As per scope of list order type has changed in ME57

Hi,
I have created PR in doc type NB and using t-code Me57 i have tried to create PO, with selection scope of list A it is going correct means as per the requirement order type shows ZAB and when i select scope of list ZALV which has customized then tried to create PO now order type shows NB.
Please guide me.
Thanks
Shital

Hi,
I have tried this and scope of list A is working but ZALV is not working
Thanks
Shital

Similar Messages

Order type has not been defined in sales area '1000','10','00'

Hi Gurus
I am getting this error when try to create order
Order type has not been defined in sales area <'1000','10','00'>
but I checked in the configuration and assigned
SPRO:SALES:SALES : DOCUMENTS :SALE3S DOCUMENTS HEADER:
ASSIGN SALES DOCUMENT TYPES : Assign sales order types permitted for sales are :1000 -10-00
But still I am getting this problem when trying to creates sales order from va01.
Thanks
Kris

SPRO --> Sales & Sistribution --> Sales --> Sales Document Header --> Assign Sales Area to Sales Document Type
The above is one option.
Also Check Sales Document Type in T.Vode: VOV8
SPRO --> Sales & Sistribution --> Sales --> Sales Document Type
whether The Sales Document Type is Block, which could also be a possible reason.
Also check the Sales Area setting.
Regards,
Rajesh Banka
Reward points if useful.

Internal Order type - Configuration change

Hi
I have created an Internal Order type in January and we have create internal orders under that order type in our production server and have used those as well.
I want to remove the revenue posting tick which has been allowed in this order type which was done at the time when the order type was created.
If I remove the revenue posting setting now, do i need to replace the internal orders which has been created under that order type with new ones after the configuration change? OR will the entries posted earlier (before the configuration change) work according to the old order type settings and will the order work according to the new settings after the change date?
Thanks
Trishan

Hi,
Don't you know if there is any program that updates the old order master data, according to posterior changes in the order type?
Thanks. Best regards,
Cátia

Can order type be changed once it was created?

Hi,
Is there any possible way to change the production order type after it was created?
Thanks!
Wesley

Wesley,
Since it is a custom order type it all depends on its configuration. Probably you need to check from the settlement side as what would be effect. If both the order types are settling to MAT(Material) then I dont see an Issues of wrong order type, the other thing may be interms of any custom reporting taken based on order type.
If you still feel that this needs to be sorted out. You can reverse the confirmation and Goods movment from the wrong order(Order type) and then set deletion flag to it, then create a new order with correct order type and perform Confirmation and Goods movement.
Regards,
Prasobh

If my IPHONE 5 order status has changed from "processing" to "preparing for delivery" is there a chance I will receive it sooner than the 10/5 date that it is scheduled for?

I pre-ordered my iPhone 5 on 9/15 at 4am EST. It said shipping in 2 weeks with an delivery date of 10/5... yadda yadda yadda. This morning my order status showed as 'processing'. This afternoon it changed to 'preparing for delivery'. Is there a chance I will now receive before 10/5? Trying to plan accordingly. Thanks in advance for any info you can give.

I was in the same boat. I ordered @ 5:09AM EST on 9/14 and had the 10/5 delivery date. My status changed from processing to preparing to ship yesterday 9/21. I got an e-mail from Apple @ 4:22AM this morning 9/22 that it has shipped (along with the precious tracking #)! I would expect it would arrive by this Friday 9/28 at the latest.

Visa Charged - Order Status has Changed

Looks like those of us that ordered on the verizon site on 9/14 might get the iPhone 5 before or on 9/21/12
My CC was just charged and finally the order status page has been updated.

it's looking good.. after finally getting billed and getting screenshot above.. I called CS and followed automated menu - option 4 and say "order status" -- automated response says "order has shipped and will receive in two business days"

Why the data type has changed to number from integer?

SQL> create table t3(id integer);
Table created.
SQL> desc t3;
Name Null? Type
ID NUMBER(38)

Yes you are right, but obviousely Oracle represents INTEGER as NUMBER(38) internally, which meens that you do not have decimal digits.
see my demo:
1 create table test_i
2* (col1 integer)
SYS @10gR2 SQL > /
Table created.
SYS @10gR2 SQL > desc test_i
Name Null? Type
----------------------------------------- -------- ---------------------------- COL1 NUMBER(38)
SYS @10gR2 SQL > insert into test_i values(10.2);
1 row created.
SYS @10gR2 SQL > select * from test_i;
COL1
10
SYS @10gR2 SQL > insert into test_i values(10.6);
1 row created.
SYS @10gR2 SQL > select * from test_i;
COL1
10
11
=;-)
Lutz

Default file type has changed for Illustrator CS5.1 - Please help!

I am using Illustrator CS5.1 and have just noticed that whenever I try to open a new document (file/New...) the document is a PDF instead of an AI file. How do I change it back to AI? - Not sure how it changed to PDF in the first place.

How exactly are you determining the file is a .pdf? What platform/OS version are you on? What file extension (letters after period) is on your files, what format does your save as show?
If your icon is a .pdf icon and clicking on the file later opens in Acrobat, then your file association is not assigned properly. On a Mac Command I on a selected file saved by illustrator, and change open with from acrobat to Illustrator, then click CHANGE ALL.
There are more possibilities to why this can happen, please answer the questions at the beggining of this post should you need more help.

Where i could get know each order types's internal format

Dear expert,
Whcih table or from where could i get to know the internal format for each sales doc type...
For example:
KM equals to CQ
TA equals to OR..
Etc...
For my Z customrized order type, does there also have one internal format order type??
Because we are using LSMW to upload open Sales orders....The order type has to be indicated as internal format...
Thank you very much.

dear hoo laa,
let me divide you question into three parts:
1.A.this is to inform you that there is no different formats for each sales document type.
one single format for all but here basing on the control features of that particular sales document types proto types are different.
Eg: base model is one and the same. like bajaj 110cc, 125cc, 150cc, 180cc, 200cc, 220cc. here we are having only one blue print for all models but proto types are different.
2.
For my Z customrized order type, does there also have one internal format order type??
2.A. the sales order which you have copied from.
3.Because we are using LSMW to upload open Sales orders....The order type has to be indicated as internal format...
3.A. it depends on your requriment how the sales orders are uploaded because you know which field to consider and which field not to consider while uploading.
hope this is help ful for solving your issue.
regards,
balajia

Not able to include PM order type PM03 in integration model

Hi Experts,
I am creating PM order in R/3 with order type PM03. But while creating the integration model for maintaince order, PM03 is not populating. and others I am getting like PM01, PM02 etc...
Please advise if I need to do some setting for the same.
Thanks
Hitesh

Hi,
Request you to cross check whether the PM03 order type has the below two check box active in IMG. 9 Tcode = OIOA
Open Item Management and Release Immediately.
PM03 order type with the above settings are getting reflected for me in my integration model.

Change order type based on sold to party

Hi all,
Is there any user exit to change the order type based on Sold to party.
Eg: if any user select some sold to party during sales order creation then using sold to party the order type is changed.
Any suggestions welcome.
Regards,

Hi Navadeep,
Please try with these
The program MV45AFZB
USEREXIT_CHECK_VBAK
This user exit can be used to carry out additional checks (e.g. for
completion) in the document header. The system could, for example,
check whether certain shipping conditions are allowed for a
particular customer group.
The program MV45AFZZ
USEREXIT_FIELD_MODIFICATION
This user exit can be used to modify the attributes of the screen
fields.
To do this, the screen fields are allocated to so-called
modification groups 1 - 4 and can be edited together during a
modification in ABAP. If a field has no field name, it cannot be
allocated to a group.
The usage of the field groups (modification group 1-4) is as
follows:
-   Modification group 1:   Automatic modification with transaction
    MFAW
-   Modification group 2:   It contains 'LOO' for step loop fields
-   Modification group 3:   For modifications which depend on check
    tables or on other fixed information
-   Modification group 4:   is not used
The FORM routine is called up for every field of a screen. If you require changes to be made, you must make them in this user exit.
This FORM routine is called up by the module FELDAUSWAHL.
See the Screen Painter manual for further information on structuring
the interface.
USEREXIT_SAVE_DOCUMENT
Use this user exit to fill user-specific statistics update tables.
The user exit is called up by the FORM routine BELEG-SICHERN before
the COMMIT command.
Note
If a standard field is changed, the field r185d-dataloss is set to
X. The system queries this indicator at the beginning of the safety
routine. This is why this indicator must also be set during the
maintenance of user-specific tables that are also to be saved.
USEREXIT_SAVE_DOCUMENT_PREPARE
Use this user exit to make certain changes or checks immediately
before saving a document. It is the last possibility for changing or
checking a document before posting.
The user exit is carried out at the beginning of the FORM routine
BELEG_SICHERN.
I hope it will help you,
Regards,
Murali.

Internal Order types deletion

Hi,
Is it possible to delete the internal order types once created in development system.
if yes what are the implications?
regards,
Satya

Hi,
Is the Development and Testing client in the same server... I mean if you have not released the transport request you can delete the desired order type and save in the same transport request for transporting to production.
If you have already released even then you can delete the order type and store in the change request and transport it to production. you will not have the deleted order type in production.
As you were mentioning that you have already posted some entries in your IO.... set the deletion flag for the internal orders which wear created using this order type in change mode or and go to T.Code: OKO5 or use this programme in T.Code: SE38 RKODEL01 for deleting the Internal orders... after which you can delete your order type.
Regards

Changing Residence time in Order type SPRO

Hi All
I have to change the Residence time in the order type customization . This is required to archive the production orders just after deletion
When I Save the changes in the test system I get a message
"Compare the number range group of the target and source system" (CS 067)
I checked the number range in CO82 for the Order type Where changes are to be made
In both the Test & Production system the Number range For FROM Number & TO Number is the same
Hope I can transport the changes to Production . Just wanted to make sure If I need to check anything else befire transporting the same
Thanks in advance

Sathibabu,
Please check the number range group assigned to the Order type, this should be same. Number range group is then assigned with number range. You can check the number range group in OPJH and number range/group in CO82.
Regards,
Prasobh

Slow Speed after Latency type has been changed

Hi,
the last few days I have noticed that my broadband speed has gone down hill big time.. according to speedtester.bt.com my DSL connection rate is: 20504kbps (down-stream) and my IP Profile is 18090kbps, but my download speed is 2411kbps which is below the acceptable range for my connection.
I logged onto my BTHH3 and found that my latency type has changed from Interleaved to Fast, I have noticed that my CRC & HEC (down) are much higher than before..
Should I leave it for a few days to see improvment or ask the mods to change the latency type back to Interleaved
Thanks in Advance
Andy
VPI/VCI:
0/38
Type:
PPPoA
Modulation:
G.992.5 Annex A
Latency type:
Fast
Noise margin (Down/Up):
3.7 dB / 5.0 dB
Line attenuation (Down/Up):
18.2 dB / 9.4 dB
Output power (Down/Up):
16.4 dBm / 12.7 dBm
FEC Events (Down/Up):
0 / 21224
CRC Events (Down/Up):
102683 / 4252
Loss of Framing (Local/Remote):
0 / 0
Loss of Signal (Local/Remote):
0 / 0
Loss of Power (Local/Remote):
0 / 0
HEC Events (Down/Up):
722956 / 10595
Error Seconds (Local/Remote):
2061 / 2095

Results from Speedtester.bt.com
Download speedachieved during the test was - 3887 Kbps
For your connection, the acceptable range of speeds is 4000-21000 Kbps.
Additional Information:
Your DSL Connection Rate :20376 Kbps(DOWN-STREAM), 1176 Kbps(UP-STREAM)
IP Profile for your line is - 17976 Kbps
Upload speed achieved during the test was - 917 Kbps
Additional Information:
Upstream Rate IP profile on your line is - 1176 Kbps
I also re-installed my BT HH2 and that connects using Interleaved as to Fast via BT HH3, while my HH2 is connected I get 15.82mbps via speedtest.net but I keep losing my connection - don't think my HH2 likes 3.7 dB (down) noise margin.. but if I re-connect my HH3 I have a steady connection but 1.6 to 2.2mbps via speedtest.net
I think its time to get a new non-bt router/modem....?

Assignment of Order Category to Order Type

Good morning!
Question regarding Order Category assignment:
I am in the following path location in SPRO:
Plant Maintenance and Customer Service->Maintenance and Service Processing->Maintenance and Service Orders->Functions and Settings for Order Types->Define Change Docs, Collective Purc. Req. Indicator, Operation No. Interval
Looking at this configuration, I noticed that our Order Category values are not consistent. (you can view Order Category by clicking on the 'print' button once configuration screen is open - view name is V_T399X_S).
Possible entries for Order Category are the following:
01     Internal Order (Controlling)
02     Accrual Calculation Order (Controlling)
03     Model Order (Controlling)
04     CO Production Order
05     Product Cost Collector
06     QM Order
10     PP Production Order
20     Network
30     Maintenance order
40     Process Order
50     Inspection Lot
60     Personnel Order
70     Shipping deadlines
I would assume that all of my PM order type should have category assignment of 30. However, some of my PM order types hold no assignment. Can someone explain the following two points:
1. Where in SPRO is Order Category assigned to Order Type
2. What is the purpose of Order Category.
Thank you very much in advance!
Alex

Hi Narasimhan,
The view I am looking at is one behind the config which is located in this step:
Plant Maintenance and Customer Service->Maintenance and Service Processing->Maintenance and Service Orders->Functions and Settings for Order Types->Define Change Docs, Collective Purc. Req. Indicator, Operation No. Interval
View is: V_T399X_S (Increment for Automatic Operation Number)
My point of confusion pertains to the fact that category field is null for order type belonging to three of our plants. From the data integrity perspective, I don't see how this would be possible, given that this assignment is performed by SAP automatically. My only theory would be that it happened during SAP upgrade, or that there is a problem with how the view is written.
Thank you!
Alex

As per scope of list order type has changed in ME57

Similar Messages

Maybe you are looking for