Down payments request for Asset Under Construction

Hello Expert
while Down Payment request to vendors - for Asset Under Construction, system showing error.
Contact your system administrator (table error)
Message no. AA866
Diagnosis
No account has been entered for posting down payments in area 01 under the account assignment key IN95 (chart of accounts YAIN).
Procedure
Enter the account using the Customizing menu.
Pls Reply frinds.
regards,
Riten patel

Dear:
First check in OAYB that have AUC class been specified for down payments and then go to transaction AO90 and maintain the GL account for depreciation are 01 under the Balance Sheet account in the field Acquisition: Down Payment. It will resolve your issue.
Regards

Similar Messages

Down payment request for assets using bapi_acc_document_post

Hi guys(girls)!,
I<< priority reduced >>
I'm posting a down payment request to an asset with a z program using bapi_acc_document_post. Everything is fine, but, when i go to fb03 to check the generated document i don't see the asset number associated to the purchase doc. When i go to bseg to check, i don't see the asset number and the subnumber. I lack just these to fields even i'm passing the values to correct fields in bapiacgl09.
This is the values i'm passing:
wa_acctgl-itemno_acc = iterator.
wa_acctgl-gl_account = lv_skont.
wa_acctgl-vendor_no   = p_vendor.
wa_acctgl-doc_type    = p_tipdoc.
wa_acctgl-item_text   = p_txtcab.
wa_acctgl-po_number   = p_ponum.
wa_acctgl-po_item     = s_ekpo-ebelp.
wa_acctgl-serial_no   = imp_no.
wa_acctgl-asset_no    = wa_ekkn-anln1.
wa_acctgl-sub_number = wa_ekkn-anln2.
wa_acctgl-acct_type   = 'A'.
wa_acctgl-CS_TRANS_T = '100'.
wa_acctgl-asval_date = sy-datum.
APPEND wa_acctgl      TO gt_acctgl.
CLEAR wa_acctgl.
Please help!.
Edited by: Rob Burbank on Oct 24, 2011 9:44 AM
Edited by: ramvargash on Oct 25, 2011 2:54 PM

Hi Eduardo, what i'm trying to do is a down payment request for an asset. Indeed, i do the post. My problem is that the asset main number and the asset subnumber are not getting saved in bseg, so when i go to fb03 and double click on a line item, i got prompt to fb03 in visualize mode, and the fixed asset field is blank.
I have now a week trying to get the asset main number and the asset subnumber getting saved in bseg. I note that i have other field that are not getting saved 'cause i'm not passing the value thru the bapi. This field is LNRAN.
If you or anybody have a clue how to solve this, i would appreciate the help.
Ramón Vargas

Settlement of WBS element down payments to an asset under constructions

The down payment (of the transactions tcode F-47 and tcode F-110), are
always settlement wbs element (tcode CJ88), we do not want to post down
payments to the receiving asset under construction (transaction type
180 or 181).
In the down payments are always taken into account in the settlement to
an asset. The settlement of the down payment is the actual reason for
the previous update of down payments in FI (Transaction type group
15). Furthermore, the settlement of down payments to assets should
not be capitalize.

When you search on this forum try to put Date range "ALL" to get more results. Please read below threads and you will get the solution.
MIRO:Transaction in area 15 contradicts the net book value rule
Transaction in area 01 contradicts the NBV
Looks like you have a negative balance in your WBS which you are trying to settle to FA.

Down Payment Posting in Assets Under Construction

Hi
In case of AuC, when we post the down payment, the standard Accounting entry created is:
Vendor Advance A/c Dr
Asset Under Construction (Down Payment) Dr
     To Bank A/c
     To Asset Clearing A/c
When we Post the invoice , the A/c entry passed is
Asset under Construction A/c Dr
      To vendor A/c Cr
When we clear the down payment against the invoice
Vendor A/c Dr
Asset Clearing A/c Dr
     To Vendor Advance A/c
     To Asset under Construction (Down Payment)
My issue is:
1. Why the Asset account should be involved for making down payments? At the time of down payments, the accounting entry that should be passed by the system showuld be
Vendor A/c Dr
    To Bank A/c
2. What happens in the case of year end activities? Why does system create two entries for current assets?
regards
Sanil Bhandari

na

Down payment request for asset-based Purchase order

Please Help!
I have a PO for an Asset for 10000$. down payment need to be paid for $5000.
I went to f-47 to create down payment request BASED ON PO and there is no field to put the PO number.
What am i missing? Is there config need to be done? or anyting on the PO need to be checked?

Hi
Look for 'Purch. Doc.' field. If not, check the field status in OBC4 and OB41
Thank You,

Down payments for Asset Under Construction

Hi Experts,
Urgent!
My client paying advances to vendors, thru TC-F-48.
Previously there is no PO requirement ,now asper client requirement I put PO fild as requirement in posting key 29.
1)There is no problem for payment to vendors -for Raw materials.
2)while paying advance to vendors - for Asset Under Construction, system showing error.
*Error is:
Contact your system administrator (table error)
Message no. AA866
Diagnosis
No account has been entered for posting down payments in area 01 under the account assignment key 4800 (chart of accounts FTL).
Procedure
Enter the account using the Customizing menu.
Pls Reply frinds.
Regards
vinod

Hi Vinod,
I hope that you are following Valuated goods receipt concept.
Valuated goods receipt: Asset will be debited at the time of goods receipt
Non valuated good receipt: Asset will be debited at the time of invoice receipt
If you follow valuated goods receipt concept, then at the time of making down payment, AUC should not be debited (whatever the value date/ capitalization date be). Please refer SAP note number 310368 (valuated goods receipt paragraph) for reference. In that they have clearly mentioned the steps to make down payment against asset under construction Purchase Order without debiting to AUC and without any error message. You have to make F5 378 message number from error message to warning message and in posting key 29 and 39, you have to supress the asset related fields. If you have done the above settings, then system will not show any error message to update G/L account in AO90 transaction code for the Acquisition: down payments and Down payment clearing - 2nd and 4th field or for AUC related fields.
Hope this helps. Assign points if useful.
Regards
Dwarak.

Down payment request on asset code(F-47)

sirs,
why cant we create down payment request for po's raised against asset code??
transaction code is f-47
if possible what is the setting to be done.
mail to
[email protected]
regards
suresh

Hi,
I am not sure of this function, but make sure thaqt you are using the correct special key, the one that you are using is for existing assets (I think) and so the system is assuming that no PO is relevant (because you already have the asset in your company).
perhaps using a different code may help?
Steve B

Down payment request for other special GL transactions

Hi ALL,
Is it possible to post down payment request for other special GL transactions?
If not , I Have a scenario that I have to generate down payment request with different alternative reconciliation accounts , but same reconciliation account.
As we cannot assign different alternative reconciliation accounts for same reconciliation account in special GL indicator "F- down payment request), how to post down payment request with different alternative reconciliation accounts?
Even though I have created different special GL indicators for different alternative reconciliations accounts with same reconciliation accounts, I couldn't post down payment request, only down payment is possible. how to solve?
regs,
ramesh b

Please do the following
1. Activate Reconciliation account ready input setting for your Main reconciliation account in FS00
2. If you dont find the setting in FS00, then you have to change FSG settings for this account group in OBD4.
3. Also assign alternative reconciliation accounts to your reconciliation account
Now system asks you to input the alternative recon account when you do the transactions.
Rgds
Murali.N

Which number range is used for down payment requests for vendors?

Hi,
Which number range is usually used for down payment requests for vendors?
I would like to use it for:
Y002 vendors (emplyees)
Y004 vendors (1-time vendors)
Y005 vendors (confidential vendors)
The invoice will be posted via FI via Tcode FB60, FB65 & FB10 and F-02.
Thank you for your feedback.
Kind regards,
Linda

Hi
For down payment request the Document type is KA hence the number range which is applicable to KA is applicable for vendor downpament also.
In your case the number range is based on document types and not related to vendor types.
Thanks
Srinivas

Gather all cost for asset under construction

Hi everybody
Please tell me the way to gather all cost for asset under construction. You can detail as good as possible.
Thanks so much
Ngocpt

Dear Ngocpt,
Internal order is functionality from CO. U can use it for the purpose of collating all the cost. U can also do cost planning in internal orders. This helps u to analyse bet planned & actual cost.
Create IO thru KO01. Once created use it in ur transactions. In your case u can use it in posting any document to AUC.
Also as I mentioned in my previous post that IO can posted with real values and statis tical values. If you want to post statistical vales only then check the box statis tical order in control data.
Whenever passing an entry put ur IO number in "order" field.
Hope this is of use to u.
Regards,
Ajay

Message no. GLT2001, New general ledger, Down payment request Fixed asset

Hi,
I have posted down payment request with target special gl indicator for fixed asset.
When I run payment program in proposal there is a mistake:
Message no. GLT2001
Diagnosis
The online document splitting is active in your system. Here, each document is assigned to a accounting transaction variant and each document row to an item category.
You determine for each business transaction variant which item categories can or must be posted here.
The following error occurred for the document you entered:
Item category 07000 in accounting transaction 1000, variant 0001 is not allowed.
Please help me with this issue

I guess you want document splitting.
So now you need to check the GL account you have, that you are trying to post to. You need to check your automatic posting settings, so do you require a BA, PC or Segment as standard in document splitting?
Whatever is required the system requires. So for example you need to make sure a default value can be worked out.
You can do this by using constants or having default entries per GL account.
Please award points if useful.

Down Payment Request for a Purchase Order Type K

I am making a down payment request to a supplier where the purchase order is of type K.
At the time of recording the payment request (A-47) the transaction meets the cost center of the purchase order and, because of having a message class (KI 281), blocks the release.
The question is:
At present the validation of the message class (OBA5) should validate the account of the purchase order or the supplier's account of the F-47?
Rgs,
Ivair

Hi
KI 281 message says that the GL account has to be created as a cost element. So, please create a cost element for the GL you are using (KA01). Hope this is the problem.
If this does not work, please let me know.
Thanks,

New Depreciation Area in Asset Master Data, for assets under construction.

Hi,
The issue is relating to New Depreciation area. We have created new Depreciation area as 80=IFRS. We had followed three steps
1. Create Depreciation area via OADB.
2. Activate Depreciation area via OAYZ.
3. Automatic opening of new depreciation are via AFBN and program RAFABNEW :-
3.1 u2013 Indicator: Leave values initial = ticked. Set this indicator if you want to open the newly created depreciation area without any values i.e. blank.
In this we have find that the old assets value has been copied. But when we are doing internal order settlement through KO88 i.e. from pre-cap to AUC we are not finding new Depreciation area 80=IFRS in AUC. We had checked in AW01N.
Letu2019s assume that creating a new deprecation area is normally not required since these assets are not depreciated. But During the final settlement, the new depreciation area should also automatically supplied with values from the reference depreciation area from the AUC(assets under construction) in the completed assets. But we doesnu2019t find any values of in Dep Key = 80 IFRS for final assets.
In Assets Class of AUC we had used Investmnet Measure as Status of AUC.
Kindly provide solution for the same.
Nikhil

Check Transfer Variant 5 (under Transactions->Intercompany Asset Transfers->Automatic Intercompany Asset Transfers->Define Transfer Variants):
5     Investment measure settlement
Your Transfer Method is most likely 1 now (without transfer to dependant areas), change it to:
4     Gross method with transfer of values to dependent areas
This should help.

Down payment request for PO

Hi Guru's,
Can anyone tell me the down payment process for Purchase order in SAP.
We have a PO which we need to make payment 50% advance and 50% after 30 days.
a. All configuration did for MM and FI
b. Payment term
c. Down payment request
d. Down payment
Thanks in advance
Deepak

Dear Anand,
Thanks for your reply. But my query is not that.
Down payment request should be generated subsequent to purchase order creation.
a. Kindly confirm whether it is manually(if so request you to provide TCode other than F-47) to be created from MM Module.
b. How to automise the payment request subsequent to purchase order.
Please help and points will defnitely be assigned.
Thanks
Deepak

Down payment request for contract with periodic billing

Hi Friends,
Could anyone help me in understanding the configuration settings for down payment / advance payment senario for a CONTRACT which has Order related billing (I have done for Order with milestone billing plan).
The contract has order related *periodic billing plan* where settlement period is suppose quaterly billing and actual invoice is happening on 1st date of the quarter. But i want to create a down payment request say 10 days before the billing date[(actual invoice(F2) date] of every quater as an advance payment/ down payment.
FYI...
For order i am using standard billing rule 1 in milestone billing plan for final invoice but for downpaymnet billing dates (added additional settlement periods then actual invoice settlement period like 3 adv pay ment og 20%, 30% 50% & one actual invoice period for whole amount 100% as D4 doc only) i am manually changing the billing rule as 4 to create a down payment req.
But in contract as its has periodic billing plan no billing rule changing option (no additional settlement period can be added, only settlement period for actual invoice is getting proposed) so i can't have two different rule for a settlement period. no settlement period can be added separately for adv paymnet/down payment.
Kindly respond ASAP.
Rgds
Manish

Hi, Many thanks for your response.
But the down payment functionality for a SO with milestone billing i have already implemented.
The question was for CONTRACT Side (say rental / service contract). The contract has periodic billing (monthly / Q'ly).
Kindly let me know if you/anyone has any idea for config settings for a contract with the senario mentioned in previous thread post.
Thnx & Rgds
MG

Down payments request for Asset Under Construction

Similar Messages

Maybe you are looking for