Asset problem: Folder is missing or contains no images.

Hello,
I have created a DPS project using InDesign CS5.5 -- the project is almost completed and everything has been working fine. I needed to update a bit of text and when I attempted to update the folio the update failed giving me a missing asset message. I looked in the links panel and it showed no missing assets. In this particlular file there is an audio .mp3 with a simple play and pause control that I had specified in the Audio/Video pane of the Overlay Creator. This has been working flawlessly. Now it is giving me an error message. None of my assets have been moved. But just to be sure I browsed to the folder where these assets have been stored (Audio_Controller/play.png  Audio_Controller/pause.png) and indeed they are still there. Yet I continue to get the Yellow triangle with an ! in it and the following message: "The folder is either missing or contains no images. Resolve by selecting a folder containing supported assets."
I moved them into the images folder and relinked thinking that might solve the problem but had the same results. Does anyone have any ideas?
I've done a lot of looking and haven't seen this problem mentioned before.
Thank you,
LKovalic
I want to add that the "play" and "pause" controllers have been saved as .png as per DPS audio instructions. This is an DPS project that has been working consistently with the EXACT same assets in the EXACT same places. I made a small text page to one folio page. I did not move anything.

If you can't access BIOS with the hard disk connected, you certainly won't be able to boot to the usb recovery flashdrive. That is indicative of a failed hard disk.
Install a new hard disk and then boot to the recovery flashdrive.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Similar Messages

  • Problem with scrolling a panel containing an image

    I am having a problem adding scrolling capabilities to a tabbed panel containing pages containing an image. In my program, I have a class called ImagePanel that extends JPanel and contains an image read from a file. In another class, I create a tabbed panel and add to it ImagePanels.
    The problem I'm facing is that the pages added to my tabbed panel contain scroll bars, but these scroll bars are not scrollable (i.e. I cannot use the bars the scroll and see the missing parts of the image).
    Any help on this manner is highly appreciated.
    The code is shown below:
    JTabbedPane m_pathwayTabbedPane = new JTabbedPane();
    ImageIcon overviewImageIcon = IconLoader.readImageIcon(pathway.gif);
    ImagePanel overviewPanel = new ImagePanel(overviewImageIcon.getImage());
    JScrollPane graphcrollPane = new JScrollPane(overviewPanel,
    ScrollPaneConstants.VERTICAL_SCROLLBAR_ALWAYS,
    ScrollPaneConstants.HORIZONTAL_SCROLLBAR_ALWAYS);
    m_pathwayTabbedPane.addTab(StringManager.OVERVIEW, graphcrollPane);

    import java.awt.*;
    import java.io.*;
    import java.net.*;
    import javax.imageio.ImageIO;
    import javax.swing.*;
    public class ScrollingImages
        public static void main(String[] args)
            String[] fileNames = {
                "images/bclynx.jpg", "images/mtngoat.jpg", "images/redfox.jpg"
            JPanel panel = new JPanel(new GridBagLayout());
            panel.setBackground(Color.black);
            GridBagConstraints gbc = new GridBagConstraints();
            gbc.insets = new Insets(5,5,5,5);
            gbc.gridwidth = gbc.REMAINDER;
            for(int j = 0; j < fileNames.length; j++)
                panel.add(new ImageComponent(fileNames[j]), gbc);
            JFrame f = new JFrame();
            f.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
            f.getContentPane().add(new JScrollPane(panel));
            f.setSize(400,400);
            f.setLocation(200,200);
            f.setVisible(true);
    class ImageComponent extends JPanel
        Image image;
        public ImageComponent(String fileName)
            loadImage(fileName);
            setBackground(Color.black);
        protected void paintComponent(Graphics g)
            super.paintComponent(g);
            int w = getWidth();
            int h = getHeight();
            int imageWidth = image.getWidth(this);
            int imageHeight = image.getHeight(this);
            int x = (w - imageWidth)/2;
            int y = (h - imageHeight)/2;
            g.drawImage(image, x, y, this);
         * For the JScrollPane which will inquire about our size
         * which it needs to properly set its scrollbars.
        public Dimension getPreferredSize()
            return new Dimension(image.getWidth(this), image.getHeight(this));
        private void loadImage(String fileName)
            try
                URL url = getClass().getResource(fileName);
                image = ImageIO.read(url);
            catch(MalformedURLException mue)
                System.out.println(mue.getMessage());
            catch(IOException ioe)
                System.out.println(ioe.getMessage());
    }

  • Synchronize Folder problem - LR finds missing photos that aren't missing

    A bit of background:
    I decided to dive in and clean up a big 40K catalog I have. This involved:
    Moving images around
    Creating new folders
    Renaming existing folders
    Renaming all photos
    All of this was done within LR to avoid problems. But now, everything is working fine, LR does not complain that there are missing photos EXCEPT when I try to synchronize a folder.
    The strange this is there is no question mark on the images and when I use the Find Missing Photos, LR tells me that there are no missing photos.
    But when I try to synchronize a folder (any), it finds all the images as new images and suggests to remove the missing photos (both matching the exact number of images). Obviously I don't want to do that and loose my edits...
    I found some information here, it seems to be an old bug but no solutions work for me... I really don't want to go back and redo all this work. Is there a magic trick?
    Thanks!

    Thanks but this a completely different problem. You are referring to the "Treat JPEG files next to RAW files as separated photos" setting that I have unchecked purposely and I do not shoot RAW + Jpeg anyways.
    Your issue is a normal behavior. LR assumes that Jpeg+RAW shooters will only required the RAW to be imported in LR unless you change that setting.
    My problem was a very specific instance where the volume name did not match case with the folder names in LR. As soon as I fixed that, it went back to normal.

  • Reinstall problem.  Files missing in Adobe App. Support Folder.

    When I start up Photoshop in CS2, it says that one or more files in the Adobe Application Support folder are missing and I need to run the PS installer and reinstall.  But when I try to do that from the installer CD, it won't let me click on the PS box (or any of the other boxes, for that matter) to reinstall it.  (It also shows that Version Cue is already installed, but none of the other programs are, which they are, because I can use them.)  Help, please!

    Keep in mind that CS2 is not supported in Leopard.
    as far as the missing files this should help. http://forums.adobe.com/thread/370710?tstart=0
    there is also a CS3 clean script. Flash MX should not stop CS3 from installing.

  • The boot configuration data for your Pc is missing or contains errors: error code 0x000014c

    Hello, 
    See if any body may help here... I get this blue screen:
    RECOVERY
    Your PC needs to be repaired: 
    The Boot Configuration Data for your PC is missing or contains errors.
    file:\\EFI\Microsoft\Boot\BCD
    Error code: 0xc000014c
    You'll need to use the recovery tools on your installation media. If you don't have any installation media (like a a disc or USB device), contact your system administrator or PC manufacturer.
    Press Esc for UEFI Firmware Settings
    First I was able to get into the option 11 and run the whole factory reset, i was so happy because I tought it will be easy.. but then after I did the factory reset.. I keep getting this blue screen. if I press ESC I get into this next screen:
    F1 System Information
    F2 System Diagnostics
    F9 Boot Device Options
    F10 BIOS Setup
    F11 System Recovery
    ENTER - Continue Startup.
    this is what happen when I click any of this options:
    F1 I get into the System Information with no problems, then I click <ESC> to continue and get back to the last screen... then I press F2 and super, I am able to run Memory Test and Hard Drive Check 100% with no problems in any of those, after I am done with my teste I press exit and I am back to the F1,F2, ETC menu... now I want to try F9, F10 or F11. bummer.. in this 3 options I get back to the blue screen described at the beggining of this post. (I already connect a USB with an boot loader, which works perfectly) 
    so I can't do anything, nothing at all!! crazzines. 
    So what I did to check why I can't get into the BIOS or at least to boot from my USB... I removed the botton cover of my laptop and removed the hard drive and that's how then I was or I am able to Log into the BIOS, - I did the changes to boot first from the USB and then from the HD and this is how I was able to boot from the USB - BUT If I connect back the Hard drive, I am not able to get into the BIOS or boot from the USB - so basically I am stuck in this blue screen and I can't boot from a USB if I have the HD connected.. I can't use any option.. no BIOS, nothing.. only if again, i disconnect the HD.  
    This is an:
    HP ENVY TS Sleekbook 4
    PRODUCT NUMBER  D1A99UA#ABA
    SYSTEM BOARD ID: 1894
    Bios F.25 
    **** I though that by updating the BIOS I may be able to get help, nothing. What I did is, I removed the HD and then and boot from the USB and with a DOS command propmt I excecuted the Bios Update from F.21 to f.25... but again, when I installed the hard drive back, BUMMER, nothing I can't do nothing but this silly blue screen. 
    Any idea of what should I do? 
    Thanks in advance.
    This question was solved.
    View Solution.

    If you can't access BIOS with the hard disk connected, you certainly won't be able to boot to the usb recovery flashdrive. That is indicative of a failed hard disk.
    Install a new hard disk and then boot to the recovery flashdrive.
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • Trying to remove an old version of I Tunes and keep getting the message "The folder path I Tunes contains an invalid character' . It won't let me go any further, have tried deleting/repairing the program but keep getting the same message?

    trying to remove an old version of I tunes, but keep getting the message 'The folder path I Tunes contains an invalid character'
    It won't let me go any further, have tried deleting/repairing but get the same message and am blocked from continuing?

    Hi Barbara,
    I had a similar problem recently and using the "more like this" feature I discovered an answer. To a problem posed by Holo7,  who like myself was a newbie on this platform,  b noir proposed a solution to Holo7's problem that also worked with my problem. It involves downloading a version of MS Windows Instal Cleanup and using it to completely remove all traces of the old version.
    If you look at my problem (follow OldGit66) and the link to Holo7's problem then you will find b noir's answer which I think may help you. I am new around here so you might want to wait for one of the higher status correspondents.
    Regards
    John

  • The Folder Path "My Documents contains an Invalid Character"

    Hello.
    I have a major problem at hand.
    I presently have iTunes 7.6 on my Dell laptop
    when i try installing itunes 7.7 or 7.7.1, it gives an error
    "The folder path my documents contains an invalid character"
    I scoured the internet, but to no avail...
    Please help
    Sometime back, the name of My Documents have been changed to "id" by mistake
    Then itunes 7.6 also wasnt working.. Then i went to the registry and changed all the folder paths, and then it was working....
    So, please help...
    Thanks!

    If the same problem occurs in another account, it suggests the message is misleading and the problem is not with My Documents itself.
    That is unless you have changed the path c:\Documents and Settings which is common to all accounts.
    It sounds as though there is a registry key set with corrupt information somewhere that you haven't found yet.
    Something you could try is a complete removal of iTunes according to the following method. I have also included instructions for installer clean up which you should do if one of the uninstalls fails. I am guessing that the iTunes uninstall might fail with a similar message.
    == uninstall with cleanup ==
    Download a fresh copy of iTunes and the stand alone version of Quicktime
    http://www.apple.com/quicktime/download/win.html
    http://www.apple.com/itunes/download/
    Download and install Microsoft Installer cleanup utility, there are instructions on the page as well as the download. Note that what you download is the installer not the program – you have to run it to install the program
    http://support.microsoft.com/kb/290301/
    Now use the following method to remove iTunes and its components:
    XP
    http://support.apple.com/kb/HT1925
    Vista
    http://support.apple.com/kb/HT1923
    If you hit a problem with one of the uninstalls don't worry, carry on with the deleting of files and folders as directed in the method.
    When you get to deleting Quicktime files in the system32 folder as advised in the method, you can delete and file or folder called Quicktime.
    Restart your PC.
    Run the Microsoft Installer Cleanup Utility. (Start > All Programs > Windows Install Clean Up)
    Remove any references you find to the programs you removed - strictly speaking you only need to worry about those programs where the uninstall failed.
    restart your PC
    Install the stand alone Quicktime and check that it works.
    If it does, install iTunes.
    ===

  • "The folder path 'Accessories/Quicktime' contains an invalid character."

    After countless attempts to install iTunes 9.2.1 for Windows 64-bit processors I keep getting this message: "The folder path 'Accessories/Quicktime' contains an invalid character."
    How do I correct this so I can install and finally use iTunes?

    It usually indicates trouble with one of the msi files for an existing program on the PC that is being updated by one of the installers in the iTunes64Setup.exe bundle ... but I'm not familiar with that particular Accessories/QuickTime folder path myself.
    Can you check something for me please?
    Do a search for an "Accessories" folder on the PC. Do any of them have a "QuickTime" subfolder inside them? If so, what is the full file to those directories?
    (Trying to work out which particular msi is causing the trouble ... or if there's a slightly different cause of the problem afoot.)

  • ITunes fails to install update "folder path program files contains an invalid character"

    I'm trying to get the newest version of itunes, but I keep getting "the folder path program files contains an invalid character." I've seen on here before attempts to use Microsoft fix it and Windows Clean up which I've tried and both haven't helped. I've gone to youtube and tried to delete the appropriate folders under the registry edit. Nothing seems to work. I need the new itunes to update my iphone because of the recent hardware crash via the new update.

    At what stage in the process does this occur?
    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
    The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
    Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
    tt2

  • Error Message:The folder path 'Program Files' contains an invalid character

    I have an 80G iPod. I never had a problem with the itunes program until I switched to Vista. When I try to open iTunes I get the following error message:
    *The folder path 'Program Files' contains an invalid character*
    I have itunes installed on both my HP and on an external hard drive that I use as my backup in case something goes wrong. Neither one opens and I get the same error message on both. I have tried to uninstall iTunes and then reinstall and get the same message so I can't uninstall.
    I'm really frustrated, I need to get to my music for a huge presentation in a few days. Can anyone help?
    Thanks in advance,
    Jejo

    Have you tried working through the steps in the General section of this article?
    http://support.apple.com/kb/HT1926

  • I am trying to download the latest iTunes update.  Keep getting error message stating "The folder path 'My Documents' contains an invalid character".  I can't uninstall iTunes for the same reason.  HELP!

    I am trying to download the latest iTunes update; keep getting error message that says "The folder path 'My Documents' contains an invalid character".  This also happens when I try to uninstall iTunes.  HELP!

    OK, never mind!  I saw another question on the right side that addressed the problem, and it worked perfectly!  Went to Major Geeks' page, downloaded the Windows Installer Cleanup Utility, and was able to reinstall the updated version of iTunes!  This community is super!

  • Windows 8.1 installation first reboot 0xc000007b ntoskrnl.exe missing or contains errors

    I'm trying to install Windows 8.1 (with updata 1) using UEFI on my Intel DP45SG.
    Starting up the installation by using UEFI works fine, but after the files have been copied and the system reboots I get the following error code: 0xc000007b ntoskrnl.exe missing or contains errors
    I've tried reformatting my USB stick and recopying the files, as well as re downloading the installation files but this hasn't resolved the problem.
    Is there anything I can try to fix this? Perhaps give some commands in the commands prompt?

    Hi Gi,
    It might be caused by changes in Windows 8 PnP in which Boot Start Drivers are not installed by default.
    Please try following
    the instructions as mentioned in the KB aticle.
    https://support.microsoft.com/en-us/kb/2751461?wa=wsignin1.0
    Regards,
    D. Wu
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • When trying to upload a MS word file (.docx) to gmail, it uploads into a folder that doesn't contain the original document when i try to download it from e-mail.  how do i solve this?

    when trying to upload a MS word file (.docx) to gmail, it uploads as a 'folder' that doesn't contain the original document when i try to download it back from the e-mail.  how do i set the format to simply upload the document itself???  Thanks...

    Yes, excuse me. attach a file.  I have separate folders on my desktop to organize my word documents, so I'm guessing this might be a part of the problem.  When I go to attach one of these documents into gmail, the resulting attachment is another folder icon (not the original organizational folders) with 4 subfolders containing a slew of .xml files reading things like "header.xml" "format.xml" "settings.xml" "style.xml" "contenttype.xml" There are also a few .jpegs and a small folder reading "word" as one of the subfolders.

  • Error code: 0xc0000001 file: \windows\system32\winload.efi missing or contains errors

    I have a new 2 month old(Aug 2014) hp eliteone 800 all in one computer running win 8.1 64bit. i have two  1 tb hard drives raid configuration. left computer on for an afternoon and when I came back it was off mysteriously. tried to turn on and it
    attempted to repair and was never able to repair. hp sent a new windows 8 software to install, they said os was corrupt. installed three times now i get error code: 0xc0000001 file: \windows\system32\winload.efi  missing or contains errors. hp said installation
    disc probably corrupt and sent me another. installed twice with same result, error code: 0xc0000001 file: \windows\system32\winload.efi  missing or contains errors. This began after the computer was just one month old and after i had placed 300-400
    gb of my personal data from other computers on it. I need all of these files so can't just recover/delete all of the files on the computer, although i have read that that may be my only solution? If i do recover will the files still be on the second hard drive??
    can you help with this problem?? thanks.

    Hi Richard,
    Did you try to repair or reinstall the system when you insert the new media?
    Have you tried to carry out a system recovery, which will restore your system back to factory defaults and how was the result?
    In addition, I suggest you use the new installation media to do a clean install(full format the old system).
    How to perform a clean installation of Windows
    http://windows.microsoft.com/en-IN/windows-8/clean-install
    Note: If you have important personal data, remember to insert your drive into another computer to backup your personal data before you do any operation.
    Karen Hu
    TechNet Community Support

  • Lost all photos on my iPhoto and get the ERROR WRITING TO DISK when trying to reload from Time Machine. iPhoto cannot import your photos because there was a problem writing to the volume containing your iPHOTO LIBRARY  . Looking for solution.

    Lost all photos on my iPhoto and get the ERROR WRITING TO DISK when trying to reload from Time Machine. iPhoto cannot import your photos because there was a problem writing to the volume containing your iPHOTO LIBRARY  . Looking for solution.

    Problems such as yours are sometimes caused by files that should belong to you but are locked or have wrong permissions. This procedure will check for such files. It makes no changes and therefore will not, in itself, solve your problem.
    First, empty the Trash, if possible.
    Triple-click anywhere in the line below on this page to select it, then copy the selected text to the Clipboard by pressing the key combination command-C:
    find ~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \) 2>&- | wc -l | pbcopy
    Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window (command-V). The command may take a noticeable amount of time to run. Wait for a new line ending in a dollar sign ($) to appear.
    The output of the command will be a number. It's automatically copied to the Clipboard. Please paste it into a reply.
    The Terminal window doesn't show the output. Please don't copy anything from there.

Maybe you are looking for