Cross company subcontrating in sap with same company code

Dear Sir
we have an scinario of cross company subcontrating in sap with same company code , take an example my plat is 1003 and another is 1019 with same company code, so is it possible to do subcontracting ? i will process doccoumntation like j1if01
which i raise with vendor also.
plz send me procedure
regards''
sumit

Yes,you can do subcontracting between plants of same company code.
You need to to treat respective plants as vendors.
SAP process may be
1. Create a subcon p.o (sending plant as vendor)
2. Issue material using MB1B
3. Raise challan using J1IF01 if it is excisable or else print material document(step-2) as delivery challan for reference.
4. Receiving plant will raise sales order based on p.o
5. GR material from issuing plant - MIGO
6. Process material
7. Do Delivery / PGI from receiving plant
8. Do billing or proforma invoice
9. Receive processed material based on p.o
10. Challan reconcillation(not needed if material is non excisable)
11. Invoice for subcontracting work(optional)

Similar Messages

Issue with Cross-Company code transactions and Extended Withholding tax

Hi Gurus,
I am having an issue with Cross-company code transaction while posting expense with 2 different company codes.
In the 2 company codes, one company code is setup for Withholding tax and other was not set.
While posting in FB50, I am getting the below message and system does not allow to post the invoice.
Company codes have different settings for withholding tax treatment
Message no. F5786
Diagnosis
You are entering a document containing at least one vendor or customer item and which has line items in several company codes. The extended withholding tax treatment has been set to active in one of these company codes, but not in one of the other company codes.
System Response
You cannot enter this kind of document.
Procedure
Enter the transaction in two documents.
For this I tried to test the transaction by activating of extended Withholding tax for both the company codes. Then the invoice is posting correctly now.
The point is if I activate extended withholding tax for the Company code which is not using the setup, will it face any issues in other areas? and also kindly advice whether is this a right way to set up to fix the current problem.
Thanks for the Support and early response will be appreciated.
JBC.

Hi Mamta,
Thanks for the Response. I think you misunderstood my scenario.
For Eg in FB60 with Co code 5065:
I am debiting the Expenses for Co Code 1000(Witholding tax not active) and crediting the Bank Account of Co Code 5065(Withholding tax setup is done for this co code). When I tried to post with these line items I have getting the error.
Posting        GL                   Co Code
Dr          106520(Exp)            1000
Cr          202020(Bank)           5065
For this I tried by activating the Withholding tax for Co code 1000 which is not active before and post it. The system allows me to post the invoice.
I want to know whether is this a right way to solve this issue and will it impact on any other areas by only activating the Withholding tax for a Co code?
Thanks,
Bapu

Problem with STO-cross company code

hi,
I am configuring STO process for cross company code( plants in different company code). I have done all the config. When creating the PO i am entering the supplying plant, i am getting the error "Purchasing organisation xxxx is not responsible for Plant YYYY". Could some one pls. suggest what may be the problem?
Thanks & Regards,
Pathanjali Bhat

Hi Pathanjali,
For cross company STO, the prerequiste is.
1.0 You have to create a customer in SUPPLYING PLANT and assign to RECEIVING PLANT.
ex: for plant:3000, sales org:3000,dist. chanl:12, divn:00.
and assign to plant:1000 in spro sto setting.
( **maintain shipping notification**)
2.0 Create a vendor in receiving plant .
3.0 Here doc type:NB.
4.0 Maintain supl. plant rec. plnt. and doc type in spro.
5.0 Maintain del type: NLCC.
6.0 Maintain supplying plant in vendor master in purchasing tab>extras> add.purchasing details--> maintain supplying plant here.
Create a PO .
enter vendor which u have created.
ex u r procuring for plant 3000.
maintain pur org, cocode 3000, here ( I think u might have done a mistake here).
maintain plant 3000 in item details tab.
enter the matl. price and qty and check the status.
If every thing ok save.
Then
go to VL10B, maintain del. date (should be before than ur delivery date in PO)
press F8.
ur po line item comes.
select the line item press back ground button
one more line item wil comes.
select any line item, press log. u wil get new screen.
place a cursor on that and press doc details button,
system shows the delevery note. make a note of no. come to LT03.
maintain required fields, select back ground processing. and select 2 below that field( ie pick and post) and press enter.
system picks and post the doc.
now check in PO history. 641 mvt has taken or not?
if not do once again LT03.
Rewert back if any clarification.
Reward if useful.
regards
Viru

Value date cross company code postings

Dear all,
it is possible to influence the value date on a company code level via the transaction OB68. With this transaction you can state that the current date is used as the default value for the value date when entering line items.This works fine when posting a G/L posting within the same company code.
When entering a cross company code posting, the indicator in transaction OB68 is ignored and the document date is used to be proposed as default value for the value date.
Does anyone know which SAP parameters can influence the value date for cross company code postings ? If this is not standard SAP possible, does anyone already encountered this problem and, if so, how did one solve this issue ?
Many thanks,
Regards,
Kristof

thank you for the reply ... unfortunately I expected some Z-programmation

Creating Cross Company Code Vendors/Customers.

Hi All,
I'm trying to understand how to create cross company code Vendors and Customers. I've already established the link with configuring OBYA. What I'm not clear is on which company code I should be creating the vendor and customer.
We have two company codes, 2100 & 0980. CC 2100 has the central bank tha pays invoices for CC 0980. I have two issues.
1. What kind of configuration is needed to accept incoming payments into CC 2100 House banks and lockboxes?
2. For intercompany activity between 2100 & 0980 how are the vendor and customer master records set up? I know there needs to be a vendor on the customer master and a customer on the vendor master.
So for 0980 acting like a vendor for 2100 I'm assuming the vendor number for 0980 is set up as a 2100 vendor.
The same is true when acting as a customer. The difference being is that this vendor entered into a field on the customer master and the customer number is entered on a field in the vendor master.
I'm missing how the Vendor record, if created on Company Code 2100 gets linked to Company Code 0980.

For SAP to 'know' that a particular vendor / customer master records represents a specific company code, all these needs to be linked to the same 'company'.
Companies are maintained in T880 (IMG : enterprise structure -> definition -> Fin Acctg -> Define Company
Company code is linked to a company in the cocode config. IMG enterprise structure -> Assignment -> Fin Acctg -> Assign comp. code to company
And finally, the Trading Partner field in the Customer/vendor master is where you assign the company to the cust/vendor.
This setup will eventually allow you to consolidate interco A/R, A/P, etc.. if you need to but is not necessary for the interco process to post.(although you'd want to have it rght from the get go)

How to use Cross Company Code document number as Reffrence.

Hi
Actually user wants to post the same debit credit line items with Editing the amounts which he has posted last month
So i suggested him to use post refference of the previous month document number.
Since that is Cross company document number. There is no source to give in T.Code FBR2. There is a fecility to give only document number of a company code not cross company code.
Assume that there are 3 company's involved in that document.
company X --- 25 line items
company Y -- 75 line items
Company Z -- 100 line items
Since he given in header data X Co code it has generated the Cross company code document number 1000X 08 ( which means 1000 is doc.number X is company code 08 is year. This is sap standard cross company code doc number format)
and individual document number is
X - 1000
Y- 2000
Y- 3000
If he post with the reffrence of X company only 25 lines will come remaining 175 line he as to post manually.
If he take Y Doc number only 75 lines will come
If he take Z Doc number only 100 lines will come
To bring all lines there is no provision to give Cross company Doc number.
Please advice how to use cross company doc number as refference.
Tks
Shivaji

Hi guru
This is answered
Thanks
shivaji

Return scenerio for cross company code

Please suggest the steps needs to be peroformed if want to return the material from 1 company code -plant to other.
its for cross company code
I want to perform the steps with delivery document

Is it possible to use 1 step and 2 step return process with delivery for same plants of different company code.
By saying same plants i meant to say supplyin plant and recieveing plant with 2 step return delivery and also 1 step return delivery is it possible
Edited by: Sap: IN on Jan 12, 2011 1:28 PM

Cross-Company Code document and Taxes

Dear all,
I am posting a cross-company code document with the following characteristics:
Company A - debit A/R, credit revenue
Company B - credit A/P, debit expense account
The document is balanced within each company code, so the I-C clearing accounts are not posted to.
The problem is that we have taxes on both company codes but it seems (correct if I am wrong) that SAP only posts taxes to the first company code although the documentation says that in certain circumstances it takes the line item company code in order to post the tax. Unfortunately, it doesn't say "how" this is possible and neither gives additional information.
So, my questions are:
- Is it possible to enter a tax code for each company?
- considering that the local currencies of company A and B are not the same (one is in US, the other in Europe), is it true that the transfer tax program (RFBUST10) does not work?
Your suggestions in how to post taxes to both company codes are appreciated. Thanks.

Check BKPF-BVORG field. this cross company co ref will be same in both documents.

Is Personnel Number cross company code?

Hi,
Have a very fundermental question. Is Personnel number cross company codes? For example, if there are 2 company codes (A and B) in one SAP box and there is an employee in company code A who has the personnel number 900001. Can another employee in company code B has the same peronnel number 900001?
Thanks,
Ting

Hi,
It is not. You may not have two persons with same Personnel number, no matter if they are in differents Company Codes. There is just one Personnel number and it must be assigned to only one employee.
Regards,
Edoardo

Add freight cost in a cross company code scenario using a costing sheet

Dear Forum,
I will like to add freight cost to a material using a costing sheet. The freight percentage is very easy to add and works fine when the cost is added in the company code costing. My problems start when I want to add the freight in the cross-company code costing. I want to setup a cross-company code costing where the freight cost is added to the material in the buying company code and not on the selling company code. The cross-company code costing is setup using special procurement costing keys.
In below costing (CK11N) the procurement costing key is not used.
From the itemization it is shown that purchase info.record 5300067643 is read and the price of 12,97 is determined. There is added 10% in freight coming from the costing sheet.
The freight is shown in the cost component structure as well.
The special procurement type is now changed from ‘20’ to ‘AT´ on the MRP2 screen in the material master. The procurement is now pointing to an internal plant called ‘DCN’.
The costing of material 105050 is now repeated. I get the expected result from changing the procurement key, as I can now see the material is sourced from plant ‘DCN’. DCN is sourcing the material from BJ07, but that is not relevant for the example.
If I now look at the itemization again on the costing in BGA1 I now see that the price is not coming from the info.record. It is the costing in DCN that is used.
I will still like to add the freight cost in BGA1.
How do I add freight cost in BGA1 when I at the same time want to have the costing to be taken from plant DCN?
Please let me know if you need additional information on the customizing setup of the system.
Best regards,
Kim Hjorth Poulsen

Hi Srinu,
Thank You for a prompt feedback.
I have tried to follow Your advise. The special procurement costing key is customized like below.
I have updated the special procurement costing key on the costing 1 view of the material master. When costing the material it is using the special procurement key. This can be seen from the qty. structure tab in CK11N.
It is also costing cross company as intended.
The itemization looks like below.
and the cost component structure looks like below.
Unfortunately the freight is not added in the costing in BGA1.
I noticed that when the costing is made without special procurement key the costing sheet used in the costing is for material components. If the costing is made with the special procurement keys the costing sheet used is for finished and semi-finished materials. The customizing in both of the costing sheets are the same, but only when costing is without the special procurement keys the freight is added.
So unfornutely Your suggestion did not solve the problem.
Best regards,
Kim

Automatically clear the open items for a GL account cross company codes

Hi FICO experts,
Can anyone help me on the following issue urgently?
There are journal entries posted to same GL account with different company code. Is there any way to automatically clear the open items sitting in the GL account in company code A to against the open items for the same GL account in company code B.
The example is below:
Journal in company code A
Dr. 840410      $100
Cr. 111300       $100
Journal in company code B
Dr. 111301   $100
Cr. 840410      $100
Now I want to automatically clear account 840410 by using assignment or text in the journal entry.
It will be highly appreciated for any instructions.
Adele

Hello Adele Wang,
You can enter cross-company code transactions in one step in the General Ledger, Accounts Receivable, and Accounts Payable application components. This function would be used, for example, for centralized procurement or payment.
Integration:For centralized payments, each individual company code enters its own invoices separately, while a central company code pays them. When you are clearing open items, the system makes clearing entries between the company codes participating in the clearing procedure. These clearing entries represent the receivables and payables that exist between the company codes in centralized payment.
Prerequisites:You have specified which company codes are to be processed via a single company code. In this specification, you can distinguish between clearing transactions. You can therefore have different combinations of company codes for incoming and outgoing payments.
You have specified the clearing accounts that record the receivables and payables between the individual company codes. The system posts to these accounts automatically when clearing the open items.
You need to make the required settings in the activity Prepare Cross-Company Code Manual Payments in Customizing for Financial Accounting (Accounts Receivable and Accounts Payable->Business Transactions->Outgoing Payments->Manual Outgoing Payments).
Features:For each company code, the system generates a separate clearing document. A joint transaction number marks these documents as belonging together.
Example:For a clearing transaction (incoming payment, outgoing payment), you have agreed in Customizing that if company code 0001 is specified, open items are also selected from other company codes (0002 and 0003).
Hope I had been able to help you. Please assign points.
Rgds
manish
Clearing can then also be carried out if the account to be cleared has not been created in company code 0001. As long as no items have to be posted to this account in company code 0001, it is not necessary to create a master record for the account in company code 0001.
See also:

BAPI_ACC_DOCUMENT_POST- Cross Company-Code Posting problem

Hi,
I am using BAPI_ACC_DOCUMENT_POST in a program to post a GL document.
The program works fine for single company code posting.
For <b>cross company-code posting</b>, i.e. when my upload file contain more
than 3 company code,
The document gets posted and uploaded in SAP but the posting result i.e
for clearing accounts is incorrect.(clearing accounts of post in company is not generated)
FYI, There is <i>no error message returned from BAPI</i>.
Am I possible to do this with bapi, so I have to split my doc and post
it pro company code?
Thanks in advance.
Best Regards,
Hikaruno

Hi,
It seems the G/L account is a reconcillation account..Try with another G/L account and see.
Regards,
Nagaraj

Directly display cross company code document overview in FBL1N

Hi Buddy
My user wants to display cross company code document overview in FBL1N Directly, after execute.
Instead of going FBL1N --> execute --> Vendor line item display --> once click on cross company code document number than it will take to Display document at lie item level --> once click on call up document overview (F9) than it will display cross company code document overview in FBL1N
It suggested to user we can use FBU3 for cross company code document overview.
But user wants in FBL1N --> execute --> Vendor line item display --> once click on cross company code document number -->than it has to display cross company code document overview in FBL1N.
Is there any possibility in FBL1N or ells we need to create Z. T CODE? For the same.
Thanks in advance.
Regards
asuvamsi

Hi, Experts,
Once i execute the report FBL1N with user's user ID, i have double click on docuement and i click on document overview(At mountain button) it is displaying the respective comapny code wise docuement overview
if i am executing with our user ID it is displaying cross company code docuement overview once click on document overview (At mountain button)
How it possible i have checked SU53 T.code also, there are no authorization problem for both user ID's
Could any body please give me suggestions on the same.
Thanks.
Regards
asuvamsi
Edited by: asuvamsi on Dec 28, 2011 11:24 AM

Cross-company code postings - FI validation

Hi,
We start using the cross-company code postings (transaction OBYA) between company code A and company code B and have to give authorizations both company codes to the Finance users. The idea is to have a set of G/L accounts which are allowed to be used when company code A and B are posted via cross-company code posting.
SAP recommends to implement a validation in FI to restrict the Intercompany scenatios. I attempted to create a FI validation for complete document (call-point 3) with no success:
1)
IC Rule: BSEG-BUKRS = A and BSEG-BUKRS = B and BSEG-HKONT IN ACCOUNTSET
Prerequisite: TRUE
Check: IC rule
Message: E- Account & not allowed for cross-company postings
When I test it, the Intercompany clearing account configured in OBYA, and which is in ACCOUNTSET, shows up in the error message, which unwanted.
2)
IC Rule 1: BKPF-BUKRS = '0017' AND BKPF-BUKRS = '0005'
IC Rule 2: BSEG-HKONT IN ACCOUNTSET
Prerequisite: TRUE
Check: IC Rule 1 --> IC Rule 2
Message: E- Account & not allowed for cross-company postings
No error message is issued at all, even if the G/L account is not in ACCOUNTSET.
Please advise what I am missing.

Hi Nitin,
Thank you for your feeback.
I just wanted to clarify that the cross-company code posting is when company code A can intitiate a posting to company code B simultaneously (for example Intercompany re-charge, cash concentration, etc.). The trigger for cross-company code posting is the company code field on the line item. If company code A is in the header (BKPF-BUKRS) and at least one document line item filled up as company code B, the system created two documents for each company code, offsetting the Intercompany clearing account, configured in OBYA.
For example:
Posting via FB50: Leading company code = company code A (BKPF-BUKRS)
Item 1: Debit; G/L account 1; Cost Center 1; Amount 200; Company code A (as a default)
Item 2: Debit; G/L account 1; Cost Center 2; Amount 100; Company code B (manually changed)
Item 2: Credit; G/L account 2;                        Amount 300; Company code A (as a default)
The systen creates two postings:
Posting 1: company code A
Item 1: Debit; G/L account 1; Cost Center 1; Amount 200;
Item 2: Credit; G/L account 2;                        Amount 300;
Item 2: Debit ; I/C Clearing Account;              Amount 100;
Posting 2: company code B
Item 1: Debit; G/L account 1; Cost Center 2; Amount 100;
Item 2: Credit;I/C Clearing Account;              Amount 100;
The only connection between the two is the cross-company code number (BKPF-BVORG), which assigned by the system once posted, as a logical connection.
I guess we could use a dedicated document type. If that's the case, how would the validation work then?
Coudl you please share more details on the BTE option?
Thank you,
Inna

Cross Company Code Incoming Payment Clearing

Dear All
Good day to you.
I would be grateful if I could get advice on the following:
Process:
Company Code A is receiving Payment from Customer Z of Company Code B
Present SAP Treatment
F-02 Company Code A Bank Account is debited and Customer Z of Company Code B is credited.
F-32 Customer Z's Invoice of Company Code B cleared against the Payment received by Company Code A.
Hence this has become a two step process.
Ideal solution needed
In F-28 or similar other transaction
Company Code A Bank Account is debited and Customer Z of Company Code B is credited and clearing also carried out then and there?
To achieve the ideal solution above what are the configurations (if any) needed.
Thanking you in advance.
Regards
Siddique

Hello,
You can post the cross company code postings even between two controlling areas. The system does not prevent to post documents between two company codes in two controlling area. Need not necessarily they should be under one operating concern. Provided you have to make sure that you have followed the following points:
In OBY6 - To company codes must be assigned to same Company, meaning that you mus thave created a Company and that company must have been assigned to these two company codes.
OBYA - You should maintain the clearing accounts in both the company codes. Meaning that you are posting one leg in one company code and the other leg in the other company. Therefore, it is required to have the missing legs in each company code.
Company Code1 - Posting Key 40 - Clearing Account
Company Code1 - Posting Key 50 - Clearing Account
Company Code2 - Positng Key 40 - Clearing Account
Company Code2 - Posting Key 50 - Clearing Account
OB08 - In case if the two company codes have different local (company code) currencies, you may maintain the exchange rates.
You can now go to F-02 and post a cross company code transaction giving the first leg in first company code and the second leg in second company code. Missing leg in the first company code will be posted to the GL Account mentioned in OBYA and the missing leg in the second company code will be posted to the GL Account mentioned in OBYA. That means you will have four line items overall.
The system will post three document.
Document 1 in First Company Code
Document 2 in Second Company Code
and
Document3 - Cross Company Code Document.
The cross company code document consists of the first company code document number plus company code plus last two digits of the fiscal year.
Hope this must have clarified your doubts.
Please let me know in case if you need further details.
Thanks,
Ravi

Cross company subcontrating in sap with same company code

Similar Messages

Maybe you are looking for