Asset Cost Adjustmet

hello,
Can anybody tell me what is meant by transaction type: Future Adjust in mass additions? How does that affect asset depreciation?
Regards,

Hi,
Oracle Assets allows you to adjust both current and future assets, including CIP
assets.
Oracle Assets does not process these future transactions until the system opens
the period in which the effective date falls.
Future adjustments are limited to cost
adjustments only. These adjustments can be made to capitalized assets, including fully reserved ones, that have already been placed in service. You cannot, however, adjust retired assets.
Thanks
Sunil

Similar Messages

  • Does anyone had done mass adjustment on Asset Cost to the Asset's NBV?

    Hi,
    I want to see if any one had done Asset Cost Revaluation due to acquisition; to Compliance with GAAP accounting rules related to the acquisition of our company. We want to adjust all our Asset Cost to their current NBV and adjust the current Accumulated Depreciation to $0. Then Assets will be depreciated begining on the acquisition date of the company using the existing depreciation useful lives, not the remaining useful life. All the other depreciation conventions and methods will not be changed.
    I can't use the AM Mass Revaluation process as it can only adjust cost by amount or percent. We don't want to do an IUT to the same BU with action of ADD as we don't want to generate any new asset id. Any advice or suggestion will be greatly appreciated.
    Thanks,
    Ali

    Doug,
    I had already started along that path, by removing the Microsoft mouse driver (which didn't fix the problem). However, starting the system in safe mode was a good baseline, as it went to sleep as it should - confirming a software-related issue.
    I figured it would actually be easiest to shoot this bug by starting from scratch with an erase and install. After each tweak (ie, turn firewall on), software add (ie, clamXav), or update to the system, I tested it's sleep ability. And I found the bug/issue.....checking 'enable firewall logging' under the advanced options on the firewall tab, in the sharing preferences pane. No kidding. Stealth mode and UDP can be checked, just not firewall logging. Dunno why, however, the world is now at peace, able to sleep as needed.

  • Any standard report to show WBS,settlement, asset no and asset cost/value

    Hi All,
    Please advice . Is there any standard report to show WBS,settlement, asset no and asset cost/value ? I tried tcode kosrlist_pr but it does not show asset cost/value.. it shows only WBS,settlement and asset no.
    Thank you.
    Best Regards,
    Nies

    Dear,
    der is no such standard report to show WBS,settlement, asset no and asset cost/value as perv my knowlwdge. so do one thing select one standard report which is more similar to standard report to show WBS,settlement, asset no and asset cost/value but some of like asset no or asset cost or some other values not reflecting in that std report. den u take the Table name and field name of that particular fields which u wann reflect in the report. use the logic of STD TC of SAp which more similar to which u wanna preapre the New TC. tae help of Abaper. tell ur querry and content of ur report . he will definately do it
    if ur get my ans reward with points
    Regards
    Rakesh

  • ASSET COST ADJUSTMENTS 시 생성되는 분개

    제품 : FIN_FA
    작성날짜 : 2003-12-02
    ASSET COST ADJUSTMENTS 시 생성되는 분개
    ==================================
    PURPOSE
    Cost Adjustment시 GL에 생성되는 분개를 소개하는 Note입니다.
    Explanation
    자신이 취득된 Period에는 Jornal Entries 가 생기지 않습니다. 해당되는
    Journal Entries는 취득후 첫번째 감가상각 Proecss 에 의해 생성됩니다.
    Cost Ajustment의 분개는 그 Type에 따라 해당되는 분개 정보가 틀립니다.
    Amortized Adjustment
    =====================
    Asset Cost - DR
    Asset Clearing - CR
    Expensed adjustment
    ====================
    Asset (or CIP) Cost - DR
    Asset (or CIP) Clearing - CR
    Depreciation Expense - DR
    Depreciation Reserve - CR
    Reference Documents
    178659.1

  • Asset Cost not transferred from Asset Clearing to Asset Cost Account

    Hi,
    There has been a manual Asset-123 added for which the asset cost has not been transferred from the Asset Clearing to Asset Cost Account.
    While, the other additions done for other entities have been transferred successfully.
    Im trying to figure what could be the issue..
    Thanks in advance.
    Edited by: user645075 on Sep 1, 2008 12:27 PM

    Hi Shrutika
    It appears as is if there is some issue with the configuration of your GL / configuration of GL with AA. Please refer to the following [link|https://www.sdn.sap.com/irj/scn/wiki?path=/display/erpfi/asset+accounting]  on this site. This provides you excellent stuff on Asset Accounting.
    Regards
    Virendra Malik

  • Asset cost center assignment missing in purchase req or purchase order

    Has anyone else ever encountered this? 
    When we create a purchase requsition for assets, the cost assignment is determined from the existing asset. Most assets bring over the cost center into the account assignment. A few do not.  FMDERIVE shows the cost center populated when tracing. When you exit the derivation trace, the cost center is missing from the purchase requeistion or purchase order line item.  Any ideas? 
    PS: THis happens whether or not the asset has an entered serial number.
    Any thoughts of what to check are appreciated.
    Bob

    No, our FMDERIVE defaults Funds Center from Cost Center, which IS occurring, and, as stated above, the cost center appears correctly as expected on the FMDERIVE trace screen.. 
    Added info: In our test system we have reconfigured the ME51N entry screen to allow manual input of the cost center.  It is STILL automagically cleared during the save/validation process.
    Thanks for your question!
    Bob

  • Vendor - asset - cost center wise report

    Hi Friends.
    Good morning,
    Please let me know vendor,asset  and cost center wise report ( ie for all vendors at a time.)
    Regards
    Srini

    Hi,
    From T.Code: AR02 you will derive your expected report.
    for vendor select dynamic selection and select ORIGN DATA Tab here you will get vendor field.
    Regards
    Viswa

  • Asset cost transfer.

    Hi,
    I wanted to reclassify certain amount from 188000 (goodwill a/c) to 189000 (Intangible asset a/c) in company 5000. We donu2019t want to set up the depreciation(Dep. should not be calculated) u2013 only want to add value to account 189000. How can we do it?
    It wonu2019t work in FB50 because 189000 is asset recon account.  is there any other transaction code is there to transfer the cost from goodwill account to intangible asset a/c(recon a/c).
    Please advised
    Regards,
    Sam
    Moderator: Please, avoid asking basic questions

    Hi....
    Use T.code ABUMN with in same company code
    like from tangible asset 1234 company code ABCD to Goodwill asset 5678 company code ABCD
    Use T.code ABT1N with different company codes
    Like from tangible asset 1234 company code ABCD to Goodwill asset 5678 company code EFGH
    I hope you will get some idea...
    Regards
    vamsi

  • Asset Cost Center

    We have change the cost center for a particular asset and now when you go to post it does not show up in our depreciation list.
    Can anyone help, please.
    Thank you

    Hi,
    look here:
    1)<a href="http://help.sap.com/saphelp_47x200/helpdata/en/4f/71ec66448011d189f00000e81ddfac/frameset.htm">Changing Time-Dependent Data</a>
    2) iy you only want to look this values goto table anlz with tcode se16
    A.

  • Change is asset cost

    Hi
    I have one scenario for asset procurement.
    On 1st April 2008, i acquired a plant and machinery for Rs. 1crore. Depreciation was charged at 10% for two years.
    On 1st October (after 2.5 years) i received government subsidy of Rs.20 Lacs and this subsidy needs to be adjusted w.e.f from 1st April 2008. Hence i should be able to reduce my acquisition cost and retrospective depreciation should be posted.
    How to deal this scenario.

    ABGF is allowing decrease in value.
    But in my case, asset was procured on 2008 and subsidy is received in next year (say 2010). So when i try to enter asset value date as of year 2008, its not allowing me to post the transaction since i need to enter asset value date of current year.
    So putting asset value date of current year will solve the purpose of retrospective effect?. It means earlier year's excess depreciation is not reversed in current year.
    For ex,
    Cost on 01.04.2010 - Rs. 1 Lac. Depn chaged @ 2.5 % = Rs.2500
    Now on 01.05.2011 - Subsidy Rs. 50000 which i posted with asset value date as 01.04.2011 (since earlier year asset value date not allowed).
    So current year's depreciation of Rs. 1250 was perfect on Rs. 50000 (i.e. after subsidy). But the excess depreciation which was charged in year 2010 is not reversed. So total of depreciation for two years is Rs. 3750 (Rs.2500 + 1250). But it should be Rs. 2500 (Rs.1250 + Rs.1250).

  • Transfer asset costs from source lines

    We manually add costs to our assets. I have an asset that should have been entered as three assets, and I want to split the cost among the three assets. There's no cost in the "Line Amount" field on the Source Lines screen -- the field is greyed out. Is there a way to get a cost onto that line so that I can transfer a portion of it, or is this option not available for manually added assets?

    Hi,
    that may varies from system to system, it depends on the requirement also...
    and also the load running slowly depends on different factors like the volume of the load, records in it, no of daily loads running at that time,no of work processes in the system...etc....
    rgds,

  • CIP and Interfaced CIP Asset Cost

    Hi,
    Just came across this thing, when doing the capital project. I could see two columns CIP and Interfaced CIP. can anyone kindly tell me whats the difference between those.
    I could see the value which is lying in the CIP column, but the same is not in the Interface CIP column. when after running the program of "generate asset lines" also its not generated lines. what is the thing needs to be done to get generate the line and to change the value from CIP to Interfaced CIP. I could guess, by running the Interface Program, the value will get transfer from CIP to Interfaced CIP. but, when I run the Generate Program, no lines output.
    Thanks,
    Lavanya

    Hi Lavanya,
    Below are the points you may have to check:
    1. Check all the costs have been cost distributed( You need to run the appropriate cost distribution process
    labor, expense, miscellaneous etc depending upon your expenditure type).
    2. Check the project type for the project. In the capitalization information, alternate region it indicates
    whether raw or burden costs are being capitalized. If burden costs are used, then nothing will get picked up
    unless Distribute total Burden costs has been run.
    3. Make sure that the assets have an in-service date and that the report parameter Date Placed In Service
    Through includes this date.
    4. Check the PA Date Through parameter used. Note that this must be at least the last day of the period
    which includes the PA Date of the cost distribution lines of the expenditure.
    If this date is not the last day of a period, the process will select the first date which is a last day of a period
    prior to the date entered.
    Lets say your PA periods are like below:
    JAN-09 01-JAN-09 to 31-JAN-09
    FEB-09 01-FEB-09 to 28-FEB-09
    If you have CDL's with a PA date of 15-FEB-09, and you enter a PA date through 25-FEB-09, these CDL's will not be picked up because the process will not actually use the date 25-FEB-09, but rather the first period ending date prior to that date, or 31-JAN-09.
    5. Check the project status. In Setup-Projects-Status, make sure that the project's current status has the
    Capitalize Assets action allowed.
    For more info, visit:
    http://projectsaccounting.com/oracle-projects-fixed-assets/oracle-projects-fixed-assets-integration.html
    Hope this helps!
    Sathish Raju
    www.projectsaccounting.com

  • Difference between Asset Cost and Sum of Cost of Source Lines

    Dear Members,
    I have an asset for which the cost is shown as 1,672.696 at header level in Source Lines window.
    But when I summed up the cost of the source lines of the same asset it is coming as 3345.392 (which is double of the amount shown at the header level).
    Can any one please tell me why there is a difference.
    Steps I Followed:
    The navigation I followed is as follows:
    FA Super User-->Asset Workbench.
    In the find screen I have entered the asset number and clicked on Find button.
    Once I clicked on the Find button ,I can see the 'Assets' scrren on which I clicked on the 'Source Lines' button.
    Now Iam in Sourcelines window and here I can see the difference.
    Thanks in advance.
    Regards,
    Arun Reddy.

    Dear Members,
    I have an asset for which the cost is shown as 1,672.696 at header level in Source Lines window.
    But when I summed up the cost of the source lines of the same asset it is coming as 3345.392 (which is double of the amount shown at the header level).
    Can any one please tell me why there is a difference.
    Steps I Followed:
    The navigation I followed is as follows:
    FA Super User-->Asset Workbench.
    In the find screen I have entered the asset number and clicked on Find button.
    Once I clicked on the Find button ,I can see the 'Assets' scrren on which I clicked on the 'Source Lines' button.
    Now Iam in Sourcelines window and here I can see the difference.
    Thanks in advance.
    Regards,
    Arun Reddy.

  • Group Asset - Cost Center

    Hi Gurus,
    Please tell me what will be the impact if i assign different cost centers in Group Asset and Normal Asset???
    Should i assign cost center in Group Asset or not???
    Please revert asap.
    Thank You

    You can assign cost centers in group asset and it will flow to individual assets. You can change that cost center in indfividual asset.
    Alternatively you can assign cost center to individual assets.
    Please revert for queries
    Assign points if useful
    Rgds,
    Harmees

  • Asset & Cost Center linkage

    Dear All,
    If i select asset number in equipment master,I need cost center as default form asset.
    If any settings required ,ple let me know.

    [Duplicate thread|Asset number & Cost center linkage;
    ... this one now locked

Maybe you are looking for