Assignment to feature ANSAL did not take place

I am getting the error as assignment to feature ANSAL did not take place. Could you guide me how to fix it

once you check the Feature ANSAL, and activate it  and  check table T539J
Regards
Divnnr

Similar Messages

  • "Assignment to feature PINCH did not take place"

    HI i got a Error like
    "Assignment to feature PINCH did not take place"
    il  Assign APPL return value to applicant data using transaction class B.
    and the administrator table T526  updated with the same.
    also maintain Numap Feature,,,,,
    but still the Error coming please Guide me what to do ,,,,

    Hi,
    Have u maintained the feature like this-
    PINCH Administrator groups
            TCLAS Transaction Class for Data Retention
                B Applicant Data
                    APPL
                otherwise
    &  in the table -T526
    APPL     P01     Pers Officer - HO
    Pl. check it properly as this is the way to maintain the fetuare & table for Personnel officer in Recruitment module.

  • Assignment to feature P0001 did not take place

    Hi Friends
    please help me the problem
    Generate Absence Quotas
    RPTQTA00
    E00001012 Personnel number rejected as infotype P0001 is missing
    In PA30 When I have enter 0001 Organization Assignment Displayed
    Below menu bar displayed  Assignment to feature P0001 did not take place
    Regards
    Jagan

    does he have a valid IT0001 for the period you are trying to generate the absence quota?

  • Error: Assignment to feature PINCH did not take place

    Hello
    I am trying to do initial data entry using PB10, but the system is throwing an error as "Entry B02 does not exist in T526" (B02 is my personal Administrator) which I have maintained in T526 and when I try to continue removing the Pers Officer, the system is throwing an error as "Assignment to feature PINCH did not take place". The PINCH feature is also maintained for the applicant class
    I have attached the screen shots here. Can some one help me out with the solution? Thanks in advance
    Regards
    Hemanth

    HI Hemanth,
    Can you paste the screenshot of pinch feature its not attached in the previous message. Return value of the PINCH feature must be APPPL for applicant as shown below,
    Regards,
    Mithun K

  • Assignment to feature TRVFD did not take place errro when using PR05 TCD

    Mates,
    whilst trying to create travel expense PR05 TCD,system throws "Assignment to feature TRVFD did not take place
    Assignment to feature TRVFD did not take place error message
    when using TCD PR05--travel expense manager
    to give  a primer ,V_T706Z i have miantained as 99-V_T706Z-TRIPF and my trip provision variant is 66 .Im quite not sure what is the screen ,field name default value that need to be maintained.
    t706z1(single field control for dialog) is dependent on the one we maintaain in the previous table,isnt it ?kndly crct me if my understanding is wrong.
    Intially i was not able to find the trip schema -FITVFELD TCD and then as suggested by our mates in one of the threads went to PRCO TCD and copied 99 and assigned it to the trip provision variant i had maintaained.
    In TRVCD irrespective of what i maintain in return value it shows the same error .I tried UGR as 99,i tried giving trip variant and tried return as 99 (one maintained in t506z) still shows the same message.It looks like im missing something.
    Kindly share your valuable inputs to fix this .
    No Worries
    KG
    Edited by: SAPenjoy:) on Apr 27, 2011 9:00 AM

    Hi Sally
    Thanks for elucidating that for me.I was thinking the other way around i suppose:).
    Well,TRVFD has lets say Molga -99,trvug -99->return value as USERGROUP_01
    I suppose USERGROUP_01 need to be entered in the trip schema isnt it ?
    as suggested when FITVFELD is executed i choose the trip provision variant and expand the tree with schemas
    Trip schema:01 bussiness trip
    trip schema :99 travel calendar
    trip schema :pl travel planning
    trip schema :sp weekly report
    trip schema :vs trip advances
    trip schema:xx KT trip
    could you kindly let me know in which schema the value need to be entered .plz correct me if my understanding is wrong.In the meanwhile i will also try to explore ,appreciate your help.
    No Worries
    KG

  • Within the last hour, I noticed that my older MacBook Pro, while I was playing it in iTunes, lost contrast on the screen.  I am sorry, but I did not take exact notes on this event.  Around the same time, I did do a back up, uploaded software, etc.

    Within the last hour, I noticed that my older MacBook Pro, while I was using iTunes, lost contrast on the screen.  I am sorry, but I did not take exact notes on this event.  Around the same time, I did do a back up, uploaded Apple software, etc.
    I'm using two MacPros simultaniously, the old one for iTunes, and the new one for the other things.  My new one has no problems, so am wondering if there is an easy way to correct the older MacPro's contrast problems.  The computer is over three years old, and I'm wondering also if this failure is an aging sign.  (I also have other problems, such as a noisy DVD drive, which is part of the reason I bought a new MacBook Pro.)

    Is the older MBP a pre-Unibody model from early 2008? If so, it could be having this problem:
    http://support.apple.com/kb/ts2377
    If so, you would be entitled to a free repair.
    The lost contrast could be considered distorted video.
    Do you have an external monitor? If the external shows the same lost contrast, the graphics chip is likely the culprit. If the external is OK, then you probably have an issue with the built in display or possibly with its connections.
    You may also want to check in Universal Access to see if the contrast bar is set in its normal position (all the way to the left).
    Apple has a special test they can run to diagnose the NVIDIA issue, so if you have access to an Apple Store, make an appointment at the genius bar to have it run.
    Good luck!

  • How to reinstall ios 7 because in the setting the phone did not take my number please if you can help

    how to reinstall ios 7 because in the setting it did not take my number and i can not know my credit please if you can help

    you forgot your credit card info? trying to reinstall it wont fix this ( which you cant do anyway,although you can restore it to an earlier setting)

  • Photos I did not take appear in my camera roll

    This has happened twice to me this week. The first incident was last Thursday, I was looking through my camera roll (not photostream) and saw three pictures that I did not take. They were photos saved from the internet, as one of them was a 9gag meme. I was at the office that time so I guessed one of my officemates fooled around with my phone maybe. I didn't think anything of it. Then this morning, I woke up and found two more pictures on my camera roll that I didn't take. One photo was a picture of a windows desktop, which is weird because there aren't any windows computers in my household. Plus, I did not go out last night or anything, so my phone was with me the whole time. This is starting to worry me because this may be a security issue. Can a someone hack into my phone remotely and save photos into my camera roll? It's either that or I have a trigger happy alter-ego...
    Any help would be greatly appreciated.

    FINALLY somebody having the same problem as mine. Thank you for sharing that, made me feel so much saner! It recently happened to me again, but I noticed that the photos came from a group chat on the WhatsApp app i have. Apparently when I open the conversation, some of the photos get saved to my camera roll. But still, not all the random photos came from WhatsApp. There are still some photos that just "magically" appear.
    I really hope some explanation can be made. I'm sure we're not the only two with this problem.

  • I have photos on my camera stream which I did not take

    TToday, photos have appeared on both my iPhone and iPad which I did not take. Nobody has had access to either but me and I didn't take them. I find it very worrying and would like to know how it happened. I've tried to contact apple but because I don't know my Apple ID I can't actually get to talk to anyone. Please can somebody help me?

    Call the Apple account security team for your country: Apple ID: Contacting Apple for help with Apple ID account security.  You will need you serial number to set up the call, which you can find on your device in Setting>General>About.  You can see your iCloud ID by going to Settings>iCloud and looking at the email address listed at the top to the right of "Account".

  • A photo just showed up in my camera roll that I did not take!

    A photo that I did not take just showed up in my iPhone 6 camera roll??  It's a photo of a dozen oysters taken at 11:06am. I am currently at work not eating any oysters! How did this happen?  
    And now for all of my photos, it is currently saying "This photo is not editable"???

    I haven't had this exact issue but I have a similar problem. Occasionally when I open my Photos app for a split second an old old (and deleted) photo will appear full screen, as if this was the last thing open already. Which is impossible because this photo has been deleted for months. It's always the same photo. very strange.

  • I bought a iPhone 4 from USA in $749. As I did not take a data plan, still the phone is locked, now when apple is selling unlocked phone and I have paid the dull amount, will they unlock my phone

    I bought a iPhone 4 from USA in $749. i did not take a data plan, still the phone is locked, now when apple is selling unlocked phone and I have paid the full  amount, will they unlock my phone

    AT&T has not as of yet announced any plans to unlock an iPhone that was purchased as locked to them. Whether or not they will do so in the future, only AT&T would know, and they probably will not say unless and until they're ready to make an official announcement.  There is nothing Apple can do for you in this matter unless you are still within the timeframe for returning the iPhone.
    Regards.

  • Postings do not take place in Cash Ledger

    Hi,
    We are implementing Cash Ledger (PSM-FA-CL). We have done all the settngs as per the SAP Configuration Document. However, the issue we are facing is that the postings take place in the Leading Ledger as well as the Cash Ledger for all the documents and system does not make any difference between Leading and Non-Leading ledgers.
    We are on :
    EA-PS     604     0003     SAPK-60403INEAPS     SAP Enterprise Extension Public Services.

    Hi Thanks Gordon for your reply.
    Does this mean then that XL reporter can no longer be used for reporting such as the profit and loss report.  The stock take transactions fall under cost of sales and therefore any attempt to run one of the xl reports for this are completely inaccurate.  Is there anyway to get around this?
    Sam

  • System did not take VK11 call transaction if I have many call transaction

    Hi, experts, please help,
    My program will call transaction VK11 repeatly (one by one).  They all use same condition table (e.g. A005).   When I run using mode = 'N',  each call transaction returns sy-subrc = 0.   But the conditon records are not created.   But when I change to mode = 'D' the condition records are created. 
    Since VK11 is a very simple transaction, it let me feel the VK11 BDC process too fast and backend SAP not able to handle them one by one.    
    Any one has same problem?  Any idea?
    Thanks.

    Hi,
    After calling transaction check the messages table. If there are no errors then do like this.
    DO 5 TIMES.
    COMMIT WORK AND WAIT.
    CHECK sy-subrc IS INITIAL.
    EXIT.
    ENDDO.
    If this also does not work then give an explicit wait statement.
    COMMIT WORK AND WAIT.
    WAIT UPTO 4 seconds.
    We also had similar problem when we try to call sequence of transactions i.e if first transaction is success then call second.
    But even the first transaction was success second one was failing because of time lag in data base updation. Even do loop also did not worked for one transaction. after that we gave both commit work and wait & wait upto 5 seconds. Now it is working fine.
    Hope this will resolve ur issue.
    Thanks,
    Vinod.

  • Cannot create sales order as profit center assignment does not take place

    Hi,
    I am trying to create a sales order but am unable to create it as the profit center value is not picked up the value from material master.And hence, the incompletion log prevents me from creating the sales order. I seem to have done everything correct so far but somehow the profit center field (Account Assignment Tab at item level) remains empty. Instead, i can find the profit center value in "Assignment to Profitability segment".
    What should i do so that my sales order picks up the profit center information ?
    Thanks in advance.

    Hi,
    check this link it may helpful,and do search in the forum you may find an existing solution for you problem.
    RFBIBL00 - issue in Batch Input Session created
    Thanks
    Ram

  • I downloaded latest versionof Firefox from Mozilla web page, I rebooted my computer. The update did not take effect. How make late version active ?

    My present version of Firfox is 3.5.15
    My Op. System is Linux Fedora version 12.
    Two days ago when I opened a file in a web search for Mercury Scientific Thermometers, the web page for NovaTech International-USA opened.
    Centered in the middle of the page was a screen message reading
    "Error: form not found." There's an X in the upper right corner of this small screen. There's an "OK" within the screen. Clicking on either of those optons does nto close the small screen. AND, clicking on any Menu
    choice at the top of the main screen produces no action. File Edit View History Bookmarks tools Help are all unresponsive. The screen is
    locked to the Cursor and Clicking any menu item. Tho' there are many choices on the Screen for various types of thermometers no choice responds to a click.
    I closed down the computer. ThenI did a Cold Boot. There was no
    change in the situation described above. The screen appeared again if
    I chose to open Firefox.
    I use 8 virutal screens. By which I mean I can have 8 screens open at a time. All 7 of my other available screens are perfectly active and perfectly normal in their behavior.
    Rebooting changes nothing---the unwanted frozen/locked screen appears again if I attempt to open Firefox.
    I opened the Firefox website. I soon found how to download the latest version of Firefox. But I used YUM to download it. Here is an excerpt of the Yum process:
    [William@WilliamsComputer ~]$ su
    Password:
    [root@WilliamsComputer William]# yum install firefox
    Loaded plugins: presto, refresh-packagekit
    adobe-linux-i386 | 951 B 00:00
    updates/metalink | 2.8 kB 00:00
    Setting up Install Process
    Resolving Dependencies
    --> Running transaction check
    ---> Package firefox.i686 0:3.5.15-1.fc12 set to be updated
    --> Processing Dependency: xulrunner >= 1.9.1.15 for package: firefox-3.5.15-1.fc12.i686
    --> Running transaction check
    ---> Package xulrunner.i686 0:1.9.1.15-1.fc12 set to be updated
    --> Finished Dependency Resolution
    Skipping here much of the YUM processing.
    Note the finishing YUM statement:
    Dependency Updated:
    xulrunner.i686 0:1.9.1.15-1.fc12 Complete!
    [root@WilliamsComputer William]# exit
    [William@WilliamsComputer ~]$
    I did a cold reboot of my computer.
    In the Downloads Folder The Firefox update appeared.
    But when I opened a Firefox page and clicked Help-About Firefox
    the version of Firefox was still 3.5.15 AND the unwanted, Locked,
    Frozen Novatech-International---USA Screen was still present and still
    locked.
    Please teach me the preferred way to Update Firefox and once the Updates have been downloaded, how do I activate those updates?
    Many, many thanks,
    William
    Florida

    It is possible that your security software (firewall, anti-virus) blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
    Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
    See:
    *https://support.mozilla.org/kb/Server+not+found
    *https://support.mozilla.org/kb/Firewalls
    *https://support.mozilla.org/kb/fix-problems-connecting-websites-after-updating

Maybe you are looking for