Assign file permissions dynamically through FTP adapter

In my composite, i have a requirement to assign the file permissions dynamically.
I know the static way of doing it is to use the property 'Permission' in the jca file of the ftp adapter.
Is there any way to pass the value to this property dynamically?
I tried using jca.ftp.Permission. but not working.
Any help on this is much appreciated.
Thanks,
Naveen Kumar T.

Hi,
The document with the properties is this... It doesn't mention any properties for permissions though...
http://docs.oracle.com/cd/E25178_01/integration.1111/e10231/adptr_propertys.htm#CHDJBDHC
Cheers,
Vlad

Similar Messages

Problem while reading multiple files through FTP Adapter

Hi,
We have a requirement to read the excel files placed in an FTP Location and as there is no Adapter to read Excel file
we are using FTP Adapter and reading the Header values of the file(name of the
file) and we are paasing as input to the Java code which will read the data nd insert into the Database.
If we place above 20 files it was reading only some files and some were left and if we delete the files and place the unread files again some files are read and if we do the same procedure then all the files were read.
Any help regaring this appreciated.
Thanks and Regards,
Nagaraju .D

Are you doing anything complex for your polling, e.g. Files that must be n time old.
Can you post the WSDL so I can see the polling configuration. I only need to see the adapter configuration, not the whole file.
cheers
James

How to set file permission using Oracle FTP Adapter

Hi,
I am using Oracle SOA Suite 11.1.1.4. I am trying to put a file using Oracle FTP adapter on unix box. The file that gets written to target system has file permission as RW/R/R. But this is a legacy system, and for them to consume this file - they expect the file permission to be RW/RW/R.
They have set the .profile with the required permissions for the ftp user account that we are using. But still when my BPEL process writes a file to unix box through ftp adapter, the file permission is RW/R/R.
Is there any way to control file permissions while writing files using ftp adapter? Any help would be highly appreciated.

907597 wrote:
But these setting needs to be done on unix server. Yes, that's the way to go... There's no config for that on FtpAdapter as far as I know...
This setting will enable the same configurations for all other ftp accounts on the server, which doesnt sound correct. Any other way of doing this? Or can this be done only for one ftp account?You have to check if your ftp server is capable of having different umask for different ftp users... I believe most do not...
http://h30499.www3.hp.com/t5/System-Administration/Setting-FTP-umask-per-user/td-p/2590101#.UMZ0TeEe7ng
Cheers,
Vlad

BPEL Process with multiple file types using one FTP adapter is not working

i created a bpel process which will fetch the files from remote location using FTP adapter.
Now the process works for only one format or file type like *.xls.
How can i use more than one file format in one FTP adapter.
OR
is there any other way to do it.
file type assignation is 5th step in FTP adapter configuration.
i have tried *.xls,*.csv and *.xls;*.csv and *.xls:*.csv by seperating with comman, colon, space... still not working.
i read the documentation *.* will not work.. for one file format it's working fine.
looking forward for reply as soon as possible.

Are you positive that it is not working? I'm not sure how you can use one FTP adapter for multiple file types unless the underlying data is exactly the same format or you are processing it as opaque data. Sometimes when a FTP adapter chokes on a file with a bad structure it doesn't create a BPEL instance, it simply moves the bad file to a separate folder.
So I assume you are using opaque as the data type instead of using an XSD element?
That said, I don't think you can put two separate file types in the filter. Is it possible for you to do something like: CommonFileName*.* or do you have similar files with other extensions?
I know the above probably isn't of much help, but I had so many problems with the FTP adapter and its lack of features that I am writing my own. Unfortunately that is a large undertaking and there isn't any good documentation of JCA resource adapter / BPEL PM integration.

How to find the File name using the FTP Adapter

hi all,
how to find the File name using the FTP Adapter with BPEL.
Regards

Found the solution for this.
First In the mediator's routing rule use assign property $in.property.jca.file.FileName to $out.property.jca.file.FileName
In the BPEL's receive activity go to the properties tab and get the property to a BPEL variable. That should do it.
Thanks for the posts

Problem Assigning file permissions on windows client

I have created some Users and Groups in the OD. I have several Windows PC's including Server 2003 installations. SMB is running and configured as "primary domain controller".
When I browse the OD from the Windows client to assign file permissions I ONLY see the USERS, not the Groups. I have Groups and Users checked in the "Locations" sub dialog.
ie. Right Click on folder to share, choose Sharing and Security, choose Permissions, choose Add, choose Advanced, choose Find. Same thing in the Security Tab. Same thing in the User manager.
This also affects the logons. I don't want to have to add each user every time I want to share or give logon permissions on the Windows client. Adding a Group is much easier.
Any suggestions?

N'<national symbols>', being part of an SQL statement, will be converted to the database character set (WE8ISO8859P1) before being parsed. Only if the client and the database are both 10.2 or higher, the client can encode the literal appropriately so that it survives this conversion.
In earlier versions, you can do the encoding yourself. Instead of the N'<national symbols>' literal use the UNISTR function: UNISTR('\xxxx\yyyy\zzzz'), where U+xxxx, U+yyyy, U+zzzz are Unicode code points of your national characters.
-- Sergiusz

Dynamic name for File through FTP Adapter

I am working on FTP Put and I have a requirement where in I have to generate the file with dynamic content in its name.I should actually embed a Purchase Order number in that file name follwed by a sequence number.I dont need any time stamp.Should I create a variable for this?
Help in this regard would be highly appreciated.

Hi,
you have to enable the adapter specific parameter --> file name in both the sender and the receiver CC to get the input file name as output file name.
Refer this blog:
/people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14
Also you need to use this udf
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
String ourSourceFileName = conf.get(key);
return ourSourceFileName;
Also refer this blog:
/people/william.li/blog/2006/04/18/dynamic-configuration-of-some-communication-channel-parameters-using-message-mapping
Regards,
Nithiyanandam

Dynamic file name creation using FTP adapter wired from a mediator

Hi All,
My Requirement is as follows....
Mediator is wired to Three FTP adapters to create three files.
File names are dynamic.
In the mediator those three routings, mappings and assignment for the directory and file name are being created.
But out of 3 files, 2 files are being created with the names mentioned during the FTP adapter configuration and the last one is being created
with the dynamic value.
Any help in this regard is highly thankful.
Thank you.
Srivatsasa.

Create a UDF in mapping taking counter from IDoc as input parameter
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
String totalFilename = "AAAA_" + counter;
conf.put(key,totalFilename);
return totalFilename;
Map output of this UDF to Top node at target.
you will not be able to see the result in test tab of mapping but it works end to end
Select Adapter Specific Message Attributes in receiver file adapter..here select filename checkbox

Error while reading files through FTP Adapter

Hi,
I am using FTP Adpater to read files and archive in local folders.
But i got the following errors when i deployed the process:
<2008-12-18 13:48:31,140> <INFO> <default.collaxa.cube.activation> <File Adapter
::Inbound> Connection Created
<2008-12-18 13:48:31,390> <ERROR> <default.collaxa.cube.activation> <File Adapte
r::Inbound> Unable to get Binary file '/MySharedFolders/abc/AAAA_TT_
Trrrrplan Bireeee Baaaa? ??ketmmllri Ltd.?ti._4673651.pdf'; FTP command RETR returned unexpe
cted reply code : 550
<2008-12-18 13:48:44,156> <INFO> <default.collaxa.cube.activation> <File Adapter
::Inbound> Managed Connection Created
<2008-12-18 13:48:44,156> <INFO> <default.collaxa.cube.activation> <File Adapter
::Inbound> Processer thread calling onFatalError with exception Error getting bi
nary file from FTP Server.
Unable to get binary file from server.
Check the error stack and fix the cause of the error. Contact oracle support if
error is not fixable.
<2008-12-18 13:48:44,156> <FATAL> <default.collaxa.cube.activation> <AdapterFram
ework::Inbound> [Get_ptt::Get(opaque)]Resource Adapter requested Process shutdow
n!
Please help me out on this issue.
Thanks,
Synthia

Hi James,
We have upgraded to 10.1.3.4. but still we could not read the file. the problem is, it could not read the file names contains with UTF-8 characters.
error is below:
<2009-12-01 15:43:33,109> <INFO> <default.collaxa.cube.activation> <FTP Adapter:
:Inbound> Managed Connection Created
<2009-12-01 15:43:33,109> <INFO> <default.collaxa.cube.activation> <FTP Adapter:
:Inbound> Connection Created
<2009-12-01 15:43:38,406> <ERROR> <default.collaxa.cube.activation> <FTP Adapter
::Inbound> Unable to get Binary file '/MySharedFolders/Invoice History/EMEA_TR_B
imta?-Bo?aziτi Peysaz ?n?aat Mⁿ?avirlik Teknik Hizmetler A?aτ Sanayi ve Ticaret
Anonim ?irketi_44596501.pdf'; FTP command RETR returned unexpected reply code :
*550*
<2009-12-01 15:43:51,156> <INFO> <default.collaxa.cube.activation> <FTP Adapter:
:Inbound> Processer thread calling onFatalError with exception Error getting bin
ary file from FTP Server.
Unable to get binary file from server.
Check the error stack and fix the cause of the error. Contact oracle support if
error is not fixable.
<2009-12-01 15:43:51,156> <FATAL> <default.collaxa.cube.activation> <AdapterFram
ework::Inbound> [Get_ptt::Get(opaque)]*Resource Adapter requested Process shutdow*
n!
Thanks you.

How to change the JCA JNDI dynamically using FTP Adapter

We have 5 FTP Servers, each having a directory to poll. We have created 5 CCI instances for these FTP Adapters in the FTPAdapter deployment. We created a BPEL process and using FTP Adapter to connect to above mentioned servers.
Question: Customer's requirement is to use a single BPEL process to poll all these FTP Servers at a specified date and time. How can we connect dynamically to each FTP server at specified time.
(OR)
Is there any way to change the JCAJNDI dynamically in a FTP Adapter configuration ?
I have seen that FTP Adapter POLL doesnt take any JCA JNDI/hostname/un/pwd/date/time dynamically.
Regards
Pavan

Hi Pavan,
It's possible to change the JNDI dynamically but only when you use put operation where you can control the JNDI name at the time of invoking the FTP Adapter as described in below link.
Dynamic JNDI in FTP Adapter | jca.jndi property not picked by Adapter
However, can you consider using BPEL process with SyncRead (and read files through all the JNDIs in a loop) and scheduling this BPEL process to a desired frequency?
Regards,
Neeraj Sehgal

Get the File Name received from FTP Adapter

Hi,
How to get the File name reived through the FTP Adpater. I have created a variable with the Message type from ftpAdapterinboundheader.wsdl. from there I mapped the filename attribute to a local string variable.
But I did not receive the file name. The output in the Audit trail is as follows:
<?xml version="1.0" encoding="UTF-8" ?>
- <Invoke_File_Process_FileProcess_InputVariable>
- <part xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" name="InputParameters">
- <InputParameters xmlns="http://xmlns.oracle.com/pcbpel/adapter/db/PIERS/SP_FILE_PROCESS_UPDATE/">
<AS_DIR xmlns="">I</AS_DIR>
<AS_FILE_NAME xmlns="" />
</InputParameters>
</part>
</Invoke_File_Process_FileProcess_InputVariable>
Can any one let me know how to get the recevied file name from FTP adapter.
Thanks

you have to define variable of type InboundHeader_msg. Then in receive activity click on Adapter tab and for header variable chose your newly created variable (InboundHeader_msg). Once you receive message from FTP you should see in this variable fileName.

Processing a CSV file in batching by FTP Adapter gives translation error

Hi All,
I have a CSV with 2000 records.. want to process it in batch of 500.
When i dont use batching in FTP adapter.. everything goes fine.
But when i include batching in the adpater.. and try to process the same file. it gives:
<2009-09-09 12:09:15,997> <ERROR> <VDSTServices.collaxa.cube.translation> <NXSDTranslatorImpl::logError> translateFromNative Failed with exception = 50
<2009-09-09 12:09:15,997> <INFO> <VDSTServices.collaxa.cube.activation> <FTP Adapter::Inbound> Error while translating inbound file : VDST_CNP_EMR5110026_20090904_000000.csv
<2009-09-09 12:09:15,997> <INFO> <VDSTServices.collaxa.cube.activation> <FTP Adapter::Inbound>
ORABPEL-11100
Translation Failure.
[Line=27, Col=1] Translation from native failed. 50.
Check the error stack and fix the cause of the error. Contact oracle support if error is not fixable.
     at oracle.tip.pc.services.translation.xlators.nxsd.NXSDTranslatorImpl.doTranslateFromNative(NXSDTranslatorImpl.java:754)
     at oracle.tip.pc.services.translation.xlators.nxsd.NXSDTranslatorImpl.translateFromNative(NXSDTranslatorImpl.java:489)
     at oracle.tip.adapter.file.inbound.ProcessWork.doTranslation(ProcessWork.java:748)
     at oracle.tip.adapter.file.inbound.ProcessWork.processMessages(ProcessWork.java:336)
     at oracle.tip.adapter.file.inbound.ProcessWork.run(ProcessWork.java:218)
     at oracle.tip.adapter.fw.jca.work.WorkerJob.go(WorkerJob.java:51)
     at oracle.tip.adapter.fw.common.ThreadPool.run(ThreadPool.java:280)
     at java.lang.Thread.run(Thread.java:595)
Caused by: java.lang.ArrayIndexOutOfBoundsException: 50
     at oracle.tip.pc.services.translation.xlators.nxsd.ErrorList.addError(ErrorList.java:108)
     at oracle.tip.pc.services.translation.xlators.nxsd.NXSDTranslatorImpl.terminateLoop(NXSDTranslatorImpl.java:1688)
     at oracle.tip.pc.services.translation.xlators.nxsd.NXSDTranslatorImpl.parseNXSD(NXSDTranslatorImpl.java:1307)
     at oracle.tip.pc.services.translation.xlators.nxsd.NXSDTranslatorImpl.parseNXSD(NXSDTranslatorImpl.java:1216)
     at oracle.tip.pc.services.translation.xlators.nxsd.NXSDTranslatorImpl.parseNXSD(NXSDTranslatorImpl.java:1084)
     at oracle.tip.pc.services.translation.xlators.nxsd.NXSDTranslatorImpl.doTranslateFromNative(NXSDTranslatorImpl.java:706)
     ... 7 more
I tried deleting the rows 24-28 from the CSV and process again.. again got the same error [Line=27, Col=1] .. so its not an issue with CSV.
Please suggest.
Thanks

Can you publish or pass your csv and the native schema you are using. Please also mention your soa version. thx.

Garbage name of the Archive File while using the FTP adapter

Hello All
I am using Oralcle FTP adapter to poll a file ,after polling I am deleting the file from the current directory and
archiving it into another directory.
Problem is after archiving the file into the another dirctory name of the is fine changed as follows :
d2wXEgGZrfypNsGa15uzOA==_20081015_082233_0015
I want same name for the archived file as orginal file with timestamp
Please help to solve this problem.
Thanks
Satendra Pare

You cannot change the file name in the save dialog, it always uses the originally file name of the form.
But you can use scripting to save a form under another name.
Sample.
http://thelivecycle.blogspot.com/search/label/Save

Processing files in Sequence using FTP Adapter

Hi Experts,
I have searched several forums but i am not clear on how to process the files using FTP Adapter based on Timestamp.
To process the files in sequence i.e, FIFO using FTP Adapter
i have the files with file name customer and timestamp : customer<yyyyMMddHHmmss>
there are around 50 files in the FTP server llike this.
I need to process these files acording to the timestamp and place the files in same processing sequence in the receiver end using the file adapter.
If i specify the parametes in sender FTP Adapter as
Qos= EOIO
Queue name = ACCOUNT
Whether these parameters would do the processing in sequence according to the Timestamp?
Suppose if the queue ID for Inbound(SMQ2) is XBTI0_ACCOUNT then whether it will be the same for Outbound(SMQ1)?
Kindly suggest me how to process the files in sequence according to the Timestamp using FTP Adapter
Please reply..
Thanks
Sai

Hi Shabarish,
But this would require one more additional channel to process
So i think it will take more time to process.
Let me clarify my question once again.
I need to Pick the files from FTP server based on their TimeStamp and in sequence.
the file names are like this Customer<YYYYMMDDHHmmSS>.
suppose i have 3 files as
Customer20050413044534
Customer20050414053430
Customer20050315034533
So i need to pick these files in this order and place the files in the same order to the receiver end(File Adapter)
Customer20050315034533
Customer20050413044534
Customer20050414053430.
As i am using FTP sender adapter i cannot use processing sequence "By Date".
please suggest me on this.
Thanks
Sai.

Zero byte files not transferred with FTP Adapter

All,
I am seeing that zero byte files are not being transferred using FTP Adapter (SFTP type). Is there a known bug around this? Please respond if anybody have seen this behavior and resolved this issue. I am using 10.1.3.3.0
Thanks,
Dipal

Thanks Marc,
I still have doubt if that is the case. When I tested the same from 10.1.3.3.1 windows platform and FTP being windows OS zero bytes files transferred OK. Do you think this is to do with OS or SOA version?
Thanks,
Dipal

Assign file permissions dynamically through FTP adapter

Similar Messages

Maybe you are looking for