Athereos wifi gives strange "no such device" errors

I've installed madwifi and udev loads the module (ath_pci) automatically on start... But the Network script complains the ath0 doesn't exist when I boot up:
Error for wireless request "Set ESSID" (8B1A) :
Set failed on device ath0 ; no such device.
Error, ath0: ioctl SIOCGIFHWADDR: No such device
Likewise, ifconfig doesn't show ath0 and iwconfig shows no wireless extensions. But I've got the right stuff in rc.conf:
lo="lo 127.0.0.1"
eth0="dhcp"
ath0="dhcp"
INTERFACES=(lo eth0 ath0)
and in /etc/conf.d/wireless:
wlan_ath0="ath0 essid MyEssid"
WLAN_INTERFACES=(ath0)
Also, I don't know if this is part of the problem but lspci tells me this about my wifi:
03:00.0 Ethernet controller: Atheros Communications, Inc. Unknown device 001c (rev 01)
What gives? Is there a known software bug? Is this unsupported hardware, contrary to what I've read about this laptop?
(Hmm, I haven't tried loading it without the country code. I'll see if that works... No, still doesn't work. Bugger.)
Last edited by Gullible Jones (2007-06-03 21:56:08)

Fivre: try blacklisting the pcspkr module in rc.conf.
Re ndiswrapper: worked out better than I expected... Installed fine, module was able to load, etc. However, wlan0 still doesn't exist. dmesg gives me:
ndiswrapper (ntoskernel_exit:2650): object dbec3de0 type 2 was not freed, freeing it now
ndiswrapper version 1.43 loaded (smp=yes)
ndiswrapper: driver net5211 (,04/05/2007,5.3.0.35) loaded
ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17
ndiswrapper (ZwClose:2194): closing handle 0xdeab25e8 not implemented
PCI: Setting latency timer of device 0000:03:00.0 to 64
ndiswrapper (NdisWriteErrorLogEntry:199): log: C0001389, count: 4, return_address: e051d054
ndiswrapper (NdisWriteErrorLogEntry:202): code: 0xde70b8cc
ndiswrapper (NdisWriteErrorLogEntry:202): code: 0x28
ndiswrapper (NdisWriteErrorLogEntry:202): code: 0xe03a5000
ndiswrapper (NdisWriteErrorLogEntry:202): code: 0xe03a5000
ndiswrapper (miniport_init:271): couldn't initialize device: C000009A
ndiswrapper (pnp_start_device:425): Windows driver couldn't initialize the device (C0000001)
unregister_netdevice: device eth%d/de70b000 never was registered
BUG: at net/core/dev.c:3259 unregister_netdevice()
[<c02bfdcf>] unregister_netdev+0xf/0x20
[<e04cd9bb>] wrap_ndis_remove_device+0x3b/0x200 [ndiswrapper]
[<e04ce39d>] NdisDispatchPnp+0x12d/0xdb0 [ndiswrapper]
[<c011f7d1>] __activate_task+0x21/0x40
[<c0170bbd>] cache_alloc_refill+0x16d/0x510
[<c011f569>] __wake_up_common+0x39/0x60
[<c011fba8>] __wake_up+0x38/0x50
[<e04c7842>] IoAllocateIrp+0x62/0xa0 [ndiswrapper]
[<e04c83e5>] IoBuildAsynchronousFsdRequest+0x35/0x170 [ndiswrapper]
[<e04c7b95>] IofCallDriver+0x55/0xc0 [ndiswrapper]
[<e04ca10b>] IoSendIrpTopDev+0xbb/0x120 [ndiswrapper]
[<e04ca1e3>] pnp_remove_device+0x73/0x1d0 [ndiswrapper]
[<e04ca6b4>] wrap_pnp_start_device+0x1f4/0x290 [ndiswrapper]
[<e04ca795>] wrap_pnp_start_pci_device+0x45/0x50 [ndiswrapper]
[<c01b568f>] sysfs_make_dirent+0x2f/0x50
[<c01b665e>] sysfs_create_link+0x6e/0x160
[<c0235398>] pci_match_device+0xa8/0xc0
[<c0235426>] pci_device_probe+0x56/0x80
[<c028c206>] really_probe+0x66/0x180
[<c028c369>] driver_probe_device+0x49/0xc0
[<c033f49d>] klist_next+0x5d/0xa0
[<c028c510>] __driver_attach+0x80/0x90
[<c028b6ea>] bus_for_each_dev+0x3a/0x60
[<c028c096>] driver_attach+0x16/0x20
[<c028c490>] __driver_attach+0x0/0x90
[<c028ba4b>] bus_add_driver+0x7b/0x1a0
[<c0235604>] __pci_register_driver+0x84/0xd0
[<e04bcbf7>] loader_init+0x107/0x230 [ndiswrapper]
[<e04caaef>] wrap_procfs_init+0x3f/0xb0 [ndiswrapper]
[<e014d0b5>] wrapper_init+0xb5/0xc2 [ndiswrapper]
[<c0148d5d>] sys_init_module+0x15d/0x1970
[<c0104232>] sysenter_past_esp+0x5f/0x85
=======================
ndiswrapper (miniport_halt:335): device de70b500 is not initialized - not halting
ndiswrapper: device eth%d removed
ACPI: PCI interrupt for device 0000:03:00.0 disabled
ndiswrapper: probe of 0000:03:00.0 failed with error -22
usbcore: registered new interface driver ndiswrapper
Time to file a bug on the ndiswrapper website?
(ndiswrapper -l says it's there though:
net5211 : driver installed
device (168C:001C) present
WTF?)
Last edited by Gullible Jones (2007-06-06 03:41:01)

Similar Messages

WS-C6509-E not supporting 256 MB disk. upon inserting message pops up but "no such device" error comes when runing "sh disk0/1:"

WS-C6509-E not supporting 256 MB disk. upon inserting message pops up but "no such device" error comes when runing "sh disk0/1:"
SUP = 720 and 720-3B
00:08:03: %FILESYS-SP-5-DEV: PCMCIA flash card inserted into disk1
Router#
Router#
Router#
Router#sh disk1
%Error show disk1: (No such device)
Router#
Its working fine with 128 MB Disk

but my 128MB disk is working fine in both SUP and both slots..
And this only proves that the PCMCIA slot is not at fault. So this means that:
256mb PCMCIA card is dead; or
256mb PCMCIA card is not standard (non-Cisco)
I do not believe the 256 mb PCMCIA card is not working because it's not formated. Even if it's not formated properly the error message would've been different.

Getting Error Message - mount.ocfs2: No such device while mounting

I am trying to mount an ocfs2 file system. The file system seems to have been created fine but I get an error message when I try to mount it. Here's what I get :
[root@mdcpsdb1 init.d]# ./o2cb status
Module "configfs": Loaded
Filesystem "configfs": Mounted
Module "ocfs2_nodemanager": Loaded
Module "ocfs2_dlm": Loaded
Module "ocfs2_dlmfs": Loaded
Filesystem "ocfs2_dlmfs": Mounted
Checking cluster ocfs2: Online
Checking heartbeat: Active
[root@mdcpsdb1 init.d]# fsck.ocfs2 /dev/sdc1
Checking OCFS2 filesystem in /dev/sdc1:
label: oracle_hr
uuid: f6 23 5e 3b ad bb 49 87 81 a3 cb f0 b7 2a d0 ad
number of blocks: 24416784
bytes per block: 4096
number of clusters: 6104196
bytes per cluster: 16384
max slots: 4
/dev/sdc1 is clean. It will be checked after 20 additional mounts.
[root@mdcpsdb1 init.d]# mount -t ocfs2 /dev/sdc1 /hr_data
mount.ocfs2: No such device while mounting /dev/sdc1 on /hr_data
The same thing happens going through the ocfs2console.
Thanks,
David

Did you get anwer for this error? I got same error. Thanks in advance.

Error: no such device 36A84D5EA84D1DAD

Hi,
I have both win7 professional and ubuntu 11.10 on my t410i.
Everything was ok, till I try onHackMe and it recognize some problems, it deleted my dlls and...After I restarted for finishing the task, my windows couldn't start....I deleted my c drive completely and restored my windows hardly to factory settings. Grub menu didn't change. And now both of Linux and windows works approximately good. But after I choose win7 in grub menu, before win startup I get this error:
"Error: no such device 36A84D5EA84D1DAD
Press any key to continue..."
It passing automatically after seconds, but I want to know what is it and how I can solve it?

HI shahrzad, (This should probably be in the Linux forum)
I'm guessing here, but this is probably because the UUID of the Windows partition has changed.
You might be able to fix it by booting Ubuntu and running update-grub.
Otherwise, try posting in a Ubuntu forum, or googling "ubuntu windows 7 grub Error: no such device uuid changed" or something similar.
[edit] This is just one of the reasons I miss grub legacy.
Good luck,
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Error: no such device: ece4aa52-a24f-4585-a448-f43320f58b05.

So I was installing Arch Linux on my Toshiba Satellite and when I got to the reboot part rather than showing me the normal grub screen so I could pick linux it said"
GRUB loading.
Welcome to GRUB!
error: no such device: ece4aa52-a24f-4585-a448-f43320f58b05.
Entering rescue mode...
grub rescue>
"Can someone PLEASE help me fix this?

Did you run:
# grub-mkconfig -o /boot/grub/grub.cfg
It is almost impossible to help you if it is not clear what you have actually done so far.
I presume you were following the Beginner's Guide to the letter...

Error no such device (after installation)

Dear all,
I'd like to gradually switch to Arch (from Ubuntu) so I decided to install it on a virtual machine (Virtualbox).
I followed the instructions in the "Unofficial Beginners Guide" and I thought I followed all the steps correctly.
The only thing that confused me a bit was the installation of the Virtualbox Kernel modules (to me from the guide it
is not clear if I have to install them in Ubuntu, the system from which I run the virtual machine, or in Arch the system
that is installed in the virtual machine).
Anyway I think I followed the procedure in the right way, and I didn't get any error message during the installation,
but apparently I made something wrong.
When I boot Arch, I get the GRUB menu. I select "Arch GNU/Linux with core repo kernel",
but I get this error message:
error no such device: (device id)
Loading Linux core repo...
error: no such partition
Loading initial ramdisk
error: you need to run the kernel first.
Press any key to continue...
When I press any key I get back to the GRUB menu.
If I select "Arch GNU/Linux, with core repo kernel (Fallback initramfs)"
I get the same error message.
Can you help me understanding where things might have gone wrong?
Thanks a lot in advance for your help,
and hopefully I'll join you soon in this Arch adventure
Best,
Luca

You downloaded it or you tried to flash (with LiveUpdate)?
Try >>clearing CMOS<<.

I am from iran. i can not download from app store. iTune gives me such an error like this : you must download version 11.1 iTune and when i want to do that i can not.

i am from iran. i can not download from app store. iTune gives me such an error like this : you must download version 11.1 iTune and when i want to do that i can not.

Try Here > https://discussions.apple.com/thread/4074945?tstart=0

Compiling Media gives a Device ERROR at 99% in PE 11

I have a 3 hr on my time line and am trying to burn a Blue Ray. It is compiling and at 99% it gives a Device ERROR. The original video was shot on a Canon DSLR camera. My burner is a LG and is external USB 3.0. My OS is Win7 64 Bit and have nVidia card and Intel i7 procesor with 32 GB ram in an ASUS motherboard. I have all the latest drivers for my hardware. The BlueRay disk is 25 GB - Memorex brand. I tried to switch to RiData and same issue. Can you please Help. Thanks in advance.

Below is a copy of a message I sent to Adobe
I am using windows 7 64 bit professional. Lenovo T530 with 8 processors. 115 GB free on Hard drive
My pre11 program will not burn an avchd project to a folder. I have been working with this for 6 days now and I can’t get it to work. I have a project that has 38 m2ts clips from my camera which is about 15 minutes. The clips total about 2.6 GB
I can put all 38 clips into my project and if I don’t do anything to them I can burn the project to avdhd to a 4.7GB folder with no problem. The resulting stream files amount to about 2 GB
I can then add a fade in to the first clip and a fade out to the last clip and then a default cross dissolve transition between each clip in the timeline. Then I can successfully burn that to a 4.7 GB folder.
Then I can make three cuts (one simply deleting one clip and another 2 cutting out parts of two clips). Then I can successfully burn that project.
Then I make about 10 more cuts. When I try to burn this if first goes through the “encoding media” stage and then the “compiling media” stage and then as soon as it starts burning, I get the message “device error and the computer locks up.
I need to know how to fix this.
I checked the timeline and there are no gaps and there is no menu.
Cliff

[SOLVED] [GRUB error] "no such device" "vmlinuz-linux not found"

SOLUTION AT POST #11
I just completed the install process onto a new machine. Grub starts but then returns these error messages.
Booting 'Arch GNU/Linux, with Linux core repo kernel'
error: no such device: ad4103fa-d940-47ca-8506-301d8071d467.
Loading Linux core repo kernel ...
error: file '/boot/vmlinuz-linux' not found.
Loading initial ramdisk ...
error: you need to load the kernel first.
Press any key to continue...
I installed Arch via a flashdrive (sdb), onto SATA port 1 (sda). SDA has a fresh MBR. Unfortunately, I have no way to post my grub config files. What files must I modify to get GRUB to work properly?
fstab: http://sprunge.us/SVMi
grub.cfg: http://sprunge.us/hQCB
Edit: Thread solved.
Last edited by qKUqm3wtY4 (2013-01-31 03:36:43)

SOLUTION
by: jynnantonix
Step 1: Start Arch via boot disc.
Step 2: Connect to internet.
Step 3: Mount partitions.
# swapon dev/sdX
# mount /dev/sdX /mnt
# mount /dev/sdX /mnt/home
# mount /dev/sdX /mnt/boot
Step 4: Chroot
# arch-chroot /mnt
Step 5: Remake grub.conf
# grub-mkconfig -o /boot/grub/grub.cfg
Another Notable Tip by: jynnantonix
If you need to post information from terminal to the internet, use the following:
[insert command here] | curl -F 'sprunge=<-' http://sprunge.us
example: ls -l /dev/disk/by-uuid/ | curl -F 'sprunge=<-' http://sprunge.us
example: cat /boot/grub/grub.cfg | curl -F 'sprunge=<-' http://sprunge.us
Last edited by qKUqm3wtY4 (2013-01-31 04:04:49)

8g touch updated 4.2.1, problems synching apps and music. gives multiple errors; device times out, internal device errors, network times out, duplicate file, too many files open. itunes diagnostics ok. what to do?

have an 8g ipod touch which has had problems trying to play games and downloading update 4.2.1. went to the apple store who kindly downloaded the software update but now can't synch and generates multiple error messages; device times out, internal device error, network times out, duplicate file and too many files open etc etc. have latest i tunes download and diagnostic test ok. what can i do?

Does the ext directory have the php_oci8.dll? In the original steps the PHP dir is renamed. In the given php.in the extension_dir looks like it has been updated correctly. Since PHP distributes php_oci8.dll by default I reckon there would be a very good chance that the problem was somewhere else. Since this is an old thread I don't think we'll get much value from speculation.
-- cj

HP LaserJet Pro 200 color MFP M276 - new - Device error and Cleaning cycle issues

HP LaserJet Pro 200 color MFP M276 - this is a new printer a friend purchased at Staples. It connects WiFi okay and prints when prompted to but it then does a "Cleaning" cycle after every print job. It also displays "Device Error" at the same time. It has been powercycled as instructed and the error continues to reappear and the "Cleaning" cycle continues as well after each and every print job. My friend paid Staples to set up this printer to a new Acer Laptop and D-Link router he also purchased before he brought them home. He was told everything works fine .. they lied .. Laptop and router have no issues .. just the printer. The Laptop sees the printer okay and software is installed without issue. Any ideas why the "Device Error" and "Cleaning" cycle after every print job is happening? He is on the verge of taking the whole outfit back as Staples has not assisted him and instead directed him to download the manuals from HP. Any suggestions are appreciated

Have you tried a hard reset on it? I know you said you power cycled it, but a hard reset is sometimes different than what some people consider a power cycle.
Follow these steps to perform a hard reset on the printer.
1. Press the Power button to turn on the product.
2. With the product turned on, disconnect the power cord from the rear of the product.
3. Unplug the power cord from the wall outlet.
4. Wait at least 15 seconds.
5. Plug the power cord back into the wall outlet.
6. Reconnect the power cord to the rear of the product.
7. If the product does not turn on by itself, press the power button to turn it on.
Try that out and let me know if it helps.
Best of luck,
Kyle
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

PSE8/PRE8 device error when burning DVD

When trying to burn a DVD using PSE8 and PRE8 in Vista Home Premium 64 bit, and now in Windows 7 Home Premium 64 bit, PRE8 stops at 96% burn and gives me "Device error - the target device isn't suitable for use." The DVD will run on the computer and the slideshow stops just short of the end. The DVD will not run on DVD player/TV. I had no such problems using PSE6/PRE4 on Vista setup. Suggestions?

Hi rqferq
There is a separate forum here for Premiere Elements and because the error you are describing would occur when running under Premiere Elements, I recommend that you post your question at
http://forums.adobe.com/community/premiere/premiere_elements

Keep getting Reprovision Device Error

Have an Ipad Mini with Verizon 3G. About two months ago I started getting the Reprovision Device error when logging into my Verizon account on my Ipad to check data usage. Called Verizon. Went through troubleshooting steps of Reprovisioning Device on the Ipad. Didn't solve problem. They told me it could be 48-72 hours and the problem would be fixed. It wasn't fixed. Took the Ipad to a Verizon store. They tried a new Sim Card. Didn't solve the problem either. Took the device to Apple, and they troubleshooted problem. Still wasn't fixed. They replaced the Ipad. Problem still persisted. Called Verizon a week ago and they went through troubleshooting steps and that didn't solve the problem. They said to give it 48-72 hours and they said to call back in five days if the problem still persisted. The problem still exists. Reluctant to call Verizon back because after spending a few hours of time now dealing with them I am starting to lose faith in their ability to even follow-up and/or follow through in order to resolve this problem. So I'm turning to this message board...
Has anyone who has had this problem actually had any luck resolving this issue? If so, what worked? Thanks.

I have the identical issue to David Lyell. More data:
The Apple Store recently replace my iPad Mini due to an urelated issue (microphone not working). Verizon Cellular Data on 1GB prepaid plan had worked fine on the original iPad Mini. I could successfully log into "View Account" from the original iPad Mini.
When replacing my original iPad Mini with an identical WiFi+Verizon 64GB model, I removed the Verizon SIM from the original iPad Mini and placed it in the replacement iPad Mini.
The replacement iPad Mini connected to the Verizon LTE network and sent/received data, fine.
I then went to "Cellular Data"->"View Account" and logged in with the userid/password that I'd used on my previous iPad Mini. What I got:
"Cellar Data Account: Reprovision Device You account has been activated. To finish your device configuration, please go to: Settings->General->Reset->Subscriber Services and select 'Reprovision Account'. If the problem persists please call 800-786-8419 (34415477)."
I clicked "OK," disabled Wi-Fi and followed the above instructions, precisely: No change.
I checked General->About and observed that although I've an IMEI # and other identifiers, my device shows "unknown" for Cellular Data Number.
I phoned Verizon at 800-786-8419 and navigated the IVR tree to technical support.
Following the Verizon Technical Support rep's directions, I:
- Reprovisioned account using instructions identical to the above: No change.
- Repeated above and added hard re-set (holding home and sleep buttons until iPad shuts down and restarts): No change.
- General->Reset->Reset Network Settings: No change (other than my iPad now having lost all stored Wi-Fi authentication credentials for Wi-Fi sites I use)
- Clicked "forgot password" on "View Account" login screen, awaited new temporary password and used new password to re-attempt "View Account" login: No change.
Verizon tech support rep then advised that "this must be a network issue" and advised that he'd created a Verizon network trouble ticket. He told me to wait 24 to 72 hours, after which time Verizon Network tech support would phone me to tell me that the issue had been resolved.
It's now been 24 hours. In light of Mr. Lyell's experience, above, I don't have a great deal of faith that I'll see a solution.
Current State:
- Verizon iPad Mini 64GB running iOS 6.1.3 (Verizon 14.2)
- Successfully sends/receives data on Verizon LTE
- Cannot access Cellular Data Account info via Cellular Data->View Account: Get "Reprovision Account" instructions, instead.
- General->About shows "Unknown" for Cellar Data Number
Any additional diagnostics/possible solutions appreciated!

DVD Burn problem. "Device error - the target device isn't suitable for use"

Hello everyone,
I initially had a lot of problems with PE8. However the nVidia driver update solved most of them.
Just thought it was important to report success as well as failure!
However one problem remains. I get the following error at the 96% mark while burning. "Device error - the target device isn't suitable for use". It is always at the 96% mark and the program is "compiling [something]" when this happens.
Having searched this site I notice that user rgferg posted a similar problem 13 days ago but was redirected to repost in a different place, but never did.
I have tried to burn a 1hr clip 4 times and every time I have selected the slower burn speed (8MB/s) as has been suggested. It seems that inferior media is a culprit, so I have bought some [quality] Verbatim DVD-R media to try in my Phillips SATA optical drive. I am sceptical this will work, but open minded nonetheless. I will give it a whirl when my computer has stopped capturing the VHS I am working on.
Each time the burn failed the disk was automatically ejected and the burn process had actually started and progressed perhaps ~40% or so.
This indicates to me that it is a drive sharing issue, rather than a media issue. Somewhere on this forum it suggests that I go through a 20+ step process and delete/disable every piece of software that can compete with Premiere among other things. IF I do this what do I burn with outside of Adobe? Do I have to get imgburn or whatever it was called? What if I like Nero? Nero 6 has worked great for me for 3 years.
So given I am willing to uninstall my old optical drive burning software, who out there can recommened commercial software that for them creates a painless Adobe burning experience with no errors or conflicts? Perhaps there is another solution that I did not see on this forum?
I am running Windows XP SP3. I have the latest nVidia drivers for my SLI GeForce 7600 GS cards. I have 3 monitors. RAID 0 SATA, 2GB RAM, Athlon X2 5400.
Justin.

OK been working through the list of 20 things Adobe recommends to fix DVD burn error. No luck yet:
system meets minimum requirements
Project size does not exceed disk capacity
successfully burned project to DVD folder -thus skip to step 8.
8. Using new blank media for burning
9. Try different media and DVD burners. Bought Verbatim DVD-R. Don't have another DVD burner. Adobe's supported burner list is VERY short, so of course mine is not on it.
10. Uninstalled Nero 6. Did NOT uninstall Acronis True Image workstation or Lightscribe. These do not access the drive unless I say so!
11. Have not yet disabled startup items and services. This will take a lot of work and will leave to last. Deactivated Spybot thus far.....
12. Disabled IMAPI CD burning COM
13. DMA if available already set. Haven't set this in BIOS yet. I already think it is, but will check next boot.
14. Updated DVD firmware
15. Already updated nVidia drivers
16. Don't have any other DVD drives to disconnect.
17. MPEG workaround. Will resort to if required.
18. Disable Autoplay? XP only has "prompt me each time to choose an action". I have set this for ALL file types.
19. Have NOT refreshed the DVD drivers in the registry. This step involves uninstalling PE8. Will leave this as last resort.
20. Visit forums to see if other have the same problem. Hi guys
So still working through some of the items above.
Can anyone direct me to advice on how to write the encoded files sent to the hard drive, or the VOB files that PE8 failed to burn to a disk? Will the former work with DVD menus?
What a process.
Stay tuned.
Justin.

Error while burning dvd in pre 8.0 "device error-the target device isn't suitable for use."

I am trying to burn a dvd in premiere elements 8.0 but after 96% iam getting this error :
"device error-the target device isn't suitable for use."
I have tried all of these steps according to this link :http://kb2.adobe.com/cps/515/cpsid_51553.html.
System configration :
win vista 32 bit .
Processor :Amd athlon 64 dual core 2.60 ghz .
Ram :3 gb
Graphic card :nvidia geforce 6150 se .
Camcoder model number :JVC gz-hm320.
Format :.mts
Frame size :1920/1080
Frame rate :29.97.
Please look into this problem .
Regards
Manoj Khati

This is a user to user forum, not Adobe support... YOU look into things, based on advice other users are able to give
Things and Software to AVOID when authoring/burning a DVD
Read all links/sub-links to create a "best" burned disc
Start --> http://forums.adobe.com/thread/608660?tstart=0
#2 has WHY Explained http://forums.adobe.com/thread/607390
Plus a Microsoft note http://support.microsoft.com/kb/314060
And another note http://support.microsoft.com/kb/982116

Athereos wifi gives strange "no such device" errors

Similar Messages

Maybe you are looking for