Production Stor Loc (Prod Order GR location) per Order Type

Dear Gurus,
Is there a standard way where we can set the GR storage location of an order depending on the Order Type? I know this is possible with the use of prod version, but other than that, any other possible way?
ex.
Order Type 1 = GR Loc A
Order Type 2 = GR Loc B
Thank you!

Hi,
Other wise you can write user exit for you're scenario by maintaining in the Maintenance table like Order types and storage locations.
when ever you release or save the order the respective storage location must go and sit in the Storage location of the goods receipt tab in the production order.
alternative is user have to key in manually in the good receipt tab of production order.
PPCO0005 user exit may be helpful
PPCO0006
Regards,
Ravi

Similar Messages

I purchased premiere elements 13. I followed the instructions. Loged into my account. Located my order number, but can not find the order detail page to download my product

I purchased premiere elements 13. I followed the instructions. Logged in to my account. Located mu order number but could not find the order detail page to click the download your product button. I was also asked to download the Akamai download manager which i don't understand why. Also It said that once the manager was installed the download would appear in the browser which it never did. So, I have no idea if it did download or not. Not sure what else I can try. Would love some help.

The Akamai download manager is used to download the software you purchased. Try the download resources below. The second one does not use the download manager.
PE 10, 11, 12,13 - http://helpx.adobe.com/premiere-elements/kb/premiere-elements-10-11-downloads.html
You can also download the trial version of the software thru the page linked below and then use your current serial number to activate it.
Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site and have cookies enabled in your browser or else the download will not work properly.
Photoshop/Premiere Elements 13: http://prodesigntools.com/photoshop-elements-13-direct-download-links-premiere.html

HT4059 Receive email for store, book I ordered is now available to download, click on download per order now, but nothing happens.

Receive email for store, book I ordered is now available to download, click on download per order now, but nothing happens.

iTunes Store Support
http://www.apple.com/emea/support/itunes/contact.html

Apple Store flaw ? Limit two per order = Limit two per customer ?

I have previously bought 2 iPad during US launch date(Online) while visiting in US and later moved to Canada and purchased 4 orders(2 each) of iPad in Apple Store Canada(Online) during its launch date. All my order has been canceled due to purchase of more than 2 iPad. When you navigate the apple online store, first it mentioned 2 per order and when you add 2 ipads to the cart and checkout , there is nowhere mentioned about 2 per customer. So now I am left with no iPad in Canada. Customer serivce says doesn't matter Canada or US , its only limited 2 per customer per year.
Am I being treated fairly or is this bs?
So this is what the customer service have to say :
- 1 customer can only purchase 2 iPad in a year , does not matter anywhere.
- purchasing multiple ipad would be detected as reseller and all order will be canceled
- they found that I purchased 2 ipad in US couple weeks ago and therefore no longer eligible to purchase in Canada or anywhere else, doesn't matter if you are reside in Canada.
- once order been canceled by the system, can not be restated
iPad 3G in US is AT&T and Verizon
iPad 3G in Canada is Rogers/Bell/Telus
Message was edited by: DrAeroSpace

Whether you're being treated fairly or not will depend on who is being asked. If you ask the person who's been waiting for an iPad 2 for days, then Apple limiting you to two iPads total for now rather than letting you purchase two every time you order is quite fair. You obviously will have a different viewpoint. I'm certain that any restrictions will be lifted once the supply catches up with the demand, something that may take some time (the problems in Japan won't help matters).
Anyway, these forums are for technical questions, not Apple policy complaints. Do you have a technical question that we, your fellow users, can help you with?
Regards.

Order number: {removed per fourm guidelines} - Very pathetic experience

With the help of social media, I want to bring the very pathetic experience I had with best buy this festival season.
Here is the brief details for my case Order number: {removed per forum guidelines} Order date: 12/25/2014. I ordered brand new Samsung smart LED TV.
First I have been billed more than I have placed order online. When I called customer care they told sorry for it and told that bill has been adjusted and provided me reference number. Second I received the order with missing stand. When I called to customer care I have been informed that may be product is shipped by mistake as open box and they will give me 40 dollar gift card and replace the item. But till date after writing around 15 email and 20 calls still my issue is not resolved. I have escalated the issue to escalation team/supervisor also but seems like there is no process for escalation.
Till date issue is not resolved and neither I get the gift card not I got the correct bill. I will not recommend anybody to purchase any product from best buy.
I was believing that best Buy is global brand and we can trust but seems like there is no process for escalation and they don’t care about any customer any more.

Hello arvindstring,
I apologize for the lateness of my reply. We've been playing catch up on the forum ever since Thanksgiving, so I appreciate your patience while waiting for assistance. It’s disappointing to hear your TV arrived without a TV stand, especially as it was purchased during the holiday season. As it seems there might be a few different issues surrounding your order, I’d be happy to look into this on your behalf.
Using the email address provided to register on the forum, I pulled up your account, and I see that you’ve reached out to us quite a few times for assistance. As I’d like to take this time to fully explain every issue you have clearly detailed, I’ve numbered out each issue you’ve brought to our attention.
1)      Billing Issue: After looking at your online order, I see you purchased your Samsung TV for $349.99 (before tax). When looking through your account, you mentioned the TV was supposed to be on sale for $329.99 on the day you purchased it. Using the SKU for the TV, I pulled up your item in our internal systems, and I was able to confirm the TV’s purchase price was $349.99. This could explain why you didn’t see the price adjustment on your billing statement.
2)      $40 Gift Card: Please know that until you mentioned this gift card to us in one of your previous emails we have on file, we don’t have a record of offering you this credit. This may be why our agents are confused when you keep referring to this amount.
3)      Missing Stand: While the order reflects a brand new TV was delivered to you, mistakes do occasionally happen, and I apologize if you incorrectly received an open box item. In order for us to correct this, it appears we provided you a return label on 1/05 and attempted to reship you a new TV at no cost to you. However, we have canceled this reshipment upon your request, as you wished to receive the aforementioned $40.00 gift card.
As previously advised by our call center agents, please know that today is the final day you may return or your TV underneath your Return & Exchange Promise. In order to make sure you meet this deadline, please visit your local store for assistance or go to your local UPS hub with the return label we provided you.
Respectfully,
Alex|Social Media Specialist | Best Buy® Corporate
Private Message

APO: RRP3 automate Production order creation from planned order ?

Hi everyone ,
I have got a business requirement in APO where in Open sale orders uploaded in R/3, needs to be converted to Planned order and subsequently to Production order in APO-PPDS tcode RRP3 at all stages. They want to automate this process rather than doing it
manually.
Can anyone tell how is this possible . Any BAPI or function module available to do this . Please help.
Regards,
Syed

Hi,
1.You need to run the heuristics Planning of standard lots SAP_PP_002 in /SAPAPO/CDPSB0 by specifying the time profile
and strategy profile, planning version and propagation range, product and location.
2. Convert PPDS Planned Orders created to process orders thru /SAPAPO/RRP7 by specifying the product location start date of the order for production order creation.
Out put of step 1- For sales order requirement, PPDS Planned orders gets created.
Out put of step 2- PPDS Planned orders are converted to production orders.
Thanks,
nandha

Block creation of multiple prod. order against single sales order in CO08

Hi All,
We have a requirement of blocking the creation of multiple production order against single sales order in CO08 if the production order is already created for that item.
How to achieve this?
SmanS

Hi,
you need to check if any user exit is there which will check order haeder table for the said sales order if any Prod Order exist for the same and flag custome error whicle prod order save.
Pls revert if you need any further information.

Issues to Production Orders created from Sales Order

We have multiline Sales Orders that create a Production order for each sales order line (can be up to 70 or 80 per SO). We normally backflush these via multiple MB1A transactions after the SO has been completed. It is a lot of work doing the required issues to reduce stock levels and consequently they are always "late" being done and the stock is always out of date until the movements (type 261) are processed - generally monthly!!
As a result, an Access Database has been created that reduces stock in that by entering the SO number and this is used for Stock enquiries. I would like to get rid of this Access database so as I'm sure other people have hit this same problem, is there a way of doing the same in SAP i.e. enter SO number and then relevant stocks are reduced accordingly.
Any help would be appreciated.
Thanks in advance
Jim

Hi,
I am not clear why you are manually doing the process? When the production order is confirmed for each operation (CO11) the goods movement should be posted then, backflush selected in work centre or in the production order.
Any failures can be processed via COGI rather than a database.
Thanks.

I want to reinstall our Adobe Acrobat XI Pro because we have begun to get error messages. I followed the initial instructions but when I logged in I couldn't find "My Orders" page which is required to locate my order and install. Any ideas?

I want to reinstall our Adobe Acrobat XI Pro because we have begun to get error messages. I followed the initial instructions but when I logged in I couldn't find "My Orders" page which is required to locate my order and install. Any ideas?

Barbara,
If you are looking for your serial number, sign in to your Adobe account. On the Manage Accounts page that appears, all of your registered products and their serial numbers are listed in the Plans & Products section. For more information on locating serial numbers,please see Find a serial number
Here is the link to download and install the software:
Acrobat XI, X
Pattie

Split valuation based on stor. loc.

Dear Guru,
Please guide me how may I configure split valuation based on stor. loc. My company in multi level marketing (MLM). We have stor at Brunei as well. Our business set different price if any stocks parked at Brunei stor. loc.
Exp: Material A - RM1 at M'sia stor loc.
- if this material transfered to Brunei branch, it should calculate as RM1.50
- so stor. loc. should shows different valuation
I need to configure this for existing material. Bus. use PO, GR & IR for this procurement.Please assist me guru.
rgds,
nantha

Hi,
Valuation category is used if you want to have a split valuation i.e. you have an option of differentiating partial stocks of material according to particular criteria & handling them differently regarding valuation within a plant.
Why Required? : 1)Your valuation of Brunei & M'sia may be different
Following configuration reqd.
1)In global setting we have to define Valuation category( Say storage Location) & Valuation type( Brunei & M'sia
2) Active split valuation in MM
3) Assign valuation type to category in customizing
5) In Material Master enter valuation category in accounting view & choose price control V
6) Extend Material Master view for both valuation type
7) valuation category to be active /assign for plant
8) In local definition Define Valuation category to Valuation area.
Then for every transaction (Valuation relevant) may be GR, GI, and Phy. Inventory you must mention valuation type during transaction to get your material valuated separately.
By this u will able to map your requireemnt & able to valuate diffrently.
Vivek

How do you change the Print Products Store from USA to UK like you can do in IPhoto?

How do you change the Print Products Store from USA to UK like you can do in IPhoto?

Please keep in mind that Aperture is not an enhanced iPhoto, it is a different application with a different philosophy and a different intended audience. If you approach it with that in mind you will have a lot less frustration as you learn Aperture.
Aperture adds a layer of complexity that is not needed by many. iPhoto is a very powerful application and fits the needs of many amateur photographers.
As for your original issue, as I said I am surprised that iPhoto allows you do switch countries like that and am not surprised that Aperture doesn't. If this is something you really need to do working in Aperture but using iPhoto to order the prints is a good work around and will not be all that difficult to do once you get the hang of it.
As for your new question, the books in iPhoto and Aperture are different enough that the code that created the book in iPhoto wouldn't work in Aperture. What happens when you import an iPhoto library into Aperture is that the images in the book are combined into an album in Aperture with the same name as the iPhoto book. You will need to re-create the book in Aperture uaing the images in this album.
Hope this helps, post back if you have anymore questions.
regards

Production order changes through sales order

Mine is a MTO business process. I am using strategy 50. when ever I create a production order from the planned order its getting attached to the sales order which is expected and obivous. when ever the sales order gets rescheduled its also re scheduling production orders. this is also expeceted. this rescheduling thing is happening even after I release the order until some cost is incurred on the order( until the first confirmation is done). this is causing the proble. so whats happeing is we release the production order Print it. we have a wait time of approx 30 to 40 after we print and we start manufacturing. in this mean time when something changes in the sales order even the credit card info the sales order. the sales order trys to perform a mateerial availability check which is rescheduling the production order and placing it back from released status to created status. this is causing the problem.

Try this.
1. Create a Status profile in bs02.
2. you can use the standard profile PP000001 Status profile ProductionOrder
3. Assign this profile as header for your production order type in OPJH.
4. Now when you create and release thep roduction order the - Release status would be set by the system
5. AFter you have release manullay select the status profile in the prod order header and mark the RLLK Release locked
6. So next time without deactiviting this check mark in the status profile you wil not able to release the order
so kindly check this option and let me know for clarfications
reg
Dsk

Stor loc stock to be excluded forone plant during planning run in PPDS

Hi All
I want stock from one particulat storage loc from one plant only to be excluded from MRP planning in PPDS.
I have activated in SPRO R3 -MRP , Storage location to be excluded from MRP
Now, I have a list of material master data in R3 and also in APO under the plant and stor loc. Also the integration model exists for material and stor loc stock
Do we need to change the master data in R3 for the stor loc indicator in MRP4 view for each and every material in R3 and then re activate the integration model
If not, is there any other process or transaction which automatically does?
Pls thr me some light on this
regards
Vijay

Vijay,
You should activate the MRP 4 view indicator. The MRP cutomizing is only for defualting the value during material master creation. The material master setting is only considered in MRP run. I am not sure about the integration model.
Regards
Ram

Exclude availability check for a particular stor. loc.

Hi,
I need to exclude a stor. loc. for availability check. MRP should not be excluded.
How can I do that?
Thanks in advance.
Sonal

Hi ,
For exclude the storage location from availability check plz follow the below
1. Go to transaction OPPJ
2.Select Determine Check
3.Select the availability type which you use and go to details
4.There you can find the Storage location check tab
5.put the check mark in No Storage location inspection and save.
So that the storage location will not be included.
Hope it will clear you.
Regards,
Vijay.

Every time system create new production order after releasing sales order c

Hi Guru,
FG material strategy: 82 (sales order creates production order).
After creating the sales order it goes in to credit block. Whenever we release sales order from credit block through VKM1, system has created production order. We confirmed this production order and delivered.
But after this sales person change the sales order value, because of which again sales order goes into the credit block and after releasing sales order from credit block system create new production order even if one production order already confirmed and delivered against the same sales order.
*Every time system create new production order after releasing sales order credit block.
Thanx & regards
pnu

PNU,
So, to restate:
In MD04, you have Unrestricted Sales order Stock ('E' Stock) on hand.
In the same MRP segment, and against the same Storage Location as the stock, you have a Sales Order requirement that was recently blocked and unblocked.
During the unblocking event, the system produced a new production order.
This is not normal. If the above accurately depicts your situation, I would look for an altered Strategy 82, or a userexit. SAP ATP (the beginning event of the Strat 82 process) will normally first check for the availability of stock. Only if the stock is not available, then it will create the new production order.
Best Regards,
DB49

Production Stor Loc (Prod Order GR location) per Order Type

Similar Messages

Maybe you are looking for