ASSIGN_LENGTH_0

I am getting a short dump ASSIGN_LENGTH_0 ,
program error - Assign with length 0 in program SAPLSNR3
while installing Business content.  I have selected in data flow before and after
Can anyone tell what this error relates to.

SP Levels..?

Similar Messages

  • Run time error ASSIGN_LENGTH_0

    Hi All,
    When i'm loading delta pakage to Info cube I'm getting short dump as ASSIGN_LENGTH_0. Short txt as Program error: ASSIGN with length 0 in program "SAPLSNR3".
    Error Analysys as
    An ASSIGN statement in the program "SAPLSNR3" contained a field symbol with
    length 0. This is not possible.
    length 0.
    This is not possible.
          Es wurden entsprechend viele Nummern gezogen
          Returncode berechnen
        CASE SY-SUBRC.
          WHEN 0.
               alles ok
            P_RETURNCODE = SPACE.
          WHEN 1.
               Nummern sind im kritischen Bereich
            P_RETURNCODE = '1'.
          WHEN 2.
               Das war die letzte Nummer
            P_RETURNCODE = '2'.
            IF NOT TNRO-NONRSWAP IS INITIAL.
            MESSAGE E028 WITH BNRIV-FROMNUMBER BNRIV-TONUMBER
                              P_OBJECT RAISING INTERVAL_OVERFLOW.
            ENDIF.
          WHEN 3.
               Es werden mehr Nr. verlangt, als noch vorhanden sind
            P_RETURNCODE = '3'.
            IF NOT TNRO-NONRSWAP IS INITIAL.
            MESSAGE E028 WITH BNRIV-FROMNUMBER BNRIV-TONUMBER
                              P_OBJECT RAISING INTERVAL_OVERFLOW.
            ENDIF.
        ENDCASE.
          Nummernstand dem Aufrufer zurückgeben
        G_NR_LENGTH = STRLEN( BNRIV-FROMNUMBER ).
        G_OFFSET    = 20 - G_NR_LENGTH.
          Funktionsbaustein kann beendet werden
    The termination was occured as in underlined
    Can u please help on this issue.
    Thanks in advance

    Hi Reddy,
    At the same time in joboverview of source system i'm getting
    tRFC: Data Package = 1, TID = 8D7A5FB00007457E3AE10308, Duration = 00:00:50, <b>ARFCSTATE = SYSFAIL</b>
    Thanks for ur responce.
    Regards,
    Kishore

  • Runtime Errors         ASSIGN_LENGTH_0

    Hello Experts,
    This is the problem which has occurred during upgrade from 4.6 to ecc 6.0.
    Runtime Errors         ASSIGN_LENGTH_0                                                             
    Date and Time    03/05/200                                                                               
    Short text                                                                               
    Program error: ASSIGN with length 0 in program "ZSD00371".                                                                               
    What happened?                                                                               
    Error in the ABAP Application Program                                                                               
    The current ABAP program "ZSD00371" had to be terminated because it has                       
         come across a statement that unfortunately cannot be executed.                                
         Tried to create a field with length 0. This is not                                            
         possible.                                                                               
    Error analysis                                                                               
    In an ASSIGN statement in the program "ZSD00371" a field symbol with                          
         length 0 should have been created. However, this is not possible.                             
         length 0.                                                                               
    This is not possible.                                                                               
    Please suggest the solution.
    Thanks.

    Please suggest.
    FIELD-SYMBOLS: <C>,                    " Cust# allocation field
                   <M> type ANY,                    " Material# allocation field
                   <P>.                    " Plant allocation field
    START-OF-SELECTION.
          PERFORM SET_BATCH_HEADING.
    SELECT * FROM STXH WHERE TDOBJECT = 'TEXT'
                        AND   TDID     = '7014'
                        AND   TDSPRAS  = 'E'.
         IF SY-SUBRC = 0.
           PERFORM EXTRACT_CUST_DATA.
         ENDIF.
      ENDSELECT.
    END-OF-SELECTION.
    SORT RTAB BY KUNNR WERKS MATNR.
    LOOP AT RTAB.
    AT NEW KUNNR.
    PERFORM GET_CUST_DATA.
    IF V_LOEVM NE 'X'.                   " Exclude customers marked for del
    ULINE.
    OKUNNR = RTAB-KUNNR.
    WRITE:/1 'Customer:',11 OKUNNR,23 NAME.
    WRITE:/23 CTYST.
    ULINE.
    ENDIF.
    ENDAT.
    IF V_LOEVM NE 'X'.                   " Exclude customers marked for del
    OWERKS = RTAB-WERKS.
    OMATNR = RTAB-MATNR.
    WRITE:/1 'TEXT KEY :',RTAB-TDNAME.
    WRITE:/1 'SHIP POINT:',13 OWERKS,19 RTAB-PNAME,61 'MATERIAL:',
           71 OMATNR,RTAB-MAKTX.
    WRITE:/1 'TEXT:', RTAB-TEXT.
    ULINE: /1(25).
    TCOUNT = TCOUNT + 1.
    ENDIF.
    AT END OF KUNNR.
    IF V_LOEVM NE 'X'.                   " Exclude customers marked for del
    ULINE:/1(50).
    WRITE:/1 '|',
    3 TCOUNT NO-ZERO,'Text Items defined for this Customer',50 '|'.
    ULINE:/1(50).
    SKIP 2.
    CLEAR TCOUNT.
    ENDIF.
    ENDAT.
    ENDLOOP.
    TOP-OF-PAGE.
       PERFORM BATCH-HEADING(RSBTCHH0).
    *&      Form  EXTRACT_CUST_DATA
    FORM EXTRACT_CUST_DATA.
    CLEAR: POS,NEXTO,PLENGTH,STRLEN,CUST,MATERIAL,PLANT.
    CLEAR RTAB.                            " Init RTAB
    RTAB-KUNNR = '0000000000'.
    RTAB-MATNR = '000000000000000000'.
    RTAB-WERKS  = '0000'.
    Determine the length of the field.
    CALL FUNCTION 'STRING_LENGTH'
         EXPORTING
              STRING = STXH-TDNAME
         IMPORTING
              LENGTH = STRLEN.
    Get Customer number
    SEARCH STXH-TDNAME FOR '_'.
        IF SY-SUBRC = 0.
           POS  = SY-FDPOS.
           ASSIGN  STXH-TDNAME+1(POS) TO <C>.
           PERFORM SET_CUST_NUM.
    Get Material number
      NEXTO = POS + 1.               " Find next Offset position
      POS = POS + 2.                 " Incr. 1 position past '_'
    SEARCH STXH-TDNAME FOR '_' STARTING AT POS.
        IF SY-SUBRC = 0.
           POS  = SY-FDPOS.
           ASSIGN  STXH-TDNAME+NEXTO(POS) TO <M>.
    Error is coming here.........
           PERFORM SET_MATERIAL_NUM.

  • Runtime Error COPA Report KE30  - Assign_Length_0

    Dear users,
    As ABAP is unknown terrain for me, I stumbled upon an error which I can't seem to bypass.  I do not know wheter this is the right forum to ask the question, so if I'm wrong, please do correct me.
    Current situation
    1. I've added a user def COPA Characteristic to the operating concern X.
    2. I've made a realignment run to fill table CE40001 (prof segments)
    3. Ive created a report (with form) where the report uses the field (point 1) as a drill down object.
    When running this report, I immediatly get the error 'Assign length 0' - in program "SAPMKCBE", module "SEIG_POSITIONIEREN"
    When looking at the error it stumbles at understanding code.  It seems that
    1. looking for value in table  'field_tab', which is CE10001
    2. field "Reffl"
    But as I've checked the table, this field does not exist.  So this is where I'm stuck;
    Allready thanks for any help that you can provide!
    Ben
    74           IF SY-SUBRC EQ 0.
    75             IF L_S_LCOL_CHAR-DIMPR EQ DIMPR_L  OR
    76                L_S_LCOL_CHAR-DIMPR EQ DIMPR_KL OR
    77                L_S_LCOL_CHAR-DIMPR EQ DIMPR_LK.
    78               IF FIELD_TAB-FIENM NE SEIG-FNAM.
    79                 READ TABLE FIELD_TAB WITH KEY
    80                                      FIENM = SEIG-FNAM BINARY SEARCH.
    81               ENDIF.
    82               I = FIELD_TAB-REFLL.
    83               ASSIGN FELD1(I) TO <TEXT>.                   "#EC *
    84             ELSE.
    85               ASSIGN FELD1(20) TO <TEXT>.
    86             ENDIF.

    I found the issue regarding this problem. In customizing for the COPA characteristics, you have to define the default display for this characteristic in the COPA Report. This option can be set to "Long Text".
    As it seems, this field is (in my case) not activated, and it can't be activated.  Nor can it be maintained.
    As a result the report searches for 'long text - REFLL' which doesn't exist.
    solution:
    Change default view for the characteristic AND completly rebuild your report.  Since SAP doesn't read this value (default dispay) dinamicly, but only once while creating the report.
    regards and thanks for no help
    hope I could be of assistance to anybody else

  • Error in Activating the Business Content Infocube 0CRM_C08

    Hi Experts,
    when iam trying to activating the business content infocube 0CRM_C08
    iam getting few errors
    Error-1:- Characteristic 0COUNTY_CDE is still being used as target of transfer rule ZCOUNTY_TEXT
    Error-2:- Char. 0CRM_OBTYP3 is exclusively an attribute (cannot be a navigation attribute)
    Error-3:- Authorization field CRM_SALORG still being used in authorization objects
    Error-4:- Cannot delete authorization field of InfoObject 0CRM_SALORG
    Error-5:- InfoObject ZDGTDCODE is used in transfer rules (1CL_OMAT001_BB) of characteristic 0MATERIA
    Can anyone please clarify regarding these kind of errors.
    What i have to do for make a successfull activation
    Thanks in Advance
    ARUN

    Hi Raj,
    I have searched for those objects in the BI content for activating those objects, but those objects are not available in the BI content.
    In general while activating the info cube if any object is in inactive means we will activate the object seperatly and we will activate the info cube it will resolve the issue. but here those 0DB-- objects are not available in the BI content.
    While activating the sales and inventory info cube it was throughing the short dump, In the short dump it is showing these message.
    ASSIGN_LENGTH_0 " "
    SAPLSNR3 or "LSNR3F01"
    LOCAL_BUFFER
    please treat this as urgent.
    Thanks
    Prabhakar.

  • ERROR while activating the Business Content of Sales Cube 0SD_C03

    Hi,
    iam facing an error, iam getting the  error while activating the Business Content sales info cube and Inventory info cube with the collection option DATA FLOW BEFORE. In my system the service pack was 14, what shall be the approach. Here iam getting the error like some 0DB--  objects are not available in the D version. if u have any solution for this please share with use also.
    Please treat this as an urgent, because we are unable to proceed with the further Business Content Activation.
    Thanks,
    Prabhakar.

    Hi Raj,
    I have searched for those objects in the BI content for activating those objects, but those objects are not available in the BI content.
    In general while activating the info cube if any object is in inactive means we will activate the object seperatly and we will activate the info cube it will resolve the issue. but here those 0DB-- objects are not available in the BI content.
    While activating the sales and inventory info cube it was throughing the short dump, In the short dump it is showing these message.
    ASSIGN_LENGTH_0 " "
    SAPLSNR3 or "LSNR3F01"
    LOCAL_BUFFER
    please treat this as urgent.
    Thanks
    Prabhakar.

  • ERROR with Source System in BI

    Hi,
    I replicated the datasources from DEV to BI. They replicated just fine. I can even see it in BI. I then tried to activate the datasource (i created the datasource from a view ) but it gave me a run time error :
    ASSIGN_LENGTH_0 Short dump has not been completely restored..too big.
    I then tried to go into the source system and tried to activate that and it said:
    Source System DEV300 is inactive
    BI Unknown in system
    BI IDoc type ZSBC019 is not the same as source system IDoc type
    The following errors occured in the source syaytem:
    Entry in inbound table not found
    Entry in outbound table not found
    Result of the destination check: No authorization to logon as trusted system
    What could have went wrong?
    Thanks

    Did you try activating the source system in RSA1 ..right click and choose active.
    if this doesnt work then you might want to check the inbound and outbound entries in we20 transaction code for the source system. If you have authorization. Or you need to check with your BASIS to set that up for you.

  • ABAP Dump ASSIGN LENGTH 0 SAPLSNR3 LOCAL Buffer - BI content installation

    Hi all,
    I get the following ABAP dump while installing the BI content and choosing the grouping ' in dataflow before' in Bi 7.0 SP 13
    Short text                                                             
        Program error: ASSIGN with length 0 in program "SAPLSNR3".                                                                               
    Error analysis                                                                     
         In an ASSIGN statement in the program "SAPLSNR3" a field symbol with           
         length 0 should have been created. However, this is not possible.              
         length 0.  This is not possible     s                                                                               
    Trigger Location of Runtime Error                                                  
         Program                                 SAPLSNR3                               
         Include                                 LSNR3F01                               
         Row                                     178                                    
         Module type                             (FORM)                                 
         Module Name                             LOCAL_BUFFER                           
    How to correct the error                                                             
        If the error occurred in your own ABAP program or in an SAP                      
        program you modified, try to remove the error.                                                                               
    If the error occures in a non-modified SAP program, you may be able to           
        find an interim solution in an SAP Note.                                         
        If you have access to SAP Notes, carry out a search with the following           
        keywords:                                                                               
    "ASSIGN_LENGTH_0" " "                                                            
        "SAPLSNR3" or "LSNR3F01"                                                         
        "LOCAL_BUFFER"                                                                               
    I did search for the same error discussion in the forum. However most of them are dealing with "LOCAL_ENTRY_EXISTS" while this dump is related to "LOCAL_BUFFER".
    Kindly let me know if anyone has similar issue and got it resolved.
    Thanks in advance
    Kee

    For  anyone who come across the same error - here is the solution.
    Assign the number ranges for  objects
    BI_TS , BI_TSDTEL, BI_TSDOMA and BI_CS  in tcode SNUM as below
    No. From Number  To Number      Currenct Number
    01    0000000001    9999999999    1
    You can surpass this error.
    Thanks
    Kee

  • Install Business content Infosource 2LIS_11_VAHDR on BI

    Hello,
    When i try to Install the Business content Infosource 2LIS_11_VAHDR grouping function I am selecting "In Dataflow Bfr and Aft"
    In the left side under Infosource I selected 2LIS_11_VAHDR then the system is connecting to source system then I have to enter my user name and password then system asking you want to check you have full authorization I selected Yes.
    after few seconds i got runtime error message:
    Runtime Errors         ASSIGN_LENGTH_0
    Date and Time          07/18/2008 22:36:54
    Short dump has not been completely stored (too big)
    Short text
    Program error: ASSIGN with length 0 in program "SAPLSNR3".
    What happened?
    Error in the ABAP Application Program
    The current ABAP program "SAPLSNR3" had to be terminated because it has
    come across a statement that unfortunately cannot be executed.
    Tried to create a field with length 0. This is not
    possible.
    Error analysis
    In an ASSIGN statement in the program "SAPLSNR3" a field symbol with
    length 0 should have been created. However, this is not possible.
    length 0.
    This is not possible.
    Trigger Location of Runtime Error
    Program                                 SAPLSNR3
    Include                                 LSNR3F01
    Row                                     178
    Module type                             (FORM)
    Module Name                             LOCAL_BUFFER
    Source Code Extract
    Line
    SourceCde
    148
    ID 'NONRSWAP' FIELD TNRO-NONRSWAP.
    149
    IF SY-SUBRC < 4.
    150
          Es wurden entsprechend viele Nummern gezogen
    151
          Returncode berechnen
    152
    CASE SY-SUBRC.
    153
    WHEN 0.
    154
               alles ok
    155
    P_RETURNCODE = SPACE.
    156
    WHEN 1.
    157
               Nummern sind im kritischen Bereich
    158
    P_RETURNCODE = '1'.
    159
    WHEN 2.
    160
               Das war die letzte Nummer
    161
    P_RETURNCODE = '2'.
    162
    IF NOT TNRO-NONRSWAP IS INITIAL.
    163
    MESSAGE E028 WITH BNRIV-FROMNUMBER BNRIV-TONUMBER
    164
    P_OBJECT RAISING INTERVAL_OVERFLOW.
    165
    ENDIF.
    166
    WHEN 3.
    167
               Es werden mehr Nr. verlangt, als noch vorhanden sind
    168
    P_RETURNCODE = '3'.
    169
    IF NOT TNRO-NONRSWAP IS INITIAL.
    170
    MESSAGE E028 WITH BNRIV-FROMNUMBER BNRIV-TONUMBER
    171
    P_OBJECT RAISING INTERVAL_OVERFLOW.
    172
    ENDIF.
    173
    ENDCASE.
    174
    175
          Nummernstand dem Aufrufer zurückgeben
    176
    G_NR_LENGTH = STRLEN( BNRIV-FROMNUMBER ).
    177
    G_OFFSET    = 20 - G_NR_LENGTH.
    >>>>>
    ASSIGN BNRIV-NRLEVEL+G_OFFSET(G_NR_LENGTH) TO <G_F>.
    179
    P_NUMBER = <G_F>.
    180
          Funktionsbaustein kann beendet werden
    181
    P_EXIT = YES.
    182
    EXIT.
    183
    184
    ELSEIF SY-SUBRC = 4.
    185
          Das Intervall wurde nicht gefunden
    186
    MESSAGE E751 RAISING INTERVAL_NOT_FOUND WITH P_OBJECT P_SUBOBJECT
    187
    P_NR_RANGE_NR TNRO-CODE.
    188
    ELSEIF SY-SUBRC = 19.
    189
          Der Nummernkreis ist nicht intern
    190
    MESSAGE E752 RAISING NUMBER_RANGE_NOT_INTERN.
    191
    ELSEIF SY-SUBRC = 15.
    192
          Overflow
    193
    IF NOT TNRO-NONRSWAP IS INITIAL.
    194
    MESSAGE E028 WITH BNRIV-FROMNUMBER BNRIV-TONUMBER
    195
    P_OBJECT RAISING INTERVAL_OVERFLOW.
    196
    ENDIF.
    197
    ELSEIF SY-SUBRC = 11.
    Why I am getting this error message
    Thanks

    Roshan, Try the following steps again
    1) Activate the Datasource in LBWE on ECC.
    2) Replicate the Datasources.
    3) Find the datasource and try to edit it. If the infosource is not installed it will try to install again.

  • Infocube 0SD_C03 Installation problem

    Hi All,
    I am trying to install infocube 0SD_C03 (sales overview).
    When I click grouping and select 'In Data Flow Before' it goes on well and a pop up comes saying 'Remote activation in Source System' and when I click 'OK' my R/3 source system comes up and asks for a login. Once I login the installation continues, but after a minute it throws me a abap dump as follows.
    Runtime Errors         ASSIGN_LENGTH_0
    Date and Time          05.09.2007 10:28:25
    Short dump has not been completely stored (too big)
    Short text
         Program error: ASSIGN with length 0 in program "SAPLSNR3".
    What happened?
         Error in the ABAP Application Program
         The current ABAP program "SAPLSNR3" had to be terminated because
         come across a statement that unfortunately cannot be executed.
         Tried to create a field with length 0. This is not
         possible.
    Error analysis
         In an ASSIGN statement in the program "SAPLSNR3" a field symbol
         length 0 should have been created. However, this is not possible
         length 0.
         This is not possible.
    Trigger Location of Runtime Error
         Program                                 SAPLSNR3
         Include                                 LSNR3F01
         Row                                     178
         Module type                             (FORM)
         Module Name                             LOCAL_BUFFER
    I am not able to install this cube. Please help me to find a solution.
    I am using NW04s and stack level is latest.
    Regards
    Renjith

    Hi, Keerthika,
    I have updated SAP BW support pack 13 and 14 then the issue got resolved.
    Hope this helps.
    Reward points is usefull.
    Regards
    Renjith

  • About CATS attachment

    Hi gurus,
    I am having a problem with the CATS approval workflow.When clicking on the attachment of  the workflow we are getting a short dump.
    Short text
    Program error: ASSIGN with length 0 in program "SAPLSWOT".
    What happened?
    Error in the ABAP Application Program
    The current ABAP program "SAPLSWOT" had to be terminated because it has
    come across a statement that unfortunately cannot be executed.
    Tried to create a field with length 0. This is not
    possible.
    What can you do?
    Note down which actions and inputs caused the error.
    To process the problem further, contact you SAP system
    administrator.
    Using Transaction ST22 for ABAP Dump Analysis, you can look
    at and manage termination messages, and you can also
    keep them for a long time.
    Error analysis
    In an ASSIGN statement in the program "SAPLSWOT" a field symbol with
    length 0 should have been created. However, this is not possible.
    length 0.
    This is not possible.
    How to correct the error
    If the error occurred in your own ABAP program or in an SAP
    program you modified, try to remove the error.
    If the error occures in a non-modified SAP program, you may be able to
    find an interim solution in an SAP Note.
    If you have access to SAP Notes, carry out a search with the following
    keywords:
    "ASSIGN_LENGTH_0" " "
    "SAPLSWOT" or "LSWOTU02"
    "SWO_DIALOG_OBJECT_KEY_EDIT"
    If you cannot solve the problem yourself and want to send an error
    notification to SAP, include the following information:
    1. The description of the current problem (short dump)
    To save the description, choose "System->List->Save->Local File
    (Unconverted)".
    2. Corresponding system log
    Display the system log by calling transaction SM21.
    Restrict the time interval to 10 minutes before and five minutes
    after the short dump. Then choose "System->List->Save->Local File
    (Unconverted)".
    3. If the problem occurs in a problem of your own or a modified SAP
    program: The source code of the program
    In the editor, choose "Utilities->More
    Utilities->Upload/Download->Download".
    4. Details about the conditions under which the error occurred or which
    actions and input led to the error.
    System environment
    SAP-Release 700
    Application server... "mednswn014"
    Network address...... "192.168.1.114"
    Operating system..... "Windows NT"
    Release.............. "5.2"
    Hardware type........ "4x AMD64 Level"
    Character length.... 16 Bits
    Pointer length....... 64 Bits
    Work process number.. 0
    Shortdump setting.... "full"
    Database server... "MEDNSWN014"
    Database type..... "MSSQL"
    Database name..... "ECD"
    Database user ID.. "ecd"
    Char.set.... "C"
    SAP kernel....... 700
    created (date)... "Jan 29 2007 00:36:16"
    create on........ "NT 5.2 3790 Service Pack 1 x86 MS VC++ 14.00"
    Database version. "SQL_Server_8.00 "
    Patch level. 95
    Patch text.. " "
    Database............. "MSSQL 7.00.699 or higher, MSSQL 8.00.194"
    SAP database version. 700
    Operating system..... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2"
    Memory consumption
    Roll.... 16192
    EM...... 4189840
    Heap.... 0
    Page.... 16384
    MM Used. 1700672
    MM Free. 2486544
    User and Transaction
    Client.............. 111
    User................ "T_MGR_2"
    Language key........ "E"
    Transaction......... "SWO_ASYNC "
    Program............. "SAPLSWOT"
    Screen.............. "SAPMSSY0 1000"
    Screen line......... 6
    Information on where terminated
    Termination occurred in the ABAP program "SAPLSWOT" - in
    "SWO_DIALOG_OBJECT_KEY_EDIT".
    The main program was "SWO_CALL_METHOD_ASYNC ".
    In the source code you have the termination point in line 68
    of the (Include) program "LSWOTU02".
    we are using the workflow
    TS20000460.
    It's very urgent.

    Hi experts,
    I had the same problem with standard object BUS2028 (Material Inventory).
    I re-generated the object in development system in SWO1 transaction and the problem got solved (in development system). But the issue is that the client has MANY systems, and I dont think I will be able to re-generate in all systems, specially in productive system....
    I was not asked for any transport request when re-generating.... How can I get the "re-generation" moved to other systems? Is there any way to include a standard business object in a transport request? or howelse?
    I've also been looking for some OSS note for this but didn't find anything....
    Hope you can help me!
    Thanks,
    Daniela

  • BI Content Install SHORT DUMP

    HELP!
    I am trying to install BI Content on a newly installed netweaver Box.  We are running BI 7.0 with SP 15 and BI_CONT 703 SP 5.  This is the error:
    Runtime Errors         ASSIGN_LENGTH_0
    Date and Time          2008/02/18 12:55:36
    Short dump has not been completely stored (too big)
    Short text
         Program error: ASSIGN with length 0 in program "SAPLSNR3".
    What happened?
         Error in the ABAP Application Program
         The current ABAP program "SAPLSNR3" had to be terminated because it has
         come across a statement that unfortunately cannot be executed.
         Tried to create a field with length 0. This is not
         possible.
    Error analysis
         In an ASSIGN statement in the program "SAPLSNR3" a field symbol with
         length 0 should have been created. However, this is not possible.
         length 0.
         This is not possible.
    Trigger Location of Runtime Error
         Program                                 SAPLSNR3
         Include                                 LSNR3F01
         Row                                     178
         Module type                             (FORM)
         Module Name                             LOCAL_BUFFER
    Line  SourceCde
      148                  ID 'NONRSWAP' FIELD TNRO-NONRSWAP.
      149   IF SY-SUBRC .
      180 *       Funktionsbaustein kann beendet werden
      181     P_EXIT = YES.
      182     EXIT.
      183
      184   ELSEIF SY-SUBRC = 4.
      185 *       Das Intervall wurde nicht gefunden
      186     MESSAGE E751 RAISING INTERVAL_NOT_FOUND WITH P_OBJECT P_SUBOBJECT
      187                                    P_NR_RANGE_NR TNRO-CODE.
      188   ELSEIF SY-SUBRC = 19.
      189 *       Der Nummernkreis ist nicht intern
      190     MESSAGE E752 RAISING NUMBER_RANGE_NOT_INTERN.
      191   ELSEIF SY-SUBRC = 15.
      192 *       Overflow
      193         IF NOT TNRO-NONRSWAP IS INITIAL.
      194            MESSAGE E028 WITH BNRIV-FROMNUMBER BNRIV-TONUMBER
      195                           P_OBJECT RAISING INTERVAL_OVERFLOW.
      196         ENDIF.
      197   ELSEIF SY-SUBRC = 11.

    Problem:
    When trying to collect BI objects prior to installing (activate) for use in BI (TCODE: RSA1) a short dump would be thrown when 'in and out' objects were selected. No short dump was thrown for demo objects when source system was set to local.
    Reason:
    The objects tracking sequence numbers for incoming BI transports from external systems were not correctly set. The sequences should have been set with a valid range of 1 to 9999999999 however the sequences were either missing or set to 0. This was a problem with the BI server (EPSAND), the CRM server was functioning correctly.
    Why this happened:
    Unknown. Perhaps a bug in a service pack. This error appears to be very uncommon. The error being thrown was a generic error thus difficult to trace to the actual problem.
    How the problem was fixed:
    (1) Using TCODE: SNUM set intervals for objects: BI_TS, BI_TSDTEL, BI_TSDOMA and BI_CS. These objects should each be set as follows:
    No. From Number To Number Currenct Number
    01 0000000001 9999999999 1
    (2) Then there was also a second unrelated bug which is fixed in latest SAP_BW support package (SP 0014, released: January 2008). We couldn't risk the support package so a single note: 1102743 was applied.

  • Load hierarchy through flat file

    I am trying to load a hierarchy through a flat file and followed the SDN blog mentioned below.
    Hierarchy Upload from Flat files
    However, I get this runtime error while loading.
    Runtime Error          ASSIGN_LENGTH_0
    Information on where terminated                                           
         The termination occurred in the ABAP program "SAPLRRSV" in            
          "RRSV_INT_CHA_VAL_SPLIT".                                            
         The main program was "RSABW_START_NEW ".                                                                               
    The termination occurred in line 42 of the source code of the (Include)
          program "LRRSVU10"                                                   
         of the source code of program "LRRSVU10" (when calling the editor 420).
                                                                                    Source Code Extract                                                                               
    Line  SourceCde                                                                               
    12 *"     VALUE(E_CHAVL_EXT) TYPE  RSD_CHAVL_EXT                       
        13 *"     VALUE(E_T_DEP) TYPE  RRSV_T_DEP                              
        14 *"  EXCEPTIONS                                                      
        15 *"      UNKNOWN_CHANM                                               
        16 *"      UNKNOWN_INFOCUBE        
       17 *"----
       18                                                                    
       19   DATA: l_s_cob_pro  TYPE rsd_s_cob_pro.                           
       20   DATA: l_t_cob_pro_cmp TYPE rsd_t_cob_pro.                        
       21   DATA: l_subrc      LIKE sy-subrc.                                
       22   DATA: l_offset     TYPE i.                                       
       23   DATA: l_s_dep      TYPE rrsv_s_dep.                              
       24                                                                    
       25   FIELD-SYMBOLS: <chavl>.                                          
       26                                                                    
       27   IF i_very_internal = rs_c_true. "SB                              
       28     i_with_const = rs_c_true.     "SB                              
       29   ENDIF.                          "SB                              
       30                                                                    
       31   PERFORM cob_pro_cmp_get USING i_infocube i_chanm                 
       32                        CHANGING l_t_cob_pro_cmp                    
       33                                 l_subrc.                           
       34   IF NOT l_subrc IS INITIAL.                                       
       35     PERFORM raise USING rs_c_false l_subrc i_chanm space.          
       36   ENDIF.                                                           
       37                                                                    
       38   l_offset = 0.                                                    
       39                                                                    
       40   LOOP AT l_t_cob_pro_cmp INTO l_s_cob_pro.                        
       41     IF i_with_const = rs_c_true OR l_s_cob_pro-chaconst IS INITIAL.
    >>>>>       ASSIGN i_chavl_int+l_offset(l_s_cob_pro-intlen) TO <chavl>.  
       43       IF l_s_cob_pro-iobjnm = i_chanm.                             
       44         IF     <chavl> IS INITIAL                                  
       45             OR <chavl> EQ rsd_c_initial.                           
       46           IF i_very_internal = rs_c_true.

    Hi,
      This is Thilak. For loading Data To hierarchy from flat file u should follow the below steps.
    1. Create info objects as per ur hierarchy structure. i.e., ZH_CNO( for cno), ZH_SRGN (for region) .
    2. find the highest node level info object. i.e., ZH_CNO.
    3. go to that info object (highest node level info object) and select "with hierarchy" chk box.
    4. click on " MAINTAIN HIERARCHY" button and move the external characteristics info objects to rt. side pannel.i.e., ZH_SRGN.
    (Hint : other than first and last node level characteristics)
    5. Activate the info object.
    6. Create the info source (ZH_IS) of " DIrect Update Type".
    7. Assign Hierarchy Data source( ZH_CNO_HIER) to that info source.
    8. Schedule the info package to load the hierachy data from flat file.
    Note: If u have any doubts regarding flat file format and hierarchy structure plz call to +91 9600015640 or mail to thilak.oggn@gmail. bcz i am unable to draw that hier strtr ana table.
    Edited by: thilak. neelam on Oct 24, 2008 1:44 PM
    Edited by: thilak. neelam on Oct 24, 2008 1:52 PM

  • Short dump while loading Hierarchy flat file

    Hi gurus,
    i am trying to load data from flat file to hierarchy, when i am trying to schedule the InfoPackage its giving message  a dump :-
    "ASSIGN_LENGTH_0" C     
    "SAPLRRSV" or "LRRSVU10"
    "RRSV_INT_CHA_VAL_SPLIT"
    These are the steps i followed.
    1 created a ZINREGION
    2. enabled hierarchy of ZINREGION and included ZINCOUNTRY as external characteristics.
    3.and then created infosource and assigned DataSource and created hierarchy and created InfoPackage.
    4. selected the hierarchy in InfoPackage, which was created by clicking the hierarchy structure in DataSource and transfer structure.
    5.when i scheduled the load in InfoPackage i got above short dump message.
    I FOLLOWED THIS BLOG
    /people/prakash.bagali/blog/2006/02/07/hierarchy-upload-from-flat-files
    thanks
    Sathya Pathapati

    Hi Philippe,
    The processing step, as I could see in the status tab of the monitor, is ".Service API" I am not sure if this is what you are asking for. If not, please let me know what you want me to check for. Below is the description I have in the Status Tab.
    InfoIdocs missing; file system
    Diagnosis
    InfoIDocs are missing. With the file system as source system, the IDocs are created in BW. As this did not happen there was probably a short dump in BW.
    System response
    No end-confirmation arrived in the Warehouse from
    Procedure
    Check the short dumps in BW.
    Check the data in the InfoCube.
    Error Correction:
    If the data was correctly updated in the InfoCube, then it is possible that no InfoIDocs were generated.
    Set the data request status manually to "OK" (green traffic light).
    This error has occured in a standard SAP Program.
    Hi Ravi,
    I am not loading the data to the cube but only to the ODS. I have plans to load the data later from ODS to Cube.
    I am not using the process chains to load the data and anyway, as I am not loading to the cube, I auume the index will not come into picture. Please correct me if I am wrong.
    And, what do you mean by "Split the file". Can you please elaborate?
    Thanks,
    RPK.

  • Problem testing Standard BOR object : CATS

    Hey SAPians,
    I have issue with one of the standard BOR objects in SAP.
    BOR Object: CATS
    1. When i try to test the object, it gives a program dump, both in Development and Production environment.
    2. The dump contains the following text: "ASSIGN_LENGTH_0"
    This occurs in program SWO_DIALOG_OBJECT_KEY_EDIT". A sample screenshot of the dump location is given below:
    The Error occurs at LINE NO 68
        65   SORT info BY editorder.                                  
        66   LOOP AT info.                                            
        67     MOVE-CORRESPONDING info TO objid.                   
        68     ASSIGN old_id+objid-offset(objid-ddlength) TO <obj_id>.
        69     IF objid-outlength > width.                            
        70       width = objid-outlength.                             
        71     ENDIF.                                                 
        72     IF objid-memoryid NE space AND                         
        73        <obj_id> = space AND                                
        74        objid_control-display = false.                      
        75       GET PARAMETER ID objid-memoryid FIELD <obj_id>.      
        76     ENDIF.                                                 
        77     objid-value = <obj_id>.                                
        78     APPEND objid.                                          
        79     ADD 1 TO height.                                       
        80   ENDLOOP.
    The problem according to me is in the field "DDLENGTH" which holds value '000000'. If this field value is changed at runtime, then everything works perfect.
    Now, the question is from where his value gets populated ??
    Further debugging led me to a Function module : "SWO_QUERY_VERBS"
    which exports a internal table with values that match exactly to the values in internal table "INFO" in the above code on whom the loop is executed.
    Ppl, please guide me on this function module or the source of the function module contents...
    Is it any config issue ?? If yes, what needs to be done ??
    If not, then how it needs to be resolved ???
    Thanks in advance.
    Shashank Shirali

    Hey Mates, thanks for your valuable suggestions. However, the problem was solved. I regenerated the BOR object "CATS". This is the only thing i did. This may be due to inconsistencies during upgrade....
    Thanks
    Shashank

Maybe you are looking for