Assembly version showing up as 0.0.0.0

This is a trivial but annoying problem. When my C#.Net CLR Assembly is loaded in SQL Server the following shows up in the ERRORLOG:
... Assembly 'MyAssembly, version=0.0.0.0, ... loaded into ...
How do I get it to show the correct version number? I have this defined in the build:
[assembly: AssemblyVersion("1.2.3.4")]
In addition, a query of AssemblyProperty() shows the correct version parts.
Is this just a snafu in SQL Server, or do I need to add something additional to Assembly Properties in the build?
I am using Visual Studio 2010.
Thanks.

Do you have a strong-named assembly? See
http://msdn.microsoft.com/en-us/library/51ket42z(v=vs.110).aspx (Versioning is done only on assemblies with strong names.) and
http://msdn.microsoft.com/en-us/library/wd40t7ad(v=vs.110).aspx (describes what a strong-named assembly consists of).
Cheers, Bob

Similar Messages

HT1338 Tried upgrading to 10.8.2. It failed the upgrade. Currently the Software version shows " System Version: OS X 10.8.1 (12B19)" . But App store does not show 10.8.2 as an update

Tried upgrading to 10.8.2. It failed the upgrade. Currently the Software version shows " System Version:
OS X 10.8.1 (12B19)" . But App store does not show 10.8.2 as an update

You can Contact MAS here.

After updating from "about firefox",there're always two version showing up in my control panel's program list.

I think everytime firefox update itself, it doesn't clean the old version's register key so there're both two version showing up in the control panel's program list.
When you uninstall the old version, the new one disappears too.

Firefox can find plugins in several locations, but Firefox 21 changed the location of the "shared" plugin folder so older installers like the Microsoft Windows Media Plugin no longer drop the DLL file in the correct location.
There apparently are two ways to address this:
(1) Change a Firefox preference so that Firefox checks the old location. Here's how:
(i) In a new tab, type or paste '''about:config''' in the address bar and press Enter. Click the button promising to be careful.
(ii) In the filter box, type or paste '''plugins''' and pause while the list is filtered
(iii) Double-click '''plugins.load_appdir_plugins''' to switch its value from false to true.
This will take effect after you restart Firefox.
(2) Copy the plugins folder to the new location. Here's how on Win 7 64-bit:
Open a Windows Explorer window to:
C:\Program Files (x86)\Mozilla Firefox
Right-click and copy the '''Plugins''' folder
Double-click the '''browser''' folder to open it
Right-click and paste
Right-click the new copy of '''Plugins''' and rename it to '''plugins'''
After restarting Firefox, the plugins in that folder should now be available.
''Edit: I suggest just doing #1.''

For iOS the ipad version shows the folio that has been published, but the iPhone app is not.

I am responsible for handling the apps and not at all involved with or know how the folio creation process works.
When I build the app for iOS the iPad version shows the folio that has been published, but the iPhone app is not showing the folio.
Is this something related to the build process or how the folio was created?
The folio also shows up in the Android app (at least the phone I have tested with).
Thanks,

"Android and iOS viewers have different requirements for displaying folios. Any folio size you create can appear in an Android viewer. The articles are scaled and letterboxed as needed. However, on the iPad, the viewer displays only folios with a 4:3 aspect ratio. The iPhone viewer displays only folios with a 3:2 or 16:9 (1136x640) aspect ratio."
Here is the entire post if you'd like to read more: Digital Publishing Suite Help | Creating documents for multiple devices

I have upgraded to latest version, but old version shows when i open Iphoto.

I have updated to the latest versions of iPhoto, but the old version shows when I open Iphoto. Buttons like layout and design options are unavailable ...What to do?

Well then you have the current version
I suspect you are looking at a web site showing a different view than you have chosen
LN

How To Upgrade My iPod? Version Showing Me 6.1.6.. Now New Version 8.1.2.. I Want To Download New Version. Help Me Please...

How To Upgrade My iPod? Version Showing Me 6.1.6.. Now New Version 8.1.2.. I Want To Download New Version. Help Me Please...

Sorry, you are running the highest iOS that you can
Cheers,
GB

TS1424 Downloaded wrong (album) version of a song and single version shows 'downloaded' so cannot purchase - help!

Can I download multiple versions of a song? Have album version and single version showing 'downloaded' so can't purchase

Make sure that you allow pages to choose their colors and that you haven't enabled High Contrast in the Accessibility settings.
*Tools > Options > Content : Fonts & Colors > Colors : [X] "Allow pages to choose their own colors, instead of my selections above"
*http://kb.mozillazine.org/Website_colors_are_wrong
*https://support.mozilla.org/kb/Websites+look+wrong

I'm editing a lot of wedding photos. For some reason, I have to double click on some of the photos to actually see my changes. It is not the case for all the photos in the folder.... only some of them. How can I make all the edited versions show?

I am editing a bunch of wedding photos. Everything has been fine until today..... I opened up the folder, and for some of the edited photos, I have to double click in order to see the edited version. So, when I look at all the photos in the browser, some of then show my changes..... others don't. I'm worried, because I will have to post them for the bride, and I am concerned about why this is happening. I still have the images on the memory card and also have a duplicate of all the photos in iphoto..... but I've spent hours editing these photos...... and I really don't want to start all over again.

I am editing a bunch of wedding photos. Everything has been fine until today..... I opened up the folder, and for some of the edited photos, I have to double click in order to see the edited version. So, when I look at all the photos in the browser, some of then show my changes..... others don't. I'm worried, because I will have to post them for the bride, and I am concerned about why this is happening. I still have the images on the memory card and also have a duplicate of all the photos in iphoto..... but I've spent hours editing these photos...... and I really don't want to start all over again.

Version Shows 4.2.1:Can't Update, Restore, or trnsfr photos or prchsd music

I have an ipod photo 20GB and after upgrading to itunes 7.0.1(7) the summary tab shows:
- 4.2.1 shows as software version (instead of 1.2.1)
- older ipod icon is pictured
- the version states"ipod is up to date" and the 'update' button is grayed out
....the 'restore' button is grayed out as well so I can't even restore from my
machine
- I'm missing the 'photos' tab
I can transfer all my non-itunes store purchased songs fine, but when I try to transfer the purchased ones, it says the software on my ipod is too old and that I need to go to use the 'update' button in the summary tab...which tells me I have the latest version! I'm caught in a loop and am beyond frustrated! I tried using my ipod on my husband's powerbook and it's fine on HIS computer! Correct version 1.2.1 comes up and itunes store music transfers...I restored the pod from his itunes, but even after doing that I still get the same result on mine. What is going on??? Help!
White iBook G3 Dual USB Mac OS X (10.4.7)

with those symptoms, it's probably worth checking on the following possibilities:
iPod Updater reports iPod nano or Fifth Generation iPod must be connected using FireWire
iTunes: No Photos or Videos tab in the iPod preferences pane in Mac OS X
iPod does not appear in iPod Updater or iTunes in Mac OS X

Visual Studio 2013, Different assembly versions?

I just upgraded to the Winodws 10 TP Build 9841 From Windows 8.1, and a project I had been working on in Visual Studio suddenly started throwing me these two errors:
1>C:\Program Files (x86)\MSBuild\12.0\bin\Microsoft.Common.CurrentVersion.targets(1697,5): warning MSB3277: Found conflicts between different versions of the same dependent assembly that could not be resolved. These reference conflicts are listed
in the build log when log verbosity is set to detailed.
1>C:\Program Files (x86)\MSBuild\12.0\bin\Microsoft.Common.CurrentVersion.targets(2234,5): warning MSB3283: Cannot find wrapper assembly for type library "MSHTML". Verify that (1) the COM component is registered correctly and (2) your target
platform is the same as the bitness of the COM component. For example, if the COM component is 32-bit, your target platform must not be 64-bit.
I cannot find anywhere on how to resolve these issues, so any help would be greatly appreciated. I would really hate to lose this project.

Hi Hansausage,
Thank you for posting in MSDN forum.
>>I just upgraded to the Winodws 10 TP Build 9841 From Windows 8.1, and a project I had been working on in Visual Studio suddenly started throwing me these two errors.
According to your description, could you please tell me which kind of project you work in the Visual Studio?
What did you do operation and then get the two errors?
Where did you see the error?
To further help you support this issue, please tell me more detail message about your issue.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Incorrect version showing after Oracle version upgrade

Dear All
As we have upgraded our oracle version from 10.2.0.4.0 to 11.2.0.2.0. As we go in the sqlplus / as sysdba " . it is showing the
correct version. ever after i checked through 'select version from
V$instance' showing the correct result also. 11.2.0.2.0. When we go ourenterprise portal & check the oracle version in the system info of enterprise portal showing "Oracle Database 11g Release 11.1.0.0.0 -Production"
we are not able to understand why it is showing the wrong version in the portal.
Can anybody help to trace it out.
Thanks
regards
Ravi Kant Arya
+91 9540990385

Ravi Kant Arya wrote:
Dear All
>
> As we have upgraded our oracle version from 10.2.0.4.0 to 11.2.0.2.0. As we go in the sqlplus / as sysdba " . it is showing the
> correct version. ever after i checked through 'select version from
> V$instance' showing the correct result also. 11.2.0.2.0. When we go ourenterprise portal & check the oracle version in the system info of enterprise portal showing "Oracle Database 11g Release 11.1.0.0.0 -Production"
>
> we are not able to understand why it is showing the wrong version in the portal.
>
> Can anybody help to trace it out.
>
> Thanks
> regards
> Ravi Kant Arya
> +91 9540990385
Hi Ravi,
Could it be belong to the Oracle client release?
Best regards,
Orkun Gedik

Only the Europen version shows up in the market pl...

I traveled to Europe a few weeks ago and when I got back "Here" stopped working. I uninstalled it and went to reinstall it but it only shows me the Europeon version.
Rebooted phone...several times
My phone's region setting is set to USA
Installed it from the Nokia site but it still doesnt display maps...
My favs. show up and even look spacially correct...but no underlyng map data
I removed and reinstalled the maps...still no
My theory is that the app is ignoring my region...or my phone is.

Did you just reinstall the here maps app or the map data?
If you have not downloaded the map data for US yet, you can download it by going to Settings->swipe left to applications->maps->click download maps button. The US map is about 2.5GB - 3GB, it may take a while to download the complete map.
The silence will fall

Wrong version showing under "My Products"

3 or 4 years ago we bought a new computer from Costco, and among other things, it came pre-loaded with Adobe Premiere Elements 10 and Adobe Photoshop Elements 10. Before that we had an old version of Photoshop Elements (5). Every time I try and register version 10, it says it already is registered, but under "My Products" it shows only version 5. I am not expecting our computer to crash, but would like to get the problem resolved so if it did we could reload Photoshop Elements 10. No, there was no Adobe documentation or serial number that came with the CPU. Thanks!

You can still try to register your product by going to:
Help >> Product Registration
See this picture:
Hope this resolves anything you may be concerned about. Just for interest sake, did you receive any CDs with your machine just in case you need to reinstall the product? If the answer is NO then I don't know how this info is going to help you. Without the CD and Serial number, it is almost impossible to re-install the product. The download version from Adobe site may not work with your serial number (if you have one) and vice versa. As soon as the machine dies, so does the license to any installed products unless you have media kits for them. That is how Microsoft operates and I guess that is how Adobe would operate.
Anyway, register the product and your serial number from the machine will be transferred to Adobe servers under your account.
Good luck.

ACR version mismatch - two versions show as installed

Photoshop CS - installed 2.4 then attempted to install version supporting Nikon D70s. When 4.4.1 reported as not compatible, moved it out of File Formats and moved 2.4 back in. "System Info" now shows both installed (only one is in place) and displays mismatch error message.
It appears Photoshop saw 4.4.1 and set a flag that was not unset.
Suggestions???

ACR 4.4.1 is only compatible with Photoshop CS3. You must still have it somewhere on your computer. It has to be deleted from your computer. The only version of Camera Raw that is available for Photoshop CS is version 2.4. There will be no more updates. However, if you download the 4.4.1 version of the DNG converter and convert your files to Digital negative (DNG), you will be able to open those files with Photoshop CS and Camera Raw (ACR) 2.4.

Older Version showing on updated install

Since 11.0.06, when upgrading, Run Advertised Programs shows the "Display Name" as the latest version, but the "Version" as the pre-existing version.
AcroRD32.exe also shows the older version, and, subsequently, when opening Reader, it is the older version.
The update is running successfully.
I have tried un-installing the older version using the Adobe Product removal tool, but still get this issue.
This has happened on 11.0.07, 11.0.08 and now 11.0.09
Any ideas?

I cannot explain what is happening, but I would suggest to uninstall Reader, then do a fresh install of 11.0.09.

Assembly version showing up as 0.0.0.0

Similar Messages

Maybe you are looking for