Assign Plan of Inspection to the Batch of Inspection

When a Material create with more of a Place of Work, the transaction CO11N does not assign automatically the Plan of Inspection to the Batch of Inspection.
Instead when a Material is created with a Place of Work, the transaction CO11N assigns him automatically the Plan of Inspection to the Batch of inspection as this Place of Work.
Need to assign the Plan of Inspection to the Batch of Inspection as the Place of Work.
Need to know if there is some BAPI to assign the Plan of Inspection to the Batch of Inspection without using the transaction QA02.
Regards,
Alejandro.

Function group                 Function group short text
Function Module Name           Short text for function module
COQM                           Create inspection lot from order
CO_QM_INSPECTION_LOT_CREATE    Create inspection lot from order
CPCC_BUS1191                   BAPIs for Inspection Plan
ALE_INSPECTIONPLAN_CREATE
BAPI_INSPECTIONPLAN_CREATE     Create Inspection Plan
CPDMDATACOLLECTOR2
C_PDM_INSPECTIONPLAN_CREATE
QMHU
QMHU_INSPECTION_LOT_CREATE
QPL1
QPL1_INSPECTION_LOT_CREATE
QPLEXT
QPLEXT_INSPECTION_LOT_CREATE

Similar Messages

  • Assign Plan/Budget profile to Internal Order

    While executing KO22 for particular internal order for order type 0800, I am getting the error - Assign Plan/Budget profile to the object.
    GMR

    hi
    while defining the order type in IMG ,you have to define the buget profile and then check
    regards
    thyagarajan

  • Plan/budget profile to the Internal order.

    where do we assign Plan/budget profile to the Internal order.
    Thnks
    jabeen

    Hi
           Please ensure whether your order type is assigned to the budgeted profile. Follow the following path:
    Controlling-Internal Order-Budget and Availaibility Control-Maintain Budget Profile(T Code KOAB)
    -->Maintain Budget Profile 
    Regards

  • Assigning a different inspection plan to an inspection lot

    Hi,
    I have a situation where the incorrect inspection plan is assigned to an inspection lot. Is there any mechanism to assign a different inspection plan to an inspection lot i.e. without having to reverse a goods receipt.
    Regards,

    >
    Shyamal Joshi wrote:
    > Hi Kaushal,
    >
    > There are more than one reason for this error. Check the followings.
    >
    > - The key date for inspection lot should be later than the key date for the inspection plan, later then the date when you assigned the material to the plan.
    > - The usage of lot and inspection plan should be same.
    > - The status of inspection plan must be released.
    >
    > Regards,
    > Shyamal
    Why are you not checking these things I am sure the reason would be there only. If dont wana check it is your wish. Any ways best of luck

  • Next inspection date in the Batch Determination Screen

    Hi Gurus,
    I am having problems with some user requirements because I am an abaper and I think this needs some SD expertice. Users want to see the "Next inspection date" of the batch (field QNDAT) when they do the batch determination of a delivery (Batch Split --> Batch determination). They want to see a new column in the screen, right next to the "Characteristic sort" field. I think that to put a new column in that standard screen is not possible. So I suggest to change the contents of the existing characteristic sort. And there is where I do not know how to do that. It is possible at all to have the next inspection date as a characteristic of the batch and then use it to sort?
    Any help would be really appreciated.
    Regards.

    Hi,
    Yes you can use next inspection date as a characteristics and sort the batches based on that.
    Inform the user to add this characteristics (LOBM_QNDAT) in the material batch class and batch selection class using transaction code CL02.
    Then in SPRO, using transaction code CU71, in the sort rule add this field as characteristics (LOBM_QNDAT).By this way the system will sort the batches based on next inspection date as parameter.
    Note that the user needs to fill-in the next inspection date in all the batches in order for the sort rule to work properly.
    Regards,

  • Result recording resukts are not reflecting in the batch

    Hi,
    I have one query which i am unable to get thrgh
    I have recorded the characterstics results in the results recording ,The recorded results need to reflect into the batch(MSC3N)
    What is the procedure to follow
    Please help me out
    Regards,
    Sravanthi

    Hi
    Steps Followed,
    u2022 Creation of class Characteristic (CT04)
    u2022 Creation of Batch Class (CL01)
    u2022 Assignment of above created classed characteristic to the Batch Class at the time of class creation. (CL01)
    u2022 Assignment of batch class to material master in classification view. (MM01)
    u2022 Creation of MIC with reference to above created Class characteristic (QS21)
    u2022 Creation of inspection plan with above MIC (QP01)
    u2022 Creation of new batch (external numbering) for the material (MSC1N)
    u2022 Creation of manual lot for 89 lot origin (QA01)
    u2022 Result recording and usage decision (QA32)
    please refer
    Re: QM_Class Characteristic
    Regards
    Sujit

  • Getting an error while activating a planning area "Enter values for planning horizon From and planning horizon To for the storage time profile level"

    Dear S&OP community,
    I am getting following error while creating a planning ares in a newly installed sandbox. "Enter values for planning horizon From and planning horizon To for the storage time profile level".
    This what I did...
    1) Created new attributes and master data objects and activated them successfully.
    2) Time profile created and activated successfully
    3) Trying to create planing area by assigning  time profile in step 2 and assigned master data from step1..Unable to save the data and system returns 
    this error - "Enter values for planning horizon From and planning horizon To for the storage time profile level"
    My understanding is time profile needs to be active  but doesn't have to have values...
    Any help is appreciated.
    Thanks,
    Krishna

    YS,
    Here are my time profile settings
    Level       Name          Display Horizon - Past  Display Horizon - Future
    1             Monthly     -6                                       11         
    2             Quarterly     -2                                       3
    3             Yearly        -1                                       2
    Time profile is active and but time profile data is not loaded
    Thanks,
    Krishna

  • Error while activating BI Content infocube - 0IMFA_1(IM: Assigned Plan Bud)

    Dear All,
    While I am trying to activate the Business Content cube 0IMFA_1(IM: Assigned Plan Budget (Operative) ) with Collection Mode 'Automatic' and Grouping ' In dataflow bef and afterwords', I am getting the following error -
    " Object 0IMPLAN (Currency Translation Type,CTRT) could not be collected for object 1308CQ25VCD0H9UCVDTKXM7BB (Query,ELEM)
    Message no. RSO296
    Diagnosis
    You have collected objects in the BI Metadata Repository. Associated objects for object 1308CQ25VCD0H9UCVDTKXM7BB of type Query,ELEM have also been collected. Object 0IMPLAN of type Currency Translation Type,CTRT was among these objects.
    However, this object 0IMPLAN of type Currency Translation Type,CTRT is not available in the metadata repository.
    System Response
    Object 0IMPLAN of type Currency Translation Type,CTRT is ignored in further collections. The links for object 1308CQ25VCD0H9UCVDTKXM7BB of type Query,ELEM are incomplete. This may result in you not being able to activate this object.
    Procedure
    If this error occurs while you are installing BI Content, an error may have occurred during the delivery. Inform SAP. In all other cases, check that the object has not been deleted by another user during collection, for example. "
    I am unable even to find this object.
    Kindly let me know how to solve this issue.
    Many Thanks in Advance,
    With Warm Regards,
    Vineeth

    The log says, infoobject 0IMPLAN is not available in Metadata repository.
    To make sure, RSA1--> BI Content --> Object types --> under InfoObject (middle window), double click 'Select Objects' and search for infoobject '0IMPLAN'. (in ur system its not available).
    What u have to do is:
    Either collect object by selecting Grouping ' In dataflow before' , so that u can insatll all backend objects and do the data loads.
    Then, install frontend object,by selecting Grouping ' In dataflow afterwords'
    OR
    Since u have selected Grouping ' In dataflow bef and afterwords'...
    After the collection is over, from right most window, select 'Query elements'  --> right click --> Donot install any below
    Do the same for BEx web template, Web Items, Querey Views, workbooks etc

  • Error while creating Absence as "APP-PAY-51271: The assignment is not eligible for the element

    Hi,
    "APP-PAY-51271: The assignment is not eligible for the element."

    Hi Nandhu,
    Can you check below two things which can be cause of this error:
    1. The link definition of the non-recurring element which is tagged with this absence type, as a best practice this should be an open link. If the link definition and the assignment eligibility is not matching then you may receive this error.
    2. If you have defined an accrual plan for this absence type,then check if the accrual plan recurring element is been tagged to the assignment for which you are receiving this error.
    Thanks,
    Sanjay

  • How to : only one user in a branch can do the batch process at a time ?

    dear gurus,
    In ADF web application, accessed by multiple branch (20), there is a
    batch process to create invoices from orders. There are 3-5 users in a
    branch. one user can process about 30 - 50 orders to become
    invoices.
    Business rule is : In one batch process, each users must produce
    invoices with gapless invoice number. e.g : user_1 create 30 invoices
    no.001 - 030, user_2 create 40 invoices no.031-070 ... and so on...
    So we want to protect that at a time, in one branch, only one user can
    do the batch process. User_2 must wait until user_1 is done to start
    the process.
    We use the table below to maintain the latest invoice number created :
    CREATE TABLE doc_number
    DOC_TYPE VARCHAR2(6 BYTE) NOT NULL,
    BRANCH_CODE VARCHAR2(6 BYTE) NOT NULL,
    DOC_NBR NUMBER(12) DEFAULT 0,
    CONSTRAINT "DOC_NUMBER_PK" PRIMARY KEY (DOC_TYPE, BRANCH_CODE)
    The question is :
    I think of locking a spicific row of the doc_number table (select ...
    for update wait 10) at the beginning of the batch process stored
    procedure.
    But what if the session/connection left orphan and the row is lockde
    forever before the dba kill it ?
    So is there a better approach to limit the user execution of the
    process ?
    Thank you very much for your help,
    Krist

    Forget it. See http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:4343369880986.
    However, if you are dead set on doing this old fashioned thing of trying to emulate paper invoices from a numbered tablet, you could always just let everyone generate all of their invoices with no invoice number whenever they want, then at some time ( say 21:00 every day), take a lock on the table and apply invoice numbers to all of the records with a null invoice number -- which will take only a few centiseconds at most. And let the users/system print only invoices that have numbers assigned. This way, you pretty much eliminate the concurrency issue of various branches generating invoices only in their time window -- yuk, what an awful way to have to do business.
    And completely forget about users or branches having their own range of numbers. That is completely nuts. Your database already knows which branch owns which invoice, right??

  • Copy characteristic value(class 023 ) from the material master to the batch

    Dear All,
    Is there a way to copy the characteristic value (class 123) from material master to the batch master automatically once we create a batch of that material
    I tried to create a dependency, but didnu2019t know what to write in the dependency editor
    Please advise

    I dont know if its possible in standard,  you can try and create a reference batch, and use the below user exit I found in SAP library :
    Set Up Customer Exit for Determining Source Batch
    You can use function module exit EXIT_SAPLV01Z_011 in SAP enhancement SAPLV1ZN when assigning characteristic values to batches. You use this to specify a reference batch when creating a new batch with the central function module VB_CREATE_BATCH.
    Further notes
    The reference batch must always be specified completely. This means the reference material, source batch and reference plant details must have been entered if the batch is determined at plant level.
    All batch master data is copied. If the batch is classified in this enhancement, the values assigned to the corresponding characteristics are copied.
    In the exit, you can use a communication structure with the application data for the respective business transaction (for example, plant or material type). If you require further information, you must obtain it yourself in one of the user exits (such as time, user name, or date, for example).

  • Batch creation at the time of order creation & confirmation on the batch.

    Hi all,
    My client's requirement is while creation of the production order of say 100 pcs, system should create 4 batches, each of 25 (this might be different every time) of that order & also the confirmation (CO11) should be done on those batches.
    Also if the order contains 10 operations then confirmation of operation no. 0020 should not be possible before confirmation of 10, whether it is for partial & whole quantity.
    You can say these batches will reprsent the lots.
    Regards
    SmanS
    Edited by: SAP PP Consultant on Mar 9, 2009 8:05 AM

    Hi SAP PP
    You can use this function to automatically create a batch for the material to be produced.
    You can make the following settings in Customizing (production scheduling profile):
    No automatic creation of batches in production orders
    Automatic creation of batches during order creation
    Automatic creation of batches during order release
    To carry out automatic batch splitting via batch determination, proceed as follows:
    Select the component that you wish to split and choose Component ® Batch management ® Trigger batch det.
    The system lists all batches that meet the selection criteria and that have available stock on the requirements date.
    Distribute the required quantity as required over the existing batches.
    Choose .
    The system copies each batch as a separate component into the component overview screen.
    For more information refer to Batch Determination.
    To carry out manual batch splitting with manual batch assignment, proceed as follows:
    Select the component for which you want to carry out batch splitting. Choose Edit ® Insert ® Batch split.
    Enter the batch number and the required quantity manually in the component.
    Save your entry.
    Regards
    Sachin

  • Assigning of characteristics value for a batch

    Hi All,
    Please help regarding the assigning of characteristics value for a batch in transaction code MSC2N or MSC2 in the classification tab.
    If Function modules or BAPI is available pls advise the inputs to be provided for the function modules.
    Here is one function module which i searched, but if i run this function module, i am not able to commit my characteristics value.
    The function module is CIF_BATCHCHAR_MAP.
    For the above function module the inputs which i have given are...
    Material number
    Batch
    Plant
    Class type
    Class Number
    Characteristics name
    Characteristics value
    Expecting your earliest reply.
    Thanks,
    G.C.Arravind Kumar Vikram

    Try the code below
    *.1 create key
      it_objects-key_field = 'MATNR'.
      it_objects-value_int = matnr.
      APPEND it_objects.
      it_objects-key_field = 'CHARG'.
      it_objects-value_int = charge.
      APPEND it_objects.
      CLEAR l_objectkey.
      CALL FUNCTION 'BAPI_OBJCL_CONCATENATEKEY'
        EXPORTING
          objecttable    = 'MCH1'
        IMPORTING
          objectkey_conc = l_objectkey
        TABLES
          objectkeytable = it_objects
          return         = it_return2.
    2 fill it_num it_char it_curr with values
    3 change characteristics
    CALL FUNCTION 'BAPI_OBJCL_CHANGE'
        EXPORTING
          objectkey          = l_objectkey
          objecttable        = 'MCH1'
          classnum           = it_class-classnum
          classtype          = '023'
        TABLES
          allocvaluesnumnew  = it_num
          allocvaluescharnew = it_char
          allocvaluescurrnew = it_curr
          return             = it_return.

  • How do I assign a user ID to the purchasing group so it shows up on table..

    How do I assign a user ID to the purchasing group so it shows up on table T024?  I'm trying to create a STO but am recieving the following error
    Configuration of User ID is not set up in purchasing group T024 table
        Message no. 00398
    Diagnosis
        Placeholder for batch input error text, this message is not output.
        Configuration of User ID is not set up in   purchasing group T024 table
    Thanks in advance

    Table T024 has no field for a user-Id in standard SAP
    you can only tie a user to a purchsing group via authorization with user roles.
    The message 00398 is a generic message that can be used for everything.
    I guess this message is triggered in a userexit. Designed by a collegue of you.

  • How to config the batch numbers internally from remaining?

    Hi All
    Firsr i followed the path and activated the internal batch number assignment(IMG ---> Logistics - General ---> Batch Management ---> Batch Number Assignment ---> Activate Internal Batch Number Assignment)
    then i have maintained the number ranges for the batches
    Still when I do MIGO the batch tab appears but the system is not generating the batch numbers internally instead its asking to enter the batch number.
    Please suggest if I have missed any other config or any master data towards the settings for Batch Management and also to have the system create the batch numbers at the GR stage.
    Thanks&Regards
    SRK

    Hi SRK,
               You may miss to confing this thing......
               IMG ---> Logistics - General ---> Batch Management ---> Creation of New Batches > Define...
    you can find the solution
    Regards
    Madhu

Maybe you are looking for