Asset under construction balance incorrect.

We have identified 2 AuCs where the balance on them is not correct. for example, the asset had a small balance in the prev fiscal year. the line items in the current year all add up to this balance, which should bring the balance to nil. On the asset history report, or in display asset (AS03) the asset shows a balance of -£12183, despite all the postings listed in AS03 matching the AuC supspense a/c.
It appears as if one of the postings has not adjusted the balance.
I have run report RAABST01 which list my asset as a problem but doesn't tell me which document is causing the problem. The report result shows as....
CEPBV 0
I don't understand how the balance of this asset is correct when the postings in the General Ledger and FI-AA appear to match, and I'm stuck on what I should do next.
Any advice would be greatly appreciated
Thanks
Graham

Hi,
Get the list of effected assets through ABST output.
Go to each asset through AW01N, and check for the line items posted to it and compare the same with your AUC recon GL account line items, which you got from FBL3N.
Since ABST will only identifies the inconsistant asssts, but wont show any kind of further information related to the probelm.
So with this you will found some documents, which may be posted to one part and anot posted to another part.
Hope this is clear to you.
Thanks,
Srinu

Similar Messages

Settlement of WBS element down payments to an asset under constructions

The down payment (of the transactions tcode F-47 and tcode F-110), are
always settlement wbs element (tcode CJ88), we do not want to post down
payments to the receiving asset under construction (transaction type
180 or 181).
In the down payments are always taken into account in the settlement to
an asset. The settlement of the down payment is the actual reason for
the previous update of down payments in FI (Transaction type group
15). Furthermore, the settlement of down payments to assets should
not be capitalize.

When you search on this forum try to put Date range "ALL" to get more results. Please read below threads and you will get the solution.
MIRO:Transaction in area 15 contradicts the net book value rule
Transaction in area 01 contradicts the NBV
Looks like you have a negative balance in your WBS which you are trying to settle to FA.

Error in dep run - Asset under construction

Hi!
Could someone please help me with the following:
My customer has a large amount of assets under construction (AuC) and also other assets. None of the assets under consctruction should have a depreciation key (or depreciation key 0000) and no depreciation accounts are allocated in transaction AO93 for AuC . But my customer now has incorrectly created a few AuC (that should NOT be depreciated at all) with depreciation key LINK. What happened?
1) Test run depreciation (AFAB) for all assets in period 1 during 2010. In test run no error log was created, everything looked fine.
2) Executed depreciation in background.
3) When looking at each of the assets in transaction AW01N I can see that all assets (both real assets and AuC with depreciation key) has depreciation posted in period 1. BUT, no depreciation has been posted in general ledger on any of the asset classes!
4) I have now changed the depreciation key on all AUC in AS02 to 0000 so that no depreciation will be calculated.
5) Trying to run AFAB again for period 2 but error message says that period 1 was terminated and that period 1 should be restarted.
6) Trying to run period 1 again in AFAB with restart but error message says "Account 'Acc.dep. accnt.for ordinary depreciation' could not be found for area 01" and refering to all of the incorrect AuC that I have corrected (to no depreciation key)
Please how can I go on? I want to reverse the depreciation in period 1 since I didn't get any posting i the general ledger. And then I want to make a new depreciation run only with correct assets (only depreciation on real assets, not on AuC).
Please help!
I am very thankful for any help!
Many many thanks in advance!
with regards,
Prabhakar

Hi,
I had the similar situation couple of months back. I followed below mentioned process and it worked out well.
1) Maintain GL account for depreciation in AO90
2) restart depreciation run for the relevant period
3) change the depreciation key to 0000
4) repeat depreciation run for the same period (It will post a reverse entry in the same month itself. So the net impact of depreciation in the same month is zero).
By the way I have a suggestion to prevent this issue in future.
You may not be able to detect this issue on test run if you execute on foreground mode because the test run execution is restricted to 1000 assets. If the error is on 1001th asset, you will not know.
Hence, always execute depreciation test run on background mode, check for any errors and execute production run only if there are no errors.
Hope this helps....
Best Regards,
Madhu

Error in depreciation run - assets under construction

Hi!
Could someone please help me with the following:
My customer has a large amount of assets under construction (AuC) and also other assets. None of the assets under consctruction should have a depreciation key (or depreciation key 0000) and no depreciation accounts are allocated in transaction AO93 for AuC . But my customer now has incorrectly created a few AuC (that should NOT be depreciated at all) with depreciation key LINK. What happened?
1) Test run depreciation (AFAB) for all assets in period 1 during 2010. In test run no error log was created, everything looked fine.
2) Executed depreciation in background.
3) When looking at each of the assets in transaction AW01N I can see that all assets (both real assets and AuC with depreciation key) has depreciation posted in period 1. BUT, no depreciation has been posted in general ledger on any of the asset classes!
4) I have now changed the depreciation key on all AUC in AS02 to 0000 so that no depreciation will be calculated.
5) Trying to run AFAB again for period 2 but error message says that period 1 was terminated and that period 1 should be restarted.
6) Trying to run period 1 again in AFAB with restart but error message says "Account 'Acc.dep. accnt.for ordinary depreciation' could not be found for area 01" and refering to all of the incorrect AuC that I have corrected (to no depreciation key)
Please how can I go on? I want to reverse the depreciation in period 1 since I didn't get any posting i the general ledger. And then I want to make a new depreciation run only with correct assets (only depreciation on real assets, not on AuC).
Please help!
I am very thankful for any help!
Many many thanks in advance!

Hi, Can you please how the issue is solved because i have the same problem which i need to resolve immediately. Please reply me as soon as possible
with regards,
Prabhakar

Settlement of an Internal Order to Asset Under Construction

We are running SAP 4.7 and Iam trying to settle an Internal order to AUC and I get the following error
You cannot use this transaction type to post to this asset
Message no. AA834
Diagnosis
The transaction type entered belongs to transaction type group 15. According to the specifications for this transaction type group, posting with transactions types belonging to this group are only allowed in specific asset classes (for example, asset classes for assets under construction).
The asset to which you are posting belongs to class 18000 (chart of depreciation SEEF). You cannot post to this class using the transaction type you have entered.
Procedure
Check the asset number entered. You may want to allow posting with this transaction type group for the asset class of the asset.
**Please take note that the costs which have come on the internal oder are through GR( Goods receipt) and not down payment. Also note that last month, the order settled without any problems!**

Hi,
thanks for your answer.
I want to do that because of some french tax rules.
These rules say that goods, hours or services produced internally for the contruction of an asset can be "delivered" to itself.
So you can register output tax based on the value produced but you have also to register input tax for the same amount.
Finally the balance for VAT amount is 0.
I was interested to know if that was possible to automize. If not, there is still the possibility to make a separate postings at month end or year end.
Best Regards

Asset Under Construction(AUC),During month end settlement run(via KO8G)

Hi Guys ,
please hlep on this AUC :
During month end settlement run (via tcode KO8G), if there are -ve (credit) values to be settled to an Asset Under Construction (AUC) asset which does not have sufficient +ve value in the current FY, the settlement run will prompt an error message "Balance for transaction type group 10 negative for the area 01". The TT posted via the settlement run is TT115. To get around, user has to raise a manual journal (via doc type AT) to post the -ve value to the same AUC asset via TT101. TT 115 and 101 are configured differently (see attached).
Since the Fixed Assets system does accept credit posting to AUC via a journal, is there a solution to make posting go through via the settlement run?
Regards,
Narra

You can settle the AUC value in one period and posting can be made in another period. in the same you can give the different asset value date in KO88 screen. The only limitation is this possible only if the fiscal year is same.
Give the asset value date as 15.07.2007 in KO88
Hope this will work
Radha

Down payments request for Asset Under Construction

Hello Expert
while Down Payment request to vendors - for Asset Under Construction, system showing error.
Contact your system administrator (table error)
Message no. AA866
Diagnosis
No account has been entered for posting down payments in area 01 under the account assignment key IN95 (chart of accounts YAIN).
Procedure
Enter the account using the Customizing menu.
Pls Reply frinds.
regards,
Riten patel

Dear:
First check in OAYB that have AUC class been specified for down payments and then go to transaction AO90 and maintain the GL account for depreciation are 01 under the Balance Sheet account in the field Acquisition: Down Payment. It will resolve your issue.
Regards

Migrating Assets Under Construction?

Hi all,
A customer has many fixed assets that are currently under construction during a Go Live implementation. I realize ByD uses projects as a bit of a work around for handling assets under construction in the system, but what is the best way to handle the data-migration of these assets under construction in ByD? (along with the expenses/etc associated with these assets under construction)?
thanks a lot,
-Ben

Hi Gopal,
My understanding is that project balances cannot be migrated in ByD. We have been advised to manually key in all existing projects with budgets, sales orders etc. We are not sure what to do with existing project costs and invoices as historical data cannot be migrated either.
Since you suggested migrating the 'Assets under construction' as projects, I wonder if that is a special category? I was planning on using 'Direct Cost Project' process variant as suggested in the ByD help centre for 'Assets Under Construction'
Any further information is appreciated. Thanks

Steps to create Asset under construction

Hi All,
Can any one pls explain me whats diff b/w normal asset class and AUC, and even provide me the steps to create AUC. (what are the GL acc assignments to be done)
It's urgent. pls help me...
thanks,
sravanthi

Dear sravanthi
For Normal Asset, We create an Asset in AS01 and we assign Depreciation area and depreciation is calculated.
For Asset under construction, SAP Provides a Seperate Asset class in As01 and no depreciation is calculated on this asset.
Fixed asset that is in the process of being completed at the time the balance sheet is being produced.
Assets under construction are shown as a separate balance sheet item for the enterprise. Assets under construction can be managed for bookkeeping purposes in the FI-AA component using asset master records in special asset classes.
To also benefit from management accounting functions that go beyond the asset accounting level, you can use capital investment measures in the Investment Management (IM) component. Investment measures can be managed in the form of internal orders or projects
For Steps to create AUC Refer to SAP Best Practices
http://help.sap.com/bp_bblibrary/500/BBlibrary_start.htm
Please let me know if you need more information.
Assign points if useful.
Regards
MSReddy

Asset under construction Accounting determination

Hi dear friends,
What accouts shoul I use in accounting determiation for assets under construction? Here should I inform them in OA90? Are Balance account or P&L account?
Brazilian legislation just allow its depreciation after its conclusion however we need to post values in a special area in order to receive some benefits from gevernment (to credit taxes).
Thank you a lot!!!!!
N,
Edited by: Naej on May 7, 2010 1:49 AM
Edited by: Naej on May 7, 2010 2:13 AM
Edited by: Naej on May 7, 2010 2:15 AM

Please have look at the SAP Note 7595 and check your settings against it.
Besides, all the account assignment need to be maintained in AO90 for all assets class (including AUC)

Asset under construction not completely credited

Hi,
We are getting the message "asset under construction not completely credited" when trying to process an actual settlement for an internal order. We have checked all our settlement rules and read SAP Note 726031 but we are still getting stuck on this error. It may have something to do with a 2c USD balance on the AUC that doesn't want to clear. The local (AUD) balance is zero. We tried posting a 2c USD transaction to the Order but that didn't work either.
Thanks
Bill

Hello,
Check the AUC balances and also check the settlement rule upto which period it is maintained. If the to period is ended with value and remove the " To period" and settle the values.
Thanks
Lakshmi Narayana

Error when processing asset under construction (AuC) for WBS element message no cj824

Hi,
i am getting error message when i change dates in activities.
Error when processing asset under construction (AuC) for WBS element
Message no. CJ 824
i have checked related post but did not find any solution. also check SAP Note but not related to my issue.
Please guide.
thanks
Sunil

Hi Ken,
Please check below screens:
according to this error message AUC has some missing field or some incorrect value. but when i checked via program RAUNVA00 which will display
Incomplete Assets - Detail List.
but this program does not return any incompleteness.
i found many threads and SAP Not but none of is related to my program. this problem comes when i change dates in activity and save the project.
Please suggest what to do now.
thanks
Sunil

Transfer Asset Under Construction

Dear Forum members:
We want to transfer an asset from one Cocode to another due to settlement under the wrong Cocode. Is it possible to transfer Asset under construction from one company code to another. So far, tests carried out with abt1n have been futile.
What factors need to be considered before hand in carrying out an intercompany asset transfer?

HI,
Provide another settlement rule for the Order for which asset you want to transfer balances from AUC and made settlement run again.
Murali

Creation of internal order (investment order- asset under construction)

I want to capture the cost of asset under construction through internal order (controlling) not throgh Investment Measure module. How i can do this.

Hi
It is the same flow as explained by AP above
If Investment management module is active, then on settlement i believe the AUC asset is automatically generated. Therefore you have to define an asset master and then include this asset in the settlement rule of the IO. Thus on settlement the cost in the IO would flow to the asset
Thank You,

New Depreciation Area in Asset Master Data, for assets under construction.

Hi,
The issue is relating to New Depreciation area. We have created new Depreciation area as 80=IFRS. We had followed three steps
1. Create Depreciation area via OADB.
2. Activate Depreciation area via OAYZ.
3. Automatic opening of new depreciation are via AFBN and program RAFABNEW :-
3.1 u2013 Indicator: Leave values initial = ticked. Set this indicator if you want to open the newly created depreciation area without any values i.e. blank.
In this we have find that the old assets value has been copied. But when we are doing internal order settlement through KO88 i.e. from pre-cap to AUC we are not finding new Depreciation area 80=IFRS in AUC. We had checked in AW01N.
Letu2019s assume that creating a new deprecation area is normally not required since these assets are not depreciated. But During the final settlement, the new depreciation area should also automatically supplied with values from the reference depreciation area from the AUC(assets under construction) in the completed assets. But we doesnu2019t find any values of in Dep Key = 80 IFRS for final assets.
In Assets Class of AUC we had used Investmnet Measure as Status of AUC.
Kindly provide solution for the same.
Nikhil

Check Transfer Variant 5 (under Transactions->Intercompany Asset Transfers->Automatic Intercompany Asset Transfers->Define Transfer Variants):
5     Investment measure settlement
Your Transfer Method is most likely 1 now (without transfer to dependant areas), change it to:
4     Gross method with transfer of values to dependent areas
This should help.

Asset under construction balance incorrect.

Similar Messages

Maybe you are looking for