Assign task with use a document variable
Hi,
if i'm assigning a pdf document in assign task operation with use a document variable instead of application asset, I see the same old blank form after user submits the form.
what ever typed in the form is not seen in the output variable assigned in Assign user task.
If I use application asset and provide input xml, then I could see the filled form as output when user submits.
What should I do to get the filled data in the form?
Note: Reason for using document variable is I want to dynamically assign the form created in the process to assign task instead of getting from repository.
Highly appreciate your assistance.
Thanks,
kc
Ok. So are you populating document with the values entered by user in process before assigning.
Best approach is to xml and application asset.
And do you have your pdf document binded with xml schema. If not then you wont have fields populated in any way.
Thanks,
Prashast
Similar Messages
-
WLPI - Problem with AI Service Call in Task with AI Service start - Variables
Within WLPI I cannot succesfully call an AI service with variables that have been
collected via an AI start. These variables have been collected ok as I have done
an XPath on the variable and succesfully stored them in a string Variable. So
a succesfully AI start is working. The issue is when I try to pass these values
I have collected in their respective string variables to the next task which I
will be executing an AI Service. I do this by setting a workflow variable and
using the schema for the AI service. In the XML structure screen, I have put the
string variable at the respective element. So on the left I have my element and
on the right I have inserted my value (i.e, $strLastName).
When I run the workflow, I do not see any inserts on the AI service I am calling.
However, when I hard code a value in the XML schema "HELLO " + strFirstName it
of course inserts Hello but not the value (i.e, strFirstName). So I know I have
the correct assignment of variable to be set etc. Also, without the hardcoding
it is inserting a blank row (i.e, value='').
Please, help with this issue.Dear anonymous,
I have created an AI application view and a BPM workflow that demonstrates how to
populate an AI service call with strings extracted from an AI event response
document. This workflow also demonstrates concatination of literal strings with
string variables.
Here are some steps that you will need to follow to setup this AI application view
and workflow:
1. startweblogic from either the
'samples' or 'mydomain' found under WLI_HOME/applinteg/config. (Note, if you start
from 'mydomain', be sure to populate your database repository with the scripts in
WLI_HOME/repository/, WLI_HOME/processintegrator/ddl, and
WLI_HOME/applinteg/dev/dbms/src/sql.)
2. Open a web browser to http://<machine>:<port>/wlai
Examples:
from samples domain
http://localhost:7603/wlai
Login as system/system
from mydomain
http://localhost:7601/wlai
Login as admin/security
3. Create a folder named 'DBMS' and go into that folder
4. Create a folder in the 'DBMS' folder named 'DBMS_A' and go into that folder
5. Create an application view named 'db_av1'
6. Add an event that triggers on insert named 'insEvt'
7. Add a service named 'updTemp' that executes the following SQL...
UPDATE <db info>.CUSTOMER_TABLE SET CITY=[CITY VARCHAR]WHERE LASTNAME=[LASTNAME
VARCHAR]
(Note: Replace '<db info>' your database schema and/or catalog information)
8. Add a service named 'insSvc' that executes the following SQL...
INSERT INTO <db info>.CUSTOMER_TABLE (FIRSTNAME, LASTNAME, CITY, EMAIL) VALUES
([FIRSTNAME VARCHAR],[LASTNAME VARCHAR],[CITY VARCHAR],[EMAIL VARCHAR])
(Note: Replace '<db info>' your database schema and/or catalog information)
9. Add a service named 'listCustomers' that executes the following SQL...
SELECT * FROM <db info>.CUSTOMER_TABLE
(Note: Replace '<db info>' your database schema and/or catalog information)
10. Click 'Continue' deploy the the application view
11. In the Deploy Application View screen make sure to specify an event router with
the port corresponding to your domain. (e.g.
http://localhost:7603/DbmsEventRouter/EventRouter)
12. Bring up studio using 'studio_wlai.cmd/sh'
13. Import the attached workflow package 'TestXmlVar.jar'
14. Trigger the workflow my testing 'insSvc' from the Application View Summary web
page. Fill in the service parameters with a firstname, lastname, city, and email.
Press test to start the test.
15. List the contents of CUSTOMER_TABLE by testing the 'listCusomers' AI service or
by doing a select on that table in your database.
Results:
You should notice that the customer you inserted has a city name that is now in the
form "New "<city>" City".
Look at the Start node actions to see the population of the city and lastname string
variables. Look at the request cocument in the AddToCity task for the updTemp
service call by clicking edit on the request document variable. You will notice that
the LASTNAME field was populated with the strLastName variable and the CITY element
is populated with the strCity variable with "New " and " City" appended to both ends.
Hope this works for you,
Jim
anonymous wrote:
Within WLPI I cannot succesfully call an AI service with variables that have been
collected via an AI start. These variables have been collected ok as I have done
an XPath on the variable and succesfully stored them in a string Variable. So
a succesfully AI start is working. The issue is when I try to pass these values
I have collected in their respective string variables to the next task which I
will be executing an AI Service. I do this by setting a workflow variable and
using the schema for the AI service. In the XML structure screen, I have put the
string variable at the respective element. So on the left I have my element and
on the right I have inserted my value (i.e, $strLastName).
When I run the workflow, I do not see any inserts on the AI service I am calling.
However, when I hard code a value in the XML schema "HELLO " + strFirstName it
of course inserts Hello but not the value (i.e, strFirstName). So I know I have
the correct assignment of variable to be set etc. Also, without the hardcoding
it is inserting a blank row (i.e, value='').
Please, help with this issue.[att1.html]
[TestXmlVar.jar]
[jhinkey.vcf] -
Issue with use of shared variables in Crystal Reports 2008 Offline Viewer
Hi,
I have a report that contains a number of sub-reports which include drill-down functionality. The report returns data relating to an individual team with the user being able to view top level summary information in each area from the parent report and then drill into the sub-reports to view see more detail. The data returned by the sub-reports is filtered, using sub-report links, based on the team code parameter value given by the user. This parameter field resides in the main report.
One of the values returned by the main report is the team name. This is passed to each sub-report using a shared variable and each sub-report displays this team name as part of a heading.
This all works fine in Crystal Reports 2008, but when a report, containing data, is opened using Crystal 2008 Offline Viewer there is a problem with the shared variable. The value is displayed correctly when the user initially drills into the sub-report. However, when the user begins to drill into grouped data within the sub-report the value passed to the sub-report using the shared variable disappears.
How can I ensure that, when a report is viewed using Crystal Offline Viewer 2008, the value within the shared variable is not lost when users drill into grouped data within sub-reports
Thanks
StuartPlease re-post if this is still an issue or purchase a case and have a dedicated support engineer work with you directly:
http://store.businessobjects.com/store/bobjamer/DisplayProductByTypePage&parentCategoryID=&categoryID=11522300?resid=-Z5tUwoHAiwAAA8@NLgAAAAS&rests=1254701640551 -
How to store email content as a document variable?
Hi there,
I have a question where I need to store the content of an email-service into a txt-file. I guess I should somehow put it in an document variable, how can this be done?
Thanks in advance
Sincerely
KimKim
I would suggest one of the following two methods:
1) Prior to sending the email with the SendEmail service, build the email contents via SetValues and using String process variables. Have one String for the subject (i.e. sSubject) and one for the body (i.e. sBody) and build your content appropriately. You can use multiple SetValues or you could do it all in one. After your email's body is done being built, use a SetValue to set it to a Document variable (i.e. docBody = sBody). You can then use this Document variable as the input to your SendEmail service's body parameter. What you have then is a Document containing all the content of the email's body that you can now write to the filesystem, archive to a repository or do whatever you'd like with. Please note that if you are using HTML formatting for the email's body that your Document variable will literally have the HTML code in it. This means that if you, say, archived the Document to the file system as a .txt and then opened it, you would see all the content but it would have all the HTML code with it. To get around this, you might consider archiving the email contents as a .htm or .html file. This will cause the file to open in the system's default browser for viewing but it will also only display the actual content formatted per your HTML code.
One other thing to note is that if you wanted the subject to be part of the archived file's contents as well, you could simply do a String concatenate of the body String (sBody) to the subject String (sSubject).
2) If the emails you are sending go to the same email box(es) each time, you might consider building a second orchestration that uses an Email endpoint to watch the box(es). With this, you could monitor those inboxes and handle incoming messages appropriately.
Please do let me know if you have any questions.
Josh Boyle
[email protected]
Cardinal Solutions Group -
Assign Task Custom Notification Properties
Does anyone have a problem with missing properties when creating an Assign Task with the UserServiceV2 in ES? According to this document, there should be a way(Custom Email Templates property group) to override the default system notification settings. How can the notifications be customized?
http://help.adobe.com/en_US/livecycle/9.0/workbenchHelp/help.htm?content=000995.htmlGilbert, thanks. It was the show "All" and not the "Basic" configuration properties that I was looking for(duh).
I'm still having the problem that I described in this thread though. http://forums.adobe.com/message/3564992#3564992
I thought I was experiencing a similar problem today, and that's why I started the new thread. The problem described in the other thread occurs consistently, and my co worker does not have the problem. -
Use of a variable to reference a text box in an instance
Hi,
I have been enjoying the discussions on this board and have learnt a lot from them thus far.
I have a question, but I don't know if I can't word it correctly, or I am looking in the wrong place.
Lets say I have 3 Movie Clip Symbols in my Library : Movie0, Movie1 and Movie2
Each movie has a dynamic text box: "TextBox1"
I want to be able to write a function that can manipulate the alpha(or any attribute) of the TextBox1 in all three MovieClips.
In my limited experience I thought I could do something like the following:
for (var row:int = 0; row < dataArray.length; row++)
Movie(row).TextBox1.alpha = 1;
I hoped that this would loop through 3 times and set the alpha of the TextBox1 in all three movies to 1.
Is this possible? Can you reference an instance with use of a variable?
Any advise is greatly appreciated.
Cheers!You say these movieclips are in your library, so no code can affect them while they are there, except to create instances of them dynamically and place them on the stage.
So I'll assume you mean you have dataArray.length number of movieclips on the stage with the instance names following the naming scheme you indicated:
for (var row:int = 0; row < dataArray.length; row++)
this["Movie"+String(row)].TextBox1.alpha = 1; -
Using team assignment pool with milestone tasks
Hello,
Can someone explain to me why the team assignment pool functionality is only available for tasks with non-zero durations? In other words, any milestone task cannot be self-assigned using this feature. When one attempts to do so, the "One
or more of the specified tasks could not be re-assigned ..." error is observed and the self-assignment is not processed.
However adding a duration of 1 minute to the task solves the problem and the functionality works perfectly.
Is there any reason for this restriction? In practice it is often useful to allow team members to update milestone dates. In fact, the ability to do so is available without issue if the assignment is performed via MS Project Pro rather then as
a team assignment in PWA.
Is this a bug, or is there a grand design behind it?
Thanks,
BorisHi Boris,
We are just non-microsoft volunteers here on those Project forums thus have to clear asnwer for your question.
That being said, a milestone should not represent an activity resources are working on. Moreover they have a 0 duration, thus they don't trigger any work. Reporting on itmes that don't work, neither progress does'nt make sense in my point of view. A milestone
is a only the result of an activity, like a deliverable.
Finally, the project manager is accountable for updating milestones since he'll be reporting to his board on those milestones he owns (and not the team member). I'd said that team member will send the task progress to the project manager with eventually
the remaining work, which will update the milestones dates in case the PM approves. In my opinion, this should be done that way.
Hope this helps,
Guillaume Rouyre, MBA, MCP, MCTS | -
How to assign project specific task with the newly created projects ?
Hi All,
I need help. I need to assign project specific tasks (which i will be taking from staging table) other than the default task which are assigned during project creation. How do I proceed with this within same package. I am attaching the code of my package below...
CREATE OR REPLACE PACKAGE body xxpa_proj_conv_pkg as
PROCEDURE xxpa_create_project_proc(O_ERRBUF OUT VARCHAR2,O_RETCODE OUT VARCHAR2)
is
variables need to derive global parameters
v_responsibility_id NUMBER; --- PA Supervisor responsibility id
v_user_id NUMBER;
deriving global parameters-
-- Variables needed for API standard parameters
v_api_version_number NUMBER := 1.0;
v_commit VARCHAR2(1) := 'F';
v_return_status VARCHAR2(1);
v_init_msg_list VARCHAR2(1) := 'F';
v_msg_count NUMBER;
v_msg_index_out NUMBER;
v_msg_data VARCHAR2(2000);
v_data VARCHAR2(2000);
v_workflow_started VARCHAR2(1) := 'Y';
v_pm_product_code VARCHAR2(10);
---variables for catching errors---
v_error_flag number:=0;
-- Predefined Composite data types
v_project_in PA_PROJECT_PUB.PROJECT_IN_REC_TYPE;
v_project_out PA_PROJECT_PUB.PROJECT_OUT_REC_TYPE;
v_key_members PA_PROJECT_PUB.PROJECT_ROLE_TBL_TYPE;
v_class_categories PA_PROJECT_PUB.CLASS_CATEGORY_TBL_TYPE;
v_tasks_in_rec PA_PROJECT_PUB.TASK_IN_REC_TYPE;
v_tasks_in PA_PROJECT_PUB.TASK_IN_TBL_TYPE;
v_tasks_out_rec PA_PROJECT_PUB.TASK_OUT_REC_TYPE;
v_tasks_out PA_PROJECT_PUB.TASK_OUT_TBL_TYPE;
v_CREATED_FROM_PROJECT_ID varchar2(20);
v_CARRYING_OUT_ORGANIZATION_ID varchar2(20);
v_person_id NUMBER;
v_project_role_type VARCHAR2(20);
API_ERROR EXCEPTION;
v_a NUMBER;
cursor for project in data
CURSOR cur_project_in_data IS SELECT * FROM XXPA_PROJECT_IN_STG;
cursor for task data
CURSOR cur_task_in_data IS SELECT * FROM XXPA_TASK_IN_STG;
------------------------Cursors used for validations----------------------------------
cursor for product code used for validation
cursor cprc is select distinct PROJECT_RELATIONSHIP_CODE from PA_PROJECT_CUSTOMERS;
cursor for distribution rule-
cursor cdr is select DISTRIBUTION_RULE from PA_DISTRIBUTION_RULES;
cursor for project status code
cursor cpsc is SELECT PROJECT_STATUS_CODE, PROJECT_STATUS_NAME FROM PA_PROJECT_STATUSES WHERE STATUS_TYPE = 'PROJECT';
cursor for template/created from project id
cursor ccpid is select project_id from pa_projects where template_flag='Y';
BEGIN
select user_id, responsibility_id into v_user_id, v_responsibility_id
from PA_USER_RESP_V
where user_name like 'amit_kumar%'
and responsibility_name like'PA SupervisorS';
-- --Fnd_global.apps_initialize(user_id,resp_id, resp_appl_id);
-- Fnd_global.apps_initialize(v_user_id,v_responsibility_id,275);
-- -------calling global parameters---
pa_interface_utils_pub.set_global_info
p_api_version_number =>v_api_version_number,
p_responsibility_id =>v_responsibility_id,
p_user_id =>v_user_id,
p_msg_count =>v_msg_count,
p_msg_data =>v_msg_data,
p_return_status =>v_return_status
dbms_output.put_line ('Set Global status ->' || v_return_status);
----Cursor for PRODUCT RELATED DATA-----------
FOR REC IN cur_project_in_data LOOP
-----PASSING VALUES TO THE COMPOSITE DATA TYPE(PROJECT_IN_REC_TYPE)-------
----retrieving product code-----
select lookup_code into v_pm_product_code
from pa_lookups
where lookup_type = 'PM_PRODUCT_CODE'
and meaning = 'Oracle Project Manufacturing';
-----retrieving and validating created from project id----
BEGIN
select project_id
into v_CREATED_FROM_PROJECT_ID
from pa_projects_all
where name=rec.created_from_project_name;
EXCEPTION
when others then
O_Retcode := '1';
O_Errbuf :='Incorrent CREATED_FROM_PROJECT_NAME';
Fnd_File.Put_Line (Fnd_File.LOG, O_Errbuf);
UPDATE XXPA.XXPA_PROJECT_IN_STG
SET ERROR_FLAG ='1' ,last_updation_date='sysdate' where created_from_project_name = rec.CREATED_FROM_PROJECT_NAME;
END;
-----retrieving & validating carrying out organization id-----
BEGIN
select distinct(CARRYING_OUT_ORGANIZATION_ID)
into v_CARRYING_OUT_ORGANIZATION_ID
from pa_projects_prm_v
where CARRYING_OUT_ORGANIZATION_NAME=rec.carrying_out_organization_name;
EXCEPTION
when others then
O_Retcode := '1';
O_Errbuf :='Incorrent Carrying Out Organization name';
Fnd_File.Put_Line (Fnd_File.LOG, O_Errbuf);
UPDATE XXPA.XXPA_PROJECT_IN_STG
SET ERROR_FLAG ='1' ,last_updation_date='sysdate' where carrying_out_organization_name = rec.carrying_out_organization_name;
END ;
v_project_in.pm_project_reference := rec.segment1;
v_project_in.project_name := rec.PROJECT_NAME;
v_project_in.created_from_project_id := v_CREATED_FROM_PROJECT_ID;
v_project_in.carrying_out_organization_id := v_CARRYING_OUT_ORGANIZATION_ID;
v_project_in.project_status_code := rec.PROJECT_STATUS_CODE;
v_project_in.description := rec.PROJECT_DESCRIPTION;
v_project_in.start_date := rec.PROJECT_START_DATE;
v_project_in.completion_date := rec.PROJECT_COMPLETION_DATE;
v_project_in.distribution_rule := rec.DISTRIBUTION_RULE;
v_project_in.project_relationship_code := rec.PROJECT_RELATIONSHIP_CODE;
-------------------------Validation of incoming project data--------------------------------
v_error_flag := 1;
project relationship code validation
BEGIN
for prc in cprc
loop
if (rec.PROJECT_RELATIONSHIP_CODE=prc.PROJECT_RELATIONSHIP_CODE) or (rec.PROJECT_RELATIONSHIP_CODE is null)--can be overridden from template
then
v_error_flag :=0;
else null;
end if;
end loop;
END;
project distribution rule validation
BEGIN
for dr in cdr
loop
if (rec.DISTRIBUTION_RULE=dr.DISTRIBUTION_RULE) or (rec.DISTRIBUTION_RULE is null) null since the value can be taken from template too
then
v_error_flag :=0;
else null;
end if;
end loop;
END;
project status code validation
BEGIN
for sc in cpsc
loop
if (rec.PROJECT_STATUS_CODE=sc.PROJECT_STATUS_CODE) or (rec.PROJECT_STATUS_CODE is null) null since the value can be taken from template too
then
v_error_flag :=0;
else null;
end if;
end loop;
END;
dbms_output.put_line ('Error at PROJECT_STATUS_CODE>' ||v_error_flag);
validation logic for project start date
BEGIN
if TRUNC(rec.PROJECT_START_DATE) >= TRUNC(rec.PROJECT_COMPLETION_DATE)
THEN
v_error_flag := 1;
O_Retcode := '1';
O_Errbuf :='Project start date cannnot be greater than completion date';
Fnd_File.Put_Line (Fnd_File.LOG, O_Errbuf);
END IF;
END;
validation logic for project completion date
BEGIN
if (TRUNC(rec.PROJECT_COMPLETION_DATE)<=TRUNC(rec.PROJECT_START_DATE))
then
if ( rec.PROJECT_STATUS_CODE='CLOSED' and rec.PROJECT_COMPLETION_DATE>sysdate)
THEN
v_error_flag := 1;
O_Retcode := '1';
O_Errbuf :='completion date cannot be greater than sysdate for closed projects';
Fnd_File.Put_Line (Fnd_File.LOG, O_Errbuf);
END IF;
v_error_flag := 1;
O_Retcode := '1';
O_Errbuf :='Project closed date cannot be less than start date';
end if;
END;
--------Update staging table for the error records--------
BEGIN
if v_error_flag =1
then
O_Retcode := '1';
O_Errbuf :='Incorrect project relationship code';
Fnd_File.Put_Line (Fnd_File.LOG, O_Errbuf);
UPDATE XXPA.XXPA_PROJECT_IN_STG
SET ERROR_FLAG ='1' ,last_updation_date='sysdate' where PROJECT_RELATIONSHIP_CODE = rec.PROJECT_RELATIONSHIP_CODE;
end if;
END;
-----------------------End of validation of incoming project data----------------------------------
---------------Project Task DATA-----------------
v_a:=0;
FOR tsk IN cur_task_in_data LOOP
v_tasks_in_rec.pm_task_reference :=tsk.task_reference ;
v_tasks_in_rec.task_name :=tsk.task_name;
v_tasks_in_rec.pm_parent_task_reference :=tsk.parent_task_reference ;
v_tasks_in_rec.task_start_date :=tsk.task_start_date ;
v_tasks_in_rec.task_completion_date :=tsk.task_completion_date ;
v_tasks_in(v_a) := v_tasks_in_rec;
v_a:=v_a+1;
end loop;
---------------end of task details------------------
--INIT_CREATE_PROJECT
pa_project_pub.init_project;
---------------------CREATE_PROJECT--------------------------
pa_project_pub.create_project(
p_api_version_number=> v_api_version_number,
p_commit => v_commit,
p_init_msg_list => v_init_msg_list,
p_msg_count => v_msg_count,
p_msg_data => v_msg_data,
p_return_status => v_return_status,
p_workflow_started => v_workflow_started,
p_pm_product_code => v_pm_product_code,
p_project_in => v_project_in,
p_project_out => v_project_out,
p_key_members => v_key_members,
p_class_categories => v_class_categories,
p_tasks_in => v_tasks_in,
p_tasks_out => v_tasks_out);
if v_return_status = 'S'
then
UPDATE XXPA.XXPA_PROJECT_IN_STG
SET INTERFACE_STATUS ='Success' where segment1 = v_project_out.pa_project_number; ---P->pending & S-> Success
dbms_output.put_line('New Project Id: ' || v_project_out.pa_project_id);
dbms_output.put_line('New Project Number: ' || v_project_out.pa_project_number);
else
UPDATE XXPA.XXPA_PROJECT_IN_STG
SET INTERFACE_STATUS ='Pending' where segment1 = v_project_out.pa_project_number;
raise API_ERROR;
end if;
END LOOP;
Commit;
------Handling Exception--------
EXCEPTION
WHEN api_error THEN
dbms_output.put_line('An error occured during project creation');
IF (v_msg_count > 0 ) THEN
FOR i IN 1..v_msg_count LOOP
apps.PA_INTERFACE_UTILS_PUB.get_messages(
p_msg_count => v_msg_count,
p_encoded => 'F',
p_msg_index => i,
p_msg_data => v_msg_data,
p_data => v_data,
p_msg_index_out => v_msg_index_out);
dbms_output.put_line('Error message v_data ->'||v_data);
dbms_output.put_line('Error message v_msg_data ->'||v_msg_data);
dbms_output.put_line('Error message v_msg_index_out ->'||v_msg_index_out);
dbms_output.put_line('Error message p_msg_index ->'||i);
APPS.fnd_file.put_line(APPS.FND_FILE.LOG,v_data);
END LOOP;
END IF;
WHEN OTHERS THEN
dbms_output.put_line('An error occured during conversion, SQLCODE ->'|| SQLERRM);
IF (v_msg_count >=1 ) THEN
FOR i IN 1..v_msg_count LOOP
PA_INTERFACE_UTILS_PUB.get_messages(
p_msg_count => v_msg_count,
p_msg_index => i,
p_encoded => 'F',
p_msg_data => v_msg_data,
p_data => v_data,
p_msg_index_out => v_msg_index_out);
dbms_output.put_line('Error message ->'||v_data);
APPS.fnd_file.put_line(APPS.FND_FILE.LOG,v_data);
END LOOP;
END IF;
end; --end procedure
END xxpa_proj_conv_pkg;
* Please tell me how to assign project specific task with the newly created projects??? *
Also please tell me how to assign multiple * Project_Relationship_Code * (ex: END CLIENT, GENERAL CONTRACTOR, PRIMARY) for a particular project during project creation?Are you not storing the project number in the staging table designed for storing the task data? You can use create_project API to create the project and tasks at the same time with one single call. You may want to try that option
-
How can i access and assign java xml Document variable in javascript block
How can i access and assign org.w3c.dom.Document variable in javascript block
I tried this xmlDoc = "<%=xmldoc%>";
it is not working
plz give me solution.
thanx
VidyaThe solution would only work on MS IE browsers, as other browsers do not support an XML DOM.
It can be done, but you would be stuck with using the Microsoft broswer. If that is acceptable, I have some example code, and a book recommendation. -
Subject : it seems impossible to run a multiple boards analogical acquisition task with one or several analogical generation task using the same boards.
NI Configuration : Dev1 = Dev2 = 6321 boards
Development environnement : LabWindows CVI 10
Source code for analogical acquisitino task :
DAQmxCreateTask("",&AIRecordingtaskHandle);
DAQmxCreateAIVoltageChan(AIRecordingtaskHandle,chan,"",DAQmx_Val_NRSE,min,max,DAQmx_Val_Volts,NULL);
DAQmxCfgSampClkTiming (AIRecordingtaskHandle, "", rate, DAQmx_Val_Rising, DAQmx_Val_FiniteSamps, sampsPerChan);
DAQmxGetTaskAttribute(AIRecordingtaskHandle,DAQmx_Task_NumChans,&gNumChannels);
Chan = "Dev1/ai0, Dev1/ai1, Dev1/ai2, Dev2/ai1"
Source code for analogical generation taskS :
DAQmxErrChk (DAQmxCreateTask("",&AOtaskHandle_C1_DAC0));
DAQmxErrChk (DAQmxCreateAOVoltageChan (AOtaskHandle_C1_DAC0, chan, "", min, max,DAQmx_Val_Volts, "")); // chan vaut Dev1/ao0
DAQmxErrChk (DAQmxCreateTask("",&AOtaskHandle_C1_DAC1));
DAQmxErrChk (DAQmxCreateAOVoltageChan (AOtaskHandle_C1_DAC1, chan, "", min, max,DAQmx_Val_Volts, "")); // chan vaut Dev1/ao1
DAQmxErrChk (DAQmxCreateTask("",&AOtaskHandle_C2_DAC0));
DAQmxErrChk (DAQmxCreateAOVoltageChan (AOtaskHandle_C2_DAC0, chan, "", min, max,DAQmx_Val_Volts, "")); // chan vaut Dev2/ao0
At the first DAQmxReadBinary call attempt, the system shows an error (see attached document)
What we understand about that error : it is impossible to run the two set of tasks (ai and ao) using ressources from both Dev1 and Dev2 in the set of tasks because it is not allowed to use the same Reference Clock for that.
The question is : is there a way to to that without having that kind of message?
We tried different combinations :
- Using only one ao task (on Dev1/Dac0) : same error
- Not using any ao task (only the ai task) : no error
- configuring the ai task with only channel from Dev1 : no error
- Using "/Dev1/ai/SampleClock" as internal clock for the ai task and "/Devk/ao/SampleClock" for each ao task (k standing for "1" or "2" depending of the ao task we consider) : error
Thanks a lot.
Pièces jointes :
MsgErreur NIDAQmx.JPG 38 KBdoublon
Valentin
Certified TestStand Architect
Certified LabVIEW Developer
National Instruments France
#adMrkt{text-align: center;font-size:11px; font-weight: bold;} #adMrkt a {text-decoration: none;} #adMrkt a:hover{font-size: 9px;} #adMrkt a span{display: none;} #adMrkt a:hover span{display: block;}
Travaux Pratiques d'initiation à LabVIEW et à la mesure
Du 2 au 23 octobre, partout en France -
Use a single variable value to compare with 2 characteristics
Hi guys
I need some advice on how to use a single variable value to compare with 2 characteristics in a Infocube.
eg : I hv 2 characteristics in Infocube
Launch date & Closing Date
Now I want to display report where the variable date (inputted by user) is equal to Launch Date and Closing Date.
with regardsBobby,
if I right understood your situation, you have an input variable ZINPUT (related to a date 'A') and 2 others dates (yours Launch and Closing dates, 'B' and 'C').
You want to display only the rows where A(user input)=B=C.
Now you have to create 2 new variables (called ZB and ZC, related to B and C dates) NOT marked as 'ready for input' and set to 'mandatory variable entry'.
Call Transaction CMOD for the definition of the customer exit (if not already existing!).
Create a new project, maintain the short text, and assign a development class.
Goto Enhancements Assignments and assign RSR00001. Press the button components to continue.
Double-click on EXIT_SAPLRRS0_001. For documentation place the cursor on RSR00001 and use the menu Goto -> Display documentation.
Then double-click on ZXRSRU01. If the include doesnt exist you have to create it; assign a development class and a transport request.
Enter the coding:
DATA: L_S_RANGE TYPE RSR_S_RANGESID.
DATA: LOC_VAR_RANGE LIKE RRRANGEEXIT.
CASE I_VNAM.
WHEN 'ZB'.
(and you have to repeate the same code also for the variable 'ZC' !)
IF I_STEP = 2.
READ TABLE I_T_VAR_RANGE INTO LOC_VAR_RANGE
WITH KEY vnam = 'ZINPUT'.
if sy-subrc = 0.
L_S_RANGE-LOW = LOC_VAR_RANGE-LOW.
endif.
L_S_RANGE-sign = 'I'.
L_S_RANGE-opt = 'EQ'.
append L_S_RANGE to e_t_range.
ENDIF.
ENDCASE.
Save and activate the coding and the project.
Now go to your query and use these two new variables to restrict B and C....et voilà !!!
Let me know if you need more help (and please assign points !!! be generous !!!)
Bye,
Roberto -
Hello !
I have run into "funny" problem.
I have following workflow:
User is creating item in ListA. In new form he needs to put Manager which is User Field column type. From people picker he is choosing login name Domain\jo (Two letters seems to be important here). User is resolved correctly to John Doe. Item is saved and
added to list correctly. In list view John Doe is displayed in Manager column. In view item John Doe is in Manager field. In powershell Id;#John Doe is as a Manager field value.
Now the "funny" part:
After item is added to ListA workflow is started automatically. Workflow is assigning new task to user from Manager (CurrentItem:Manager) field using Assign task action. Now the new task is assigned to different person i.e. John Dimagio with login name DOMAIN\jod
! When I am logging value to wf history of the CurrentItem:Manager field I am getting sth like i;123#DOMAIN\jod . So value is completely different and wrong.
Can someone explain why is this happening?
My guess is that using two letters login name can cause such case but why ?
Regards,Hello !
I have run into "funny" problem.
I have following workflow:
User is creating item in ListA. In new form he needs to put Manager which is User Field column type. From people picker he is choosing login name Domain\jo (Two letters seems to be important here). User is resolved correctly to John Doe. Item is saved and
added to list correctly. In list view John Doe is displayed in Manager column. In view item John Doe is in Manager field. In powershell Id;#John Doe is as a Manager field value.
Now the "funny" part:
After item is added to ListA workflow is started automatically. Workflow is assigning new task to user from Manager (CurrentItem:Manager) field using Assign task action. Now the new task is assigned to different person i.e. John Dimagio with login name DOMAIN\jod
! When I am logging value to wf history of the CurrentItem:Manager field I am getting sth like i;123#DOMAIN\jod . So value is completely different and wrong.
Can someone explain why is this happening?
My guess is that using two letters login name can cause such case but why ?
Regards, -
Using collections / Bind variables with a PL/SQL functio returning a query
I have this code, which is supposed to assign collection variables as column names
FOR i in 1 .. Collection_count -1
LOOP
SELECT c002 into :P341_M1 FROM APEX_collections WHERE collection_name = 'MA_SKILLS' AND seq_id=i;
SELECT c002 into varholder FROM APEX_collections WHERE collection_name = 'MA_SKILLS' AND seq_id=i;
vQuery:= vQuery || 'SUM(decode(label, ''Aware'', product_'|| i || ', ''Expert'', product_' || i || ', ''Proficient'', product_' || i || ', ''Advanced(Demo)'', product_' || i || ' )) as ';
vQuery:=vQuery || varholder || ', ' ;
END LOOP;
I've tried &P341_M1. , :P341_M1, ':P341_M1', varholder
When I try '&P341_M1' it returns the whole SUM(decode... line as the label
Basically Im having a hard time using bind variables with the PL/SQL returning a query...anybody?Ok so working through this problem more I have realized that the problem is using the for loop i as an index value
This will get a value:
SELECT c002 into :P341_M1 FROM APEX_collections WHERE collection_name = 'MA_SKILLS' AND seq_id=2;
But this won't
SELECT c002 into :P341_M1 FROM APEX_collections WHERE collection_name = 'MA_SKILLS' AND seq_id=i;
I'm in the for loop, and use the i variable in other places within this loop...Is there a reason why I can't compare seq_id to i?
My new code as follows:
FOR i in 1 .. Collection_count -1 --apex_application.g_f01.COUNT - 1
LOOP
varholder:=i;
SELECT c002 into :P341_M1 FROM APEX_collections WHERE collection_name = 'MA_SKILLS' AND seq_id=2;
SELECT c002 into varholder FROM APEX_collections WHERE collection_name = 'MA_SKILLS' AND seq_id=4;
vQuery:= vQuery || 'SUM(decode(label, ''Aware'', product_'|| i || ', ''Expert'', product_' || i || ', ''Proficient'', product_' || i || ', ''Advanced(Demo)'', product_' || i || ' )) as f';
vQuery:=vQuery || :P341_M1 ||i||', ' ;
END LOOP; -
Problems with Assign Task operation
I'm having a problem with the Assign Task operation. When I export an application of the LiveCycle ES2 environment and import into another environment LiveCycle ES2, my process get stalled in the all Assign Task operations, and the only way to solve the problem I found is to redo all the Assign Task operations. But in an application with many Assign Task operations, this solution becomes very complicated.
Anyone who has encountered this problem could help me better to fix it?
Thanks for any help!
Following is the error message:
StackTrace:
java.lang.NullPointerException
at com.adobe.idp.taskmanager.dsc.util.UserManagerUtils.getUserOID(UserManagerUtils.java:959)
at com.adobe.idp.taskmanager.dsc.userservicev2.UserServiceImpl.createTaskFromDialogPropertie s(UserServiceImpl.java:941)
at com.adobe.idp.taskmanager.dsc.userservicev2.UserServiceImpl.createLongLivedTask(UserServi ceImpl.java:1631)
at com.adobe.idp.taskmanager.dsc.userservicev2.UserServiceImpl.createLongLivedTask(UserServi ceImpl.java:1506)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.adobe.idp.dsc.component.impl.DefaultPOJOInvokerImpl.invoke(DefaultPOJOInvokerImpl.jav a:118)
at com.adobe.idp.dsc.interceptor.impl.InvocationInterceptor.intercept(InvocationInterceptor. java:140)
at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:60)
at com.adobe.idp.dsc.interceptor.impl.DocumentPassivationInterceptor.intercept(DocumentPassi vationInterceptor.java:53)
at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:60)
at com.adobe.idp.dsc.transaction.interceptor.TransactionInterceptor$1.doInTransaction(Transa ctionInterceptor.java:74)
at com.adobe.idp.dsc.transaction.impl.ejb.adapter.EjbTransactionCMTAdapterBean.execute(EjbTr ansactionCMTAdapterBean.java:357)
at com.adobe.idp.dsc.transaction.impl.ejb.adapter.EjbTransactionCMTAdapterBean.doSupports(Ej bTransactionCMTAdapterBean.java:227)
at sun.reflect.GeneratedMethodAccessor643.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.jboss.invocation.Invocation.performCall(Invocation.java:359)
at org.jboss.ejb.StatelessSessionContainer$ContainerInterceptor.invoke(StatelessSessionConta iner.java:237)
at org.jboss.resource.connectionmanager.CachedConnectionInterceptor.invoke(CachedConnectionI nterceptor.java:158)
at org.jboss.ejb.plugins.StatelessSessionInstanceInterceptor.invoke(StatelessSessionInstance Interceptor.java:169)
at org.jboss.ejb.plugins.CallValidationInterceptor.invoke(CallValidationInterceptor.java:63)
at org.jboss.ejb.plugins.AbstractTxInterceptor.invokeNext(AbstractTxInterceptor.java:121)
at org.jboss.ejb.plugins.TxInterceptorCMT.runWithTransactions(TxInterceptorCMT.java:378)
at org.jboss.ejb.plugins.TxInterceptorCMT.invoke(TxInterceptorCMT.java:181)
at org.jboss.ejb.plugins.SecurityInterceptor.invoke(SecurityInterceptor.java:168)
at org.jboss.ejb.plugins.LogInterceptor.invoke(LogInterceptor.java:205)
at org.jboss.ejb.plugins.ProxyFactoryFinderInterceptor.invoke(ProxyFactoryFinderInterceptor. java:138)
at org.jboss.ejb.SessionContainer.internalInvoke(SessionContainer.java:648)
at org.jboss.ejb.Container.invoke(Container.java:960)
at org.jboss.ejb.plugins.local.BaseLocalProxyFactory.invoke(BaseLocalProxyFactory.java:430)
at org.jboss.ejb.plugins.local.StatelessSessionProxy.invoke(StatelessSessionProxy.java:103)
at $Proxy378.doSupports(Unknown Source)
at com.adobe.idp.dsc.transaction.impl.ejb.EjbTransactionProvider.execute(EjbTransactionProvi der.java:104)
at com.adobe.idp.dsc.transaction.interceptor.TransactionInterceptor.intercept(TransactionInt erceptor.java:72)
at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:60)
at com.adobe.idp.dsc.interceptor.impl.InvocationStrategyInterceptor.intercept(InvocationStra tegyInterceptor.java:55)
at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:60)
at com.adobe.idp.dsc.interceptor.impl.InvalidStateInterceptor.intercept(InvalidStateIntercep tor.java:37)
at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:60)
at com.adobe.idp.dsc.interceptor.impl.AuthorizationInterceptor.intercept(AuthorizationInterc eptor.java:165)
at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:60)
at com.adobe.idp.dsc.interceptor.impl.JMXInterceptor.intercept(JMXInterceptor.java:48)
at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:60)
at com.adobe.idp.dsc.engine.impl.ServiceEngineImpl.invoke(ServiceEngineImpl.java:121)
at com.adobe.idp.dsc.routing.Router.routeRequest(Router.java:129)
at com.adobe.idp.dsc.provider.impl.base.AbstractMessageReceiver.routeMessage(AbstractMessage Receiver.java:93)
at com.adobe.idp.dsc.provider.impl.vm.VMMessageDispatcher.doSend(VMMessageDispatcher.java:22 5)
at com.adobe.idp.dsc.provider.impl.base.AbstractMessageDispatcher.send(AbstractMessageDispat cher.java:66)
at com.adobe.idp.dsc.clientsdk.ServiceClient.invoke(ServiceClient.java:208)
at com.adobe.idp.jobmanager.execution.workadapter.AbstractExecutableJob.invokeRequest(Abstra ctExecutableJob.java:127)
at com.adobe.idp.jobmanager.execution.workadapter.PersistentExecutableJob.execute(Persistent ExecutableJob.java:60)
at com.adobe.idp.dsc.workmanager.adapter.UnManagedAsynchronousWorkAdapter.run(UnManagedAsync hronousWorkAdapter.java:39)
at org.jboss.resource.work.WorkWrapper.execute(WorkWrapper.java:204)
at org.jboss.util.threadpool.BasicTaskWrapper.run(BasicTaskWrapper.java:275)
at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:743)
at java.lang.Thread.run(Thread.java:619)Hi javier,
1. record = <DATOS>
If possible, try to use
a pre-defined strucure of type P9069
for putting data into this infotype.
2. Avoid using field symbols.
3. Try with P9069
regards,
amit m. -
Using a environment variable that was created during the Task Sequence process - SCCM 2012 R2
Hi,
I'm triyng to use a environment variable that is create in the beginning of the Task Sequence.
1. I'm using a VBScript that get the Exit Code of an application, and create the environment variable "iReturn" with the value of the exit code. (This is working)
2. I add this variable in the CustomSettings.ini, like this "iReturn=%iReturn%
3. After the step that I run the VBScript I put the "Gather" step to get the variables, but looking in the BDD.log the iReturn variable appears the same as the CustomSettings.ini configuration "iReturn=%iReturn%". (But, if I put a "Restart
Computer" step after the VBScript, the BDD.log shows the iReturn variable with the right code.)
Question: How can I update the environment variable of Windonws XP to use in the Task Sequence without restart.
OR
How can I configure autologon in SCCM 2012 (if have no way to update withou restart computer).
I already tried the autologon with registry settings and a specific user, If I starts the process with this user works, but If I starts the process with other user, after the autologon the process doesnt continue, I have to do logoff and login with the user
that I started the process.
PS: All this steps have to be executed before the WinPE phase.Environment variables must be explicitly set every time a system boots so unless you have a process to repopulate it after the reboot, it won't persist automatically.
Why not store the value in a task sequence variable so that it persists after a reboot?
Jason | http://blog.configmgrftw.com | @jasonsandys
Maybe you are looking for
-
Hi all I use to be able to send html emails with Safari by simply clicking mail contents of this page. Now whenever I click it, I get the following message.. ''An email message can't be created because Safari can't find an email application. You can
-
Help me please.
-
Global Temp Table Not found - SSIS
I am facing below error while using global temp table in SSIS. [OLE DB Destination [78]] Error: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E37. An OLE DB record is available. Source: "Microsoft SQL Server Nat
-
Help I have 'lost' my downloads icon from the dock on my desktop Mac. Can I retrieve it? If so please describe how, using simple terms. I have tried searching folders, finder and trash
-
Last stocktaking date for item
Hi, Is anyone knows how can i check the last stocktaking date for item (by select query)? Thanks in advanced, Avi