where?
I'm also thinking that I need a non mac USB keyboard, perhaps maybe there or know Aluminum Keyboard drives in the memory where the Mini is trying to finish the BootCamp install.
As a side note, I sure wish Apple would have designed the Mini to fail Safe not fail broken.
Please Help.
Randy

The Formatted test drive did not have Any OS on it. I just thought that since that was how I installed it originally, that it would work.
I put in SSD straight out of package, connected Firewire drive with SnowLeopard install, and it booted to it and asked me for to install to which drive, I choose SSD and it took off..
So what your saying is, do the same thing but hang SSD from broken Mini onto working Mini and boot up with same Firewire drive, and have it install OS back onto Broken SSD drive.
Assuming all of this works correctly, why would plugging it back into broken Mini work? Wont the Broken Mini still be looking for BootCamp to finish what it started? (just seems that way from what I've experienced so far)

Macbook air stuck in No bootable device, external keyboard not working.

Hello.
Yesterday tried to install Windows 7 via Bootcamp. As everyone else got to "No bootable device - insert boot disk and press any key."
After few seconds I realized that keyboard is not working. Googled it and found out that I need to buy an external keyboard.So I did.
Guess what,external keyboard is not working too. Tryed with different PC, it worked with them.
So what now?

The Formatted test drive did not have Any OS on it. I just thought that since that was how I installed it originally, that it would work.
I put in SSD straight out of package, connected Firewire drive with SnowLeopard install, and it booted to it and asked me for to install to which drive, I choose SSD and it took off..
So what your saying is, do the same thing but hang SSD from broken Mini onto working Mini and boot up with same Firewire drive, and have it install OS back onto Broken SSD drive.
Assuming all of this works correctly, why would plugging it back into broken Mini work? Wont the Broken Mini still be looking for BootCamp to finish what it started? (just seems that way from what I've experienced so far)

HT1212 i have forgot my passcode and tried to erase the device but its not working

i have forgot my ipod passcode and tried to erase the device but it wont work

Disabled
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.

Network controller, pci device, wifi drivers not working

my device model is dv6-6121tx
i am not able to install network controller and PCI device drivers...
also my wifi is not working..
no wireless adapter in device manager..
please help...
This question was solved.
View Solution.

Hello again samyak. You are very welcome!
The first device (the virtual adapter) is virtual network which allows you to use the computer as a "software router." Unless you're using this PC as an Access Point this device is useless to you. This article has more information on the service. Your best bet is to just disable it. Try the following.
Click Start, go to "All Programs," and select "Accessories."
Right click on "Command Prompt" and select "Run as Administrator."
Type the command "netsh wlan set hostednetwork [mode=disallow] and press Enter. This should disable the virtual adapter.
Exit Command Prompt, reboot the computer, and verify that the device is no longer listed.
The device with the "ACPI/HPQ0004" ID actually returned two results. The first was the Quick Launch Button software. The other was related to Hard Drive Protection. Try this driver.
Make sure to reboot after all of these instructions have been completed. Then go back to Device Manager and verify whether everything looks as it should.
Continue to have a great day!
Please click the white star under my name to give me Kudos as a way to say "Thanks!"
Click the "Accept as Solution" button if I resolve your issue.

Prime Infrastructure 2.2- problems: Wired Detailed Device Inventory report not running / Cisco 5500 WLCs no listed in subgroup

New installation of Prime Infrastructure 2.2.0 (PI-VA-2.2.0.0.158.ova)
installed fixes/software/device packs:
PI 2.2.1 Poodle Fix (installed)
PI 2.2.1 Maintenance Release (installed,ncs stopped,rebooted)
Prime Infrastrucutre 2.2 Device Pack 3 (installed,ncs stopped,rebooted)
Licences installed (ncs stopped,rebooted)
Added all devices via Bulk Import (Inventory>Device Management>Network Devices)
Problem 1:
The Cisco 5500 WLCs are not listed in Inventory>Device Management>Network Devices (see screen shot) but listed under "All Devices"!
The Cisco 4400 WLCs and the 8500 WLCs are listed within their subgroup.
Devices are in "Managed State"
Problem 2: fixed! (Browser issue)
Problem 3:
Unable to run "Wired Detailed Device Inventory" report because I get the error message: Failed to run report: Unable to retrieve data for: Chassis Information (if Chassis Information is selected, if System Information is selected I get the error message with ...retrieve data for:System Information)
All devices do have an "Admin Status = Managed" and the Last Inventory Collections Status = Completed.
Has anyone the same issues or a tip for me?
Another topic, the "User Defined Fileds" are not exported when with running a "Device Export" (Inventory > Device Management > Network Devices). ;-(
BR
Bastian

Hallo Bastian,
I think you still have browser issue, Using IE is still the best with Prime.
I have exactly same prime 2.2 and installed fixes/software/device packs.
I have no problem I can see all views. I use now IE 11, with Chrome 42.0.2311.90 and firefox 37.01 I have problems too with lots of views. You have not tell what browser + version you have.
Since you have same prime 2.2 as me. I have other problems, can you check yours?
Can you see a functional CLI template page at Configuration > Templates > Features & Technologies:
https://supportforums.cisco.com/discussion/12481691/can-cisco-prime-22-still-do-simple-ad-hoc-deployment-job-cli-over-all-switches
Do you have SNMP Connectivity Failed while Verify Credentials has no errors all green and checked.
https://supportforums.cisco.com/discussion/12494786/snmp-request-exceeds-internal-data-buffer-512-bytes-prime-22-asa-5545

Apple Mobile Device USB Driver Not Working (Code 10)

i have a windows 8 laptop and the "Apple Mobile Device USB Driver" in the Device Manager recently stopped working, it has this little yellow triangle with a '!' in it next to it. i have restarted my computer/iphone several times, i've reinstalled itunes a few times, i've tried different USB ports and different cords.
it also says "This device cannot start. (Code 10)"
Please let me know if you have had and fixed this problem
thanks

Yep...^^
I just fixed my ipod nano problem on my own and figured I'd share as I have just spent the last 4 hours trying to trouble shoot all of Apple's problems...following everyone's tips...nothing worked until I figured it out on my own.
I'm running windows 7 and have an Ipod Nano (6th Gen). Hard drive crashed on computer. Replaced HD. Everything works fine now. Downloaded iTunes along with all other programs. Nano wouldn't show up or sync on iTunes. Said Device Driver Software was not successfully installed (some USB problems). Tried everything. Finally, I figured it out.
Disconnect Nano. Uninstall iTunes AS WELL AS
Apple Application Support, Apple Mobile Device Support, and Apple Software Update. Apple only
tells you to uninstall iTunes and reinstall..restart computer bla bla bla. I said screw it and uninstalled all Apple programs (well, the listed ones above). I hooked up my nano to my computer to make sure the device manager recognized it without anything else plugged in...and it did. I unplugged it. Reinstall iTunes and all three other Apple programs listed above will also reinstall. I opened iTunes and plugged in my nano. It started with the "installing device driver software" and I was sure
it wasn't going to work. Well, it did work. My nano showed up in the upper right bar of iTunes and synced. Unreal... I unplugged my nano and plugged in the wife's. Once again, "installing device driver software." Voila! Her's showed up and synced too. I plugged mine back it to make sure it worked and it did. I'm done. It's working. Hope these steps work for you as well.

HD for Apple Devices (10 Mbps) not working

I use Compressor 4 to convert a bunch of videos...
Unfortunately the preset "HD for Apple Devices (10 Mbps)" is not working - result = "Failed"
but the setting HD for "Apple Devices (5 Mbps)" >is< working.
I have a Mac Pro 2010, 12-core 2.66 GHz with 32 GB RAM with an ATI Radeon HD 5870 1024 MB.
There should be no performance problem... but what's wrong? Any ideas how to change this?

I've found the problem... it depends on the file name. The file name was
Chill & Ride 2011 - slomo long v4.mov
I've changed the name to "slomo.mov" and it worked!
Strange...
The result: http://vimeo.com/34847568 ;-)

PUK code under device settings do not work! What now?

PUK code supplied in my account, under manage my device does not work how do I unlock my phone now?

Hi,
You need to contact EE CS then and ask them for the correct code.
You can call them on 07953 966 250 on any other phone assuming you cannot call 150.
Thanks,

Device removal schedule not works?

Dear all,
I have been set to remove a device with it has not made contact after 30 days, but it is not working. The device still in management zone even the device not contact over this period.
I am sure I only have the default system setting and no other override settings in the zone folder.
Please help.

manng228,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/

USB Devices Recognized but not working!

Having issues with working USB devices, but only some...??? Very confused. Here it is:
- 20gig ipod, ipod mini all recognized by apple system profiler and working (shows up on desktop) Through USB and firewire
- Canon Rebel XT (USB 2.0), Macally mouse(USB 1.0), RECOGNIZED in apple system profiler...but not working!!! Iphoto doesn't recognize a camera is connected and mouse not responding
The camera in mouse i tested in another mac and they are working.
If my logic board is cooked, then why would the ipods still work?? So, what is the problem???? PLEASE HELP
luc

Luke, many of the peripials such as cameras, printers, scanners, some will plug right in and work.
Others, need to plugged in and restart your computer,for them to work.
and last but not least some need there own drivers to operate correctly.
Those that need drivers normally come with an insallation CD for this purpose... Cheers...Don

TS1559 halooo sir/madam,I am using iphone4s,after update ios 7 my device wifi is not working wifi button also not enable pls give me the solution

i am using iphone 4s,after update ios7 the wifi is not working and wifi button also not eneble its dimmed pls give me the solution.

http://support.apple.com/kb/ts1559

ASR9K Series devices inventory is not working.

Similar Messages

Maybe you are looking for