ATP as per order type ??

Hi All,
Can anyone throw some light on whether it is possible to adjust my ATP check settings based on my order type?
What is want is that for normal sales order, my ATP check settings will not take the safety stock into account
BUT
For rush orders, i want that the system should also consider the safely stock as being available.
So based on my order type, i want to have different Checking group and checking rule combination.
Was wondering if i can use the ATP exit to map this req.
Do let me know.
Thanks

Hi Arijeet,
In Sales and Distribution, the checking rule is specified internally within the system and cannot be changed. (copy/paste from customizing documentation).
So it will always be 'A' (SD Order) when entering the Sales Order.
There is a "rules based availability check" in SD customizing, but it only works with APO.
A real shame, because it would probably allow you to have different ATP behaviour for standard and rush sales orders.
If I had to do it, I would probably:
Create a new checking rule
Make a system modification to overcome SAP limitation and have use the new checking rule in case of rush orders
Customize the availability check control for the Checking Group for Availability Check (maybe 02, individual requirement) and the new checking rule, so that it takes in account the safety stock.
Have a coffee to celebrate if it works fine at first try
I know it's a modification, but in case the modification get's overwritten in case of upgrade, the system would not use the safety stock anymore for the rush orders, until the modification is applied again. But that would not be critical, because the system would still be working in the standard way (checking rule 'A').

Similar Messages

ATP determination per Order Type

Hi
My customers request that for the same material, they want to have a different number of stock per order type.
For example, for Material A, they also always keep stock of 20. If they have more stock than 20, they want to deliver to the customer.
However, this is limited to consignment order.
They don't want to limit the stock for Standard Order, so they always want to sell their available stock if more than 0.
I know that you can set 'Safety Stock' in MRP2 view in Material Master, and uncheck 'Include safety stock' from the combination of availability check and checking rule in OVZ9.
But I cannot configure this rule per Sales Order type.
Is there any way I can customize per sales order type?
Am I missing any customization?
Thank you in advance,

hi,
it can be done through userexit, try one of the below userexits
User exits in program FV45VFZY
USEREXIT_QUOTA_KEY_VALUE
User exits in program RV03VFZZ
USEREXIT_AVAILABILITY_IN
USEREXIT_AVAILABILITY_OUT
Regards,
Santosh

Choosing fields as per order type

hi friends...we have an requirement of making the fields mandatory according to the PM rder type.
for e.g : we want to make the " equipment " field mandatory for all types of PM orders except "general order".
actually as the tcode for creating the all types of PM order is IW31 , can we make the "equipment" field mandatory for all PM order type except when user create a general order for the equipment.

Hi Achal,
go to
SPRO >>> Plant Maintenance and Customer Service>>>Maintenance and Service Processing>>>Maintenance and Service Orders>>>>Define Field Selection for Order Header Data (PM) >>>> (select) Field Selection for Order Header Data and Reference Object >>>> (select) Equipment Field >>> Double click on it >>>> (you wil find influencing field) order type (click on it)>>>>> (at top) New Value>>> Add you order type and required against them.
Your problem will be solved.

Production Stor Loc (Prod Order GR location) per Order Type

Dear Gurus,
Is there a standard way where we can set the GR storage location of an order depending on the Order Type? I know this is possible with the use of prod version, but other than that, any other possible way?
ex.
Order Type 1 = GR Loc A
Order Type 2 = GR Loc B
Thank you!

Hi,
Other wise you can write user exit for you're scenario by maintaining in the Maintenance table like Order types and storage locations.
when ever you release or save the order the respective storage location must go and sit in the Storage location of the goods receipt tab in the production order.
alternative is user have to key in manually in the good receipt tab of production order.
PPCO0005 user exit may be helpful
PPCO0006
Regards,
Ravi

Exchange rate field greyed out when i use custom PO order type

Hi!
Upon creation of PO using SAP standard order type NB, the field exhange rate is editable. While when i used csutom PO order type, it is greyed out. How can we edit this? Where is the configuration of the exchange rate per order type?
If this is configured in IMG please include path, on how exchange rate is configured.
Thanks a lot.

Hi,
Spro>Materials Management>Purchasing>Purchase Order>Define Document Types
Here check the "Field Selection Key" against the PO doc type
(ex: Standard NB doc type the "Field Selection Key" would be "NBF")
Then go to
Spro>Materials Management>Purchasing>Purchase Order>Define Screen Layout at Document Level
Select the " Field Selection Key" of ur doc type..Just Double click on that
then check for field " Exchange rate "
against that field you can see three options, Reqd.entry Opt. entry Display...
Here tick the field "Opt. entry", So that You can get this field in Change mode in ME21N trx...
Thx
Raju

Assigning user status to order type

Hi All,
There is an query. Can I assign 2 user statuses to an order type?
regards,
Mohit Goyal

Hi Mohit,
A user status is activated by the user and can be created as an addition to the existing system status. You can define and
activate any number of user statuses. To define a user status, you need to have created a status profile, which is created per order type in Customizing
Hope clear to you.
Regards,
R.Brahmankar

Transaction for characteristics per plant / order type

Transaction for characteristics per plant / order type
We need a new transaction for customizing feature
Characteristics per plant and order type
ZVP_PRNTCHARCON
example one screen - one dimension characteristics, other 15 operations
Thanks

Hi Tarun,
Standard SAP does not support char specific to plant & order type. You need to devlop some custom transaction. If you are looking more details, request you to share the business requiremnet, details etc.
Thanks...Sanjay

CRM ATP Checking using R/3 & Immediate Delivery for Sales Order Type in R/3

We use CRM 4.0 and R/3 6.4.
I've configured CRM to do ATP Checking using R/3. The ATP Checking works fine if I change the Sales Order Type in R/3 to NOT create a delivery immediately.
I'm trying to find out if the combination of turning on CRM ATP using R/3 and Create Delivery Immediately for a Sales Order in R/3 are supposed to work properly together.
If anyone knows and or has this working, I'd like to know.
Thanks.
Donna

Hi ,
I am working with R/3 and I have the same problem.
Complete delivery is flowing down from the customer master for all order.
And then we have items on order which have different shipping point.
They all fail in background delivery and give the error ' customer requested complete delivery'.
Is there anyway to override this?
Any help will be really appreciated.
regards
BgS

As per scope of list order type has changed in ME57

Hi,
I have created PR in doc type NB and using t-code Me57 i have tried to create PO, with selection scope of list A it is going correct means as per the requirement order type shows ZAB and when i select scope of list ZALV which has customized then tried to create PO now order type shows NB.
Please guide me.
Thanks
Shital

Hi,
I have tried this and scope of list A is working but ZALV is not working
Thanks
Shital

GATP/ATP Check for Different Order Types for same material

Hi :
I have a material code X for which 2 different type of Sales Order (Say A and B )needs to be created.
For Sales Order Type A the atp check needs to be done in APO through GATP for material code X.
For Sales Order Type B the atp check needs to be done in SAP R/3 ECC 6.0 through availabilty check functionality for same material code X.
It is not possible to create seperate material codes to carry out atp/gatp check seperately in R/3 and in APO.
In real time the atp and cumulative atp position should be same in R/3 and in APO.
Please let me know solution for this issue.
With Regards
Ashish Gupta

Hi Ashish,
Can you share with us as to how you were able to solve this issue. I have a similar issue like yours and I am totally clueless as to what needs to be done..
My scenario goes this way:
I have to modify the Schedule line dates for a GATP material according to a newly created date which I calculate based on the Route Schedule id (VL51, VL52) and display the same in the Sales Order schedule line items.
Also can I get a new set of schedule line dates from the APO system for a date which I calculate based on the Goods Issue date - VALW-AULWE in any exit using a FM or a BAPI?? so that I can get these dates and populate the same in the Sales Order Schedule line??
Thanks in advance,
Susanth

Default document currency as per document type for sales order

Dear All,
We are facing problem in Default document currency as per document type for sales order,
Our requirement is not to give currency in customer master & set it as default document currency as per document type,
for example: Document type 'OR' default currency 'INR',
                     Document type 'ZEU' default currency 'EUR',
                     Document type 'ZUS' default currency 'USD',
                     Document type 'ZNP' default currency 'NRP,'
                     Document type 'ZAF' default currency 'RAND,'
Is it any how possible in standard setting ?,
Regards,
Sai

Hi,
The system proposes the sales document currency from the customer master record of the sold-to party. You can change the currency manually in the document or change in currency in customer master. If you change the currency, the system recalculates prices for the entire document.
to determine different currrency in sales docuement you need to write an user exit and then overwrite the docuement currency copied from customer master. Try user exit 'USEREXIT_MOVE_FIELD_TO_VBAK' under include MV45AFZZ for this change.
with regards
vivek.

Delivery Split as per Sales Order Type

Dear Gurus,
We have 2 sets of Sales Order:
1) Normal Orders of type ZA1, ZA2, ZA3
2) Return Orders of type ZR1, ZR2, ZR3
The requirement is like this:
We want to have combined Deliveries for Normal Orders of type ZA1, ZA2, ZA3 and separate deliveries (i.e. 1 to 1 relationship) for Return Orders of type ZR1, ZR2, ZR3.
Please help.
Regards,
Rakesh

Option 1:
You can use userexit in mv45afzz to clear "order combination" flag in return order.
If "order combination" flag is not activated, you always have one-to-one relationship between SO and delivery.
Option 2:
Delivery split is caused by different delivery header data. (LIKP)
There is a field LIKP-ZUKRL.
This field can be used to control delivery split.
You just need to set this field in your own copy routine, to decide whether to split the delivery.
For example:
For return order type, you can fill this field with different value to lead to delivery split

Standard Report - ATP Failed Sales Orders

Please let me know if there is a standard report to get the list of ATP failed sales orders.
In a case where customer requested delivery date has not confirmed and a new delivery date confirmed which leads another schedule line of the material.
My requirement is to get the list of all the ATP failed sales orders, where we have two different schedule lines for a material under Item level u2013 u2018schedule linesu2019 tab view.
Your time highly appreciated.
Thanks & Regards,
Victor.

Hi,
Proceed as below:
- Go to SE16
- Input VBEP
- Input ' 01 to 02' in Schedule Line Number field
- Input other data as per your requirement or you can add more fields in selection from settings
- Then execute
From above you can get all the documents for which there were two schedule lines generated.
Hrishi

Regd creation of New Sales Order Type - Credit Memo Request

Hello Gurus,
I have created a New Sales Order Type as per the given requirements. This is a Credit Memo Request. I have done all that are needed from SD perspective.
Can you please let me know what needs to be done from FI-CO perspective when a New Sales Order Type is created and this is a Credit Memo Request. If some one can let me know the customizations that needs to be done it will be very helpful for me.
Thanks,
SNK.

Hi,
As per my understanding, there is nothing to be required from FI-CO perspective, in case when you defined a document type in SD.
During the sales order processing the SD-FI interface happenes for following activities
1) Credit check (In case you use Credt management)
2) Tax determination
For more knowledge
go through the link given below.
http://www.sap-img.com/sap-sd/link-between-sap-sd-mm-and-fi.htm
Hope it helps,
Regards,
MT

New order type creation ?

Hi,
While creating a new order type what points we need to remember ? And what information we need to get from the user.
As per my knowledge i can create the order type as
01) Define order types
02) Order type dependent parameters
03) Define number range to the order
04) Scheduling parameter
05) Conformation parameters for order.
Other than this is there any other points we need to consider.
Please guide me.
Regards,
Mastan.

Hi Mastan,
Added to experts suggestion also refer the below.
PRODUCTION ORDER CONFIGURATION STEPS
Production Order Type Selection - ERP Operations - SCN Wiki
Thanks & Regards,
Ramagiri

ATP as per order type ??

Similar Messages

Maybe you are looking for