ATI TV Wonder... not making device node?

I purchased an ATI TV Wonder card yesterday. I've been Googling and reading numerous tutorials and I just can't get it to work. There just isn't a device node for it in /dev... no /dev/video0, /dev/v4l/video0, not even a /dev/v4l!
So far, I've changed my /etc/modprobe.conf so that it includes:
alias char-major-89 i2c-dev
alias char-major-81 videodev
alias char-major-81-0 bttv
options bttv card=63 radio=0
options tuner debug=1
alias char-major-81-1 tvaudio
After rebooting, an lsmod showed that none of those were loaded, so I added them (bttv, tuner, tvaudio, i2c_core, and i2c_algo_bit) to /etc/rc.conf as well. Now they are loaded at boot, but there's still no device.
Then, I edited /etc/X11/xorg.conf to load v4l, but that doesn't help either. I also added:
REGISTER v4l/.* PERMISSIONS root.users 660
REGISTER video0 PERMISSIONS root.users 660
to /etc/devfsd.conf (and rebooted to restart devfs), but that didn't help, either.
What do I have to do to get the device to show up? It shows up in lspci (I think):
[kyle@zero ~]$ lspci
00:00.0 Host bridge: nVidia Corporation: Unknown device 01e0 (rev c1)
00:00.1 RAM memory: nVidia Corporation: Unknown device 01ea (rev c1)
00:00.2 RAM memory: nVidia Corporation: Unknown device 01ee (rev c1)
00:00.3 RAM memory: nVidia Corporation: Unknown device 01ed (rev c1)
00:00.4 RAM memory: nVidia Corporation: Unknown device 01ec (rev c1)
00:00.5 RAM memory: nVidia Corporation: Unknown device 01ef (rev c1)
00:01.0 ISA bridge: nVidia Corporation: Unknown device 0060 (rev a4)
00:01.1 SMBus: nVidia Corporation: Unknown device 0064 (rev a2)
00:02.0 USB Controller: nVidia Corporation: Unknown device 0067 (rev a4)
00:02.1 USB Controller: nVidia Corporation: Unknown device 0067 (rev a4)
00:02.2 USB Controller: nVidia Corporation: Unknown device 0068 (rev a4)
00:04.0 Ethernet controller: nVidia Corporation: Unknown device 0066 (rev a1)
00:06.0 Multimedia audio controller: nVidia Corporation nForce MultiMedia audio [Via VT82C686B] (rev a1)
00:08.0 PCI bridge: nVidia Corporation: Unknown device 006c (rev a3)
00:09.0 IDE interface: nVidia Corporation: Unknown device 0065 (rev a2)
00:1e.0 PCI bridge: nVidia Corporation: Unknown device 01e8 (rev c1)
01:07.0 Multimedia video controller: Conexant: Unknown device 8800 (rev 05)
01:0a.0 Ethernet controller: D-Link System Inc DL10050 Sundance Ethernet (rev 12)
02:00.0 VGA compatible controller: ATI Technologies Inc Radeon R250 If [Radeon 9000] (rev 01)
02:00.1 Display controller: ATI Technologies Inc Radeon R250 [Radeon 9000] (Secondary) (rev 01)
I know it's supported because it was working on Ubuntu (but after the dependency hell I went through trying to get kdetv to install I reinstalled Arch). I'm at a loss here... I have no idea what to do next. Anyone have any suggestions?

undeadpenguin wrote:
I purchased an ATI TV Wonder card yesterday. I've been Googling and reading numerous tutorials and I just can't get it to work. There just isn't a device node for it in /dev... no /dev/video0, /dev/v4l/video0, not even a /dev/v4l!
So far, I've changed my /etc/modprobe.conf so that it includes:
alias char-major-89 i2c-dev
alias char-major-81 videodev
alias char-major-81-0 bttv
options bttv card=63 radio=0
options tuner debug=1
alias char-major-81-1 tvaudio
I'm at a loss here... I have no idea what to do next. Anyone have any suggestions?
I've no idea whether this has anything to do with your problem but I noticed that in your /etc/modprobe.conf you've missed your tuner type.
you have:
options bttv card=63 radio=0
options tuner debug=1
I think you should have something like:
options bttv card=63 radio=0
options tuner=5 debug=1
(replace 5 with your tuner type code)
.murkus

Similar Messages

USB Storage devices not being detected - device nodes not created?

Hi,
I've installed Arch Linux 64-bit on my Dell workstation, and it doesn't seem to be picking up my USB storage drives. Kernel version is 3.6.3-1.
When I plug in a drive, I see in dmesg:
[391147.657574] usb 1-8: new high-speed USB device number 6 using ehci_hcd
However, I don't see anything else. There's nothing about creating device nodes, or anything like that.
My output from `fstab -l` doesn't seem to mention anything about USB drives either, just my two system drives.
[victorhooi@arch-precision ~]$ sudo fdisk -l
[sudo] password for victorhooi:
WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.
Disk /dev/sda: 80.0 GB, 80000000000 bytes, 156250000 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x0f2d18e3
Device Boot Start End Blocks Id System
/dev/sda1 * 2048 718847 358400 7 HPFS/NTFS/exFAT
/dev/sda2 718848 156246015 77763584 7 HPFS/NTFS/exFAT
WARNING: GPT (GUID Partition Table) detected on '/dev/sdb'! The util fdisk doesn't support GPT. Use GNU Parted.
Disk /dev/sdb: 80.0 GB, 80000000000 bytes, 156250000 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x3a9c7de5
Device Boot Start End Blocks Id System
/dev/sdb1 1 156249999 78124999+ ee GPT
My output from lsusb:
[victorhooi@arch-precision ~]$ lsusb
Bus 001 Device 006: ID 0930:6545 Toshiba Corp. Kingston DataTraveler 102 Flash Drive / HEMA Flash Drive 2 GB / PNY Attache 4GB Stick
Bus 002 Device 002: ID 413c:2003 Dell Computer Corp. Keyboard
Bus 002 Device 003: ID 04b3:310d IBM Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Output from blkid - both before and after inserting the drive is identical:
[victorhooi@arch-precision ~]$ blkid -o list -c /dev/null
device fs_type label mount point UUID
/dev/sda1 (not mounted)
/dev/sda2 (not mounted)
/dev/sdb1 /boot
/dev/sdb2 (not mounted)
/dev/sdb3 (not mounted)
When I installed my kernel, I saw warnings about fsck.btrfs - not sure if that's related though:
>>> Generating initial ramdisk, using mkinitcpio. Please wait...
==> Building image from preset: 'default'
-> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
==> Starting build: 3.6.5-1-ARCH
-> Running build hook: [base]
-> Running build hook: [udev]
-> Running build hook: [autodetect]
-> Running build hook: [pata]
-> Running build hook: [scsi]
-> Running build hook: [sata]
-> Running build hook: [filesystems]
-> Running build hook: [usbinput]
-> Running build hook: [fsck]
==> ERROR: file not found: `fsck.btrfs'
==> WARNING: No fsck helpers found. fsck will not be run on boot.
==> Generating module dependencies
==> Creating gzip initcpio image: /boot/initramfs-linux.img
==> WARNING: errors were encountered during the build. The image may not be complete.
==> Building image from preset: 'fallback'
-> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
==> Starting build: 3.6.5-1-ARCH
-> Running build hook: [base]
-> Running build hook: [udev]
-> Running build hook: [pata]
-> Running build hook: [scsi]
-> Running build hook: [sata]
-> Running build hook: [filesystems]
-> Running build hook: [usbinput]
-> Running build hook: [fsck]
==> Generating module dependencies
==> Creating gzip initcpio image: /boot/initramfs-linux-fallback.img
==> Image generation successful
error: command failed to execute correctly
I checked the output from lsmod, I dont' see usb-storage, but I do see sd_mod.
Any thoughts?
Cheers,
Victor

WonderWoofy wrote:At least that is one of the very few times you have to reboot. MS just never actually ships you a new kernel. I have never been able to understand why I need to reboot my machine in windows when I install something like a word processor. What is it actually doing?
I have no idea, too. I usually don't reboot even after kernel update, because I always think "Oh, what the heck, I'll reboot it eventually anyway". As we can see, it's not always a good idea .
WonderWoofy wrote:Edit: Don't forget to mark as solved!
We have to wait for @victorhooi to confirm it .

Ati tv wonder video capture card

Recently purchased ATI tv wonder hd 650 usb. The guy at the electronics store told me that it would probably work with mac. I looked online and found to my dismay that there is a separate model for mac. http://ati.amd.com/products/tvwonder650/usbmac/index.html
as opposed to the one i purchased.
http://ati.amd.com/products/tvwonder650/usb/index.html
My question for you knowledgeable people is this: what is stopping the pc version from working with my macbook?
the actual devices appear exactly the same, except one is black and one is white.
is it possible to get it working?
if not, can you recommend another external capture card?

The El Gate EyeTV products work quite well. The ATI product won't work without Mac software compatible with the card and the card would need Mac compatible firmware. I doubt there is any way to get the ATI product to work on your computer, but the best way to find out is to contact ATI's tech support.

Ati TV Wonder Ve

is their and drivers or a way to use the windows drivers on my ATI TV Wonder VE. I bought it some time ago and when I switch over to mac I never got it to work. I heard of ways of using windows drivers on linux with wireless cards I wasn't sure if this would work for Mac as well.
-Mac OS X 10.2.8

I'm not using SP-1, so that's not the problem. I just downloaded the trial version of PowerVCR II, but basically the same thing happens as under MSIPVS Windrv - splash screen and then it stops dead.
In poking around in the Device Mgr, I do have one question maybe someone can answer. Under the entries for the MSI PVS Tuner, Crossbar, and Video Capture - under the Driver details, the following files are listed (in addition to the basic CX88 MSI drivers.
ks.sys
lyuv_32.dll
ksproxy.ax
kstvtune.ax
ksuser.dll
kswdmcap.ax
ksxbar.ax
msh263.drv
msyuv.dll
tsbyuv.dll
vfwwdm32.dll
The files are all version 5.1.2600.0 with the exception of msh263.drv which is version 4.4.3400
I tried looking up those files in the knowledge base at microsoft, and the only references I see to any of those files are under Windows 98, not XP. I'm starting to wonder that since I upgraded from Win98 to XP instead of doing a totally clean install, that these driver files came along for the ride and now are messing things up. (I know I'm probably grasping at straws). So if anyone of you who have a working @nywhere, I would appreciate it if you could take a look.
bobk

HT4085 Some videos that are taken with my iphone's camera are not making sounds, this problem occured today to all videos i record, please help

Some videos that are taken with my iphone's camera are not making sounds, this problem occured today to all videos i recorded starting from today, please help

It also takes time for the photos to be transferred out of your iPhone and into Photo stream on Apple's iCloud servers.
Note that this can't happen if your iPhone is not connected to a WiFi network:
When you enable My Photo Stream on your devices, all new photos you take or import to those devices will be automatically added to your photo stream.
iOS devices: New photos you take are automatically uploaded to your photo stream when you leave the Camera app and are connected to Wi-Fi. My Photo Stream does not push photos over cellular connections.
Macs: Any new photos you import to iPhoto or Aperture begin uploading automatically when you have a Wi-Fi or Ethernet connection. Or you can change your iPhoto or Aperture preferences so that only photos you manually add to My Photo Stream are uploaded.
PC with iCloud Control Panel 2.0 or later: Open a Windows Explorer window and under Favorites select iCloud Photos if you are using iCloud Control Panel 3.0 (or Photo Stream if you are using 2.0 to 2.1.2). Open My Photo Stream. Click the "Add photos" button. Select the photos to import to My Photo Stream, then click Open.
from here: http://support.apple.com/kb/ht4106

Ocrmirror gets added on one node not on another node 11gr2 RAC on AIX 5.3

Hi,
I created another external diskgroup for redundancy and added ocr on to it and got added successfully on node1 but not on another node in a two node cluster,please find the below outputs.
node1:
mvx20b:/>ocrcheck
Status of Oracle Cluster Registry is as follows :
Version : 3
Total space (kbytes) : 262120
Used space (kbytes) : 3064
Available space (kbytes) : 259056
ID : 1640695116
Device/File Name : +CRS_DATA
Device/File integrity check succeeded
Device/File Name : +crs_data1 ------>newly added ocr
Device/File integrity check succeeded
Device/File not configured
Device/File not configured
Device/File not configured
Cluster registry integrity check succeeded
Logical corruption check succeeded
node 2:
mvx21b:/>ocrcheck
Status of Oracle Cluster Registry is as follows :
Version : 3
Total space (kbytes) : 262120
Used space (kbytes) : 3064
Available space (kbytes) : 259056
ID : 1640695116
Device/File Name : +CRS_DATA
Device/File integrity check succeeded
Device/File not configured
Device/File not configured
Device/File not configured
Device/File not configured
Cluster registry integrity check succeeded
Logical corruption check succeeded
mvx20b:/home/gmvmxu1>cluvfy comp ocr -n all
Verifying OCR integrity
Checking OCR integrity...
Checking the absence of a non-clustered configuration...
All nodes free of non-clustered, local-only configurations
ASM Running check passed. ASM is running on all cluster nodes
Checking OCR config file "/etc/oracle/ocr.loc"...
OCR config file "/etc/oracle/ocr.loc" check successful
Disk group for ocr location "+CRS_DATA" available on all the nodes
Disk group for ocr location "+crs_data1" available on all the nodes
Checking OCR device "+CRS_DATA" for sharedness...
Checking size of the OCR location "+CRS_DATA" ...
mvx20b:Size check for OCR location "+CRS_DATA" successful...
mvx21b:Size check for OCR location "+CRS_DATA" successful...
Checking OCR device "+crs_data1" for sharedness...
Checking size of the OCR location "+crs_data1" ...
mvx20b:Size check for OCR location "+crs_data1" successful...
mvx21b:Size check for OCR location "+crs_data1" successful...
WARNING:
This check does not verify the integrity of the OCR contents. Execute 'ocrcheck' as a privileged user to verify the contents of OCR.
OCR integrity check passed
Verification of OCR integrity was successful.
mvx21b:/home/gmvmxu1>cluvfy comp ocr -n all
Verifying OCR integrity
Checking OCR integrity...
Checking the absence of a non-clustered configuration...
All nodes free of non-clustered, local-only configurations
ERROR:
PRVF-4194 : Asm is not running on any of the nodes. Verification cannot proceed.
OCR integrity check failed
Verification of OCR integrity was unsuccessful on all the specified nodes.
SQL> select name,state,inst_id from gv$asm_diskgroup order by inst_id;
NAME STATE INST_ID
MVMXU1_DATA MOUNTED 1
MVMXU1_REC MOUNTED 1
CRS DISMOUNTED 1
CRS_DATA MOUNTED 1
CRS_DATA1 MOUNTED 1------mounted
MVMXU1_REC MOUNTED 2
MVMXU1_DATA MOUNTED 2
CRS MOUNTED 2
CRS_DATA MOUNTED 2
CRS_DATA1 MOUNTED 2-------->mounted
Please let me know where to look or how to add it to 2nd node.
Thanks
Edited by: user9097501 on Oct 21, 2010 6:37 AM
Edited by: user9097501 on Oct 21, 2010 7:10 AM

Issue got resolved with ML "The CRS Daemon Fails to Start with 'my hash ids don't match' in the Crsd.log [ID 855932.1] "
Thanks

IPad is not making any sound

iPad is not making any sound when typing, watching video from YouTube and video from cameroll. I don't even hear when I receive notification. My mom and dad has the same problem on their iPhone 4s. My mom when to apple store to replace for a new phone but do I have to go to the apple store to replace it too? I also tried a restore but it did not work. Please answer!
Thank you

DISCONNECT BLUETOOTH.
After doing all the ridiculous resetting and changing/checking the settings by the advice given on these forums and on YouTube, I finally discovered that if you have your apple device connected to any other device by bluetooth you will not get any audio but by the device it's connected to. How un-awesome is that? Ive always been used to how my android devices work with Bluetooth which is when the system you're connected to is off or in a different mode, you still have audio. That makes perfect sense and is convenient, right? But I thought my brand new ipad was busted when I connected to my entertainment system by Bluetooth and haven't been getting any audio the last few weeks. So basically I need to go into settings every stinking time if I want to hear my game or show my wife a YouTube video. Regretting ever got this overpriced tablet...

HT3702 I continue to be charged on my credit card for purchases I am not making on itunes. I have switched credit cards and this contines to happen. I have reported the problem on each specific purchase. What else do I do?

I continue to get charged on my credit for purchases I am not making on itunes. They are all small purchases such as $4.99, $1.99, $6.99 but have added to almost $300 in total. I keep clicking on them as report a problem. I have switched credit cards but this continues to happen. What do I do? Seems like there is no number to call. Wish I could talk to a person rather than trying to navigate this through the internet.

How are they showing up on your account e.g. are they auto-renewing subscriptions that you haven't stopped : http://support.apple.com/kb/HT4098
Does anyone else have access to your account and/or devices that might be making them ?
If you can't work out where they are coming from then you could contact iTunes support and ask them for help (we are fellow users here on these forums) : http://www.apple.com/support/itunes/contact/- click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption
If they aren't showing on your account's purchase history then you should also contact your card issuer.

Ati tv wonder

I installed aa ATI tv wonder pro.When I run the pc check in multimedia center configuration I get an error that says that my sound card did not pass the test: the clock accuracy is less than .2%. I downloaded the latest drivers for my audigy eax soundblaster sound card but it did not solve the problem. I would appreciate if anyone could help me. Thank you!

don't bother, it's always that with the ATI stability test.

Other remotes in an AirPort Express - ATI Remote Wonder?

I've just bought an AirPort Express, looks like a good little product, but just wondering about plugging my USB remote into it.
I've got an ATI Remote Wonder, which has a small USB receiver, and wondered if there is ever likely to be any support for using this with the AirPort, through the printer port? I know that there is the Apple remote available, but would prefer to use mine (radio frequency wireless rather than infrared).
Does anyone rate my chances of getting it to work / someone writing a software update to support it?
Cheers
David

Errr... that was about Client Mode, not connecting remotes to it.
As far as I can tell from a lot of time looking from Google, there isn't any support for it currently (neither official nor third party). I've tried to do the Feedback suggested to Apple, but there wasn't a category for AirPorts so no idea if they'll ever get it through the laptop Feedback link I used :o(
Alternatively, maybe if I tape the transmitter to my laptop it'll work too... just not quite as elegant a solution!
David

Libusb requires write access to USB device nodes [SOLVED]

Hi,
I have used gtkam to upload photos from my camera for some time now - though on an occasional basis because I don't take very many photographs. On attempting to use it today for the first time in a while I find that I can't do so as a user.
"libusb couldn't open USB device /dev/bus/usb/003/002: Permission denied.
libusb requires write access to USB device nodes."
Can anyone tell me how to fix this please?
Last edited by perseus (2011-01-03 22:46:46)

I did some additional research and found the udev file for libgphoto2: /lib/udev/rules.d/40-gphoto.rules
I also realized that my camera is not listed in that file:
Bus 001 Device 011: ID 04a9:31f6 Canon, Inc.
I tried to add this device and vendor ID to the list of Canon cameras and restarting udev
ATTRS{idVendor}=="04a9", ATTRS{idProduct}=="31f6", ENV{ID_GPHOTO2}="1", ENV{GPHOTO2_DRIVER}="proprietary", MODE="0660", GROUP="camera"
# killall udevd && udevd -d
Unfortunately this didn't work out.
I also tried to add the following line to that gphoto udev file as suggested by Digital Cameras wiki
PROGRAM="/lib/udev/check-ptp-camera", MODE="0660", GROUP="camera"
Still nothing after restarting udev...
My next try was adding the camera to the HAL fdi file /usr/share/hal/fdi/information/20thirdparty/10-camera-libgphoto2.fdi and restarting HAL.
This didn't help either.
I'm getting short on clues...
For sure I can access the camera as root but that's not what I want to do.
!! UPDATE !!
I was dumb. PTP cameras are handled separately so I don't need to have the USB IDs in the udev or fdi files.
So the question is why PTP cameras are not handled correctly, why the group for these devices is not "camera"?
Last edited by KoS (2011-01-03 22:19:57)

My right ear pod is not making as much noise as the left ear pod

With no damage at all to the head phones, one of the ear pieces is not working as good as the other. In this case left is louder than right. Before this pair of ear pods I had the same issue with the pair before, except that time, it was my left not making as much noise. I'm sure it's in properly and there is no damage, but why has the headphone gotten worse!?

connect the headset to a computer or another device which have a mini jack connector like the iphone
to see if the issue is there too
and or connect another mini jack headset (most headsets are) to the phone
one or both of these 2 things should show you if your headset or your phone is broken
warrenty covered everthing in the box phone and headset

I have put my head phone jack surcuely in but it's not making much sound. I have turned it up the whole way but it only gives me a tiny whiny little bit of sound. It only does this if I push it really far into my ear!!! Help!

I have put my head phone jack surcuely in but it's not making much sound. I have turned it up the whole way but it only gives me a tiny whiny little bit of sound. It only does this if I push it really far into my ear!!! Help!

I own the movies and I want them to stay in my iTunes library basically forever.
But in both cases the file name no longer shows in the movie list, so I don't know how to re-download it from the Cloud.
iTunes prefs > Store > Show iTunes in the Cloud purchases.
This will show all your iTunes purchases in your library with a cloud icon down arrow. Click the icon to redownload or click on Play to stream without downloading.
Also see this , -> Download past purchases
and techncially, you don't "own" the movie, You simply have a license to use it.
Yet the first thing iTunes does when you hit the delete key is tell you that it will remove the movie forever from all devices and the library.
Actually, no it does not tell you that.
FYI: You should keep copies of all yoru iTnue spurahses as the labels/movie studios/copyright owners can pull their product at anytime and it won't be available to redownload.
Suggestions here -> http://www.apple.com/feedback/

Confused about the /global/.devices/node@1 filesystem

This is the first cluster I have tried to build on Vmware with two shared scsi virtual disks.
The above filesystem appears on both nodes, but there is none called /global/.devices/node@2 visible.
The shared storage ( scsi ) does not work , if I create a file on one node it is invisible on the other and vice versa.
But If I put a file in /global/.devices/node@1 on one node I can see it on the other. But I thought /global/.devices/node@1 was a LOCAL filesystem.
I have trawled through lots of documentation , but nothing seems to give me any answers.
Can anyone give me an explanation or refer me to any docs relevant to this. Thanks !
George

Simple question.
Should I see a mounted filsesystem of /global/.devices/node@2 on the other node ? Does the absense of this indicate a problem ??
Now getting the following error when trying to configure ha-nfs.
The shared disks are definately visible to the operating system on both nodes :
## Define File-System Mount Point ##
Default Mount Directory: /shared
Raw-Device Path: /dev/did/rdsk/d2s0
ERROR: The raw-device path that you specified is not accessible from all
nodes that can master the highly available storage resource. Specify a
different path, change the nodes that can master the highly available
storage resource, or add the missing nodes to the node list of the device.
George

Cluster /global/devices/node@X mount problem.

Hi,
I have just installed sun cluster 3.2. It is a simple installtion and cluster contains only two servers and one sun storage.
After installation, i realised that the name of the metadevice on tha servers were the same, so only one of them mounted under /global/devices/node@X, and the other were didn't.
Then i re-create metadevice on the second node with another name. After re-creation /global/devices/node@X
fs weren't mounted, when node were rebooted.
there was various error on the console, but i couldn't resolve that problem.
I can mount global/devices/node@X with mount command. But it's not mounted automaticaly in reboot time.
# mount global/devices/node@X is running perfectly.
The error shown in reboot time are as follows;
The /global/.devices/node@2 file system (/dev/rlofi/1) is being checked.
WARNING - Unable to repair the /global/.devices/node@2 filesystem. Run fsck
manually (fsck -F ufs /dev/rlofi/1).
Mar 18 13:35:12 svc.startd[8]: svc:/system/cluster/scmountdev:default: Method "/usr/cluster/lib/svc/method/scmountdev start" failed with exit status 32.
The /global/.devices/node@2 file system (/dev/rlofi/1) is being checked.
WARNING - Unable to repair the /global/.devices/node@2 filesystem. Run fsck
manually (fsck -F ufs /dev/rlofi/1).
Mar 18 13:35:12 svc.startd[8]: svc:/system/cluster/scmountdev:default: Method "/usr/cluster/lib/svc/method/scmountdev start" failed with exit status 32.
The /global/.devices/node@2 file system (/dev/rlofi/1) is being checked.
WARNING - Unable to repair the /global/.devices/node@2 filesystem. Run fsck
manually (fsck -F ufs /dev/rlofi/1).
Mar 18 13:35:12 svc.startd[8]: svc:/system/cluster/scmountdev:default: Method "/usr/cluster/lib/svc/method/scmountdev start" failed with exit status 32.
mount: I/O error
mount: Cannot mount /dev/lofi/126
lofiadm: could not unmap device /dev/lofi/126: No such device or address
mount: I/O error
mount: Cannot mount /dev/lofi/126
lofiadm: could not unmap device /dev/lofi/126: No such device or address
WARNING: Cluster startup could not remove the existing
lofi device associated with /.globaldevices. Try manually
removing the device association. Global devices will
be unavailable until this error is fixed.
Mar 18 13:36:10 tstclstr1 svc.startd[8]: system/cluster/globaldevices:default misconfigured: transitioned to maintenance (see 'svcs -xv' for details)
Mar 18 13:36:10 tstclstr1 Cluster.CCR: /usr/cluster/bin/scgdevs: Filesystem /global/.devices/node@2 is not available in /etc/mnttab.
Mar 18 13:36:10 tstclstr1 last message repeated 1 time
Mar 18 13:38:50 tstclstr1 svc.startd[8]: platform/sun4u/dscp:default failed: transitioned to maintenance (see 'svcs -xv' for details)
The output of the svcs -xv;
root@tstclstr1 # svcs -xv
svc:/system/cluster/globaldevices:default (Suncluster globaldevices service)
State: maintenance since 18 Mart 2010 Perşembe 13:36:10 EET
Reason: Start method exited with $SMF_EXIT_ERR_CONFIG.
See: http://sun.com/msg/SMF-8000-KS
See: /var/svc/log/system-cluster-globaldevices:default.log
Impact: 3 dependent services are not running:
svc:/system/cluster/mountgfs:default
svc:/system/cluster/clusterdata:default
svc:/system/cluster/ql_rgm:default
svc:/application/print/server:default (LP print server)
State: disabled since 18 Mart 2010 Perşembe 13:34:46 EET
Reason: Disabled by an administrator.
See: http://sun.com/msg/SMF-8000-05
See: man -M /usr/share/man -s 1M lpsched
Impact: 2 dependent services are not running:
svc:/application/print/rfc1179:default
svc:/application/print/ipp-listener:default
svc:/system/cluster/scmountdev:default (Sun Cluster scmountdev)
State: maintenance since 18 Mart 2010 Perşembe 13:35:12 EET
Reason: Start method failed repeatedly, last exited with status 32.
See: http://sun.com/msg/SMF-8000-KS
See: /etc/svc/volatile/system-cluster-scmountdev:default.log
Impact: This service is not running.
svc:/system/cluster/scsymon-srv:default (Sun Cluster SyMON Server Daemon)
State: offline since 18 Mart 2010 Perşembe 13:34:49 EET
Reason: Dependency svc:/application/management/sunmcagent:default is absent.
See: http://sun.com/msg/SMF-8000-E2
Impact: This service is not running.
svc:/platform/sun4u/dcs:default (domain configuration server)
State: maintenance since 18 Mart 2010 Perşembe 13:38:51 EET
Reason: Restarting too quickly.
See: http://sun.com/msg/SMF-8000-L5
See: man -M /usr/share/man -s 1M dcs
See: /var/svc/log/platform-sun4u-dcs:default.log
Impact: This service is not running.
svc:/platform/sun4u/dscp:default (DSCP Service)
State: maintenance since 18 Mart 2010 Perşembe 13:38:50 EET
Reason: Start method failed repeatedly, last died on Killed (9).
See: http://sun.com/msg/SMF-8000-KS
See: man -M /usr/share/man -s 1M prtdscp
See: /var/svc/log/platform-sun4u-dscp:default.log
Impact: This service is not running.
{noformat}root@tstclstr1 #
</pre>{noformat}

Thanks for the reply,
It used to be the same metaset name on the second server, which several folks have run into when installing SC on the 2nd node. So I renamed it when booted into no cluster mode using metarename. I then updated the /etc/vfstab with the new name, this is it in /etc/vfstab:
/dev/md/dsk/d26 /dev/md/rdsk/d26 /global/.devices@2 ufs 2 no global
And yes if I change "global" to "-" then it mounts. When the 2nd node boots up, it cannot mount /global/.devices@2 with it set to global so the boot halts, I do ctrl-D to continue. Then I try a regular mount from root and I get the "no such file or directory" message.
If I do a metastat d26 it shows it to be OK on both submirrors.
The name of the metadisk on the first node is d160. And the 2nd server is able to mount that from the global option on the first server.
Thanks,

ATI TV Wonder... not making device node?

Similar Messages

Maybe you are looking for