Assigning learners to Learner Group and creation of Learner Group.

Hi All,
Are there any standard ways to create Learner Groups from R12.1.3. I have tried looking for Oracle standard APIs but did not find them. Is there any other way we can create Learner group from back end. I know to create them from Application but we have to create bulk number of Learner Groups. So wanted to do them from back end.
Also we may need to assign large number of learners to learner group. Can you please explain the possible ways of doing these assignments.
Any inputs are the most awaited.
Thanks,
Abhishek.

Thanks Anders for your input. Please look into my below query also.
We are in 12.1.3. I tested creating a learner group and adding learners to it (both by organization and learner assignment).
When I try to assign a course to a Learner Group from the Application, I go to course and from "Bulk Enroll" window, I input the Learner Group to which I wanted to add the course and click on 'GO'. Now Application lists out the learners in the Learner Group. Learners in the Learner Group are not enrolled into courses unless I click the check box beside each learner and select 'Add'.
Is this the standard way of enrolling a Learner Group to the course. I am just looking for a way where I can enroll all the learners in Learner Group to a course by selecting that particular Learner Group (rather than clicking the check box beside every learner).
If I have to check against every learner to enroll them in a course, then I dont really get the point in creating Learner Groups. Please advice.
Thanks,
Abhishek

Similar Messages

How can I assign colors to calendar groups?

Trying to set up calendar in Mavericks 10.9.3. The defaults are Blue = Home, Green = Work, Purple = Holidays and
Grey = Birthdays.. until you uncheck some and they disappear. I like that they've added Holidays-- saves us all from looking them
all up and adding them ourselves..      But when adding my own groups, I'd like them in different colors
to make them stand out. However, they're all showing up as grey. I can't seem to find anywhere where I can set up my own colors.
I wish Apple weren't getting so controlling. I know many of you want everything to synch up but........not everyone uses the
calendar for work or even wants to sync it with anything else. Oh no!!
The Calendar app used to be simple and easy and you could set it up however you wanted. Thank you! I'm capable of doing that.
Doesn't appear so now and very group the same grey color, isn't very helpful! I'd get rid of "Home" too but it's the only thing that
isn't grey besides Holidays-- since I eliminated "Work".   I don't know what "Home" is. Since "Holiday" is purple, I want "Medical Appts."
in Red. I want other things in other colors. Can this be done?   If so, how?     If not, Apple, please give it back to us!
Thank you.

OK...since writing the original post, I discovered that if I selected "New Calendar" from FILE drop down,
I could add all the groups I wanted. However, each one is a new calendar. Each one is assigned a color
by Apple when the item shows up on my list with the blank box for me to name it.
I'd already entered numerous events so I went back to each one by simply double clicking on it on the
monthly calendar page that I had open, and the "info" window for that event opened. Then in the upper
right corner is a colored square where you can select the "calendar" you want that item on. Using ex.
mentioned in my first post, my Medical Appts. are now Orange (yuk!). You scroll down your list to select the
one you want and the event goes to that "calendar"-- or color.
Now... the problem I have with that is you only get a COLORED DOT next to the event. IT ISN'T HIGHLIGHTED.
The only things apparently that can be highlighted are under the "View" drop down:
"Show All Day Events", "Show Declined Events" and "Show travel time". None of which I'll use except maybe
all day events. If you click it to show, a check mark appears next to it and the event becomes highlighted.
If you click a checked one it un-checks it, and it disappears completely from your calendar page.
Apple, please let us HIGHLIGHT in whatever colors we want. Or... give us the option for each new calendar
whether we want to "highlight" or simply add the colored dot. That works really well, especially for those of us
who use our calendar also as a kind of journal.
If people want to sync them with other devices, then let them set the calendar on their various devices up the same -
same group names or same calendar names assigned to the same colors and... highlight or dot.
Then when they sync them, should sync the same. It's a win- win. Everyone gets what they want that way...

How to Find what all GL assigned to Particular account group ???

Hi !!! anybody can help me in this issue ... How to Find what all GL assigned to Particular account group ???

Hi,
Go to SE16
Give table name SKA1.
Give COA
Give account group and execute.
All the GL accounts that were assigned to this group are listed.
Reward points.
Sarma

Assignment of single Sales group to multiple Sales offices not possible

Hi all,
We need to assign single sales group to multiple sales offices in CRM. When we try to assign a Sales group to more than one Sales office the first assignment between Sales group and Sales office is removed. Only the new assignment is available.
Instead of having two assignments I still only get one.
First I transfered the ECC organization as Standard backend integration. When I realize I needed multiple backend assignment I ran the Conversion to multiple assignments. However, I am not able to realize multiple assignments.
Is it not possible to realize multiple assignment if you first transfered the ECC organization as standard (single) assignment?
Please let me know how to overcome this problem.
Regards
Anders

Hello Anders,
Starting CRM 4.0 multiple hierarchy with this enhanced org data model
works the following way:
- 1 R/3 org data mapped to ONLY 1 CRM org unit.
- multiple hierarchy (1 sales office assigned to several sales org,
1 sales group assigned to several sales office) is managed in the detail
of the org unit with tab Function and with sub tab sales office
and sales group.
For example if you have following R/3 org structure:
Sales org SOr1
_ Sales office Sof1
_ Sales Group Sg1
_ Sales office Sof2
_ Sales Group Sg1
Sales org SOr2
_ Sales office Sof1
In PPOMA_CRM you have to do the following:
For the R3 mapping :
Sor1 mapped to org unit 50000001
Sor2 mapped to org unit 50000002
Sof1 mapped to org unit 50000003
Sof2 mapped to org unit 50000004
Sg1 mapped tp org unit 50000005
And for the multiple assignment
- For sales org 50000001 and 50000002 you just have to maintain in tab
function, sub tab Sales org the Distribution channel division values
- For sales office 50000003 in sub tab Sales office the assignment to
sales org Sor1 and Sor2
- For sales office 50000004 in sub tab Sales office the assignment to
sales org Sor1
- For sales group 50000005 in sub tab sales group the assignment to
sales office Sof1 and Sof2.
If you have different division distribution channel on sales office sale
group compared to the sales org you can maintain manually the values.
Or if is it always the same values you can use * value for distribution
channel division (in that case please read carefully notes
691015 and 735020 if needed)
In addition regarding report CRMC_R3_ORG_GENERATE I would like to
clarify that this report can only be used for initial download, as
written in the customzing documentation of this report (spro-CRM -
master data - org management - data transfer - Copy SAP R/3 sales
structure ) it can only be executed once and so following org
modifications have to be done manually in PPOMA_CRM.
So for this report the correct way to use it is to create all the R/3
org data in 1 shot.
If only 1 R/3 org data is already mapped to a CRM org unit in ppoma_Crm
you will have red light and so it will be impossible to create all
dependent org data.
Hoping i have been able to clarify how it works.
Regards, Gerhard

How to Assign Event to Auth Group

Hello All,
Please suggest is there any way to assign Event to Auth Group.
Scenario is:-
Add event ZHCM* to its own authorization group.These changes to SM64 are needed in order to assign the transaction (restricted to the custom program only) to Payroll for kicking off their interfaces after each payroll run. Please create custom auth group say ZPAY and assign the ZHCM* event to this new auth group.
Thanks in Advance !!
Best Regards,
CB

i hope you are assigning to the radio group not to a radio button. i mean u could have radio group xx with buttons butt1,butt2 , butt3 etc. u cant have
xx.butt1 := 100
Besides that it's perfectly acceptable by oracle to assign to a radio group unless of course the variable is badly spelt
Hope this helps
Lewis

ISE - auto assign a device to group upon device registration

Hi,
Is it possible to auto assign a device to group upon device registration?
Typically in the registration portal, once "Register" button is clicked, the MAC address is put into "Registered Device" group, but let's say I want it to be put in different groups depending on the AD group? (Let's say when if Staff A register the device, the device automatically put into group A, Staff B to group B, and so forth)
Thanks

If you create a portal Specific for device registration, you can define to which ID groups will belong the registered endpoints.
I didn't tried this, but it might be possible to have a different portal for registration based on AD group, if you chain it after CWA or Dot1x. That would make an additional redirection though.

SCCM 2012: Assigned updates to update group don't get there deployment

Hello,
Problem:
When I assign available updates to the update group the updates are not getting there deployment. Deployed: NO
(Previous months no problem)
Situation:
SCCM 2012 SP1
We made different Update groups. Example:
Windows 2008 R2
This group is deployed to different collections and has several deployments.
Steps taken:
Downloaded the new updates to Windows 2008 R2 Deployment Package (no errors)
Edit Membership and added updates to the Windows 2008 R2 update group (no errors)
When I check the update group I see the assigned updates in the group. The Downloaded Status is YES but the Deployed status is NO. When I check the update deploymensts it has no deployments.
Any idea where to find a solution for the problem? Which logs files to check?
Greetings

You could try and run this sql query to check the database directly and see if IsDeployed = 1 here. If that is the case there is just the console that is not updated. You'll need to change the Config Item ID (in red) to match the ID of your group, you'll
find this in the console. (Right click columns and add it)
select all upd.CI_ID,upd.LocaleID,upd.ApplicabilityCondition,upd.ArticleID,upd.BulletinID,upd.CI_ID,upd.CI_UniqueID,upd.CIType_ID,upd.CIVersion,upd.CreatedBy,upd.CustomSeverity,upd.CustomSeverityName,upd.DateCreated,upd.DateLastModified,upd.DatePosted,upd.DateRevised,upd.EffectiveDate,upd.EULAAccepted,upd.EULAExists,upd.EULASignoffDate,upd.EULASignoffUser,upd.IsUserCI,upd.InUse,upd.IsBroken,upd.IsBundle,upd.IsChild,upd.IsContentProvisioned,upd.IsDeployable,upd.IsDeployed,upd.IsEnabled,upd.IsExpired,upd.IsHidden,upd.IsLatest,upd.IsMetadataOnlyUpdate,upd.IsOfflineServiceable,upd.IsQuarantined,upd.IsSuperseded,upd.IsUserDefined,upd.LastModifiedBy,upd.LastStatusTime,upd.Description,upd.DisplayName,upd.CIInformativeURL,upd.LocaleID,upd.MaxExecutionTime,upd.ModelID,upd.ModelName,upd.NumMissing,upd.NumNotApplicable,upd.NumPresent,upd.NumTotal,upd.NumUnknown,upd.PercentCompliant,upd.PermittedUses,upd.PlatformType,upd.RequiresExclusiveHandling,upd.RevisionNumber,upd.SDMPackageVersion,upd.SedoObjectVersion,upd.Severity,upd.SeverityName,upd.SourceSite
from fn_ListUpdateCIs(1033) as upd,vSMS_CIRelation as cr where ((cr.FromCIID =
16822104
AND cr.RelationType = 1) AND upd.CI_ID = cr.ToCIID)

Assign as many sales groups as desired to the sales offices in CRM

Dear guru!
Can I assign as many sales groups as desired to the sales offices in CRM? Any one sales group can belong to several sales offices in ERPu2026
In this moment I have next error:
Attribute R3_SA_GRP with value 337already assigned to O 50000935.
Please help me!
Best regards,
Andrey.
Edited by: Andrey Kachko on Aug 27, 2008 11:19 AM

CRM has the possibility to change the std. assignment which is limiting you right now into a multiple assignment. You can find this functionality in spro->crm->master data->organisational management->data transfer->(the first one) something like Change Orgmodel to multiple assignment.
Be aware that there are some limitations with each setting and this change cannot be made undone. So please read the documentation on this IMG activity carefully. If you execute the report and re-load the buffer via SE38 - Report HRBCI_ATTRIBUTES_BUFFER_UPDATE you should be able to assign the office the way you want to.
Regards, Kai

FM/RFC to assign specialisation of module group to a student

Hi,
I am trying with FM:HRIQ_SPECIALIZATION_INSERT_RFC to assign specialisation of module group to a student, when i pass Student Id, Object ID of Study Object (CS),Program ID,Module groupId, Module Group Category, am getting error "Combination of academic specializations is not allowed".
what could be the issue? pls suggest.
Thanks & Regards
Khaleed

Dear Khaleed,
Please (check) make sure you conducted all of customizing steps in relation to the SC, CG and allowed combinations of specialisations in the progam catalog
Before you can offer specializations, you must perform the following preparatory steps:
1. Set up module group variant/category combinations (both in IMG steps and PIQ_ACSTRUC)
2. Define the relevant module group categories as a u201Cspecializationu201D (by setting the flag in the customizing table).
3. Assign a module group variant to the program of study (Program data tab page of the object SC).
4. Link module groups to the program of study which reflects the required module group categories.
When you have performed the above steps, you can maintain the allowed combinations of module groups in the SLCM Menu -> `Environment` u2192 Maintain acad. specializations in the `program catalog` (=PIQ_ACSTRUC)
This function allows you to define the rules for valid and invalid specialization combinations for each of your programs of study. For example, you may have a B.A. program that requires students to select a major and a minor: With this function, you can explicitly define the major/minor combinations that are not permitted (e.g. Math Major and Math Minor).
Note: You do not have to explicitly define all allowed combinations.
br
Rob

Assign Authorization in User Groups

Dear All
Please help me , assign authorization User Groups . I go Tcode : SUGR and Tcode : SU 10 but i can't assign authorization in User Group , please help me step by step
Regard , Thanks
Lannguyen

I think only way to do it through SU10.
-Pinkle

Assigning privileges to default groups

When I'm creating a user (using Workgroup Manager) and am assigning privileges to administer groups, the default group "windows computers" doesn't show up. Actually, only the groups I've created in Workgroup Manager show up. I'd like to assign administrator privileges to these computers to some of my user accounts on the network, but not necesarilly make the user a Domain Administrator.
Does anyone know a way to do this?
Xserve G5 Mac OS X (10.3.9) ldap master no AD, windows servers

Hi,
SAP uses the wage type group concept to group wage types that have similar characteristics with regard to payroll. You must assign all wage types to a wage type group. This is also true for user-defined wage types.
You have to assign wage types to wage type groups so that you can work with the Implementation Guide (IMG). In the Implementation Guide, you only perform wage type maintenance for the wage types required in that particular section of the IMG. You select these wage types according to Wage type group. This means that you can only use the IMG to maintain wage types that have been assigned to a wage type group. In other words, if the wage types have not been assigned to a wage type group, they do not appear in the wage type maintenance in the IMG.
Warm Rgds,
Arun.M

Assigning location to order group

Hi,
I want to assign Location to Order group(Tcode KOh1) .
Please tell me how to do this.
Thanks.

Hi
Create internal order in KO01
Create order group in KOH1 and assign the internal order.
Regards,
Raman

Assign Filters to User/ Group In System 9

Hi,Does anyone know how to assign filters to user/ group in System9. I know that you have to create filters at the database level andassign security filter security from shared Services. The step I ammissing is where do you assign filter (i.e. ReadAcctFilter<<filtername>> to Accounting <<User/groupname>> thanks, 

assign filters in the shared services, under the analytic server to the user... procedure would be look for the user in the particular domain, and assign the user provisioning and the filter also.. I hope you got it.

Assign information types to books and pages

Hi,
I'm using Robohelp 7 HTML and am trying to Assign information types to books and pages. The information types are defined however I have no way of assigning them to the topics/books. All my categories are marked as "inclusive"
The Adobe Hep file says that:
Click View > Pods > Topic List. The Topics List appears.
From the Topics list, select the topic.
Click Properties .
Click the Information Types Tab. .......
There is no such Tab.
What am I doing wrong? Can someone please help

Hi there
You aren't doing anything wrong. What you have done is stumble across a feature of HTML Help that was never properly and fully implemented. I had a play with Information Types back in 2000 and concluded that they weren't worth the effort.
For one thing, they are far from intuitive for end users. An end user has to know they exist, then right-click the TOC and choose to sort the TOC by the Information Type (or types) that are available.
If you choose to continue with Information Types, I believe the process you follow is to create the types. Sounds like you have gotten that far. Then in the TOC you right-click the Books and Pages and examine the properties. On the ensuing dialog you click the Advanced tab and enable the Use Information Types option. Then you assign the types by clicking the Add... button near the bottom.
As Information types are only used with the TOC, it comes as no surprise there is nothing in Topic Properties to deal with them. Additionally, they only apply to CHM format and are totally moot if your output is WebHelp or FlashHelp.
My best advice would be to suggest to Adobe that incorrect information exists in the help. I'll be doing that with the comment you posted in the help topic. I just opened RoboHelp X5 and even as far back as X5 there is no Information Types tab in the Topic Properties.
Cheers... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7 or 8 within the day - $24.95!
Adobe Certified RoboHelp HTML Training
SorcerStone Blog
RoboHelp eBooks

Assignment of users to groups in portal based on some filter criteria

Hi All,
I have some 200 users in portal and the UME is portal database. Now I want to assign 50 users who belong to a specific department to a new group in portal.
Unfortunately during the assignment of users to groups there is no advanced search option where I can search for the users based on some criteria like department,organisation unit,first name etc. We can only search for the user based on user id or name.
How can we do a mass assignment of users to groups based on filter?
Any suggestions / solutions are highly appreciated. Points are rewarded for sure.
thanks
Sreeram

Hi Sreeram,
three possibilities:
1.) Develop a small component which does a search based on the criteria you want to use and which then assigns the found users to the group in question. Not really hard, but every development takes some time to develop, some time to test. So if you really want this actione done just once, development may take too long; if the scenario may happen more often, it may make sense to have such a component ready.
2.) Search for the users based on the criteria you want to use via the portals UI. Copy the result into some wordpad, and assign all results afterwards manually, as you have described. Ugly, but (for a one-time action) faster than 1.).
3.) Start like 2.), but use the copied result within the wordpad to "import" the group definition via a text file, see http://help.sap.com/saphelp_nw04/helpdata/en/1a/cde2fb82644d98bfb6d558440d6806/frameset.htm and around. Probably the fastest and most efficient way to go!
Hope it helps
Detlev

Assigning learners to Learner Group and creation of Learner Group.

Similar Messages

Maybe you are looking for