Assigning two editors to a attribute

Hi,
Can any body tell me if its possible to assign two attribute editors to a single attribute and then choosing on rum time what editor it should call to edit the data??
Thanks in advance
Ragards,
Nelash Jindal

Hi Nelash,
I would suggest two ways for this. Please verify with experts before you implement.
1. Create two different attributes A1, A2 with same display name A,A and assign two different attribute editors AE1, AE2 for each. Add both attributes to your asset definition and show them selectively on both inspect & edit screens, based on subtypes ST1,ST2. Say, you need to show AE1 for ST1and AE2 for ST2 & your original attribute will be A1.
So, when you save ST1, value provided in AE1 will be saved to A1, absolutely no problem. But when you save ST2, value provided in AE2 must be copied to A1, instead of A2 & this can be implemented in Filter, with subtype check.
2. No need to create A2 and AE2. Have A1-AE1 combination for any subtype. Do an asset type check in your cs-element(written to code your custom attr. editor) & display corresponding attribute editor only, based on check.
Hope this helps!
Reply if any more elaboration needed!
Mark Helpful or Correct if applicable..
~Sushanth Reddy
Edited by: B S R on Mar 14, 2013 12:55 PM
Edited by: B S R on Mar 14, 2013 12:58 PM

Similar Messages

  • Validation Assignment expression editor pop-up

    Hi All,
    When am trying to open the validation/assignment expression editor, its not opening at all.
    looks like its hidden somewhere. am using the 7.1 ramp-up.
    I have re-installed the Datamanager component.
    Have checked with calculated fields, its working.
    Kindly revert to me asap.
    thanks
    Alexander.

    Hi Alex,
    I am just guessing here, but it might be a bug or if you're using two monitors every now and then, you might have moved the popup to the other screen for better visibility like I do
    When I get back to one monitor it opens the popup in the non visible area of my laptop. You might try and extend virtually your desktop to reach wider area and see if it's there by scrolling...
    Console is a different application and it remembers the position of the popup window separately... that's why you have it there.
    Again... just an idea
    Regards,
    Boris

  • Can we assign two values to the same parameter? If yes how? For details ple

    Can we assign two values to the same parameter? If yes how? For details please go through the following SAP related program.
    Here I need to print 2 queries using the same parameter "QUERY" the value assigned to this parameter(query) is REPORT_TEST1. I want to assign one more value to this Parameter. Is is possible? This question may sound stupid if it is not possible please kindly reply.
    I want to do this to print two documents(values) with a single command (parameter)
    Anybody please help quickly,
    Now, I have 2 tables from different queries. I have a print (HTML written) option in my WEB Template
    JAVA PROGRAM:
    <param name="QUERY" value="REPORT_TEST1"/>
    function PrintReport(typePaper) {
    document.title ='Report';
    if (typePaper == "0")
    {var CurrentReportName = '&?mp=U&ptot=1&rtot=0&psize=' + escape(typePaper) + '&fsize=' + escape('39') + '&qtitle=' + escape(document.title);};
    if (typePaper == "1")
    {var CurrentReportName = '&?mp=U&ptot=1&rtot=0&psize=' + escape(typePaper) + '&fsize=' + escape('52') + '&qtitle=' + escape(document.title);};
    CurrentReportName += '&ASOFDATE=' + escape(AsOfLabel.innerText);
    var openCMD='<SAP_BW_URL>';
    openCMD += '&DATA_PROVIDER=REPORT_TEST1&TEMPLATE_ID=DPW_PRINT_PAGE&CMD=RELEASE_DATA_PROVIDER';
    openCMD += CurrentReportName;
    openWindow(openCMD,'MainTitleNow',800,600);
    The data provider here is REPORT_TEST1. Now it only prints the corresponding data for the data proviedr 1 i.e., REPORT_TEST1. I have a second table whose data comes from the data provider 2 when i use this HTML to print I want the second table contents from the data provider 2 (REPORT_TEST2)also to be printed simlutaneously.
    Please help.
    THANX A LOT,
    SRINI

    Hi,
    Try assigning two values seperated by a delimiter ( say '|') to the same parameter.
    In the function get the parameter value and seperate the values using the same delimiter.
    <param name="QUERY" value="REPORT_TEST1|REPORT_TEST2"/>
    Regards,
    Uma

  • Can we assign two values to the same parameter? If yes how?

    Can we assign two values to the same parameter? If yes how? For details please go through the following SAP related program.
    Here I need to print 2 queries using the same parameter "QUERY" the value assigned to this parameter(query) is REPORT_TEST1. I want to assign one more value to this Parameter. Is is possible? This question may sound stupid if it is not possible please kindly reply.
    I want to do this to print two documents(values) with a single command (parameter)
    Anybody please help quickly,
    Now, I have 2 tables from different queries. I have a print (HTML written) option in my WEB Template
    JAVA PROGRAM:
    <param name="QUERY" value="REPORT_TEST1"/>
    function PrintReport(typePaper) {
    document.title ='Report';
    if (typePaper == "0")
    {var CurrentReportName = '&?mp=U&ptot=1&rtot=0&psize=' + escape(typePaper) + '&fsize=' + escape('39') + '&qtitle=' + escape(document.title);};
    if (typePaper == "1")
    {var CurrentReportName = '&?mp=U&ptot=1&rtot=0&psize=' + escape(typePaper) + '&fsize=' + escape('52') + '&qtitle=' + escape(document.title);};
    CurrentReportName += '&ASOFDATE=' + escape(AsOfLabel.innerText);
    var openCMD='<SAP_BW_URL>';
    openCMD += '&DATA_PROVIDER=REPORT_TEST1&TEMPLATE_ID=DPW_PRINT_PAGE&CMD=RELEASE_DATA_PROVIDER';
    openCMD += CurrentReportName;
    openWindow(openCMD,'MainTitleNow',800,600);
    The data provider here is REPORT_TEST1. Now it only prints the corresponding data for the data proviedr 1 i.e., REPORT_TEST1. I have a second table whose data comes from the data provider 2 when i use this HTML to print I want the second table contents from the data provider 2 (REPORT_TEST2)also to be printed simlutaneously.
    Please help.
    THANX A LOT,
    SRINI

    Hi,
    Try assigning two values seperated by a delimiter ( say '|') to the same parameter.
    In the function get the parameter value and seperate the values using the same delimiter.
    <param name="QUERY" value="REPORT_TEST1|REPORT_TEST2"/>
    Regards,
    Uma

  • HT4314 I have two ipods in my house that were set up under the same email.  I have since assigned two different emails.  How can I change the game center account so that is not shared by both ipods because it is for two different users and they are not ha

    I have two ipods in my house that were set up under the same email.  I have since assigned two different emails.  How can I change the game center account so that is not shared by both ipods because it is for two different users and they are not happy?

    By "game center account", do you mean Apple ID?
    If so, you can change it.
    1. Tap settings and navigate to iTunes and App Stores
    2. Tap "Apple ID" and then tap "Sign Out"
    3. Log in with a different ID.

  • Can we assign two repeating frames to have the same source(group)?

    hi all,
    can we assign two repeating frames to have the same source(group)?..pls reply soon... bye..

    You can assign the same source group to two repeating frames.
    For more information on repeating frames, refer to the Oracle Reports Building Reports manual available on OTN: http://www.oracle.com/technology/documentation/devsuite.html

  • How to assign two states in the Withholding Info W4/W5 US(IT0210)

    Hi,
    I am using SAP ECC6.0, I am trying to assign two states in the Withholding Info W4/W5 US(IT0210) (one state where he resides and another is work state). i am able to create for one and if i create another one record, the tax area or state field is not enabled only the withholding allowance field is enabled. Can anyone provide me a solution for this.
    Lakshmi

    Lakshmi,
    Tax Area/State field is always not allowed for modification, basically you need to select the state (Subtype) before creating the record in PA30.
    Let me know still you are facing the same problem.
    Thanks,
    Kiran.
    Reward points are appreciated.

  • I want to assign two seats (4 licences) to one email address how?

    I have tried to solve this without success. I have a MAC and powerbook and a windows PC and laptop (4 licences) and I want CC on all of them. I assigned two seats to the same email in team management but this doesnt work. I am only allowed one official email address so what do I do?
    Now I cannot delete the second assignment so one licence is blocked.

    Hi Anthony,
    To Unassign a user to the Creative Cloud Team membership, please follow the steps below :
    In the Admin Team Console
    1. Click Unassigned Licenses in the left navigation pane to open the Unassigned Licenses tab.
    2. Click Assign User in the Name column. The Assign User dialog box is displayed.
    If you would like more information regarding the Creative Cloud Team Management, please follow the link below :
    http://helpx.adobe.com/creative-cloud/help/manage-creative-cloud-teams-membership.html
    Let me know if you have any questions.
    Arnaud.

  • Working with Two Editors in Two different Cities

    I had a common question, proberly look dumb asking it but i trust everyone here better then others
    Anyway I am going in to direct a feature film with a friend of mine. Now where both Final Cut Pro editors.
    However he is located in Philadelphia and I am in New Jersey. I was wondering if there would be a way with out hardware for two editors to work on the same file at two different locations?

    It's probably best for you to ask this on the final cut forum, but this answer is I think the best:
    There are several extremely expensive ways to do this, but there is one cheap way.
    Once the media is digitized, copy the media AND THE PROJECT FILE onto a separate hard drive so that you can both have copies of the same media.
    You would then e-mail the project file (or just a cut within the project) to each other so that you can both see the same cut.
    I don't think that there is a way for you to work on the same media at the same time without spending obscene amounts of money.
    Josh

  • Assign two varinats in SAP query

    Hi All,
    I am working on SAP queries 'SQ01'.
    Is it possiable to assign two variants to one query.
    I assinged to variants to one query and both are working same.Please let me know where i am doing mistake.
    Thanks,
    Swapna.

    Hi Avinash,
    Thanks for you reply.
    Actually I am working for PO approvals and rejections.
    I have added two variants in Document Overview.
    If i click on PO approvals it is working fine.
    If i calick on PO rejections it is giving the same output as PO approvals.
    I am not sure where to change the logic for PO rejections.
    Can you please help on this issue.
    Thanks,

  • Working together with the other two editors on the same project

    Dear All,
    My situation is that I have three editors working together but not in the same place, and all of us have our own FCP. In short, my question is how we can work together.
    From my understanding, I need to Recompress two copies of the media files by using Media Manager and store the files into two portable firewire hard drives to give them to the other two editors first.
    Then I really have no idea how we call exchange our bin, sequence and project after we work on it. In Avid, I know I can just copy the bin and manually put it into project folder. How about FCP?
    Thanks in advance.
    King

    Nice suggestion.
    I've been researching digital asset management theory and practical applications for years. While doing so, I've been studying practices at production shops where several artists or technicians work on the same projects using remote connections and a variety of creative applications like Photoshop, Flash, and video editors. Without centralized network storage that is deliberately built into the hardware systems, all I have come across are complex processes that require careful policing and stringent adherence to filenaming and file placement conventions as well as mutual commitment from all parties to communicate openly, precisely, and on some kind of dependable schedule.
    All of these ad hoc management processes are doomed to failure because, just by the burden of the paperwork, they impede the flow of the job. And yet without them, all parties rapidly become confused and work is lost or duplicated needlessly, making a joke of the whole thing. As soon as one party is allowed to sidestep or ignore one step in the elaborate process, the entire process can be discarded.
    My limited experience with joint editing is to divide the project into sections and marry the segments collaboratively instead of trying to allow everyone to work the whole project at the same time.
    bogiesan

  • I have two editors working on FCPX in two different cities. Here is the question: How can a project timeline be shared if they are working from mirrored source files?

    I have two editors working on FCPX in two different cities. Here is the question: How can a project timeline be shared if they are working from mirrored source files? Is there any easy way to share a project time line?

    There an episode of MacBreak Studio where Steve Martin explains exactly how to share a project, while having two separate copies of footage and events:
    http://www.youtube.com/watch?v=Hu-ga7fxKh8

  • You can only assigned two originals for document type DRW

    hello,
    while going for cv02n  in PM ,when i try to attached more than two documents its shows me an error saying that
    You can only assigned two originals for document type DRW
    but i want to attach more document at same time.
    kiran.

    hey ....thanks
    Iring
    but when i try to it by this way ,the setting for vault under which the file has to check-in
    is coming in that list but it shows the error saying that You are not authorized for activity 52 document  type KPR...
    when i try to do it under DRW it is allowing me to check in only for 2 documents when i try to attach 3 rd file it gives me an
    error
    You can only assigned two originals for document type DRW
    waiting for your reply
    kiran.

  • Pass two parameters using extraParams attribute in protlet:createWebFlowURL tag

    Ho do I pass two parameters using extraParams attribute in portlet:createWebFlowURL?

    <portlet:createWebFlowURL event="RTFM" extraParams="read=manual&do=you">
    "Linda" <[email protected]> wrote:
    >
    Ho do I pass two parameters using extraParams attribute in portlet:createWebFlowURL?

  • How to assign two complex type data in message payload

    Hi ,
    In my xsd file two complex type data is there ,
    but when i am trying to add these in message type request and response payload , i can add only one payload,
    is it any way to add 2 complex types in message types request and response payloads.
    Regards
    janardhan

    Each request and response has but a single payload. You can change the element of the payload to a single complex type from your XSD, but that's it. You can't assign more than one element to the request (or response) payload. Someone please correct me if I'm wrong.

Maybe you are looking for