How to assign different Message Type to different Doc. Types

Hi,
Can anyone tell me how can I assign different Message Type to different Doc. Types e.g. in ME21N. So that whenever the Doc Type is selected the respective Message Type is automatically assigned.
Lucky

hi there
follow this path
spro - materials management - purchasing - messages - output cntrol - message types - define message types for p/o
then
spro - materials management - purchasing - messages - output cntrol - message determination schemas - define message determination schemas for purchase order
then
go to
mn04
give doc type  - enter
enter partner role & other parametrs

Similar Messages

  • How to assign the same GTIN for different material?

    Hi,
    I've managed to install an internal number assignment for the GTIN / EAN in material master which works fine.
    Now we need to assign the same GTIN to different material numbers. 
    Since the defined number range is marked as internal I cannot use this number range as the external number range in spro -> Define Attributes of EANs/UPCs (number categories/EAN categories):
    I cannot make an external number range with the same data as the internal one, since number ranges must not overlap.
    So, here is the question again:
    How can I achieve that 1. the GTIN is generated and 2. a GTIN, which is already assigned to another material, can be entered manually in the GTIN field?
    Any advice is appreciated,
    thanks,
    Marco.

    1. the GTIN is generated
    This should be "external" number range only.
    2. a GTIN, which is already assigned to another material, can be entered manually in the GTIN field?
    We can enter manually or thru' upload during master data creation provided number range is "external"(refer point no.1 above)
    Unable to understand that why you need same GTIN in two different articles?
    Request to understand the business process once again as this leads to confusion reg. inventory, PDC and PoS dumping.

  • How to indicate a message by a planning function type in an ABAP-OO-Class

    Hello,
    I integrated a message with following statement " MESSAGE i003(upf1) WITH v1 v2." in an ABAP-OO-Class, which is used by a Planning Function Type. The function type works but it´s not indecated after executing the Planning Sequence, neither from web template nor in the planning modeller.
    Does anybody know this problem/behavior?
    Thank for response
    Andreas

    Hi Joerg,
    how about this:
    data: l_dummy type char100.
    MESSAGE i003(upf1) WITH v1 v2  into l_dummy.
    i_r_msg->add_msg( ).
    You do not need to take special care about the variables. Just raise the message as you want it to be raised. The only thing you need to do is to raise the message into a string (..into l_dummy). The interface IF_RSPLFA_MSG and the implemetation of add_msg is going to read the standard message variables (SY-MSGNO, SY-MSGID, SY-MSGTY, MSGV1 ...). You just need to throw the message
    and call  i_r_msg->add_msg( ) e.g. in the execute method of your customer planning function.
    Please give it a try and take a look at it in the debugger.
    Hope this helps.
    Matthias Nutt
    SAP Consulting Switzerland

  • Acct assignment to be restricted based on Doc type

    Dear All
    I need to restrict Account assignments based on Document types,
    As of my knowledge there is not standard customizing possible.
    But i can restrict Acct assignment based on Item catregory. But this settings doesn't satisfy my requirement,
    I would like to know is there any standard customizing or any user exit availble .
    Kindly let me know
    Thanks & regards
    Madhesh Kumar

    hi,
    there is no sap standard  customising for this please go ahead with user exit in PO.
    create an doc type.
    when you select the perticular doc type system should take default account assignment.
    regards

  • How to count FI documents according to its doc type?

    Hello everybody,
    The following posting is about ways to count FI documents according to its doc type, company code and year.
    At first, I was said that there is the table NRIV, wich gives the info when set with the 'object' parameter RF_BELEG. From this extract I can get the number of the last FI doc posted according to its CC, doc type and year. However, I am still missing the info when the doc type is 'external'. Could you see a solution?
    Thanks!
    Stan B

    hi Stan,
    go to SE16, enter BKPF, enter the document type you want to know (and company code and fiscal year and whatever) and click on Number of entries.
    hope this helps
    ec

  • FI doc type(ex.MM doc type)  not display Report FMAVCR01

    Hi Experts,
    I have to control FMAVCR01 Report display that
    FI doc type(Blart type - WZ (MM doc)  transfer posting is not included in the output.
    How to control display fi Doc type at FMAVCR01?
    Thanks for your answers

    Hi,
    FMAVCR01 is the report for displaying consumtion in AVC budget ledgers. If the documents in question were included in budget consumption, the FMAVCR01 will show them. So, the question is whether you simply don't display this consumption or you don't want these documents to consume the budget. In the first case, you will have to define your own report; in the second case, you have to modify the derivation logic for controlling objects in AVC.
    Regards,
    Eli

  • Where do I find what Billing Document Type to Sales Doc Type is associated

    Good Afternoon
    Where in the configuration do I find how the Billing Document Type to Sales Document Type is mapped to each FI Document type?
    I thought I would find it under VTFA, VTFL and  VTFF
    Your help is greatly appreciated!

    Hi,
    In SD module, when you configure the flow of documents, i.e. Sales Order -> Delivery -> invoice, or Sales Order -> Invoice the rules of copying data from one document to another are defined.
    There are two fields, that are visible in FI documents to configure:
    a) the allocation number
    b) The reference number
    in both fields following values can be pass from SD to FI:
    A. Customer Purchase Order number
    B. Sales Order number
    C. Delivery number
    D. External delivery number
    E. Actual invoice number
    If those fields (ore one of them) are left blank, then no data is being passed to FI. This is situation, when you dont have any data in FI document. In such cases you should contact your SD coleague and ask to configure with respective document.
    I hope, it clarifies the situation (As far as I understood your last post).
    regards,
    wojciech

  • How to assign 1 position to 2 different senior positions.

    Hi All,
    please guide me how to maintain reporting of one position to multiple senior positions.
    My Client has  requirment  that some of the positions report to the VP & to the CEO as well, & i have to distribute the reposting percentage also for the same.
    How to go about it.can you all please guide me.

    Hi,
    Yes, there are a few more steps that you have to take before you can use the Matrix structure.  First, you have to define the relationship between the CEO and the individuals reporting.  You can use any of the standard relationships in table T778V or create your own.  Then you have to create an evaluation path to include this new relationship (T788A).  Finally, you can define a Matrix Type (table T779M - transaction 009M) with the objects, relationships and evaluation paths you created. 
    To assign the matrix relationship, go to the Easy Access: Human Resources --> Organizational Management --> Organizational Plan --> Matrix --> Change (PPME).  Here you can select your matrix type and assign the Positions that should have this relationship. 
    So Martix is the answer, but there are several steps to take before you can make this work.  The key is defining the exact relationship you want the various positions to have with the position of CEO. 
    Paul

  • Re: How to Assign Alternate Print Drivers in Different Versions of Windows.

    For Windows 7, there is no "Advanced Tab" in the "Properties" box. I have searched now - for almost 2-hours - trying to find out how to install a new / different driver for the HP Officejet 4620.

    You have to select "Printer Properties" not "Properties" by itself.
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

  • How to View Outlook Messages in Timezone different from the Systems Time.

    Hi Team,
    My Name is Abhishek. I am from India.
    I just want to know one thing related to MS Outlook 2007 Version.
    To deal with Hongkong customers and to work in database we have kept the systems time as HongKong Time (GMT + 07: 30) in my official Laptop.
    So. when I receive any email in the Inbox it shows the message received time in Hong Kong Time which is the systems Time right now.
    But As I stay in India, I just want to see my all Outllook received Messages in Indian Time (GMT + 05: 30), without disturbing the systems time.  I just get confused when I receive any email and it shows in systems Hong Kong Time.
    Is it possible to change my outlook message receiving display time to Indian time without disturbing my systems time...If so, pls help me by telling the procedure how to do it...
    Thanking You
    Abhishek

    Hi Abhishek:
    There are no
    Daylight saving time for  HongKong Time Zone and also for the Indian Time, so the checkbox will be greyed out.
    As
    Nezer mentioned above: “Adjusting the time zone in outlook also alters the system time, I think outlook is design to always mirror the time zone of you system clock.” We couldn’t change
    this within Outlook.
    Thanks for your understanding.

  • How to deliver a message to a different domain like yahoo?

    how can i do that? i already have everything setup (like user, clients.etc).
    im running on windows server 2003 with edirectory.
    Please help me!!

    Originally Posted by Bob-O-Rama
    Yes, you need a domain to get mail from the outside world. So visit Go Daddy and register your domain, and have them host your DNS. In their DNS control panel, you would setup A records for your GWIA, like mail.yourdomain.com. And MX records which point to that host. This tells the outside world where to send mail addressed to yourdomain.com.
    After you confirm DNS is working ( may take a day after provisioning with the registrar ), on the GW side you would configure, at the POA or MTA level, the internet domain name you created.
    Novell Doc: GroupWise 7 Doc - Table of Contents
    Most of the stuff related to Internet mail is here:
    Novell Doc: GroupWise 7 Administration Guide - Internet Agent
    -- Bob
    can i use a sub domain name?
    If now where can i get a free domain?
    can i host my own domain?

  • Different Partner Determination  based on doc types

    I have got access to SAP Cloud for customer solution. I needed to define two document types for Opportunity which i can do in Fine tune activity of project scope.
    However, unlike Onpremise CRM there is no way in cloud for assigning different Partner Determination procedures to these document types in cloud ? I am just getting the feeling that we need to write to write a lot of code to manage this what could have been std. configuration provided by SAP like Onpremise SAP systems.
    Is the above true or my fears are unfounded ? How can this be best achieved.
    -Apoorva

    Hi Apoorva,
    As of now we can only define multiple Transaction Types trough customizing but cannot tweak the partner determination.
    It helps in configuring few things like Activity Advisor, Reason for Win/Loss etc but Partner Determination is not an option provided to us in cloud trough configuration like in Standard CRM as on date.
    May be in future when it is inevitable they will give this feature because it does not really makes sense giving an option to create multiple Transaction Types just for categorizing things when it can do more.
    You can any way raise an incident to SAP and they might suggest you any solution/alternative or redirect you to SAP Service Center which might be chargeable.
    Regards
    Vinod

  • Different message strams to different SOA composites?

    I have the feeling that all inbound message streams are delivered to the same internal, AQ and JMS channel - I hope I am wrong.
    If this is the case and I have multiple SOA Composites in 11g, which include an inbound B2B Adapter, will all of them receive all streams of messages?
    If only one of teh multiple SOA Composites will, then which one will it be?
    If I can specify, per trading partner agreement / trading partner, which SOA composite will ge the stream of messages, what and how will I configure t do this?
    Thanks in advance for pointing me at the appropriate material
    Regards
    Michael

    Hello Michael,
    In the absence of an explicit internal channel the IP_IN_QUEUE (AQ) and B@B_IN_QUEUE (JMS) will both receive each message, right? If there is no consumer these messages will be discarded, right?No. Either of AQ queue or JMS queue can be active at a time. By default AQ queue reamains active. So B2B polls IP_OUT_Queue for outbound messages and passes inbound messages to IP_IN_Queue. If you want to activate JMS queues then you have to set B2B system parameter "Use JMS Queue as default" to true. If this option is set to true, then B2B starts to poll on the JMS queue, B2B_OUT_QUEUE for outbound messages, and delivers all inbound messages to B2B_IN_QUEUE. Polling on IP_OUT_QUEUE is stopped. To know more about this setting please refer user guides below section -
    http://download.oracle.com/docs/cd/E14571_01/integration.1111/e10229/bb_config.htm#CEGEADFJ
    In 11g R2 there is a "default" channel as well, which eliminates the nees to use the AQ and JMS as means of interaction between the B2B and teh SOA Composite. It shows up as a "B2B Adapter" in a SOA Composite and acts as an adapter.For integrating B2B with SOA composite, there is a B2B adapter. You may integrate B2B with SOA composite in three ways -
    1. Default
    2. AQ
    3. JMS
    This integration is descibed in detail in user guide at below link -
    http://download.oracle.com/docs/cd/E14571_01/integration.1111/e10229/intro_ui.htm#CHDDJIFC (section 2.5 Using Oracle B2B in the Oracle JDeveloper Environment)
    For routing purpose (routing all messages with the same document routing ID to one SOA composite), you may use Document Routing ID. Use of Document routing ID is defined here -
    http://download.oracle.com/docs/cd/E14571_01/integration.1111/e10229/b2b_documents.htm#CHDHBDEI (section 7.10 Using Document Routing IDs)
    Please go through above links once. You may also use Fusion Order demo to understand it in a better way. Section 2.5.3 The B2BX12OrderGateway Composite in the Fusion Order Demo, defines it's use -
    http://download.oracle.com/docs/cd/E14571_01/integration.1111/e10229/intro_ui.htm#CHDDJIFC
    These are newbe questions, since I am a newbe. The B2B User's Guide is not clear on this.A person with more than 28 years of experience in IT, can never be a newbie. It's my pleasure to answer your questions and I hope I am able to do so. :)
    Regards,
    Anuj

  • MM-Restrict particular Mat type for specific Doc type

    How to restrict particular material type in particular Purcharasing document type...

    Go to OMS2 and Select Material type and in Internal / External Purchase Orders and in External Purchase Order tab Set the Value 0 No External Purchase Orders allowed and Save.
    I dont know how far we can Control this for a Particular Document type.
    Coz if you Set this this will be applicable to all Purchaisng Documents

  • How to forward message to two different queue using jms proxy service

    Hi all,
    In my project I need to listen to one jms queue then forward the messages to two different queue.
    Now I already made one proxy for listening to the queue then pass it to another queue using business service, It works.
    But how to forward the messages to two different queue in same flow process using one proxy and bs??
    or any other way?
    Really thanks in advance.
    Regards,
    Kahlil

    Hi,
    I have a MQ queue and i created a Proxy to listen to the queue , but i dont see any activity in OSB logs ..how do i knw if OSB proxy is polling that MQ ( mq is the transport protocol that i am using ) .
    Thanks
    Prarthana.

  • BI IP: How to create a message in custom developed planing function type

    Hello experts,
    I try to set a message in a ABAP planning function.
    I created a own planning function type and implemented the class in ABAP.
    Everthing is working fine until here. But how can I create a message which is visible in the report.
    Is it just to use the command " MESSAGE" ?
    Or do I have to use paramteres of the ABAP class.
    I've just implemented the interface IF_RSPLFA_SRVTYPE_IMP_EXEC and cannot find parameters for this.
    Thanks in advance
    Johannes

    Hi Johannes,
    please check
    Custom Messages WAD
    Re: How to indicate a message by a planning function type in an ABAP-OO-Class
    Regards Matthias

Maybe you are looking for

  • Problem in reading a file in the specified format

    Hi, I want to read a .txt file using the bufferedreader() but the text displayed in the console doesnot show data in new lines though there are multiple lines in the text file.It shows the content of the file in one line. ex: file.txt 1. Here 2. Is t

  • Use of External tables to load XML data.

    Hi, I have used external table definitions to load various XML files to the database, usually splitting the XML into seperate records - 1 per major element tag, and using PL/SQL to parse out a primary key to store in a relational table with all of th

  • Server 2012 R2 DC and File Server on the same server

    alexthefourth wrote: what i plan on doing is running esxi as the hypervisor and running a vm with server 2012 r2 and another server with windows 7 due to a fax application not being able to run on server editions. You can still run two Windows 2012R2

  • User Rights Regarding Voicemail Deletion

    As Microsoft has decided without our approval or notice, to prevent our deletion of and hold onto our personal and business voicemail for an indefinite period for their own direct access and review, I have decided to register formal complaints with t

  • Exporting Snapzpro tutorial for web, help!?

    I recently finished a 6 part tutorial for a clients website using snapzpro and graphics from Motion. I agreed to do the project if I could hand over compressed Quicktime files directly to their web guy. Now they think that none of their customers hav