AT the BI publisher forum

Cannot install XML ENterprise 562 on my laptop.
From the install, it brings up the 'installer' for 2 secs, and then goes away doing nothing. Is there some clash woth already installed software on my laptop. I alreday hv the 562 desktop, and the 10g thin client database, for the BI workshop.

Hi,
Do you find any solution for this issue ?
Samy

Similar Messages

Forums : Best practices to FAX the BI publisher reports

What are the best practices to FAX the BI publisher reports in Oracle Applications?
Also please let me know the advantages and disadvantages using CUPS printer/RightFax Server.
Thanks for your help.
Liyakath

You can use any of the methods you have listed to create XML data. Oracle seeded code is using PLSQL to generate XML rather than reports since reports technology will not be used in the next version of Application (aka Fusion)
Srini

Censorship on Adobe ColdFusion forums - Open letter to the management of the Adobe ColdFusion forums

This is reproduced from its original location at http://cfmlblog.adamcameron.me/2013/06/censorship-on-adobe-coldfusion-forums.html; it is also posted on the relevant ColdFusion forum. Apologies for the cross-post, but the two forums have different membership, and I think it's relevant to both.
Open letter to the management of the Adobe ColdFusion forums
(I do not know how to contact you, but I will try to find out and send this to you directly as well, as a courtesy).
Hi.
I am a veteran user of your ColdFusion support forums. Over the last decade or so I have been visiting the site daily (indeed several times a day: I get notified when any post is made on any of your ColdFusion-centric forums), and answering as many of people's questions as I can. For the last few years it's been via the web UI so you can go check my participation, but prior to that I was using the forums via NNTP, and my participation during that period is less easy to quantify, but it's to the tune of a few thousand posts / answers to people's questions. I consider myself an asset to the forums, and the ColdFusion community. I mean this just as "for the record", rather than any attempt to inflate any sense of my worth.
However as of today - unless you take remedial action as I will go on to detail - I will be surrendering my membership of your forums, and ceasing all attempts to assist people there.
Why am I considering doing this? Well firstly I will reproduce a thread from your forums, then I will discuss it. Where possibly the quoted material below is as it was initially posted, and if it's not exactly as originally presented, this is an accident on my part. I have highlighted some points I wish to discuss with you, simply for ease of cross-reference.
I have confirmed with Jason Dean (12Robots) that is happy for me to quote him here. I did not attempt to contact the other participant: "grazan".
Below is a chronological reproduction of the thread (in its original form, anyhow):
cold fusion 9 500 Internal server error.
created by grazan
all of a sudden none of our cfm web pages work on a windows 8 server running iis 7 .... the
server shows no errors in the event viewer .... occasionally functionality comes back w/o doing
anything ...... cold fusion did have all the hotfixes updated a few months ago but i cant get to
the admin page to give what the version is
thxs
created by 12Robots
First, ColdFusion is one word.
Second, what is a WIndows 8 server?
Third, and most important, you have provided ZERO detail. We can't help you if you don't provide something other than "none of our cfm web pages work". ColdFusion has logs (<coldfusionDir>/logs) JRun has logs (<coldfusionDir>/runtime/logs). Even if the Windows event viewer shows nothing, there should be info in those log files about what is going on.
Good luck,
Jason
created by grazan
YOU KNOW JASON YOUR A FRICKING IDIOT ......
I DIDNT REALIZE THIS WAS A GRAMMATICALLY CORREDCT FORUM ...
THANKS FOR NO HELP
created by 12Robots
*you're
jason
created by Adam Cameron
Hahahahaha. Nice.
Adam
created by Adam Cameron
Well if you got over your misplaced indignation for a moment, let's see:
ColdFusion is what people will google for, so in the spirit of helping others who might have the same question as you later on, spelling it right will help the community.
Jason's observation that you give us absolutely nothing to go on so it's basically impossible to help you is a fairly poignant observation, right? You do want help? Right, so here's some suggestions:
Articulate your issue clearly, with sufficient detail that we can help you. Read this:
http://www.catb.org/esr/faqs/smartquestions.html
Secondly... being rude to someone like Jason who really is one of the most helpful people on
these forums is a pretty stupid idea. And just serves to make you look a bit of a dick. Esp. with the caps lock on.
But anyway, let's call that a false start. Give us the details of your issue, and we'll try to help.
Cheers.
Adam
At this point, the moderator started redacting earlier messages, as detailed below:
Redacted version of earlier message:
created by 12Robots
First, [Jason, please see forum guidelines]
[rest of message as above]
Redacted version of earlier message:
created by grazan
[please see forum guidelines]
Redacted version of earlier message:
created by Adam Cameron
Entire message redacted
Redacted version of earlier message:
created by Adam Cameron
[unnecessary comments removed - Adam please see forum guidelines]
Give us the details of your issue, and we'll try to help.
Cheers.
Adam
And now back to the live thread:
created by 12Robots
Forum admin,
You censored the comment "ColdFusion is one word"? Seriously?
I didn't realize that suggesting that someone spell the name of the product correctly was against the forum guidelines. I guess I could go look it up, but I will just unsubscribe and help out at Stack Overflow instead.
Good luck,
Jason
created by Adam Cameron
Please see how much I used to help out on these forums.
I'm outa here, but not before I complain about your dictatorial behaviour.
Censorial nazi idiot.
[The entire message above has now been redacted].
That's the end of the relevant part of the thread.
Clearly I wish to speak to you about this censorship your moderator is choosing to undertake.
Firstly, let me say that I understand the perception that forums require moderation. Personally I think this position is of dubious merit, but so be it: it's a common practice. And I generally understand when I see things that have been moderated, or when a moderator step in and advises that they consider someone's wording contravenes forum guideline. I understand all this.
However.
I think the behaviour of your moderator in this situation is unacceptable. Let me elaborate.
Firstly, The highlighted comment of Jason's was removed. This comment stated - correctly - that the correct spelling of ColdFusion is as one word, as per his guidance. This comment was censored/redacted by your moderator. For the life of me, applying my most "socially modest" mindset, I cannot see what was wrong with Jason's comment, and why it needed any follow-up on any description. It was accurate advice.
The original poster's response to Jason was indeed a bit gratuitous, but - really - so what? No-one is taking offence here, and there's nothing anyone reasonable could take offence at. The person is just being a bit childish in their response. And, I hasten to add, at their own expense, I think. I see not reason to have redacted what they said.
We now come to my responses. One entire response I made was redacted (I've only just noticed this, whilst proofreading this letter). A number of tracts was redacted from my own initial post on the thread. Here I was simply explaining why Jason said what he did, and why it's good advice. And it was good advice. Your moderator here has removed both good advice, and an explanation as to why it was good advice. Again, I cannot fathom why your moderator has done this.
Following on from this I back-up Jason's assertion that the original post was inadequate on detail for us to help. This too is accurate. I reiterated this to try to make the origial poster see that Jason wasn't simply being unhelpful - to the contrary - pointing out we need more information before we can help is very good initial advice here. Advice that has now been deleted.
Next is some slightly contentious wording on my part, I suppose... at least if one doesn't actually read what I say, instead simply zooming in on one word and assessing it out of context. I pointed out that being abusive and writing in all-caps is unnecessary, and makes the person look like a dick. Note I didn't say the person was a dick (that would be abuse... very mild though), I was saying that given the behaviour the person was engaging in, they could be perceived that way. Which is... accurate. And saying someone is a dick and suggesting they could be perceived as a dick are two different things. One is ad hominem attack (bad), one is simply an observation / guidance (not bad).
At this point Jason drew my attention to this censorship going on. And this is another thing that I think is inappropriate on the part of the moderator. I have little problem with them thinking that content on this thread needs censorship (whilst they are wrong, they are entitled to their opinion), to silently and anonymously redact people's posts is an inappropriate - and to be frank cowardly - handling of this situation. If the moderator has an issue with something written on the forums, the courteous and professional thing to do would be to advise the participants that they have overstepped. This would give us a chance to remediate the situation, or to simply disagree. Simply excising someone's work - because this is volunteer work we are engaging in here - is unacceptable.
If anything ought to have been censored from the thread it was my last comment. Whilst it was accurate, I did use harsh sentiment, I accept this. However in the given situation, I don't think I have been the most out-of-line participant in proceedings.
I would like you to remediate this situation, and here is how I would like you to do it.
Restore Jason's original post. There was no reason to censor it.
Restore grazan's all-caps post. It was doing no harm.
Restore my second post (not the one laughing at Jason's joke, the longer one I discuss above). Again, useful and accurate information was removed from this post, and there was simply no reason to have had done so.
You can leave my last comment redacted. Fair enough. Whilst I stand by what I said, it is unhelpful in the context of the thread.
I also want the moderator to be censured, and I would like them to apologise for their behaviour, by posting on that thread explaining that they understand their behaviour was inappropriate and unacceptable.
If they are a community volunteer, they should be dismissed from their position. They are clearly not capable of fulfilling this role in a professional, well-balanced manner.
If they are an Adobe staff person, then the censure will have to be sufficient, although I think they should be relieved from their duties as a forum moderator, as they are not up to the task at hand.
Talk to your other moderators and advise them they need to act with a sense of balance and professionalism when moderating the forums.
In return, I will continue my participation on the forums, and continue to help the ColdFusion community members where I can, in the spirit of goodwill and co-operation. I will also try to convince Jason to do the same.
If you cannot see right to resolve this situation appropriate, I will surrender my membership of the forums and cease helping your community.
You can reply to me either via a comment against this post, or via email ([email protected]). That said, see the caveats in my communications policy: I reserve the right to publish any communications on this topic as I see fit (within the bounds of common sense).
Thanks for your time.
Adam Cameron

Adam,
Comments from a kindred spirit...
I suggest you take a breather and go do something else for a few days or weeks. Don't stomp your feet and say "I'm done for good, I won't be back", because like it or not, some of the reason you're here is to benefit YOU, and if you do go cold turkey you'll miss that benefit.
In other words, "never say never".
Like you, I have been extremely frustrated by the running of the forum from time to time as well. Sometimes it's the quality of the forum software, sometimes it's the mix of other immature people who comment, sometimes it's just me. Usually it's not the moderation or actual running of the forum, but I do understand where you're coming from.
I have benefited greatly on several occasions just by taking a vacation from forum participation.
We all have to understand two things:
1. We're able to communicate here by the good graces of Adobe, who are first and foremost a business, trying to achieve their business goals. They'd rather not upset all the idiots, because unfortunately idiots have money to spend too.
2. Nobody's perfect.
I'm not sure about the specifics, but the moderators are generally also volunteers. See item 2 above.
Hope you don't choose to stop contributing to the community, as no matter what, your contribution is good for the world.
-Noel

User Contributed Tips in the Mac Pro Displays and the Mac Pro forum

*The following User Contributed Tips are located in the Mac Pro > Displays and the Mac Pro forum:*
None at this time.
*The following related tips are located in other areas of Apple Discussions:*
a brody - Using a second Mac as a display for a first
http://discussions.apple.com/thread.jspa?threadID=1587927
Publish date: July 7, 2008
See also User Tips Library

You can use the two graphics cards, but it's only useful if you have more than two displays. It won't give you higher speed.

User Contributed Tips in the MacBook (Original) The MacBook Display forum

*The following User Contributed Tips are located in the MacBook (Original) > The MacBook Display forum:*
<pending>
*The following related tips are located in other areas of Apple Discussions:*
a brody - Using a second Mac as a display for a first
http://discussions.apple.com/thread.jspa?threadID=1587927
Publish date: July 7, 2008
See also User Tips Library

How to find out the BI Publisher Version from the Excel output generated.

Hi
Can any one tell me How to find out the BI Publisher Version from the Excel output file generated using BI publisher.
Edited by: 781689 on Aug 1, 2010 10:22 PM

Hello,
This forum is the "Oracle Reports" OTN Forum.
The "BI Publisher" OTN Forum is here :
BI Publisher
Regards

How to set the font I wanted in the BI publisher PDF output

I was refering this forum,
Font used in RTF template not the same as the PDF generated!
but the following link i(provided in that forum)s not working
http://blogs.oracle.com/xmlpublisher/2007/09/25/
I unterstood , the RTF template font won't come in the BI publsiher generated PDF output . I was trying to set from the 'BI publisher' Admin->Font Mappings.
There is 2 drop down. If I select ‘Target Font type=TrueType’- the font change is working
But if I select Type 1, where I can select the ‘real fonts’(such as Courier or Times-Rroman etc) , I cannot even apply the changes. It reverts back to
'Target Font type=TrueType’ (But I want to select the fonts from Type 1). Can you please let me know how do I do this?
Thanks in advance
Kavitha
Edited by: user6790640 on Mar 29, 2010 12:54 PM

Is there a reason why you don't use the presentation variables directly to filter the BI publisher report?
If you use the presentation variables, then ensure that the presentation variables associated with the prompt exactly matches the BIP report parameter name. In this case, you can create another datamodel with a sql that selects the parameters. for example: select :param1, :param2 from dual. In that case, the xml will include the parameter values and you should be just able to insert the param fields in the template.
Thanks!

Problems with the digital publishing tools

I downloaded the digital publishing tools but got an error when trying the preview button. I followed the instructions from adobe on clearing the indesign prefs, turning the extension on and off with the extension manager, an now none of the digital publishing tools operate. any ideas?

Moving this discussion to the Digital Publishing Suite forum.

The publisher of the uploaded package does not match the expected publisher . The publisher for this app is expected

I have a Windows Phone Silverlight 8.1 project that i am trying to publish
The publisher in the uploaded package does not match the
expected publisher. The expected publisher for this app is: "CN=00000000-8F5B-44B4-BFC6-F16FB18F2358"
I have the same Publisher Id set in the WMAppManifest file
help me
thank you

Hi kadir u,
>>The publisher in the uploaded package does not match the expected publisher. The expected publisher for this app is: "CN=00000000-8F5B-44B4-BFC6-F16FB18F2358"
Based on the error information, we can see that the publisher value does not have the correct one. So please try to open the Package.appxmanifest, then modify the Publisher as "CN=00000000-8F5B-44B4-BFC6-F16FB18F2358":
<Identity Name="*******"
Publisher="CN=00000000-8F5B-44B4-BFC6-F16FB18F2358"
Version="1.0.0.0" />
Best Regards,
Amy Peng
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

The publisher in the uploaded package does not match the expected publisher.

I have an existing Windows Phone 8 application in which I wish to release an update to. This update includes new features as well as targets the 8.1 platform. Because of an unknown problem with the original Visual Studio project
where the app stopped being able to be deployed to test devices, it was faster to create a new Visual Studio project and copy over the existing code and assets than try and find the issue in the original project. This lead to the publisher GUIDs being different
between the new and original projects.
Now when I try and submit the updated package within the Windows Phone Online dashboard I get the following error message "The publisher in the uploaded package does not match the expected publisher. The expected publisher
for this app is: "CN=0745C81D-D1ED-49ED-A219-C546B5F31DE5"".
I have updated both the WMAppManifest and Package.appxmanifest so that they have the following attributes and information:
Package.appxmanifest (PhonePublisherId="0745C81D-D1ED-49ED-A219-C546B5F31DE5")
And
WMAppManifest (PublisherID="{0745C81D-D1ED-49ED-A219-C546B5F31DE5})
I have then recompiled the app and uploaded and attempted to resubmit the update but I still get the error that the Publisher does not match. What have I missed??

This sounds tricky... perhaps you can do a search in the entire app for the GUIDs and replace them.
Also, you could build the appx package, rename the .appx to .zip, and open it up to see if you can find the wrong publisher id anywhere and it might give you a clue to where to make the change.
Matt Small - Microsoft Escalation Engineer - Forum Moderator
If my reply answers your question, please mark this post as answered.
NOTE: If I ask for code, please provide something that I can drop directly into a project and run (including XAML), or an actual application project. I'm trying to help a lot of people, so I don't have time to figure out weird snippets with undefined
objects and unknown namespaces.

11i to R12 upgrade and Maintenance Wizard and the Maintenance Wizard Forum

MetaLink doc 215527.1 recommends using the Maintenance Wizard to upgrade from 11i to R12.
The Maintenance Wizard is extolled elsewhere in this Forum to replace the Upgrade Spreadsheet.
And it is referenced a couple times in the 11i forum.
But that's not much press considering Oracle's description below.
Also, all the Maintenance Wizard MetaLink docs below reference a Maintenance Wizard forum.
The forum contains excellent feedback including how to use Maintenance Wizard within a firewall.
LCM: Maintenance Wizard
But the Maintenance Wizard forum was Archived ~two weeks ago.
Some clarification would sure be useful.
What I'm actually trying to confirm is exactly what OAS or iAS or OC4J to use with it.
Thanks in advance to anyone who can help!
From 215527.1:
Oracle Support provides Maintenance Wizard to guide you through the upgrade of Oracle Applications technology stack and products from Release 11i versions to Release 12. It draws on instructions from numerous manuals and other documentation to provide you with a complete picture of the activities required for an upgrade.
Maintenance Wizard helps you to reduce upgrade tasks by dynamically filtering the necessary steps based on criteria it obtains from your Applications environment. The resulting report is a set of step-by-step instructions of exactly what you need to do to complete your specific upgrade, including any critical patches that your system may require. It can also automatically execute many of the tasks for you, so as to reduce the possibility of errors or accidental omission of vital tasks.
These MetaLink documents reference the Archived Maintenance Wizard Forum
434387.1 - Maintenance Wizard Data Sheet
215527.1 - Maintenance Wizard Overview
430732.1 - Maintenance Wizard Downloads
329476.1 - Maintenance Installation Instructions
430734.1 - Maintenance Wizard Users Guide
405263.1 - Maintenance Wizard FAQ
406917.1 - Maintenance Wizard Training
418301.1 - Maintenance Wizard Webcast

FYI,
I am investigating what happened to the Maintenance Wizard forum. I was not alerted or consulted before it was moved to an "archived" location.
I will provide an update here once I find out how to get the situation corrected.
In the meantime, please use the other support channels (this forum, FAQ, iTAR's, etc.) for Maintenance Wizard questions and problems.
Sorry for the inconvenience.
-Vikki
Product Manager for the Maintenance Wizard
PS - To answer Tom's imbedded question (What I'm actually trying to confirm is exactly what OAS or iAS or OC4J to use with it.), please look at the Installation Guide (note 329476.1). In step 2 of the prerequisites, it states:
Maintenance Wizard version 2.x requires Oracle RDBMS 10g (10.2.0) with 10g iAS (10.1.3).
Hope this is what you needed, Tom....

For the past week or so I no longer see the toolbar in the Comcast Help Forums to reply to a post made in that forum. Has there been a change made to my iPad 3 settings and how to fix it?

Has something changed in the iPad 3? I Go to the Comcast Help Forums daily as a Volunteer Moderator and for the past week or so when I open a post in the Forum and attempt to reply to the post, ai no longer have a toolbar which contains different options that should be
available to me. Such as quote, font. Font size, inserting a link or image,etc.
Now- I do not have a toolbar at all! I already contacted Lithium who is the company that creates and maintains the Comcat Help F or umps.
What has happened and how do I resolve this? I would not be at all happy if Apple has done something that is now preventing me access.
I use my iPsd 3 daily for monitoring and helping in the Comcast Help Forums.
Thank you,
CCC.

If this is what you are used to seeing in the Comcast forum, you need a browser that can identify as a desktop browser. Safari does not do this. I am using iCab Mobile and this is what the forum looks like when I sign in.

Excel output for the xml publisher report when it is [b]scheduled [/b]

How to get the excel output for the xml publisher report when it is scheduled by a apps user? Like what is the user profile option (for the apps user who runs the report) and what are the other things that needs to be taken care of so that only this xml publisher report run by this apps user produces a EXCEL output (When scheduled) ???
Really appreciate it if any one can help me in this regards.
Thanks
Munna

Hi Munna,
For eBusiness Suite (apps user) the report output is stored the same way whether executed immediately or scheduled.,To get excel set the options > output format to Excel. Only the user that submitted the report can view it, or you can get the output file from the server. Or you can set the notify option so that a Workflow Notification is sent when the request completes.
Regards,
Gareth
Blog: http://garethroberts.blogspot.com/

Printing the XML Publisher report output from different trays of printer.

I am generating the XML Publisher report and the output is in 5 pages and that is sent to the printer
In the printer there are two trays one tray(tray 1) consists of company watermarked papers and the other tray(tray 2) will be consisting of ordinary papers
I want to print the first two pages of the report on the papers of first tray and the remaining pages to be printed from another tray consisting of ordinary papers.
How can i do this in XML Publisher.
Any response will be appreciated
Thanks
Saurav

Look at the links AJ gave.
Basically what you will do is create a Data Definition and assign a Data Template to it. Create a (document) Template and assign it to your data definition. You will use the XML Publisher Java API classes to pass parameters to your data template and extract the XML data. Then you will use this in conjunction with your document template and the OAF integration region to present the final output to the user.
All of these things are in the XML Publisher documentation and Javadocs.

Showing the XML publisher report in an iframe..

Hi all..
Please help me with this question.
Before: We had a "http page" and we are showing a XML Publisher report which is also in "http" ,in an iframe of the parent page. Previously it was working fine, as both are http.
*** Basically we are generating a URL of the report and showing it in a iframe of the web application****
Now: Recently we configured ssl to the parent page (https), and the report sever is still in "http". Because of this difference, whenever we are calling that report,it is showing a security alert and redirecting to totally wrong page.
Is there any configurations that i can do in the ""report server" to rectify this issue.Please help me with this issue.
Thank u

Hi Ravi ,
can i do it only with the xml Publisher , because when i tried it in the past and get all the staff like Template / DD / CP up and running and started the CR i get an error from the system that he is missing a report directly in the file system... so he searched for the report himself on system like a standard 6i Report. But the template and the dd is stored in the db. So my question again, can I use the XML Puplisher without a Standard Report or can i use a dummy file only for checking and after that he use my template / dd.
regards
Kay

AT the BI publisher forum

Similar Messages

Maybe you are looking for