Assign forms to Message type reg.

Hi
Can anyone please explain the difference between the assignment of FORMS to MESSAGE TYPE between the following two options.
1.SPRO>MM->Purchasing->Messages>Assign form for messges.
2.SPRO-->MM->Purchasing->Messages->Output control->Message types for PO->Processing routine
Thanks in advacne,
Regards,
Sasi

1.SPRO>MM->Purchasing->Messages>Assign form for messges.
In this step you are assgining the form and program to output type and medium
2.SPRO-->MM->Purchasing->Messages->Output control->Message types for PO->Processing routine
Same will defulat here except the step you need to define for Fine-Tuned Control: Purchase Order

Similar Messages

Release? while assigning Z Message Type to a Standard SAP IDOC Basic type

Hi Experts,
Am trying to assign a custom Message Type to a Standard SAP IDOC Basic type in WE82 transaction, but am not sure How to find the Release(last column of WE82 Tx)? Pls. let me know.
Thank you

Hello,
In case of IDOC, Go to Transaction WE30, type your IDOC name & select basic type & extension.
After that select Go to -> Header data (Shift+F7), you will Idoc header info. In the same pop-up you will find IDOC release for which version.
Regards,
Sameer

How to know the function module for a message type

hi sd gurus,
how can i know the function modules used ( based on message type can i know it?) in inbound idoc processing.
can anyone let me know where can i find it out and the related transaction codes
Thanks&Regards
Srini

You can find out the Functionmodule if you know the message type.
Go to WE20, find the message type for hte relevant partner type by clicking the partner type and then clicking one partner int hat partner type.
Now on the right hand side, you will get a screen. Based on whether it is your outbound IDOC or ibound, click the relevant parameters, select the message type and double click.
In the new screen open the Message control tab and fidn out the process code of the IDOC.
Now go to WE41 if ur IDOC is outbound or WE42 for inbound IDOC.
Search for the process code which is assigned to the message type in WE20.
Double click the process code, you will see the relevant function module in the 3rd field.
Hope thsi helps you
Pls reward if it helps.

Shipment IDOC basic type TPSSHT01 Message type SHIPPL

Hi,
I tried changing the shipment to add a delivery to the shipment using a bapi. I have successfully added the delivery but INbound IDOC but finally i ended up in error in the idoc stating "Transportation planning point has no partner for transportatn. planning"
please let me know where am goin wrong.
Thanks,
Prem.

Hi Sravan ,
WE82 is used for - Assigning Message type to IDOC . Here only we assigned this WMTORD message type to IDOC (DELVRY03).
We have warehouse , we need to send the WMTORD ( Transport order ) to Warehouse . Then they can process the picking , packing , shipping and loading and send the materials to customers . After completion of all process , they(WMS team) will send the WMTOCO ( Transport confirmation ) to us .Then We will generate the Invoice based on TO and purchase Order .
My requirement : Now , The warehouse team needs the delivery date also should include in WMTORD message .
But i looked in all segments in DELVRY03 idoc , i didn't find any element belongs the delivery date .
Please advice me and help on this same

Multiple message types for an idoc type

Hi all,
I created one custom idoc type with six segments. I heard that one idoc type can have any number of message types
if it is so pls tell me how to assign these two message types for my idoc .
i want to create multiple message types because i want to send same idoc type to diff legacy systems.
My requirement is message type one is only for first three segments and message type two is for another three segments .
The outbound program 1 for mess type 1 should fill fill the data for only first three segments and second outbound program corresponding to mess type 2 should fill the data for last three segments
how should i design for my requirement. suppose if the idoc has two message types then it has two outbound programs?

Hi Kunal,
Below are my thoughts from a design perspective,
My requirement is message type one is only for first three segments and message type two is for another three segments .
The outbound program 1 for mess type 1 should fill fill the data for only first three segments and second outbound program corresponding to mess type 2 should fill the data for last three segments
Before you look upon the no. of message types you need, i guess you need to look at the business requirement. Per your requirement you want to send send two sub sets of data. The first subset in the first 3 segments and other three segments for the second subset of data.
Is the structure of the first subset of data similar to the second subset If not, better to create two IDOC Types. If they are similar, then create one IDOC Type with three segments and have two message types for each subset of data.
For Ex: ORDERS05 is the IDOC type for Orders, this IDOC type provides capability to carry data related to any type of orders
but the action on the data is facilitated by the message type like ORDERS for create, ORDCHG for change, ORDRSP for Order response etc.
OR
Are these two subsets of data related to each other, if yes understand the relation? If not related at all then you might be better of creating two separate IDOC Types.
Like in the above example A purchase order is related to a sales order so you can use the same IDOC type, but in case of a order response and ASN that data sent is different and hence you will need different IDOC types (even though a SO is related to a DN).
how should i design for my requirement. suppose if the idoc has two message types then it has two outbound programs?
The above again depends on the how tightly/loosely coupled are the data sets, you can have just one program and have a simple case statement on the message types or have two different programs.
You will also have to consider points like, if any of the subsets is more prone to more change in terms of the structure and associated business logic. If yes, then you might want to keep the programs separate to reduce work on regression testing etc.
I am sure you will receive more inputs from the experts on the forum and the list of points to look for will get longer , so understand the requirement, dependencies and if you have any specific questions you could post it on the forum.
Regards,
Chen

Idocs multiple message types

Hi all,
I created one custom idoc type with six segments. I heard that one idoc type can have any number of message types
if it is so pls tell me how to assign these two message types for my idoc .
i want to create multiple message types because i want to send same idoc type to diff legacy systems.
My requirement is message type one is only for first three segments and message type two is for another three segments .
The outbound program 1 for mess type 1 should fill fill the data for only first three segments and second outbound program corresponding to mess type 2 should fill the data for last three segments
how should i design for my requirement. suppose if the idoc has two message types then it has two outbound programs?
Edited by: kunal kakkar on May 16, 2011 10:21 AM
Moderator message: duplicate post locked.
Edited by: Thomas Zloch on May 16, 2011 12:39 PM

COND_A01 is the IDoc to distribute the condition master data. Sales order (ORDERS05) is transactional data. It is not feasible to generate a master data IDoc from a sales document. Even if it was feasible, what would be the purpose? The master data hasn't changed, why would anyone want to send it again with every order?

Error In MIGO "Could not determine recipients for message type ACPJMM"

Dear all,
At the time of transaction Goods Receipt(MIGO), I am getting the error message "Could not determine recipients for message type ACPJMM".
System Diagnosis is as below
An IDoc of message type ACPJMM was passed to the ALE layer, but the three receiver fields in the header record were not filled. In this case the ALE layer tries to determine the receivers from the entries in the distribution model. There are no entries available in the distribution model for the above message type
I have check the ALE Settings in we20 and we21
and have assigned the following message types under Logical syste Partner Type
Outbound
ACPJMM
MATMAS
MBGMCR
RSINFO
RSSEND
WHSORD
Inbound
ACPJMM
DEBMAS
FTDABA
FTDACO
FTDACU
INSPECTIONPLAN_CREATE
MATMAS
MBGMCR
RSRQST
WHSCON
I have also created and Assigned a Logical System to the client and have also created a RFC with the same name
I have checked all settings is SALE and they are Fine.
This is a single system
Please help this is really ugrent
Regards
Suhail John

Hi,
Goto table TRWCA (T Code SE30) and deselect all the checked entries.
This should solve your problem.
Regards,
Priyadarshi

IDOC as a message type

Hi,
can any one please tell me weather IDOC can be used as a message type or not?
Best Regards,
Anuj

hi,
an idoc name is formed from: message type, idoc type and optional extension.
you can import the structure of the idoc in the repository. the message type will be the root tag of the xsd/xml.
and afterwards you can use it as an interface

Resources for designing data types and message types

Hi
I wanted to know if anyone can recommend me some good resources which can explain the design considerations for designing data types and message types in XI which can help promote reusability.
Thanks.
Best Regards,
Kiran

hi,
there no rare rule whe you define your data type, why i tell you this, because you define a data type since the documentation that sender sistem team gives to you. so you only have to copy this structure to PI.
now about Message Type less problems, because, you a Data type is assign to a Message Type, whats it means.
when you define a DATA type you are defining the structure of you XML, que you assing the data type to a message type this structure pass to be an xml document.
Thanks you
Rodrigo

Assign an output type to a message type

Hi all,
How do I assign an output type to a message type?
Thanks in advance.
JM

You maintain the output type determination settings for the inbound and outbound delivery handlers, so that output types can be determined for deliveries, pursuant to the message control mechanism.
<b> a. You maintain the output types in Customizing for Logistics - General ->upply Chain Planning Interfaces (SCPI)-> Auto-ID Backend Integration->IDoc Processing ->Operational IDocs -> Output Type Determination -> Output Type Determination for Inbound/Outbound Deliveries-> Maintain Output Types</b>.
reward points if it is usefull....
Girish
<b></b>

How to use PO message type to output 'Form' as PDF file

Dear experts,
I am working for a topic of how to use PO message type to output 'Form' as 'PDF file', and save to external file system automatically.
Any one familiar to this topic, please kindly give me some guide, thank you!
Regards,
Joyce

Hi,
Go through the program RSTXPDFT4 (Converting SAPscript (OTF) or ABAP List Spool Job to PDF), you will get some idea. Using this program you can convert spool into PDF file.
-Alpesh

Can we assign same basic type to different message type in ALE

Hi Expert
can we assign same idoc type to different message type?

Hi,
Yes you can assign the one idoc type to multiple message type. Message type nothing but it represents the kind of data we transfer.But idoc type is the format in which we transfer data. As an example in Messager types "ORDERS" and "ORDRSP" both indicates the order related data, and in both case idoc type can be ORDERS01, ORDERS02.............
Thanks,
Asit Purbey.
Edited by: Asit Purbey on Oct 12, 2009 3:07 PM

How to assign different Message Type to different Doc. Types

Hi,
Can anyone tell me how can I assign different Message Type to different Doc. Types e.g. in ME21N. So that whenever the Doc Type is selected the respective Message Type is automatically assigned.
Lucky

hi there
follow this path
spro - materials management - purchasing - messages - output cntrol - message types - define message types for p/o
then
spro - materials management - purchasing - messages - output cntrol - message determination schemas - define message determination schemas for purchase order
then
go to
mn04
give doc type - enter
enter partner role & other parametrs

Assigning element in xsd to message type

Hi!
I have a problem in assigning an element in a xsd file to a new message type. When I create a variable with this message type, an error, unresolved message type, is raised. Can anyone help me, please ? I tried all the possible ways (that I know) to make that work but at compilation, the same error appears.
Thanks in advance!!!!

Thank you for the reply. I tried again but it still doesn't work.
Here is the wsdl :
<definitions
name="testDiap"
targetNamespace="http://xmlns.oracle.com/testDiap"
xmlns="http://schemas.xmlsoap.org/wsdl/"
xmlns:ns2="http://xml.zoppas.com/Dates"
xmlns:plnk="http://schemas.xmlsoap.org/ws/2003/05/partner-link/"
xmlns:client="http://xmlns.oracle.com/testDiap"
>
<types>
<schema attributeFormDefault="qualified" elementFormDefault="qualified" targetNamespace="http://xmlns.oracle.com/testDiap"
xmlns="http://www.w3.org/2001/XMLSchema"/>
<schema xmlns="http://www.w3.org/2001/XMLSchema">
<import namespace="http://xml.zoppas.com/Dates" schemaLocation="dates.xsd"/>
</schema>
</types>
<message name="datesMessage">
<part name="datesPart" element="ns2:CommessaDates"/>
</message>
</definitions>
Here is the bpel file :
<process name="testDiap" targetNamespace="http://xmlns.oracle.com/testDiap"
xmlns="http://schemas.xmlsoap.org/ws/2003/03/business-process/"
xmlns:xp20="http://www.oracle.com/XSL/Transform/java/oracle.tip.pc.services.functions.Xpath20"
xmlns:bpws="http://schemas.xmlsoap.org/ws/2003/03/business-process/"
xmlns:ns1="http://xmlns.oracle.com/pcbpel/adapter/aq/Dequeuer/"
xmlns:ldap="http://schemas.oracle.com/xpath/extension/ldap"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:ns2="http://xml.zoppas.com/Dates"
xmlns:client="http://xmlns.oracle.com/testDiap"
xmlns:bpelx="http://schemas.oracle.com/bpel/extension"
xmlns:ora="http://schemas.oracle.com/xpath/extension"
xmlns:orcl="http://www.oracle.com/XSL/Transform/java/oracle.tip.pc.services.functions.ExtFunc">
<partnerLinks>
<partnerLink myRole="Dequeue_role" name="getDetails"
partnerLinkType="ns1:Dequeue_plt"/>
</partnerLinks>
<variables>
<variable name="Receive_1_Dequeue_InputVariable"
messageType="ns1:CommessaData_msg"/>
********This is the problem.This line is showed as error when compiling.*********
<variable name="Variable_1" messageType="client:datesMessage"/>
</variables>
<sequence name="main">
<receive name="receiveDetails" partnerLink="getDetails"
portType="ns1:Dequeue_ptt" operation="Dequeue"
variable="Receive_1_Dequeue_InputVariable" createInstance="yes"/>
</sequence>
</process>
Type error :
Error(37):
[Error ORABPEL-10007]: unresolved messageType
[Description]: in line 37 of "D:\Commessa_integration\testDiap\testDiap\testDiap.bpel", WSDL messageType "{http://xmlns.oracle.com/testDiap}datesMessage" of variable "Variable_1" is not defined in any of the WSDL files.
[Potential fix]: Make sure the WSDL messageType "{http://xmlns.oracle.com/testDiap}datesMessage" is defined in one of the WSDLs referenced by the deployment descriptor.
Here are the steps I followed:
- Import the dates xsd file
- create a new message type, datesMessage with part name = datesPart and set as element CommessaDates that is in the xsd.
- create a new variable in the bpel process. Set message type = datesMessage
I do not understand what is wrong. As you can see the namespaces seem ok.

HCM Processes & Forms - Message Type is unknown

Hi,
I have created an HCM process using HCM P&F framework. I can test the process from the ""Test Process" application on the ECC and it works fine. When I launch the process from the portal, I can see the adobe form correctly, the "Check and Send" also goes through fine, but when I click on send I get this error:
Error when processing your request
What has happened?
The URL http://xxxxxxxxxx:8000/sap/bc/webdynpro/sap/ASR_PROCESS_EXECUTE// was not called due to an error.
Note
The following error text was processed in the system SE1 : Message type is unknown.
The error occurred on the application server xxxxxxxx_SE1_00 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: IF_POBJ_CASE~CREATE_CASE of program CL_POBJ_CASE==================CP
Method: CREATE_LEVEL_DB of program CL_POBJ_LEVEL=================CP
Method: FLUSH_LINKED_LEVEL of program CL_POBJ_LEVEL=================CP
Method: FLUSH_COMMON of program CL_POBJ_LEVEL=================CP
Method: IF_POBJ_LEVEL_TRANS_HANDLING~FLUSH of program CL_POBJ_LEVEL=================CP
Method: IF_POBJ_LEVEL_TRANS_HANDLING~FLUSH of program CL_POBJ_LEVEL=================CP
Method: IF_POBJ_LEVEL_TRANS_HANDLING~FLUSH of program CL_POBJ_LEVEL=================CP
Method: IF_POBJ_LEVEL_TRANS_HANDLING~FLUSH of program CL_POBJ_LEVEL1================CP
Method: IF_POBJ_PROCESS_OBJECT~FLUSH of program CL_POBJ_PROCESS_OBJECT========CP
Method: SAVE of program CL_HRASR00_PROCESS_RUNTIME====CP
Has anyone else encountered this issue?
Thanks & regards,
Manish

Hi,
I have created an HCM process using HCM P&F framework. I can test the process from the ""Test Process" application on the ECC and it works fine. When I launch the process from the portal, I can see the adobe form correctly, the "Check and Send" also goes through fine, but when I click on send I get this error:
Error when processing your request
What has happened?
The URL http://xxxxxxxxxx:8000/sap/bc/webdynpro/sap/ASR_PROCESS_EXECUTE// was not called due to an error.
Note
The following error text was processed in the system SE1 : Message type is unknown.
The error occurred on the application server xxxxxxxx_SE1_00 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: IF_POBJ_CASE~CREATE_CASE of program CL_POBJ_CASE==================CP
Method: CREATE_LEVEL_DB of program CL_POBJ_LEVEL=================CP
Method: FLUSH_LINKED_LEVEL of program CL_POBJ_LEVEL=================CP
Method: FLUSH_COMMON of program CL_POBJ_LEVEL=================CP
Method: IF_POBJ_LEVEL_TRANS_HANDLING~FLUSH of program CL_POBJ_LEVEL=================CP
Method: IF_POBJ_LEVEL_TRANS_HANDLING~FLUSH of program CL_POBJ_LEVEL=================CP
Method: IF_POBJ_LEVEL_TRANS_HANDLING~FLUSH of program CL_POBJ_LEVEL=================CP
Method: IF_POBJ_LEVEL_TRANS_HANDLING~FLUSH of program CL_POBJ_LEVEL1================CP
Method: IF_POBJ_PROCESS_OBJECT~FLUSH of program CL_POBJ_PROCESS_OBJECT========CP
Method: SAVE of program CL_HRASR00_PROCESS_RUNTIME====CP
Has anyone else encountered this issue?
Thanks & regards,
Manish

Assign forms to Message type reg.

Similar Messages

Maybe you are looking for