Asset explorer- Asset not posted to APC transactions

Hello,
In AW01, asset explorer screen, in the planned values display tab , an asset has directly been posted from MM as goods issue.
However the Amount say Rs.10000 and its ordinary depreciation say 500 is not getting added to the APC transactions in the above tab of plannned values book depreciation.
So the APC transactions amount say 50000 and its corresponding planned depr say 2000 is excluding the previous mentioned asset values capitalised (Rs.10000 and Rs.500)
As a result the related asset reporting shows incorrect asset balances.
I would like to know why the asset already capitalised does not get reflected in the total value of the APC transactions ?
Pls help.
Regards.

Hi,
are you sure that the asset was posted from MM as goods issue? Not goods receipt from PO? Did you make the asset, or did you buy the asset?
OK, if you bought the asset, here is a suggestion you might want to look into.
Have the invoice verification been done to the PO? Usually, the APC value will be posted when there is a posting to the FI for the asset. And the ordinary depreciation will not be posted automatically. For Rs 500 depreciation, you need to do write-ups to adjust your asset balance.
Hope this helps.

Similar Messages

Condition type in PO not posting to desired transaction key.

Dear experts,
I was wondering whether someone could help me with the following:
I have defined a condition type for which specific additive costs for a purchased finished good should be added. The material is valued at standard price with the specifics that prior to the price calculation via transaction CK74N, additive costs are calculate and then added when executing CK11N that is composed of the price of the purchased finished good and the additive costs. We have created a condition type to break down the additive costs in the one hand and the material cost on the other. We want to have these costs to be posted against a specific cost account. We have created a transaction (via OBYC) for that and added it to the calculation schema. However, when posting the Goods Receipt, the additive costs (difference between the standard price and material price in the PO) are not posted to the desired transaction/GL account but to the price difference account (transaction PRD).
Could anyone please provide me with the customizing steps I should follow to succeed in the flow we want to implement? Can this desired outcome be done via standard or should any User Exit or programming be done to get the expected results?
Thanks in advance and regards,
David.

hi
Standard SAP Post the difference only with PRD account.

Condition type in PO not posting to desired transaction

Dear experts,
I was wondering whether someone could help me with the following:
I have defined a condition type for which specific additive costs for a purchased finished good should be added. The material is valued at standard price with the specifics that prior to the price calculation via transaction CK74N, additive costs are calculate and then added when executing CK11N that is composed of the price of the purchased finished good and the additive costs.
Next, we have created a condition type to break down the additive costs in the one hand and the material cost on the other. We want to have these costs to be posted against a specific cost account. We have created a transaction (via OBYC) for that and added it to the calculation schema. However, when posting the Goods Receipt, the additive costs (difference between the standard price and material price in the PO) are not posted to the desired transaction/GL account but to the price difference account (transaction PRD).
Could anyone please provide me with the customizing steps I should follow to succeed in the flow we want to implement?
Thanks in advance for your kind support.
Eric

Hi again,
Do you know what steps we should take in order to modify the standard functionality to have the part of the standard cost asigned to the condition type post to its transaction and not to the standard PRD transaction?
Thanks and Regards,
Eric

Documnt not posted when executed transaction FBWD

rHi,
When I execute FBWD transaction for returned BoE, I am getting a msg as "Document Posted" and another msg as "1 item selected in addition".
But actually, there is no dcument is getting posted. Please let me know if anyone faced this scenario and how to overcome this. There is no batch session also getting created.
Even for other company code, where batch session created, when I run that batch from SM35, it is finishing posting the document showing with all screens, but finally no document getting generated and the same msg apearing in that batch session log as well "1 item selected in addition".
Regards
Suresh

Hi,
The IDOC is successfully coming from XI, but there is problem in R\3 end.
Idoc status is 51 with "Application document not posted"
This indicates that the logic for posting the application document is not coded properly in inbound function module. Verify the logic once again.
Also you need to confirm that the data related or in application configuration is right. If the data values are not correct the above error get generated.
refer blow link for the program
http://help.sap.com/saphelp_nw04/helpdata/en/78/21760251ce11d189570000e829fbbd/frameset.htm
Thanks
Swarup
Edited by: Swarup Sawant on Jan 28, 2008 11:13 AM

Asset Explorer -- Acquisition Value Year-End

Dear all,
I'm looking on how to fetch a certain value...
If you access transaction AS03 You'll see th master data for a certain asset.
Now... if you click on the "Asset value"-button, you'll be redirected to transaction AW01N, "Asset Explorer".
In the asset explorer (under the "Posted values"-tab) there is a table. This table contains a row "Acquisition value" and a column "Year-End".
My question is, how to get this value (which table.field and/or which Function module)?
It looks like this (png screenshot)
[Screenshot(png)|http://www.kaneka.be/images/AssetExplorer.png]
Many, many thanks in advance.
Kind reagards.
Edited by: Guy Vleugels on Jul 28, 2008 11:34 AM
Edited by: Guy Vleugels on Jul 28, 2008 11:36 AM

Dear Kiran,
Thanks for the advice on the BAPI function.
It seems it doesn't contain this value.
Thank you.
Dear Gautham,
Is this ANLCV a structure-table?
I cannot browse this table with the data-browser [SE16].
Can I only browse/fetch data from this table through creating a new function module, or is there an easier way?
Many thanks in advance.
Kind regards.

Unplanned depreciation in FI Fixed Assets does not post to FI-GL

We used transaction ABAA (unplanned depreciation) movement typ 640 to post a depreciation amount - The document has been posted in the AA module ( it is now showing against the Asset in the transaction Asset Explorer transactions AW01N and AB03) however we do not manage to get it posted to FI and consequently have a reconciliation difference between the value in the AA module and the FI-GL.
Can anybody please give advise how we can correct this?
We tried following so far:
(1) post the unplanned depreciation document using transaction AFAB - depreciation posting run.
No documents created.
The message log displays "You want to run the next planned run of the depreciation posting run in period 014. However, the last planned posting run was already performed for period 014."
Than tried to execute the transaction with selection 'repeat' , 'restart', 'unplanned depreciation run': no documents posted either ......
(2) reverse the unplanned depreciation document using transaction AB08
This failed; the system reports following
"No FI document was generated for the asset transaction" and subsequently after clicking the 'post'button' an error"No unique header information transferred into Accounting
Message no. RW001
Diagnosis: The interface into Accounting requires:
Header data
Item data
Currency data
The header data is missing, or several items were transferred.
System Response
Processing of the data in the Accounting interface is not possible.
Procedure
This is a system error of the application which was called up
So..............No idea how to get rid of this document.
Can anybody help?
Kind Regards,
Arjan

Hi Suresh,
Thanks for you feedback.
I had already tried your suggestion; it was the actions which I mentioned under the point (1) in my message.
The system did not generate any FI document, this is exactly the unexpected problem that I am trying to solve.
Any further suggestions?
Kind Regards,
Arjan

System does not reset asset retirement date for Depreciation Area specific transaction after area has been deleted

Good day,
I needed to create a new depreciation area in a live system. The depreciation area would not post to the GL, but would be used for tax purposes in a currency other than the local currency. When creating this area the asset values were translated at the system exchange rate which did not agree with the values of the manually maintained tax register. I proceeded by creating new transaction types that would only post to the new area, one of which was an asset disposal transaction, which would be used for downward adjustment of the APC value. I made my adjustments at the end of the previous financial year, but had to start over and proceeded to delete the depreciation area to allow me to start over.
After reinstating the depreciation area, my original adjustments were removed, however the assets which APC values needed to be adjusted downward using the disposal transaction, was giving me the AA 478 Posting transaction is not possible (value date not allowed) error.
I've reviewed the asset postings and there is no record of my original adjustment documents. The problem seems to be that field ANLA-ABGDT (Last Retirement Date), is still indicating the date of my previous adjustments and that this was not updated when the Depreciation Area was deleted and reinstated.
Again, I do not have any documents which I can access or reverse to update this table. Is there any way to clear this field without reversing the disposal document?
I'm also looking at implementing SAP note 1618286, to make error message AA478 a warning. I could not implement SAP note 533378 since it only supports component version 46c and we are currently running component verson 605.
I would appreciate your consideration of my problem.
Regards
Marius

If you are in Test System, you can use function module AA_AFABER_DELETE to totally delete the depreciation area (tcode SE37, specify chart of depreciation and depreciation area), After that recreate your depreciation area and run AFBN. But before you do that, have you created a retirement transaction type that limits the posting on your new depreciation area? If not create one.
Hope this helps.
Thanks!
Jhero

Fixed asset Write up Error. ABZU(Parallel depreciation area 32 is not poste

Hi Sap Gurus,
      I am running into an error when trying to post a write up via "ABZU". Here is the error message "Parallel depreciation area 32 is not posted". Message no. AA565.
Diagnosis
The asset to be posted does not manage parallel depreciation area 32, or transaction type that you are using is limited to certain depreciation areas, and does not contain depreciation area 32. This is incorrect.
System Response
Posting is rejected.
Procedure
Check the asset and the transaction type.
I tried "Limit Transaction Types to Depreciation Areas" in t-code:OAXE for derpeciation area 01 and 32 but still i am getting the same error. I am using ttype:700. When i look into derpeciation tab in asset master record i have depreciation area 32 is there. Is there any configuration piece i am missing. We are using area 32 as IFRS in group which is copy of 01.
Any help will be appreciate.
Thanks and Regards,
Babu

Hi,
There are the following reasons:
1) The wrong transaction type is being used. Please verify that you are using transaction type in the 700 series for your write-up.
2) The transaction type is restricted to certain depreciation areas.   In transaction OAXE the transaction type can be restricted to post only to certain areas. If the asset manages a parallel area you have to extend the posting to include the parallel area.
3) The asset was created before you introduced parallel currencies and does not manage the parallel area. In this case, the parallel area must be created on the asset or the values need to be transferred to a new asset that manages the parallel area.
4) Transacion types 600 and 601 can only be used for assets that have a calculation key in their depreciation area that allows no automatic calculation (for example depr key MANU). The unplanned transaction types however can be used with assets that allow automatic calculation.
You also need to verify that there are entries in Table ANLB for the asset in question for the depreciation area.
5) Your company code uses parallel currencies (currency types 10-co.code currency, 50-Index based currency, 30-Group currency...for example). The assets created in this company code must have the depreciation areas for parallel currencies active. You can only do this in activating the depreciation areas with parallel currencies for all the asset classes used in this company code.
Check transaction OAYZ to make sure the areas are activated for all asset classes in the co.code. If not, you will need to       activate these areas and ensure the asset has all areas assigned.
regards Bernhard

FA-retirement-Asset value date and posting date are not in same fisc year

Hello,
I would like to post retirement in the new fiscal year but with asset value date in the previous year so that NBV is calculated correctly. It is not possible neither in ABAON nor in ABAVN with any transaction type.
I always get message 'Asset value date and posting date are not in same fiscal year'.
Is there any way how to handle this?
Thank you,
Jan

Hi,
I have tried this but the settings of our Depr keys works in the way. That if you use asset value date in the new month it will calculate depreciation for the whole month.
This means if I retire with asset value date 31.12.2008 - NBV will be calculated as at 31.12.2008.
If I retire with asset value date 1.1.2008 - NBV will be calculated as at 31.1.2009.
Thank you anyway!

Asset value date and posting date are not in same fiscal year

Hi,
Our business user has created an asset under an incorrect asset class, which he is trying to transfer to a new asset whcih was created under correct asset class. However system is restricting user with the error message "Asset value date and posting date are not in same fiscal year". Can you please advise me how we can proceed further with this error.
Regards,
Asam.

Hi,
To transfer one asset to another asset within a company code can be done through ABUMN only.
While doing this transfer you have enter the document date, posting date, and value date for the transaction, but all these dates should be in same fiscal year only.
In your case you must have been entered the dates for asset value date and posting date , and these two dates are in diff financial years.
Please make sure that both the dates are in same FY.
Hope this will fix your issue.
Thanks,
Srinu

Interface   BAPI can not post to asset

Dear all
        i met a weird problem.
        we use a interface( bapi) to make the SAP document, but when we post document for the asset ,
only FI document generated. the Asset document not generated , the value was not posted to the asset.
        if anybody has met this kind of problem?   help .......help.......Thanks a lot !

Dear
      yes ,we have fill in the transaction type (100 - acquisiton) , and the FI document has been generated
all the fields are right ! the only problem is the asset value not updated ,it's that the asset document not generated!
and it 's not for a particular company code ,for all the company code!
Best Regards!:)
Sara xie

Parallel depreciation area 04 is not posted.(Assets)

Hi All,
I have found below mentioned error at the time of Advance knocking off.(F-54)
Parallel depreciation area 04 is not posted.
I have found below mentioned error at the time of Advance knocking off.
The error message number :AA565
The Asset to be posted does not manage parallel depreciation area 04,or transaction type that you are using is limited to certain depreciation areas and does not contain depreciation area 04. This is incorrect.
Please help out for this issue.
Thanks and Regards,
Ram

Hi Ram
With regards to the issue, if you have activated the use of parallel currencies, all assets created in this company code must have the depreciation areas for parallel currencies active. You can only do this by activating the depreciation areas with parallel currencies for all the asset classes used in this company code. Check transaction OAYZ to make sure the areas are activated for all asset classes in the co.code . If not, you will need to activate these areas and ensure the asset has
all areas assigned.
Another reason why the error message appeared could be the asset was created before you introduced parallel currencies and does not manage the parallel area. In this case, the parallel area must be created on the asset or the values need to be transferred to new asset that manages the parallel area.
I hope this information helps.
Best regards
George

Accumulated depreciation is not posted at the time of sale of asset with r

hi
all
i have created a asset with acquisition date 1.4.2011. i have posted the acquisition value as 20000 inr.
i have executed the depreciation run in AFAB t.code for april2011, may 2011,.. the depreciation is posted. in august i am retiring the asset with revenue in f-92. at this time the accumulated depreciation is not debited . the system is taking the difference between the acquisition value and sale proceeds to loss on sale of asset directly.
pls suggest me what is to be done
thanx in advance

yes, i have assigned the GL account for the accumulated depreciation on the asset in AO90. when i execute the depreciation run the system is posting the entry
depreciation a/c dr
to accumulated depreciation on asset a/c
but at the time of retiring the asset it is not debiting the accumulated depreciation on asset a/c.
any how thanx for Ur reply

Asset Fiscal Year End Closing - Depreciation not posted completely in 2010

Hi Experts,
I have an issue concerning AA 2010 year end closing, since there is one asset which depreciation in 2010 was not posted completely, meaning that we cannot close 2010 fiscal year.
This happened because of the following situation:
Vendor Incoice was posted in 30.12.2010, with a document date 31.03.2010 (meaning that for this asset the depreciation calculation start date was 01.03.2010). Then, in 30.03.2011 someone post the reversal document, with posting date 31.12.2010.
So for this asset I donu2019t have any depreciation posted in 2011 and no values in depreciation book, for the asset, meaning that even if I change the depreciation calculation start date for 01.01.2011, it will still be necessary to run depreciation in Dec.2010.
However I cannot run depreciation for this asset for 2010 because it will have impact in 2010 balance sheet, which cannot happen.
Do you have any ideas to solve this problem?
Thanks!
Best regards,
Andreia Nascimento

Hi,
As i have already suggested you for the [SIMILAR THREAD|Re: Asset Fiscal Year Closing not possible], which you have only posted in FI forum, there is no other alternative than running the repeat dep run for FY 2010 for period 12.
Please do not cross post your questions.
REgards,
Srinu

Asset Not Posting In the GL @ Asset Retirement

Hello All,
Our client is facing a problem which is as below.
We have done retirement of an asset the steps done are follows.
1. ABAON - Sale with revenue with out customer.
The GL are updated with respect to depreciation area 01 , book dpreciation.
2.ASKB , periodic processing for the updation of depriciation area 02 - tax dpreciation.
Only the clearing account is getting updated.
The loss on sale of asset & revenue from the sale of asset GL are not updated in this case.
I have checked the configuration in AO90 and GL are perfectly assigned correctly for both the depreciation areas 01 & 02
Can any one help me in finding why its not getting posted.
Is there any steps missing in the process.
Also note depreciation posting for 01 is real time and 02 its manual yearly one. But there is some depreciation posted in earlier year so there is actual loss on sale of asset
Thanks In Advance
Arun

Hi,
My problem is last year it posted correctly , is there any relation between the posting of depreciation in Tax depreciation Area 02 at the 12th period and this error.
Should we clear the clearing accout to post into the GL
Thanks in advance
Arun R

Asset explorer- Asset not posted to APC transactions

Similar Messages

Maybe you are looking for