ATA IDE for Power Mac 7200?

The original IDE with my Power Mac 7200 is 1.2 GB. It is getting tired recently. The connecter is a 50 pins. I have a 40-pin 15 GB IDE. How can I use the larger IDE for my PM 7200, if the larger IDE is useable in Power Mac 7200.
Thank you in advance for your advice.
Robert

Your 7200's original 50-pin hard drive is connected to a SCSI bus, not an IDE/ATA bus. To use an IDE hard drive in it, you'll need a Mac-compatible ATA controller PCI card, because ATA controller cards designed for PCs won't function in a Mac. The Acard AEC-6260M features an ATA-66 bus, but is limited to IDE/ATA drives that are 128 GBs and smaller. At $25 (USD), it's the least expensive IDE/ATA solution for owners of older SCSI-based Macs. If you want to use a much larger drive (160 GBs and up), you would need an Ultra ATA-133 Mac controller card, that supports 48-bit LBA.

Similar Messages

I recently upgraded to a G5 and Logic Pro 8. My previous system was a Power Mac 7200 with Logic Platinum 3.5.3. I can not open the old song files unless they are first saved in Logic 6 or 7. Where do I get a dongle for Logic 7?

I recently upgraded to a G5 and Logic Pro 8. My previous system was a Power Mac 7200 with Logic Platinum 3.5.3. I can not open the old song files unless they are first saved in Logic 6 or 7. Where do I get a dongle for Logic 7?

eBay or Craigslist would be the only choice.

Upgrading a Power Mac 7200.

Hi,
I just recently bought a Power Mac 7200 on ebay for the small sum of £1.99, and I am setting about upgrading it into something more useful.
Looking about on beay I am looking at a plethora of Mac Video cards, and one has caught my eye. An ATI Radeon 7000, and I am wondering if this will work ok in said machine as it will mean I can use a VGA monitor rather than the aging Apple 14" monitor that came with it.
Also I have a 10GB HDD to go in there but its IDE and am I right in thinking this Mac is SCSI and not IDE?
TAI
Craig

The ATI Radeon card's drivers require OS 9.2.1 or 9.2.2, which can only be installed on a 7200 that's running OS 9.1 and been updated to 9.2.1 or 9.2.2 using the third-party utility, "OS 9 Helper," and the downloadable OS 9.2.1 and 9.2.2 updates. There are older/less-expensive Mac video cards that will enable the use of VGA displays. The ATI XCLAIM Rage Pro (Mac) card comes with 4 MBs of SGRAM, with the option of an additional 4 MBs (plug-in SGRAM card). Many selling at eBay already have the 4 MB upgrade installed, and the card has both Mac and VGA ports. You can also use a Mac-to-VGA adapter, to convert the onboard monitor port for use of VGA displays. This assumes that the VRAM has been upgraded to at least 2 MBs (4 MBs is preferable).
In spite of having bought the 7200 for so little, I would discourage spending a lot of money to upgrade it. I bought a couple of 7200s in mint condition a few years ago. The 7200's power supply is compatible with the motherboard from a 7500, 7600, or 8500. I installed a pair of 8500 boards (including A/V modules) in mine, enabling the use of plug-in processor cards. With a 604e/233 MHz processor card and 1 MB L2 cache card, they were much faster than in their OEM configuration (601/75 MHz and 601/90 MHz). The amount of money I spent to boost their performance is ridiculous, given their negligible market value today. Whatever you do, don't buy one of Sonnet's 7200 G3 processor cards for a PCI slot. They've always been overpriced for what they are, and because so few were sold in comparison to the G3 (processor slot) upgrade cards, you won't find many bargain-priced 7200 PCI upgrades at eBay. In the end, the money spent on upgrading a 7200 could buy you a native beige G3 or B&W G3, both of which would easily outperform a G3-upgraded 7200. If you're upgrading your 7200 as a hobby project, choose upgrade cards that can be transferred to a newer Mac (video, ATA controller, USB and/or FireWire, etc.), because you'll never recover the money spent on them, if you were to sell the 7200 a day/week/month later.

Batteries for Power Mac G3 Beige Minitower

Where can I get batteries for Power Mac G3 Beige Minitower? I think they're Lithium batteries 3.6V 200W 922-4542.

m i g,
Here is a source for $4.99:
http://eshop.macsales.com/item/Newer%20Technology/BAA36VPRAM/
Jim
Note to others: (direct quote from above link)
This battery is an exact replacement for the below listed models.
Macintosh II series computers
Macintosh SE FDHD
Macintosh Classic (4-chip and 2-chip)
Macintosh SE/30, IIx, IIcx, IIci, IIfx, IIsi series computers
Macintosh IIvi, IIvx, Performa 600 series computers
Macintosh LC, LC II, LC III, Performa 400 series computers
Macintosh Quadra 605, LC 475, Performa 475, 477 series computers
Macintosh LC 520, LC 550, Performa 550 series computers
Macintosh Classic II, Color Classic, Performa 200 series computers
Macintosh Centris 610, 650, 660AV series computers
Macintosh Quadra 610, 660AV, 650, 700, 800, 840AV, 900, 950 series computers
Power Macintosh 6100, 7100, 8100 series computers, and Performa 6100 series computers
Power Macintosh 7200, 7300, 7500, 7600, 8500, 8600, 9500, and 9600 series computers.
Power Macintosh G3 - all models, entire series
iMac - all models, entire series
Power Mac G4 - all models, entire series
Power Mac G5 - all models, entire series

Hi, I've a Power Mac (7200/120) and like to convert regional files into windows. English files are ok but am haveing problems with files that was written in Bengali version using Bengalics(font) I would appreciate ur help.s

Hi, I'm new to this forum want help from you...
I've a Power Mac (7200/120) & been using for almost 10 years. Now the light of the Monitor is fadeing within five min. I've huge files
written in Bengali Language with a font named BengaliCS. I want to convert this files to Windows so that I can edit those files into
window. I heard there are softwares that convert Mac to Window but don't know they can convert to regional language.
I would appreciate if one can help me on this.
thanks

chand@007 wrote:
I've huge files
written in Bengali Language with a font named BengaliCS. I want to convert this files to Windows so that I can edit those files into
window.
You need to tell us A) what app did you create those files with? and B) what format are they in (.doc, .txt, etc)?
It may be possible to just transfer the files and your font to another machine without conversion depending on how they were made.
Where did you get the BengaliCS font?

168 Pin RAm for Power Mac

Does anyone know if MT8LD864AG-6 168 pin DIMM is compatible with the RAM for Power Mac 8500 120MHz and Power MAc 7200 120 MHz?
Thank you in advance for your advice.
Robert

Hi Robert,
The ZIF processor upgrade I have in my Beige G3 MT (300 mHz originally) is a Sonnet G3/500--I wish it were a G4! I installed it when I still had OS9. It stayed in place when I installed Jaguar and, later, Panther.
As Grant mentions, I used a third-party helper program called XPostFacto, "XPF" for short. Installing "unsupported" Panther with XPF was far easier than installing the "supported" Jaguar and the computer is now more stable.
T'was Grant who talked me into trying Panther. Now I can't believe I waited so long! I used an older version of XPF, version 3.1, at Grant's suggestion. V3.1 seems to be the "sweet spot" for installing Panther. Some Beige G3 owners have successfully installed 10.4.x with later version of XPF but more users have reported stability issues than with 10.3.
If you are interested in learning more about the upgrade paths available to the Beige G3, there is a very active forum area here:
http://discussions.apple.com/category.jspa?categoryID=110
Hope this helps!
A

I have a Power MAC 7200. It's hardware is failing. How can I get the old files off, so I can use them on a PC? This system will save to a 3.5 inch floppy disk.

My Power Mac 7200 is failing. I would like to be able to use old reports on my PC. How can I transfer them?
The Mac will save files to a 3.5 inch floppy disk.

You could write the files to a PC formatted floppy, you might be able to do File Sharing from it to the PC with an Ethernet cable.
How bad off is the 7200? Can we maybe fix it?

Need new low-end graphics card for Power Mac G5 (PowerPC 970)

My Power Mac G5 (PowerPC 970) has recently died I believe due to a bad
ATI RADEON X800 XT MAC EDITION video card.
Reason for thinking its the card, is that the machine was performing its intended tasks for several days even though the monitor was snow.
Having trouble determining a low-end replacement. (I no longer need the enhanced features of the RADEON X800 for this machine.
Much appreciated if someone could suggest a product appropriate for PowerPC 970.
Thanks!

I also ran into this issue with my dual G5. When I bought it, I didn't get wireless because it was a dedicated desktop on the network, but I'm upgrading and giving it to the kids to use in a room without wired network. Now that wireless would be really nice and it looks like the official solution is:
"Apple Wireless Upgrade Kit for Power Mac G5 Dual or Power Mac G5 Quad MA252G/A"
which is really expensive and difficult to install. But the weird thing is that I do have bluetooth. I wonder if there's just some little doodad I need to connect to get wireless going too, but I can't find any info on the card, and it looks like it's buried on the motherboard behind all the cooling stuff. I'll probably just spring for one of the USB solutions.

Can an OS upgrade for Power Mac 5400, 5500, and 6500 be used for the 7200?

I have a Power PC 7200 with OS 7.5.1 and got an upgrade to 7.6.1 off ebay. The disc
is labeled 5400, 5500 and 6500 series. Can I use it on my 7200?

Looking at the initial sell date of the various models reveals the following:
7200 - Aug 95
5400 - Apr 96
5500 - Feb 97
6500 - Feb 97
Since the 3 models listed on the CD were released after the 7200, I would think that it probably would not work. But I would try to see if it works. You might get a message saying you can't install it on the 7200. What you might do is duplicate the System folder on the 7200. Then try to install. If the install doesn't work or corrupts the system files, you can trash the "updated" and then use the duplicated system folder.
 Cheers, Tom

Info needed to buy a 2nd , HD for Power Mac G5- U.K.

Hi, who sells a 2nd HD to fit into my Power Mac G5
Dual 2GHz.
A 160GB Serial ATA; 7200 rpm would be O.K.
What make is the best and ho sells them.
Cheers
Trev

Hi there,
I got my 2nd HD from PC world for around £55-60. It works perfectly.
Its a 250gb, 7200rpm, SATA. Would've got one off ebay but wanted somewhere to go back to if it didn't work, rather than just some random email address.
If you go into a PC world store, just look for the HD's in the brown cardboard boxes (they have big yellow stickers on them) & look for any SATA HD's they may have.
Also you could try any good computer shop for an SATA HD. Try : http://www.cancomuk.com/
Or try here for a trusted mail order service! : http://www.ghc.co.uk/acatalog/3.5-inchInternal_HardDrives.html - I've used them many times for bits n' bobs.
When you come to install it, use the drive screws (& cables) that are supplied with your G5 not the ones that come with the HD! These screws are just inside the computer at the top next to the HD bays, there're pre-mounted on a plastic tab on the left - you'll see them.
If your machine's bays are the same as mine you'll also need to unplug the power cable from your Startup HD & move the that plug down to the 2nd HD - as there are 2 power connectors on that cable, one at the end & one above it. So you should use the second connector in for your Startup HD & the connector on the end of the cable for your 2HD.
Note: the data cable for the lower bay "may" be stuck down (by tape?) underneath the drive bays (mine was) so it "may" need just a little gentle coaxing into position in your 2nd HD - just don't pull the other end from the Logic Board!
Rory

External CD drive for power mac 8100

I have an 18 year old power mac 8100/80 AV. It has an internal CD drive that is read only. I need a cd drive that is read/write so that I can copy thousands of files off the mac. I'm assuming that an external drive may be the best route, rather than removing the old drive and installiing a new one. Can someone please advise on two points:
1. Is the external read/write CD drive the right way to go?
2. Where can I obtain said drive?
Many thanks.
i.forgot.all.i.knew

Jan and Ji~m,
Thanks for your suggestions. I have to say that I'm not yet sure what to do. I don't want to buy hardware unless I have to, and both of you appear to agree on this point. I plan to give away or recycle the powermac when I get the files off it as I have no use or space for it. I don't need to move the files to a CD; I need to move them to a PC (where I can read them) so I can get rid of the powermac.
The 2,500 files on the powermac are mostly in MS Word, in the first version that was PC and Mac compatible, so I believe I can read them with no problem on my PC when I get them there. Is this a good assumption? Or am I going to run into a conversion problem like Ji~m mentions?
I can't use the 3.5(?) inch "floppy" disk drive in the powermac because it gets formatted to mac-compatible before I copy files to it, and then the PC can't read it.
So I thought of the CD solution I mentioned in my first post because I believe a physical CD reads and writes on both the mac and the PC without being re-formatted. Is this correct?
I like the idea of a cable like Jan mentioned. I googled "AAUI to RJ-45 adapter" and can't tell from the pictures I viewed if I have a matching "AAUI Ethernet port" on the powermac. It has MANY ports, but nearly all are unlabeled! How do I determine what port might be the AAUI that Jan mentions?
If I use the cable suggestion (which I like), can I plug the other end into a PC? That's all I have -- this old powermac (OS 8.6) and several PCs (Dell and HP) with several OS's (W - XP, Vista, 7, and maybe 8). (Jan mentioned moving the files over a network, but the only "network" I have is my in-house router connecting my PCs to the i-net.) So how would I follow your cable suggestion?
Many thanks for all your help!
i.forgot.all.i.knew

DVI to s-video adpater for Power Mac G4?

I'm attempting to view digitial photos on my Power Mac G4 on an HDTV with an s-video connection. I've tried Apple's "DVI to video adapter" for the Power Mac G5, but it doesn't work, even after clicking "Detect Displays".
Is there a DVI to s-video adapater from Apple or anybody else that will work with the Power Mac G4? If not, are there any other options?

The Apple DVI to Video converter only works with certain graphics cards. The card has to be able to generate interlaced video at the correct scan rate, and modulate the color onto a carrier signal. For other card you would need a scan converter like:
<http://www.audiovisualdevices.com.au/viewprod.php?catid=&productid=CPT380>
This device has a VGA input, so you might need a DVI to VGA adapter. There may be other devices available with DVI input.

Dual monitor for Power mac g5 dual 2.3ghz

I wanted some advice on which monitors to get for a dual monitor setup and if its even possible to setup on my G5 or do I need a different video card?
Here's my computer spechs:
Power mac G5 dual core 2.3 ghz (late 2005)
Model: A1177
Memory: 2GB DDR2 SDRAM
HDD: 250GB
OS X 10.5.8 Leopard
The only thing I run on this is logic studio 8. I wanted to expand my setup but not sure how.
Any advice is greatly appreciated! Thanks
< Edited by Host >

It depends on which video card you have installed, though not much. Whichever card you have installed, you should have two DVI outputs available. With the minimum 256 Meg VRAM, you should be able to support two 1920x1080 monitors without a problem, and the "HD" monitors are getting very plentiful and dropping in price. Were I to buy today, I would make sure to get an LED monitor, as that flavor should have a longer overall life than a florescent panel monitor. You can find monitors in 23" dimensions for under $200 a pop, and more 27" monitors are showing up at a slightly bigger bite.

What is the max os upgrade available for power mac g5 w/powerpc processor

What is the max one can upgrade the os on a powerpc power mac g5

Hi, 10.5.8...
Leopard requirements/10.5.x...
    * Mac computer with an Intel, PowerPC G5, or PowerPC G4 (867MHz or faster) processor
minimum system requirements
    * 512MB of memory (I say 1.5GB for PPC at least, 2-3GB minimum for IntelMacs)
    * DVD drive for installation
    * 9GB of available disk space (I say 30GB at least)

Optical Fun for Power Mac G5 - Chosing a Burner

Hi all,
So I have a Power Mac G5 with a burner that is not so great anymore. I burn at 1x for DVDs and on good days, burn a CD at 4x. Time for a new burner you would say. I would agree.
I have a predicament and wondered if anyone suggests a burner to go with. I'm not looking to spend a lot and just want something that would work well and fit nicely.
I found two that might suit my little G5:
Pioneer
http://www.newegg.com/Product/Product.aspx?Item=N82E16827129007
LG
http://www.newegg.com/Product/Product.aspx?Item=N82E16827136119
Those two were Best Sellers at New Egg with nice reviews, but nothing on the Mac.
Does anyone have any other suggestions or anything that worked for you?
Has anyone used the brands above?
Thanks for reading and in advance for the help,
Bryant

Hi. The Pioneer 112D is often recommended in these forums - can't recall any adverse reports. I installed a previous version, the 110D, with no problems - works well.
The installation instructions are here
http://www.info.apple.com/usen/cip/pdf/g5/073-0807.pdf
Installation is a bit fiddly, but not difficult. There are two things to check: that the stand-offs (see Figure 8 of the installation instructions) are the right length to line the drive up with the aperture in the G5 casing - and that you remove the plastic bezel with CD, DVD, etc. on it from the front edge of the tray, so it doesn't catch on the edge of the aperture in the G5 casing - discussed here
http://discussions.apple.com/thread.jspa?messageID=4443213#4443213
If your current drive is a Pioneer, the stand-offs should be re-usable. If not, they may be able to be adjusted by not screwing them in fully, and then locking the thread with Loctite or similar.
The drive should be recognised in Blue Apple menu > About this Mac > More Info > Hardware > Disc Burning (System Profiler). If there are any problems, please post again. Good Luck.

ATA IDE for Power Mac 7200?

Similar Messages

Maybe you are looking for