Assignment not making entry in Change Log
I have a Text field that gets populated by an assignment in a Workflow, even though the field is set to track changes, no entry is made in the change log.
If I manually type sometihng in this text field the entry is made in the Change Log.
Leaving me to believe that if an Assignment changes a field value it does not record it in the change log.
Anyone else seen this? Any solutions?
Hi,
Have you checked out the records for workflow(start step)??
If yes then Check out acts as a hiding mechanism in terms of change tracking.
Check out is nothing but you create a copy of records ,modify it and save it to original unless u check in.Check out and check in mechanism are treated as if record was not checked out and changes were done to original in case of Tracking fields.So Check in is not considered as a modification for triggering of Stamp fields).
Regards
Nisha
Similar Messages
-
New entries in table TSTC not capturing in scu3 change logs
Hi ,
We have TSTC table log enabled.
New Entries which comes through transport in the table TSTC are not capturing in change logs.
We have created a new Z T-code and transported it to Quality and then to Production.
But in the change logs of the tbale TSTC it is not captured both in quality and Production.
In the table TSTC t-code is present.
But the change log for the table doesnot show any new entry created.
In development change log of TSTC, the change is present but in Quality and Production it is not present.
Development client : 400
Quality Client : 600
Production Client : 600
Can any one spill some beans on it...
Thanks & Regards
KiranYou need to add "recclient = ALL" (or same client value as "rec/client" profile parameter in RZ10) to the transport profile as well in the STMS.
Search SAP notes and the forum here for "recclient" (without "/")
Cheers,
Julius -
Changes to an order through Call Transaction not showing up in change log
I m having a problem such that if I update an order programmatically with Call Transaction u2018VA02u2019, the order does get updated updated but I donu2019t see the changes in the change log. I m only updating the order quantities. However if I update the same order quantities manually by going to TCode VA02. The changes do get shown in the change log from the Environment u2013> Changes menu. Can you please help.
Following is the simple recorded code.
PERFORM bdc_dynpro USING 'SAPMV45A' '0102'.
PERFORM bdc_field USING 'BDC_CURSOR'
'VBAK-VBELN'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'VBAK-VBELN'
'10655'.
PERFORM bdc_dynpro USING 'SAPMV45A' '4001'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=POPO'.
PERFORM bdc_dynpro USING 'SAPMV45A' '0251'.
PERFORM bdc_field USING 'BDC_CURSOR' 'RV45A-POSNR'.
PERFORM bdc_field USING 'BDC_OKCODE' '=POSI'.
PERFORM bdc_field USING 'RV45A-POSNR' '10'.
PERFORM bdc_field USING 'BDC_CURSOR'
v_rowid.
PERFORM bdc_dynpro USING 'SAPMV45A' '4001'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=SICH'.
PERFORM bdc_field USING 'BDC_CURSOR' 'RV45A-KWMENG(01)'.
PERFORM bdc_field USING 'RV45A-KWMENG(01)'
'7'.
PERFORM bdc_dynpro USING 'SAPLSPO2' '0101'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=OPT1'.
CALL TRANSACTION 'VA02'
USING t_bdcdata
MODE 'A'
MESSAGES INTO t_messtab.
COMMIT WORK AND WAIT.
IF sy-subrc NE 0.
ENDIF.Could not find answer
-
User changes in tab strip ui element are not recorded in context change log
Hi All,
We are using a tab strip ui element in webdynpro component. But user changes inside tab strip ui element are not getting recorded to the context change log. I have an input field on the same view besides tab strip ui element. User changes to this input field are getting recorded to the context change log.
Is there any restriction on context change log usage with tab strip ui element?
Could you please suggest If there is any way to record changes inside tab strip ui element.
Thanks,
Sudheer.I think there are some limitations exists, context change logs are not complete when you do value help , i am not sure about tab strip.
[http://help.sap.com/saphelp_nw70ehp1/helpdata/en/47/a8e5d273b12fe2e10000000a42189d/content.htm|http://help.sap.com/saphelp_nw70ehp1/helpdata/en/47/a8e5d273b12fe2e10000000a42189d/content.htm] -
Delete Entries of Change Log Table
Can any one tell me when do we require to delete the content of the change log table of standard DSO. I am just fresher to SAP BI.
Thank YouHi
Deleting data from the change log for an ODS object is recommended if several requests, which are no longer required for the delta update and also are no longer used for an initialization from the change log, have already been loaded into the ODS object. If a delta initialization for the update exists in connected data targets, the requests have to be updated first before the respective data can be deleted in the change log.
Only a temporary, limited history is then retained. The change log can possible become so large you might want to reduce the amount of data volume and delete data for a specific time period.
How to Delete it
Since the change log is also stored as a PSA table, you can use the function for deleting data from the PSA to delete data from the change log.
In the ODS object administration, use the main menu to choose Environment -
> Delete Change Log Data.
Or
Go to the PSA tree.
Use the main menu to choose Settings -
> Display Generated Objects, so that you can display the InfoSource for your ODS object. Your InfoSource has the same name as your ODS object, along with the prefix u20188u2019.
Use the context menu to choose Delete Change Log Data.
Santosh -
Not getting entry in error logs for SP2
Hi All,
I am using SP2 on Solaris 5.9. I got the below entry in the access logs.
75.187.38.17 - - [05/Dec/2007:00:25:07 -0500] "POST /test/testmac.htmlPOST " 400 147
74.197.120.159 - - [05/Dec/2007:00:26:02 -0500] "" 400 147
76.118.146.74 - - [05/Dec/2007:00:29:27 -0500] "" 400 147
66.159.193.19 - - [05/Dec/2007:00:31:17 -0500] "" 400 147
As it is visible that request resulted 400 response code, but I don't see any entry in the error logs.
Do I need to enable something for this in magnus.conf ?
At present for errors I have the following settings in the magnus.conf as
ErrorLog /data/servers/dir/logs/errors.
Any help would be highly appreciated.
Thanks and regards
-A400 bad requests are not logged in error logs. That usually means the request sent is malformed.
According to RFC http://www.w3.org/Protocols/rfc2616/rfc2616-sec10.html
"10.4.1 400 Bad Request
The request could not be understood by the server due to malformed syntax. The client SHOULD NOT repeat the request without modifications. "
Try attaching ssltap in between web server and browser and see what request was sent to the server.
$/usr/sfw/bin/ssltap -h
SSLTAP (C) 1997, 1998 Netscape Communications Corporation.
Usage: ssltap [-vhfsxl] [-p port] hostname:port
-v [prints version string]
-h [outputs hex instead of ASCII]
-f [turn on Fancy HTML coloring]
-s [turn on SSL decoding]
-x [turn on extra SSL hex dumps]
-p port [specify rendezvous port (default 1924)]
-l [loop - continue to wait for more connections]
$ssltap -l -p 1924 wshostname:wsport
send browser's request to 1924.
"[05/Dec/2007:08:54:37] failure (16852): Connection queue full, closing socket"
This error message means that server is under heavy load and connection queue is full. Try tweaking
MaxKeepAliveConnections and ConnQueueSize parameters in magnus.conf.
For more info refer :
Sun ONE Web Server 6.1 Performance Tuning, Sizing, and Scaling Guide
http://docs.sun.com/source/817-1836-10/index.html
P/S WS 6.1 SP2 is quite old try switching to Web Server 6.1 sp8 or Web Server 7.0 update 1.
Edited by: mv on Dec 5, 2007 2:16 PM -
Sqlplus connects locally but not with tns after changing "log on as"
I can connect to the DB from locally with "sqlplus system/password" however I can't with "sqlplus system/password@mysid".
the only thing we changed was in the service. We changed the service -> properties -> Log On values from "Local System Acount" to "This account" with a valid login and password.
RMAN now works to a NAS drive but getting to the DB is not working. When we had "local System Account" selected, we could get to the DB but RMAN could not reach the NAS drive.
Can anyone help? Oracle 11gR2 on Windows server 2008.
ThanksThank you for the help. I fixed it my not only changing all the services to that same user, but I added the user to the administrators and ora_dba groups. Now we can use the NAS drive and get to it from TNS.
-
Why the creation of a infotype is not traced by infotype change log report?
Hello Experts,
I triggered the trace of IT655 change for infotype auditing report RPUAUD00. But I found out if just create the infotype with a certain start date without changing any field, this creation cannot be picked up by the report. Is this normal or not? What else I can do to trace the creation also?
Thanks,
AllanAllan - We are having a similar issue with Events (0000) infotype? Did you apply note 44206 in your system?
If you applied the note, did the developer implement the changes to the 2 Standard SAP programs (per note 44206)?
If you didn't apply the note, how did you resolve the issue of the trace within the infotype?
Any response is appreciated. -
Changes to an order not showing up in change log
I m changing item quantity of sales order items by both Call Transaction as well as
'BAPI_SALESORDER_CHANGE', however in neither case if I open the changed order in VA02 and go to Environment->Changes menu. I dont see the changes at all.
What could be the problem? Because the order quantities ARE getting changed successfully.Hi,
I am not very sure but You might need to check for the Change Pointer's activation in your SAP System globally and at the level of Sales Order.
USe Txn SALE for this.
https://help.sap.com/saphelp_nw04/helpdata/en/78/2178da51ce11d189570000e829fbbd/content.htm
how to find change in sales order -
Get the Change log for ALV line items
Hello Experts,
I am using editable ALV table to display/change data. When user modifies data from ALV line items manually (direct entry), this change is recorded in get_context_change_log method of context node. Also in the screen I have one button, on click of this button I do some calculation for selected line items in action method and update the context node with new values. But with this second approach (button action) though values gets changed this is not recorded in to get_context_change_log of context node. I tried to use method add_context_attribute_change in button action method to add attribute changes to change log tabel but it's not adding entries to change log. Does method add_context_attribute_change only works with OVS search helps and freely programmed value helps? And is there any other way for capturing changes(done by using action method and not manually) for ALV line items?
Thanks & Regards
JayantHere is code:
METHOD.
This method is in component controller, which gets called from View Action method (on click * of button).
FIELD-SYMBOLS:<lfs> TYPE Data.
*Data Declaration
DATA lo_nd_cn_apc_item TYPE REF TO if_wd_context_node.
DATA lit_apc_item TYPE wd_this->elements_cn_apc_item.
DATA lo_el_cn_apc_item TYPE REF TO if_wd_context_element.
data: l_component type ref to if_wd_component,
l_context type ref to if_wd_context,
lfd_added type abap_bool.
CLEAR:lo_nd_cn_apc_item,lo_el_cn_apc_item.
navigate from <CONTEXT> to <CN_APC_ITEM> via lead selection
lo_nd_cn_apc_item = wd_context->get_child_node( name = wd_this->wdctx_cn_apc_item ).
REFRESH:lit_apc_item.
@TODO handle non existant child
IF lo_nd_cn_apc_item IS NOT INITIAL.
lo_nd_cn_apc_item->get_static_attributes_table( IMPORTING table = lit_apc_item ).
get element via lead selection
lo_el_cn_apc_item = lo_nd_cn_apc_item->get_element( ).
ENDIF.
l_component = wd_this->wd_get_api( ).
l_context = l_component->get_context( ).
Calculate Cost
LOOP AT lit_apc_item ASSIGNING <lfs>.
<lfs>-cal_amount = ( <lfs>-cost_percent * <lfs>-sec_amount ) / 100.
lfd_added = l_context->add_context_attribute_change(
element = lo_el_cn_apc_item
attribute_name = 'CAL_AMOUNT'
new_value = <lfs>-cal_amount
ENDLOOP.
Bind Table.
lo_nd_cn_apc_item->bind_table( new_items = lit_apc_item set_initial_elements = abap_true ).
ENDMETHOD. -
Billing Block removal not updated in the sales order change log
Hi Gurus,
A specific Billing Block is automatically assigned to the sales document header (VBAK-FAKSK) when the net value of the sales order is negative. This is an order related billing.
Sometimes the Billing block is getting released automatically and the Negative Invoice is getting created in the Background job run for creating the invoices. When we check the sales order, the Billing block is not existing and the removal of the billing block is not recorded in the Change Log of the sales order.In the CDHDR table also there are no details about the release of the billing block.
This is happening only occassionally. When I tried to replicate the issue, the system is not allowing me to create the invoice as long as the billing block is there in the sales order and if I remove the block, it is recorded in the sales order change log.
My doubt is.,
1. How the billing block is getting released automatically?
2. Even if the block is released, why it is not recorded in the Change Log of the sales order?
Looking forward your for suggestions and solutions.
Thanks,
RaviHi
Did u check in sales doc. details screen.There u can block for billing. -
How do i know change log deletion is happening or not
I have whole bunch of DSO's mentioned in the process chain which deletes change log entries evryweek. Now somebody raised that couple of change logs in the PC are not deleting. I have checked that process chain last ran in 24-feb FRIDAY and there are abviously entires in change logs as we are having new requests coming in everyday.
Is there any way that I can check and 100% confirm whether those change logs in question have deleted to 0 after feb 24thFriday(PC last ran) or not. please suggest whther i would be able to know now other than waiting till next friday and see if deletion is happening or not.Ramya
DSO --->Manage -
>Environment -
>Delete Change Log Data
Here you can either give number of days or a date before which change log should be deleted.
But when you execute this option do you see one check box Only Successfully Booked/Updated Request
a)Is this checked and disabled? If yes, check how many targets gets data from your DSO ( Display Data flow will give you that) . Update all those target from this DSO.
b) If not checked, just try to delete anything before 25 Feb..so 24th onward everything should be deleted.
After you input the date, press Start -
> and then Job . Job log will show whether it was delete properly or not.
Before deletion check the number of entries in Change Log table and do the same after deletion. This will tell you whether deletion was successful or not
Regards
Anindya -
Customer Master email field - change log not appearing
Hi experts,
We noticed that the changes to the email address are not appearing in the change log for customer master. Is this always the case? Will it be possible to include the email address in the change log? If so, how?
Thanks!Sorry.. not an issue
-
Replenishment Lead Time Change Log
Hello Experts
While making change to Replenishment Lead time field in the Product Master, the changes are not visible in the change log in transaction /SAPAPO/PROD_CD_READ. Can you please advise?
Thanks in advance.
Best Regards,
Parth SonejiHi Parth
Please go to SE11 --> Data type /SAPAPO/RELDT.
Go to further Characteristics and click on change document tab.
This flag is used to create change documents for business objects. Please let me know if this helps.
Thanks
Amol -
Change log of customer filled with garbage with inbound ADRMAS IDOC
Hi gurus,
when i process inbound IDOC ADRMAS for updating customer addres then Change log of customer filled with garbage.
the idoc is having FAX segment PAGER segment etc etc and if no data change even then there are many entries in change log with Delete..
Please help..
regardsHello,
If it is a Custom Posting Program, please verify that your code is clearing the Log before it takes in any new content.
Also, check the Data and try posting it again.
Thanks and Regards,
Venkat Phani Prasad Konduri
Maybe you are looking for
-
This is really frustrating - Over the last year I have been uploading all of my photos and occasional iPhone video to Aperture 3 (latest version all patches in place). Aperture would recognize the video, create a thumbnale and otherwise treat it n
-
I bought this used I Pad 2. It still has the lady's password connected to everything- can't even upgrade her Netflix account- cause it's Her password! Ugh! Has 500 photos of her kids' crap and a bunch of Apps I don't want. And videos. What do I do
-
Missing Transfer Rules in Selection Window for Transport
Hello, Can somebody tell me why certain transfer rules are missing in the object selection list of the transport connection window? I am using BW 3.5. Problem details: I want to transport a transfer rule from a DEV box to a QA box. In the transport
-
Urgent: Problems with IMAP-PostBox (mistakenly deleted messages)
Hi there, I would be deeply grateful if someone could help me. I worked offline and created two new postboxes (IMAP) - to which I transfered a lot of messages. Hours later when I went online, the mail-system deleted the postboxes saying: invalid acti
-
Background ALV problens, lack of coluns
Hello guys, I'm building a simple report that has about 27 coluns. The problem is when the user run's the report in background mode. After running, when you'll check the spool, it's incomplete (some of the last coluns just don't appear). I thought bu