Asset, internal order and company code problem (AA982)

HI
Is it possibly on fixed asset that belongs to company code 1 to assign internal order (actual) for depreciation, that belongs to company code 2. We receive error (AA982); Company code for order is not company code for asset.
SAP note 431367 says no.
Eny proposals.
Thank you for help.

hi
you should not assign the same company code.

Similar Messages

Profit center and company code field in Internal order type (KOT2)

Dear Experts,
I want to bydefault profit center and company code in ordertype customization.
Profit center and company code field in Internal order type (KOT2)
regards
RR

Hi
1. Create a Model Order in KOM1
Enter the Comp Code and PC and other fields you want and save it
2. Enter this Model order in your Internal Order Type in KOT2... Transport this change to production client
3. Next time when you create an IO, PC and CC will be populated by default
br, Ajay M

Error Asset 0 not in company code during creation of service puchase order

Dear All,
I am getting the following error while creating service order in ME21N. My account assignment category "P" and Item category "D".
The error message is "Asset 0 not in company code"
Kindly give your suggestions to solve this problem.
Thanks and Regards,
Manivel.S

HI,
as per me if you are using P then you have to give WBS element in PO
P nothing but direct consumption for project stock
Regards
Kailas Ugale

Company code problem in Controlling area Tcodes

Hi All,
We are following role based authorisation for creating roles for FI/CO module and we are seggregating roles as per the company codes.We are assigning Tcodes like KO01,KO02,KO03(Internal order) and KS01,KS02,KS03(cost center) which are connected with Controlling area in one role.We have 5 company codes and we are trying to create 5 roles with the above Tcodes for 5 different company codes.
The problem we encountered is when we entered the Tcodes in the role, and we get to the 'Change authrisation data' option in the 'Authorisation' tab in PFCG, the system is not prompting for the Company code organisational level. Hence in this case, a user will be able to access the above mentined Tcodes for all the company codes. But we need to create a role in such a way that a user who is assigned this role is only able to access Tcode like KO01,02,03 etc for his company code only and should not be authorized to access these Tcodes for remaining 4 company codes.
Can anybody please help me with a way to restrict these Tcodes to a particular company code in our scenario.
Thanks and Regards,
Abdul Khyoom A.

Hi Ashok,
Thanks for the response.
Here in my case, when I insert the Tcodes related to conrolling like(KO01,KO02,KO03 etc) in a role, then I dont find any authorization objects(bukrs) which is related to the company code in the authorization genaration area in PFCG. So there is no way I can maintain values in them.
Please suggest any alternate solution.
Thanks and Regards,
Abdul Khyoom A

How to get internal order and activity type other than from BSEG

We want the Internal order and activity type fields. From BSEG, it is taking a long time, and it hangs.
Is there any other table we can get these values from?
Our query is this:
select bukrs "Company code
gjahr "Fiscal year
belnr "Document no.
buzei "Document Item no.
aufnr "Internal order
lstar "Activity type
from bseg
into table gt_add_info
for all entries in gt_gl_detail
where bukrs = gt_gl_detail-rbukrs"Comcode from G/L acct detail
and buzei = gt_gl_detail-buzei "Doc item no. from G/L acct detail
and belnr = gt_gl_detail-belnr "Doc no. G/L acct detail
and gjahr = gt_gl_detail-gjahr."Fiscal yea
Can advise please how to make it faster. My internal table (GT_GL_DETAIL) has over 100000 records. ? thanks.

I did a SQL trace, and saw that tables CSLA, CSSL, COKL and COKA are being hit with the values I entered inthe Activity type in transaction FB50.
Still not clear but where it gets stored. If in any of these tables, how do I get the object key?

Internal order and g/l number trying to give in miro screen

hi experts
i am facing a problem in miro screen. i want to change the internal order and g/l a/c in miro screen. is it possible to change in miro?as i know this internal order and g/l a/c is generally given at the time of po and grn. but my cleint want to change it in miro screen if requeired. can you please suggest me whethere it is possible or not. if possible then how can i configure it?
thanks and regards
rishi
Moderator: Yes, it's configurable (OME9). Please, search SDN properly and post in the right forum. This questions relates to MM

hi
not possible in std configuration chek with user exit
MBCF0002 ( EXIT_SAPMM07M_001 ).
got the below patch from net try it
->However you cannot directly chnage as MSEG is available as importing parameter and whatever you change here will ->have no impact on main prog. Instead you can use following code -
->
->FIELD-SYMBOLS <F2> TYPE ANY,"Field Symbol for the GL ACCOUNT
->
->DATA : W_KONTO_NAME(50) VALUE '(SAPMM07M)DM07M-KONTO'.
->
->ASSIGN (W_KONTO_NAME) TO <F2>.
->MOVE "GLACCOUNT" TO <F2>.
->
->"GLACCOUNT" is the new GL account you want to change.
->
->or try field exit:
->
->report RSMODPRF
regards
kunal

Partial Asset data transfer at company code level

Hi all,
We are planning to go live on december 1st, 2007. My client wants to hold a portion of fixed assets relating on one company code and want to convert them after couple of months.
I think I will go with the current conversions and leave the division for which they want to hold, and to keep the company code in test mode. Planning to use the same conversion program designed for that particular division after go-live.
And the GL balances for that particular division will be in non-recon account to ensure that there will not be any inconsistency between GL-FI
Before second load after making correct entries, to convert the non recon account to recon and
Please advice me, about this situation any impacts.
Thanks
Krishna

Never mind. We managed somehow to figure it out ourselves.

Purchase Order - Default Company Code depending on Purchasing Org in Me21n

Hi Gurus,
I have requiremnet to default Company code to a value depending on Purchasing Organisation in Purchase Order Create/Change Transaction ME21n , ME22n.,( Also -ME31K, ME32K )
Purchasing Org and Company code can be seen in Me21n -> Header -> Org . Data Tab
Please let me know the user exit or Badi to do the same. If no what is the solution .
Regards
Avi

Hello AVI,
U can use the BADI ME_PROCESS_PO_CUST.
In that there is one method Process_header.
From there u can do all the things that u need in the header part of the Purchase Order.
I think the Below User Exit can also be used :
MM06E004.
With Regards,
Sumodh.P

Bapi_Acc_Document_Post - E 018 : Invalid tax code and company code combination

Hi All,
I need the help of this forum once again.
I am using bapi Bapi_Acc_Document_Post to create KR documents in SAP. The bapi works absolutely fine except for one scenario:
For a particular type of invoice coded to Company "XXXX" with lines having tax code "I0", the bapi returns error message "E 018 : Invalid tax code and company code combination". The tax code "I0" and the company code "XXXX" has been mapped in SAP and if I try to create the invoice manually in SAP using the GUI, the invoice gets created without any issue.
I have tried searching the forum but could not find any post on this topic.
Therefore, requesting the masters to please help me out on this.
Best Regards
Sutirtha Roy

Hi Gowthami,
how have you solved your problem, because I am facing the similiar issue and trying desperately to post the following combination with BAPI_ACC_POST_DOCUMENT:
001 40       490100     Aufw. aus Marge PP              R2                 15,92
002 31       10000003   Kreditor                                R2                 15,92-
003 50       175060     Abzugsverfahren USt            R2                  3,18-
004 40       154060     Abzugsverfahren Vst             R2                  3,18
THANX!
Regards
Marko

Internal order and Budget fixing

Hi,
The budget is allocated for year 200t against internal order in T code KO22. But while i am tring to create an asset PO its showing error that Budget exceeded in Fiscal year 2008.
I think i need to fix budget for 2008. In KO22, in GOTO the Next fiscal year is in display mode.
Please let me know how to create the Budget for Next Fiscal year
Regards
John

You can change the Budget in tcode KO22, if you have authorization..
But you can add supplement through tcode KO24

How to get vendor and company code based on logistic invoice document

how to get vendor and company code based on logistic invoice document in abap/4?

Hello Kumar
When you call BAPI_INCOMINGINVOICE_GETDETAIL using
INVOICENUMBER = <number of invoice>
FISCALYEAR = <fiscal year>
the returned HEADERDATA contains what you are looking for:
HEADERDATA-COMP_CODE
HEADERDATA-DIFF_INF
Regards
Uwe

FROM WHICH TABLE I CAN FIND GL ACCOUNT NUMBER AND COMPANY CODE OF A PARTI

FROM WHICH TABLE I CAN FIND GL ACCOUNT NUMBER AND COMPANY CODE OF A PARTICULAR CUSTOMER?..I AM TRYING TO POST AN IDOC ..SO DATA HAS TO BE PROPER.JUST TELL THE SOLUTION

Hi rendeep,
1. LFB1
   this is the required table.
2. field is AKONT
3. The account number can be different
   for different companies.,
   hence it depnds upon combination of
   LIFNR
   BUKRS
regards,
amit m.

Database table/FM to find relation between plant and company code in SRM

Hi,
I have a requirement where I need to determine the relation between the plant and company code in SRM.
The plant and company code both belong to R/3. We are replicating the plant by using the report BBP_LOCATIONS_GET_ALL.
This plant is now available as a BP in SRM. But from which SRM table or using which SRM FM can I get the relation between this and the company code?
Thanks,
Srivatsan

Hi
<b>Check table BBP_LOCMAP. (Plants) - Manage Table Business Partner > System > Location
BBP_COMPCODE_FAV User-Specific Favorites for Permitted Company code.</b>
Hope this will help.
Please reward suitable points, incase it suits your requirements.
Regards
- Atul

Internal order and Cost center

hi guys
can anyone please explain me why do we have cost centers and internal orders?
If we can track cost to cost center then why do we need internal orders?
please give some detailed explanation.
thanks

when you are posting a document and if the g/l is created as a cost element then
you have to either assign a cost center, profit center, internal order etc
so when you are posting an expense and if its for that project you assign the
internal order and when the project is finished you can settle it to a cost center.
If we can assign both internal order and cost center i dont think so but not very
sure. Best way to learn these things i would recommend is try it in test system
that way you will understand better about the whole flow and it will stick in your
mind.
Regards,
Zaid

BAPI KPF6 POST PLAN COST FOR INTERNAL ORDER AND COST ELEMENT

Hi all gurus,
I would like to use in a custom report a BAPI/Function Module that help me to simulate KPF6 in order to post planning costs for internal order and cost element (layout 1-401).
So the input should be:
1) Version
2) period from
3) periodo to
4) year
5) internal order n.
6) cost element n.
7) value
I found a lot of BAPI but don't know the correct one and how to use it (example how to fill the input value).
Can anyone help me on that?
Kind Regards

In additio to the previous I found the BAPI_COSTACTPLN_POSTPRIMCOST but don't know if it's the correct one and how to use it (some example fitting the my case will be very appreciated).
If the quoted BAPI is correct.
I tested it filling all fields as following:
HEADERINFO:
CO_AREA=FFCA
FISC_YEAR=2008
PERIOD_FROM=001
PERIOD_TO=012
DOC_HDR_TX='blank'
INDEXSTRUCTURE:
OBJECT_INDEX=000001
VALUE_INDEX=000004 (hope this point at Interna Order)
ATTRIB_INDEX=000000
COOBJECT:
OBJECT_INDEX=000001
ORDERID=ZO53-08IMZ
TOTVALUE:
VALUE_INDEX=000004
COST_ELEM=3224048
FIX_VALUE= 200,0000
DIST_KEY_FIX_VAL=2
The Return table is set to 0. Nothing happens.....I suspect something related to indexstructure or index is wrong..
Could anyone help me on that?
Kind Regards

Asset, internal order and company code problem (AA982)

Similar Messages

Maybe you are looking for