Asset (Machine) Transfer with in Company code (Different Business area)

Dear all
Please provide us transaction code and document flow for inter plant transfer of assets t. All required entry of MM, PM, FI and excise should be covered in the document process. Inter u2013plant & inter-company assets transfer/sale is common in our Clinet and it needs to be streamlined by defining standard process.  
And please note that asset or any other material can only be cleared from one place to another by preparing excise invoice. It is also advised that FI entry must be posted before removal of goods from the plant. 
Please give complete procedure and transaction . Please suggest

Hi,
The TCodes for the Transfers are as follows:
ABUMN: For intra-company or Inter-plant transfers
ABT1N- For Inter-company transfers.
If you have only 1 company code,then there is no need of using the TCode ABT1N, You can use ABUMN.
Regarding the excise invoices,you can post the same once billing is done,by using TCode:J1IIN,but of course it will depend at which point your client would do the excise invoice.
Hope this is useful.

Similar Messages

  • Asset Transfer with two company codes

    Hi
    We have a requirement in which we need to transfer the asset from one company to another. However, there is VAT calulated on the transfer of asset from one company code to another. We need to create an invoice, calculate taxes and then transfer the asset.We do not have SD & MM  Module and we cannot create one company as a customer or vendor
    Regards
    Sanil Bhandari

    hi,
    If the country is same for both the CCs, then you must have been assigned the same COD also to your CCs.
    One thing i didnt understand is that, why this taxation is required while transfering an asset from one company code to another CC within the same country.
    Because the COD will be maintained at country level.
    And one more thing is that if both CCs were assingned to same company ID, then there would be no need of caluculating tax.
    This asset transfer cannot be treated as a new asset purchase in the receiving company code, since it is just a internal transfer within a group company.
    But still if you want to calculate tax, you have to manullay calculate the tax and need to post a JV.
    Please correct if i am wrong....
    Thanks,
    Srinu

  • Automatic creation of Company Code and Sales Area Data for Customer Master

    Hi,
    We have a organisation structure setup with multiple company codes and sales areas.
    A customer will be created using VD01 via the Sales Order VA01. Because the customers are created using VD01 we need to automatically extend the customer for the various company codes and sales areas. The data on these views will be populated using reference customers.
    Any recommendations on the best approach (technically) to auto extend the customer master would be appreciated.
    I'm reluctant to use BDC's because of performance. We are in a Retail environment.
    Thanks in advance
    Craig

    The sample code has been taken from the SAP notes - in which have the affected as outlined in the example.
    The codes does not do what my requirements are, which is to identify the next available number in isolation of the BP type.

  • Form-16 ,if employee get transfered with same company code.

    Hi Friends,
    If an employee get ransfered from one personnel subarea to other personnel subarea with same company code, can we get Form-16 seperately for two different periods.
    Thanks in advance.
    Appreciate any help and points will surely be rewarded.
    Thanks & Regards,
    Nanditha

    Hi,
    Pricing configuration for STO: -
    In SPRO > MM > Purchasing > Conditions > Define Price Determination Process > Define Schema Determination > Determine Schema for Stock Transport Orders > Here assign Calculation Schema "RM2000" i.e. Stock Transfer Document to Schema Grp Pur. Org, STO Type (For e.g. UB) and Supplying Plant.
    Calculation Schema "RM2000" has condition type P101 which will pick up the MAP of supplying plant automatically during creation of STO in ME21N ("Conditions" Tab).
    You can create new freight / delivery cost conditions in M/06 for Margin and assign in pricing procedure "RM2000" in M/08 and also assign the Accrual Key to this and do the Account Determination for this Accrual Key in OBYC
    At the time of PGI, following accounting entry will get generated;
    Stock A/c - Dr - 110 INR (Receiving Plant)
    Stock A/c - Cr - 100 INR (Supplying Plant)
    Margin Account - Cr - 10 INR (Supplying Plant)

  • SRM PO created with wrong company code

    Hello,
            The users have created several PO in SRM with wrong company code. The user was found in the wrong organization structure during the creation of shopping and approval. The PO did not get transfer to the Back because of this. Is there a way to modify the PO and change the company code.
       In case we want to modify it in the tables given that BBP_PD gives you an indication of which table and entry to modify, is there a way to do this operation (like SE16N in ECC)? Have you ever done this and what risk is their in such an operation.
    Thank you.

    Hi,
    I doubt anyone here will (or will dare) suggesting to you how to do it as it is against SAP practise totally. if the document is created wrongly, it should be deleted and approved with all the tracking and changes in place for auditing purposes.
    Frankly that is what you should practise as well.. my 2cents opinion.
    Regards.
    YS

  • Issue with Cross-Company code transactions and Extended Withholding tax

    Hi Gurus,
    I am having an issue with Cross-company code transaction while posting expense with 2 different company codes.
    In the 2 company codes, one company code is setup for Withholding tax and other was not set.
    While posting in FB50, I am getting the below message and system does not allow to post the invoice.
    Company codes have different settings for withholding tax treatment
    Message no. F5786
    Diagnosis
    You are entering a document containing at least one vendor or customer item and which has line items in several company codes. The extended withholding tax treatment has been set to active in one of these company codes, but not in one of the other company codes.
    System Response
    You cannot enter this kind of document.
    Procedure
    Enter the transaction in two documents.
    For this I tried to test the transaction by activating of extended Withholding tax for both the company codes. Then the invoice is posting correctly now.
    The point is if I activate extended withholding tax for the Company code which is not using the setup, will it face any issues in other areas? and also kindly advice whether is this a right way to set up to fix the current problem.
    Thanks for the Support and early response will be appreciated.
    JBC.

    Hi Mamta,
    Thanks for the Response. I think you misunderstood my scenario.
    For Eg in FB60 with Co code 5065:
    I am debiting the Expenses for Co Code 1000(Witholding tax not active) and crediting the Bank Account of Co Code 5065(Withholding tax setup is done for this co code). When I tried to post with these line items I have getting the error.
    Posting        GL                   Co Code
    Dr          106520(Exp)            1000
    Cr          202020(Bank)           5065
    For this I tried by activating the Withholding tax for Co code 1000 which is not active before and post it. The system allows me to post the invoice.
    I want to know whether is this a right way to solve this issue and will it impact on any other areas by only activating the Withholding tax for a Co code?
    Thanks,
    Bapu

  • Transfer costs between company codes

    Hi!
    we have requirement that the factory overhead costs ( example electricity cost) transfer from one company code to another company code?
    how can we do this?
    regs,
    ramesh

    Have you tried creating a distribution cycle using KSV1?  You can distribute costs from one cost center to others basing either on certain predetermined percentages or a variety of receiver tracing factors.  And you can activate real-time integration of CO with FI to ensure the CO distribution posting flows thru to FI.

  • Asset 50000 1 not in company code 1000

    Hello Friends,
    I'm able to create the assets, but afer creation of assets, when i'm going to see in display/Change mode system prompting the following message.
    Asset 50000 1 not in company code 1000
    Message no. AA001
    Diagnosis
    The asset number 50000 1 you entered, does not exist in company code 1000.
    System Response
    Processing cannot be continued.
    Procedure
    Correct your entry.
    It is also possible that this asset is defined as a group asset. In that case, it cannot be used as an asset.
    I'm able to see the asset when i press F4 button, but why system prompting this message i don't have clue.
    Please help me on this.
    Rgds
    Swapna Murali

    Hi Ravi,
    Controlling area and Company code details are proper. I have to check the SAP Notes which you have provided. What are the conditions to receive this message?
    I have created many assets before in the same company. Yesterday when i was using transaction AS03 to see one asset, system displayed the error message that particular asset was locked by me eventhough I was not doing anything with that Asset. So I used transaction SM12 to delete the lock entries. Later on I checked the transaction AS03 to see the asset, strangely system displaying the error message that particular asset is not availble in the Company code. I have created another asset aswell for testing, the same error message is continuing for this asset also. System is not displaying any error messagewhile creating the asset and displaying error message while display and change mode.
    Please advice me.
    Rgds
    Swapna

  • PO created with wrong Company code

    Hi Gurus,
    I have Plant XXXX assigned to Company code 1111 and
             Plant YYYY assigned to Company code 2222
    One of the user has created PO with Plant XXXX and company code wrong as 2222.
    (we have warning message setup & not error message. So, it allowed user to create PO with wrong Company code and save)
    GR & IR both are already posted. I find the accounting document of these GR/IR show correct company code as XXXX-1111 (mostly would have taken correctly based on plant XXXX).
    These are service POs (non stock).
    Now user wants to change the company code in PO to 1111.
    I checked...and system simply allow to change to company code to correct one i.e 1111. It does not give any message.
    Could any one give me some additional info.. if it is right to do so? I am not too convinced at this moment.
    I was suggesting user to reverse GR, IR, delete PO and create new PO. Is that right?
    Thanks n advance for your input.
    Best Regards,
    Mohan

    Dear Mohan,
    U can change the company code in PO as it will not have any impact since the GR and IR is completed.
    Accounts are hit based on the valution area(valuation grouping code).
    Since the PO is already closed u can go ahead the change the same.
    Regards,
    AM Vahanan

  • Vendor Master Creation through IDoc with Multiple Company Codes

    I am trying to create vendor masters sent from a 3rd party into SAP using CREMAS05 IDoc.  I have the requirement that the vendor should be created in each of 3 company codes and the vendor number is internally assigned in SAP.
    I create my IDoc with the general data E1LFA1M and multiple E1LFB1M & E1LFB5M Children.  When I post the IDoc using IDOC_INPUT_CREMAS which uses Call Transaction, the vendor gets created for the first company code, but the IDoc errors on the vendor extension XK01 for the next company code with the error: "Fill all required fields SAPMF02K 0111 ADDR1_DATA-NAME1". 
    In debugging through this, it appears that the vendor number that gets created in the first XK01 transaction does not get passed into the data for the second XK01 call and SAP tries to create a new vendor instead of extending the newly created one.
    If I force the value in during debug after the initial call transaction into the variable h_lifnr, it works fine (Vendor created with multiple company codes.
    Any help would be greatly appreciated.
    -Larry

    I cannot give you exact solution, but can guess why this is happening, below is what I believe.
    I think Synchronous update is not happening in call transaction, second transaction is getting processed before the first one is saved, debugging it works fine, because we give system enough time to save while processing.
    Generally in call transaction we have MODE, if we pass S - then synchronous update happens, in your case, you need to find the way to incorporate this.
    Hope it helps.
    Regards,
    Ravi Kishore.

  • Asset Claas Activate For particular Company code in Company

    Hi,
    Asset class is defined at client and how can we activate asset class for particular company code in group company how can assign the asset class for particularly one company code in group company
    Regards,
    Harish

    Asset class depends on chart of depreciation , so if you have created an asset class on lets say US chart of Depreciation, it will be available to all the companies that have US Chart of Depreciation assigned to them .
    Thanks

  • Stock transfer between two company code

    Hi experts !!!!!!
    Would like to have u r suggesations
    We have two company codes. (1000 and 3000)
    Company code 1000 has one Distribution Center (e.g.1100)
    And Company Code  3000 has Five Store (e.g. 3100, 3200,3300,3400,3500)
    please suggest how to transfer the article stock , (by using Stock transfer order)  from Company code 1000 Which has  Distribution Center (e.g.1100)
    TO 
    Company Code  3000 has  Store (e.g. 3100, )
    please tell detail in step by step
    thanks in advance

    Hi,
    Steps to be followed will be
    1) Define the shipping data for Sites
    2) Assign a delivery type and checking rule
    3) Assign a Purchasing document type for the Supplying site and Receiving site combination
    4) Assignment of movt type 643 and field selection for the same as per requirement.(OMJJ)
    5) Change filed controls for Vendors by vendor account group. Change the General data> Control to optional and Additional Purchasing data from site to Optional. (OMSG)
    6) Define the partner function in Vendor master data for supplying site. (XK02).
    Hope this helps.
    Regards,
    Vinod Kapote.

  • Stock transfer between one company code to another

    How to configure stock transfer between one company code to another.
    Please send me the step by step procedure ASAP.

    Hi
    check following steps
    1. Create Customer in Supplying Plant.
    2. Create Vendor in Receiving Plant (In Purchasing View, Menu-Extras-Add Purchasing Data)
    3. IMG-MM-Purchasing-PO-Setup STO-Define Shipping data for Plants (Assg Cust No in Receiving Plant)
    4. IMG-MM-Purchasing-PO-Setup STO-Assgn Doc Typ, One-Step Proc Und Del Tol
    5.IMG-Log.Execution-Shipping-Basic Shipp Func-Shipp Pt & Goods Recei Pt Det
    http://help.sap.com/saphelp_erp2005vp/helpdata/en/4d/4b9036dfe4b703e10000009b38f889/frameset.htm
    also give ur mail ID will send doc
    Vishal...
    reward if usefull

  • Cross company subcontrating in sap with same company code

    Dear Sir
    we have an scinario of cross company subcontrating in sap with same company code , take an example my plat is 1003 and another is 1019 with same company code, so is it possible to do subcontracting ? i will process doccoumntation like j1if01
    which i raise with vendor also.
    plz send me procedure
    regards''
    sumit

    Yes,you can do subcontracting between plants of same company code.
    You need to to treat respective plants as vendors.
    SAP process may be
    1. Create a subcon p.o (sending plant as vendor)
    2. Issue material using MB1B
    3. Raise challan using J1IF01 if it is excisable or else print material document(step-2) as delivery challan for reference.
    4. Receiving plant will raise sales order based on p.o
    5. GR material from issuing plant - MIGO
    6. Process material
    7. Do Delivery / PGI from receiving plant
    8. Do billing or proforma invoice
    9. Receive processed  material based on p.o
    10. Challan reconcillation(not needed if material is non excisable)
    11. Invoice for subcontracting work(optional)

  • Creating order with out Company code and plant - just for pricing -possible

    Hi gurus
    Just for creating sales order (let us say no delivery and no billing, client was not intrested in the initial setup) for just pricing thing, does we really need Company code and plant. with out that just with sales org setup(sale org+D.C) can I create an order to full fil the pricing scenario.
    Please I need help on this
    Thanks
    Kris

    hi kris,
            we cannot create a order with out company code and plant , due to the following reasons
          we do not require the company code to create the order , but we require the plant to create a material and use it in the sales order .and we require a company code to create a customer .
    the pricing procedure is determined depending upon the sales area(sales org+distribution channel +division).
    please reward the points if it is helpful
    Regards,
    Murali

Maybe you are looking for

  • Lock Timeouts and Heap Space Exhaustion

    I'm having some trouble figuring out the best way to handle resource constraints in my application. Generally speaking, the application works well after starting for about a day or so, but inevitably starts generating "Lock timeout" messages and even

  • RowValException  on Applicaiton module commit

    Hi Experts, I am have overwritten the Entity validation method as follows try { super.validateEntity(); } catch (Exception ex) {           ex.printStackTrace(); and i got an exception when i commit the application module and the exception was - RowVa

  • IMac won't switch to new user on logout

    I have an number of iMacs that are doing the same thing. When a user goes to logout, the iMacs will get to the default background and that is as far as they will go. They will not get to the login screen so that another user can login. Some of the co

  • Sales Area wise Invoice list type assignment

    Hi; I got a requirement where customer needs the Invoice list assignment to billing documents sales area wise. Like in one particular sales area one invoice list type to a billing doc but the same billing doc needs other invoice list type in other sa

  • Function to return a list of sub-class elements

    Hi all I'm trying to write a function using templates which takes a list and returns a sub list of a given type.something like shown below: static <E, T> List<E> get_specific_elements(Collection<T> elements) { //assumes E extends T           List<E>